Diffuser Braze Development

Abstract

At the request of SRTE, through the PDRD project, SRNL is developing a vacuum brazing process to facilitate the fabrication of hydrogen purification systems. In particular, this effort is directed at tube-style hydrogen diffusers. The diffusers are comprised of numerous palladium-silver tubes that are brazed to a nickel fitting, which is subsequently welded to a stainless steel tube, fitting, or tube sheet. Historically, torch brazing has been used as a heat source; for this work vacuum furnace brazing was suggested to improve the uniformity of the process. This report describes the braze process development for braze selection and simple nickel fitting to tube brazing. Five braze alloys were selected and sessile drop testing was conducted over a range of temperatures from 25 to 75° C over the liquidus temperature. Samples were characterized for wetting angle, erosion, and brazability. The cup-to-tube braze joints were inspected using digital radiography, ultrasonic testing, and metallographic examination. Two of the five alloys exhibited excellent fabrication properties and are considered for further development.