Engineering topics

Bayard, David S.

Publications and source records attributed to Bayard, David S..

84 records · Page 5

NASA NTRS1990

Experimental study of robustness in adaptive control for large flexible structures

An experimental study is performed to investigate the robustness of model reference adaptive control for the large flexible structures control application. The main nonidealities of concern are unmodeled dynamics, input saturation, and time delay effects (here, actuator and sensor dynamics are lumped into the last item for convenience). This study focuses on the robustness with respect to input saturation and time delay effects, since robustness to unmodeled dynamics is inherent to the basic algorithm and has been demonstrated experimentally elsewhere.

Ih, Che-Hang Charles↗

NASA NTRS1988

Adaptive Control For Space-Station Joints

Input gain weighting added to existing adaptive-control algorithm. Report discusses concept for adaptive control of rotations of various appended structures about joints on space station, with suppression of vibrations in both station and appendages. Concept relevant to such terrestrial applications as control of aircraft, suppression of vibrations in large buildings, and robotics.

Ih, Che-Hang Charles↗

NASA NTRS1988

New class of control laws for robotic manipulators. I - Nonadaptive case. II - Adaptive case

A new class of exponentially stabilizing control laws for joint level control of robot arms is discussed. Closed-loop exponential stability has been demonstrated for both the set point and tracking control problems by a slight modification of the energy Lyapunov function and the use of a lemma which handles third-order terms in the Lyapunov function derivatives. In the second part, these control laws are adapted in a simple fashion to achieve asymptotically stable adaptive control. The analysis addresses the nonlinear dynamics directly without approximation, linearization, or ad hoc assumptions, and uses a parameterization based on physical (time-invariant) quantities.

Wen, John T.↗

NASA NTRS1988

On-orbit parametric identification methodology

On-orbit system identification (ID) of large space systems is essential for various reasons. For example, the complex composite structure of such systems cannot be ground-tested; their structural dynamic characteristics must be known accurately in order to accomplish active control. Furthermore, such capability can be used to characterize/identify various disturbances. The identification process is consisted of four principal elements: (1) modeling, (2) the estimation algorithm, (3) input system, and (4) measurement system. These elements are highly correlated and all togerher determine the success of the identification problem. Accurate modeling of large space systems is the most important element of the identification process. Large flexible structures are non-linear and infinite dimensional systems with highly coupled parameters and low frequency packed modes. In addition, these systems are subject to stochastic and time-varying disturbances, they have structural parameters which can vary due to on-orbit assembly deployment, and operations. These systems are generally; however, represented by constant coefficient, finite order differential equations. The non-linearities, coupling and noise effects are also often neglected. Moreover, identification experiment designs which lead to highly complex optimization problems usually require the simultaneous choice of ID algorithm, sensor, and actuator type and placement. On-orbit bandwidth and power restrictions on excitation, limited data window, and restrictions on sensor/actuator type, placement and number, has led to practical questions of implementations.

Hadaegh, Fred Y.↗

NASA NTRS1988

Adaptive Control For Flexible Structures

Paper discusses ways to cope with measurement noise in adaptive control system for large, flexible structure in outer space. System generates control signals for torque and thrust actuators to turn all or parts of structure to desired orientations while suppressing torsional and other vibrations. Main result of paper is general theory for introduction of filters to suppress measurement noise while preserving stability.

Bayard, David S.↗

NASA NTRS1988

Adaptive control experiment with a large flexible structure

A large space antenna-like ground experiment structure has been developed for conducting research and validation of advanced control technology. A set of proof-of-concept adaptive control experiments for transient and initial deflection regulation with a small set of sensors and actuators were conducted. Very limited knowledge of the plant dynamics and its environment was used in the design of the adaptive controller so that performance could be demonstrated under conditions of gross underlying uncertainties. High performance has been observed under such stringent conditions. These experiments have established a baseline for future studies involving more complex hardware and environmental conditions, and utilizing additional sets of sensors and actuators.

Ih, Che-Hang Charles↗

NASA NTRS1988

A new class of energy based control laws for revolute robot arms - Tracking control, robustness enhancement and adaptive control

A class of joint-level control laws for all-revolute robot arms is introduced. The analysis is similar to the recently proposed energy Liapunov function approach except that the closed-loop potential function is shaped in accordance with the underlying joint space topology. By using energy Liapunov functions with the modified potential energy, a much simpler analysis can be used to show closed-loop global asymptotic stability and local exponential stability. When Coulomb and viscous friction and model parameter errors are present, a sliding-mode-like modification of the control law is proposed to add a robustness-enhancing outer loop. Adaptive control is also addressed within the same framework. A linear-in-the-parameters formulation is adopted, and globally asymptotically stable adaptive control laws are derived by replacing the model parameters in the nonadaptive control laws by their estimates.

Wen, John T.↗

NASA NTRS1988

EOS integrated payload articulation and identification system

This paper describes an autonomous control concept for pointing and articulation of science instruments on the EOS NASA/NOAA platforms intended to be operational by the late 1990s. Key features of this concept include advanced control adaptation and tuning strategies which provide performance robustness over a wide range of system uncertainties and mission time criticality. System identification-control modification paradigms are synthesized to form an adaptation continuum over this extended regime of autonomous operations.

Mettler, Edward↗

NASA NTRS1988

A forward method for optimal stochastic nonlinear and adaptive control

A computational approach is taken to solve the optimal nonlinear stochastic control problem. The approach is to systematically solve the stochastic dynamic programming equations forward in time, using a nested stochastic approximation technique. Although computationally intensive, this provides a straightforward numerical solution for this class of problems and provides an alternative to the usual dimensionality problem associated with solving the dynamic programming equations backward in time. It is shown that the cost degrades monotonically as the complexity of the algorithm is reduced. This provides a strategy for suboptimal control with clear performance/computation tradeoffs. A numerical study focusing on a generic optimal stochastic adaptive control example is included to demonstrate the feasibility of the method.

Bayard, David S.↗

NASA NTRS1988

Optimal experiment design for on-orbit identification

An optimal on-orbit experiment is designed to extract the most information from an on-orbit test, subject to the constraints of the testing environment. However, simply jumping in and optimizing standard measures of information with respect to the experiment design can cause severe problems if attention is not paid to the specific needs and properties of the problem at hand. The actual criteria to be optimized depends on (among other things) the particular ID algorithm and parametrization being used. Two parametric techniques are the focus of this presentation: recursive prediction error method (RPEM) and maximum likelihood estimation (MLE).

Bayard, David S.↗

NASA NTRS1987

Proof of quasi-adaptivity for the m-measurement feedback class of stochastic control policies

Bounds on expected performance are established which show that the m-measurement feedback (mM) policy for nonlinear stochastic control performs as well or better than the open-loop optimal control policy, and thus is quasi-adaptive in the sense of Witenhausen (1966). The chain of performance inequalities indicate a tendency for the mM policy performance to improve with increasing m. It is suggested that the present analytical method, based on the construction of artificial control sequences denoted as utility controls, can be used to establish performance bounds on other well-known policies, avoiding the extensive Monte Carlo simulations necessary in comparing stochastic control policies.

Bayard, David S.↗

NASA NTRS1987

Adaptive control for flexible space structures with measurement noise

Simulation results are presented to address the problem of measurement noise in the design of adaptive controllers for large flexible space structures. In order to reduce the unrealistically high overall control demand resulting from the presence of leakage terms, a method has been developed for the introduction of noise filters into the adaptive controller while at the same time ensuring the global stability of the adaptive algorithm. A branch filter allows filtering of the output error without introducing phase lag into the adaptive loop. The technique is demonstrated in the simulation of an adaptive payload articulation control for a Space Station model.

Bayard, David S.↗