Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multilayer film”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Deposition of very thick Mo/Al multilayer films using magnetron sputtering

To understand materials at extreme conditions dynamic ramp compression techniques/experiments are critical, and gradient density impactors (GDIs) have the potential to enable high quality experiments. Very thick (i.e., hundreds of μm thick) multilayer films consisting of high z/low z layers with a gradient in z through the stack can serve as a GDI. Surprisingly while there is a large amount of literature on the topic of multilayer films, there is an absence of literature on very thick multilayer films. A number of multilayer film systems deposited by dc magnetron sputtering were evaluated as potential candidates, including Cu/Al, Ta/Al, and Mo/Al. The Mo/Al multilayer system was observed to be the most promising candidate and is the primary focus of this paper. Mo/Al multilayer films up to ∼400 μm thick with reasonable thickness uniformity were deposited.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Investigating the Role of Acid Sites in the Hydrocracking of Polyethylene-EVOH Multilayer Film Waste over Pt/BEA Catalyst

Multilayer polymer films (MFs) containing poly(ethylene-co-vinyl alcohol) (EVOH) and polyolefins are ubiquitous in single-use food and medical packaging. MFs are currently landfilled or incinerated rather than mechanically recycled because of the processing difficulties associated with their form factor and complex multicomponent structures. Advanced chemical recycling is a promising solution. Prior reports have explored hydrogenolysis and hydrodeoxygenation to convert EVOH, but these technologies are limited by catalyst deactivation and slow apparent kinetics, respectively. Alternatively, in this work, we demonstrate the efficient hydrocracking of commercial MFs into naphtha range (C5-C12) alkanes over platinum (Pt) supported on acidic zeolites. Mixtures of low-density polyethylene (LDPE) and EVOH are utilized as MF surrogates to gain fundamental insights. Pt deposited on BEA supports with varying Lewis acid site (LAS) concentrations are synthesized and tested for hydrocracking. Surprisingly, Pt/BEA with high LAS concentrations demonstrate improved activity for LPDE/EVOH blends over LDPE alone. In contrast, LAS concentrations are shown to have no influence on LDPE hydrocracking. LAS and Brønsted acid sites (BAS) catalyze the dehydration of EVOH to form water, which improves LDPE hydrocracking. Polyaromatics formed primarily via EVOH thermal degradation lead to detrimental coke formation, which hinders hydrocracking activity. Reaction conditions and feed ratios of LDPE and EVOH are tuned to balance these competing effects. Reusability tests demonstrate that Pt/BEA maintains high activity (81% conversion in 2 h) and high selectivity towards naphtha (78%) over multiple reuse cycles. Furthermore, these findings position hydrocracking as a promising technology for the circularity of complex MF plastic waste.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Shear Band Formation in Thin-Film Multilayer Columns Under Compressive Loading: A Mechanistic Study

Micro-pillar compression is a popular experimental technique used for characterizing the mechanical behavior of nano- and micro-laminates. The compressive stress–strain response of the column-shaped thin-film composite can be measured, and the deformation and damage features can be revealed by post-test cross-section microscopy. The development of plastic instability in the form of localized strain concentration (shear bands), leading to eventual failure, is frequently observed. In the present study, a computational approach is used to illustrate the commonality of shear band formation from a continuum standpoint. Systematic finite element analyses are conducted, showing that the strain field tends to become localized once plastic yielding commences. Distinct shear offsets of the layered structure can be revealed from the numerical model, which is similar to those observed in experiments. The actual appearance of shear bands depends on the materials’ constitutive behavior and precise geometries. Post-yield strain hardening reduces the propensity of shear band formation, while strain softening enhances it. Imperfections such as the undulated layer geometry, as well as the frictional characteristics between the specimen and test apparatus, can also influence the shear band morphology and overall stress–strain response.

finite element modeling↗
DOE OSTI2025

Evolution of the Electronic Gap of Directly Synthesized Versus Mechanically Transferred WS 2 Monolayer to Multilayer Films

The electronic properties of 2D materials play a critical role in determining their potential for device applications. Despite rapid developments in 2D semiconductors, studies of fundamental electronic parameters, including the electronic gap and ionization energy, are limited, with significant discrepancies in reported values. The study focuses on tungsten disulfide (WS₂) and investigates the electronic structure of films comprising an increasing number of layers deposited with two different methods: direct synthesis via metal–organic chemical vapor deposition (MOCVD) and additive mechanical transfer of exfoliated single layers. The films are characterized via Raman, UV–vis, and photoluminescence spectroscopies, as well as ultraviolet photoelectron and inverse photoemission spectroscopies (UPS/IPES). The electronic gap of WS₂ is found to decrease from 2.43 eV for the monolayer to 1.97 eV for the trilayer, indicating a bulk transition at the trilayer thickness. This reduction in the electronic gap is primarily due to the downward shift of the conduction band minimum relative to the valence band maximum. A comparative analysis with MOCVD-grown WS₂ reveals a slightly larger electronic gap for MOCVD-grown samples, attributed to differences in defect densities. The electronic levels evaluated through UPS/IPES highlight the significant influence of preparation methods on the electronic properties of WS₂.

2D materials↗
DOE OSTI2026

Catalytic Autoxidation for Depolymerization of Multilayer Plastic Films

Recycling multilayer plastic films is challenged by a diversity of polymers, prompting development of new recycling methods. For the depolymerization of mixed polymers like those in multilayer films, metal-catalyzed autoxidation offers a versatile chemical recycling method to deconstruct multiple polymers to useful oxygenates. Here, we demonstrate that catalytic autoxidation is effective for depolymerizing multilayer films across diverse chemistries. We investigated conditions for a model polyethylene substrate using a Co, Mn, and Br cocatalyst system, achieving full carbon closure with oxygenated small molecules contributing up to 48 mol% carbon. Subsequently, we characterized product distributions for several common polymers used in multilayer films using high-resolution mass spectrometry (HRMS) and developed analytical methods to quantify the resulting complex product streams. Optimized conditions for polyethylene were applied to 11 multilayer plastic films containing 10 different polymers, including films with nonpolymeric potential disrupters like aluminum foil and titanium dioxide, showing that catalytic autoxidation is effective across a broad range of polymer types and is resistant to disrupters and additives. The generation of CO 2 in these reactions overall suggests that both reaction engineering and modifications to the reaction conditions will be required to achieve higher yields of soluble oxygenated products.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Delamination of Multilayer Plastic Films to Recover Polyethylene with Favorable Mechanical Properties

Multilayer plastic films play a critical role in packaging, with each polymer layer contributing specific properties to the multilayer film. Multilayer plastic films are not currently recyclable due to the bound polymers. With multilayer film production of about 20 million metric tons in 2024 and rising, endof- life treatment becomes pressing. This work presents a scalable solvent-based delamination recycling process that is applied to commercial postindustrial multimaterial films to unbind the materials within a multilayer film by dissolving only the adhesive layer and recover polyethylene (PE) as an intact solid film. Solventbased delamination is a simple process that allows the complete recovery of materials and solvents used in the process. The delaminating solvent, 88% formic acid in water, induces delamination of PE/PEI/PET and PE/PU/PET films at 70 °C in under an hour. Recovered PE has no contamination detected by Fourier transform infrared spectroscopy and mechanical properties on par with those of virgin resin. The recovery of high-quality solid PE film fit for reprocessing, at low operating temperatures and with closed-loop solvent reuse, promotes delamination as a low energy consumption and environmentally friendly recycling process. PE recovered from delamination can be reused in equivalent products, promoting circularity of multimaterial films.

chemical recycling↗
DOE OSTI2026

Delamination recycling of multilayer plastic films: Solvent-assisted separation pathways and recovery of solid polyolefins

Multilayer plastic films are excellent packaging materials due to the bound layers of multiple polymers, with each different polymer contributing to the film properties. Desirable properties lead to continuously growing demand for multilayer films. Multilayer plastic films are typically single-use and, as such, their increased production and disposal have led to waste management problems. Multilayer films are not currently recyclable primarily due to the multiple bound polymers. This work advances delamination as a recycling process to separate and sequester valuable polymers from multilayer films, facilitating the incorporation of these polymers into the circular economy. We effect delamination in a physical process that preserves targeted polymers as solid film, hence retaining their embodied energy. This work documents three different pathways of inducing delamination of multilayer films, with appropriate solvents disrupting adhesion between adjacent layers or dissolving a minor component of the film in less than an hour and at temperatures below 90°C, and where all initial polyethylene is maintained in its solid form throughout the process and is recovered at high purity. Solvent-based delamination is exemplified on commercial multilayer films with majority polyethylene (PE), and polyethylene terephthalate (PET) or ethylene vinyl alcohol copolymer (EVOH) or nylon also present. Solvent-based delamination is an energy-efficient and environmentally friendly recycling process that improves upon dissolution-precipitation recycling, since delamination involves very little dissolution and no precipitation, and is superior to pyrolysis which breaks down the polymers, while delamination keeps polymer chains intact. Furthermore, delamination recycling can contribute to the sustainable use of multilayer films as they continue to protect our food and medicine.

Chemical Recycling↗
DOE OSTI2025

Screening green solvents for multilayer plastic film recycling processes

Multilayer (ML) plastic films are essential packaging materials that help protect products from diverse external factors; however, only 5% of all ML films are recycled in the United States. Solvent-based technologies are a promising alternative for recycling ML films because they enable recovery of constituent polymer resins. For example, the Solvent Targeted Recovery and Precipitation (STRAPTM) process sequentially dissolves and separates polymer components using a series of targeted solvent washes. A crucial design aspect of this process is the impact of selected solvents on human health and on the environment. Here, this work introduces a computational framework that integrates molecular modeling, process modeling, techno-economic analysis (TEA), and life-cycle analysis (LCA) to quickly screen green solvents for solvent-based ML recycling processes. Initial screening for solvents based on selectivity is performed by estimating temperature-dependent solubilities using molecular-scale models. Subsequent screening uses basic estimates of energy use and octanol-water partition coefficients (logP) as key measures of health, safety, and environmental hazards. Detailed process modeling, TEA, and LCA are used on a reduced set of promising solvents identified in early screening steps to more accurately determine how solvent selection and associated operating conditions impact overall economics and environmental impacts. The framework is used for the identification of green solvents (from a database of 1,000 solvents) that separate an industrial ML film composed of polyethylene (PE), ethylene vinyl alcohol (EVOH), and polyethylene terephthalate (PET). Our analysis shows the effectiveness of the framework and reveals fundamental trade-offs between solvent greenness, solubility, and economics. Our work emphasizes the importance of taking a holistic systems view during solvent design and aims to inform the development of new processes for ML film recycling and the identification of new ML films that are easier to recycle.

economics↗
DOE OSTI2025

Thick graded interfaces increase wear resistance in Ti/TiN nanolayered thin films

Multilayered composites with nanoscale layer thickness incorporating titanium and titanium nitride (Ti/TiN) are used as a model system to study the effects of heterophase interface structure on elastic and plastic deformation, as well as wear behavior. Here, in this work, hardness, modulus, and wear rate under dry reciprocating sliding contact are quantified as a function of Ti-TiN heterophase interfacial nitrogen gradient thickness for Ti/TiN multilayers with 10–80 nm layer thickness. Hardness and modulus are found to be inversely proportional to layer thickness and independent of interface gradient for most specimens. Wear rate is found to be inversely proportional to interface gradient thickness at constant layer thickness, demonstrating that control of nanoscale interface structure is a valid approach to enhancing wear behavior. The materials studied in this work wear comparably or slower than other Ti- and TiN-based composites in the literature, providing a promising avenue for engineering wear-resistant materials for use in industrially relevant applications.

Graded interfaces↗
DOE OSTI2026

A framework and tool for designing cost-effective, resilient, and circular net-zero supply chains under uncertainty with an application to multilayer plastic films

While 55% of Fortune 500 companies have committed to achieving net-zero emissions and/or zero-waste operations by 2035, only 2% are currently on track, revealing a critical gap between ambition and action. Designing supply chains that reduce both emissions and waste is a complex non-intuitive, multi-objective challenge, compounded by the high costs of new technologies and the need for resilient, profitable solutions. This paper aims to address this challenge by presenting a generic framework and multi-objective optimization formulation for designing cost-effective, circular, and resilient supply chains under uncertainty, implemented through a user-friendly decision-support tool with intuitive data visualization capabilities, enabling communication of results to both technical and non-technical stakeholders. We demonstrate the application of this framework in the context of multilayer plastic films (barrier films), which are widely used in food packaging and composite materials. The model quantifies trade-offs across three objectives: minimizing global warming potential, maximizing circularity, and minimizing cost. A key contribution of this work is the explicit modeling of technological resilience, the ability of supply chains to maintain function under disruption. In the cost-minimization case, the resilience constraint makes the design approximately three times more expensive in the short-term metric, but shifts the system from relying on a single recovery pathway to a portfolio of four recovery pathways, improving the robustness of the optimization solution under uncertainty. Lastly, we introduce TranZero, a decision-support tool that integrates material flow analysis, hotspot identification, and optimization-based scenario planning to support net-zero and circularity decisions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Toward a sustainable circular economy of multilayer plastic films: Life cycle and techno-economic assessment with a focus on end-of-life treatment and multiple recovery cycles

This study presents a life cycle assessment (LCA) and techno-economic analysis (TEA) of end-of-life technologies for treating polyethylene–polyamide barrier film waste, focusing on quality degradation across recovery cycles. Novel treatment methods are experimentally validated, while others are drawn from literature and industry consultations. A displacement approach, assuming no quality loss, is first applied. Results show that solvent-based recycling via the solvent-targeted recovery and precipitation (STRAP) process outperforms alternatives across environmental indicators, reducing global warming potential (GWP) by 40% compared to landfilling. Incineration performs worst in most categories, particularly eutrophication (80% higher than landfilling), due to nitrogen emissions. Experimentally validated downcycling (pelletizing) proves more economically viable. The assumption of infinite recoverability is overly optimistic. To address this, we propose a mathematical framework accounting for a finite number of recovery cycles. This refined model shows reduced GWP and cost savings for solvent recovery, making its benefits less pronounced than initially estimated. Sensitivity and uncertainty analyses reveal strong dependence on recovered material quality and solvent recovery efficiency, underscoring the need for optimized process design. Finally, hotspot analysis identifies greenhouse gas emissions from the polyamide supply chain as the dominant GWP contributor. In conclusion, the results underscore potential trade-offs across pathways and show that solvent-based recovery’s sustainability depends heavily on process conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Multilayer Architecture Barriers for High Temperature Nuclear Applications

Innovative thin film multilayer metal/ceramic barrier coatings have been developed by Argonne National Laboratory to protect fuel cladding against different phenomena that can be encountered under the harsh operating conditions of advanced nuclear reactors. One phenomenon is Fuel-Cladding Chemical Interaction (FCCI), which can represent a challenge to the performance of steel-clad metallic fuels in sodium-cooled fast reactors (SFRs), especially when operating to high burnups at elevated cladding temperatures, and long fuel residence time. Another phenomenon is the corrosion of zirconium-based cladding under prototypic boiling water reactor (BWR) conditions and associated cladding during off normal conditions, including loss of coolant accidents (LOCA). This work provides details of the development and testing of a thin film (few microns) multilayer metal/ceramic (CrY/Y 2 O 3 ) coatings on steel cladding and its performance against FCCI. The coating architecture evolved through systematic mechanical testing, radiation tolerance assessments, and high-temperature diffusion studies from a preliminary multilayer concept to an optimized high-performance design. The optimized structure leverages stoichiometric Y 2 O 3 for its exceptional radiation stability, chemical inertness, and ultra-low fission product diffusivity (e.g., Ce diffusivity ~10 -20 m 2 /s in irradiated Y 2 O 3 at 650 °C). This is paired with ductile chromium-rich interlayers (Cr 95 Y 5 ), which significantly enhance fracture toughness and mechanical resilience. Design refinements, including increased ceramic layer thickness and optimized Cr–Y interlayer composition, eliminated fracture propagation and preserved coating integrity under extreme mechanical stress (>10× typical reactor conditions) and prolonged radiation exposure (~300 dpa). Those conditions are well beyond expected conditions during normal operations in SFR, and cover some of the transient conditions as well. In addition, the coating deposition was demonstrated to be applied uniformly to the inner surface of steel tubes representing prototypic SFR cladding. Another phenomenon under consideration in this work is the corrosion of zirconium-based cladding under prototypic boiling water reactor (BWR) conditions and associated off normal conditions including loss of coolant accident (LOCA). Another multilayer thin film coating is considered for mitigation of this phenomenon, where a coating of yttrium aluminum and yttrium aluminum ceramic/metal thin film coating. Preliminary results on the coating performance during high temperature thermal cycling (up to 1000 C) have shown promising performance of the coating. On-going optimization of the coating will continue in FY26.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

Curvature Induced Modifications of Chirality and Magnetic Configuration in Perpendicular Films

Designing curvature in three-dimensional (3D) magnetic nanostructures enables controlled manipulation of local energy landscapes, allowing for the modification of noncollinear spin textures relevant for next-generation spintronic devices. In this study, we experimentally investigate 3D magnetization textures in a Co/Pd multilayer film, exhibiting strong perpendicular magnetic anisotropy (PMA), deposited onto curved Cu nanowire meshes with diameters as small as 50 nm and lengths of several microns. Utilizing magnetic soft X-ray nanotomography, we achieve reconstructions of 3D magnetic domain patterns at approximately 30 nm spatial resolution. This approach provides detailed information on both the orientation and magnitude of magnetization within the film. Our results reveal that interfacial anisotropy in the Co/Pd multilayers drives the magnetization toward the local surface normal. In contrast to typical labyrinth domains observed in planar films, the presence of curved nanowires significantly alters the domain structure, with domains preferentially aligning along the nanowire axis in close proximity, while adopting random orientations farther away. We report direct experimental observation of a curvature-induced Dzyaloshinskii-Moriya interaction (DMI), which is quantified to be approximately one-third of the intrinsic DMI in Co/Pd stacks. The curvature induced DMI enhances stability of Néel-type domain walls. These experimental observations are further supported by micromagnetic simulations. Altogether, our findings demonstrate that introducing curvature into magnetic nanostructures provides a powerful strategy for tailoring complex magnetic behaviors, paving the way for the design of advanced 3D racetrack memory and neuromorphic computing devices.

Raftrey, David↗
DOE OSTI2025

A fast computational framework for the design of solvent-based plastic recycling processes

Multicomponent plastics cannot be processed using mechanical recycling technologies, hindering efforts to deal with plastic waste. Multicomponent plastics include multilayer plastic films, which are widely used for food and healthcare packaging. Multilayer films combine several layers (potentially dozens) of different polymers to protect products from external factors (e.g., oxygen, water, temperature, shock, and light). Solvent-based separation processes have emerged as a promising alternative to recycle these complex materials. For instance, the Solvent-Targeted Recovery and Precipitation (STRAP TM ) process uses sequential solvent washes to selectively dissolve and separate constituent polymers from multicomponent plastic waste, including films. STRAP TM process design (separation sequence, type of solvents, and operating conditions) changes significantly depending on the design of the multilayer plastic film (e.g., number, types, and proportions of polymers). The ability to quickly quantify the economic and environmental benefits of diverse STRAP TM process designs is essential to accelerate the development of sustainable recycling processes and more recyclable multilayer film products. In this work, we present a fast computational framework that integrates molecular-scale models, process modeling, and techno-economic and life cycle analysis to quickly evaluate STRAP TM designs. The computational framework is general and can be used to study the processing of complex multilayer plastic waste streams that contain many layers. Furthermore, we highlight the different uses of the framework via targeted case studies.

Computational framework↗
DOE OSTI2025

Fractional Skyrmion Tubes in Chiral‐Interfaced 3D Magnetic Nanowires

Magnetic skyrmions are chiral spin textures with rich physics and great potential for unconventional computing. Typically, skyrmions form in bulk crystals with reduced symmetry or ultrathin film multilayers involving heavy metals. Here, the formation of fractional Bloch skyrmion tubes at room temperature is demonstrated by 3D printing ferromagnetic double‐helix nanowires with two regions of opposite chirality. Using X‐ray microscopy and micromagnetic simulations, it is shown that the coexistence of vortex and anti‐parallel spin states induces the formation of fractional skyrmion tubes at zero magnetic fields, minimizing the energy cost of breaking the coupling between geometric and magnetic chirality. Control over zero‐field states is also demonstrated, including pure vortex, or mixed skyrmion‐vortex states, highlighting the magnetic reconfigurability of these 3D nanowires. This work shows how interfacing chiral geometries at the nanoscale can enable advanced forms of topological spintronics.

X-ray microscopy↗