SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A simple algebraic solution is obtained to an optimal control problem in joint space for a general robotic manipulator. Open loop and closed loop control laws are obtained. The resulting control algorithm is similar in form to a commonly used heuristic controller using cubic polynomial trajectories.
Advanced theoretical and experimental developments in field of remote manipulators discussed in conference preprint. Report synthesizes number of sensing and control techniques.
Task board constructed to facilitate time-and-motion studies for remote manipulators. Apparatus equipped with holes, objects of various shapes to be grasped and sensors with switches to indicate contact. Useful in industrial robots programmed to assemble parts.
Concept for control of remote manipulators based on three-level hierarchy allows complex tasks performed in real time. Developed for interactive human/control with sensory feedback.
Display combines bar charts, vector diagrams, and numerical values to inform operator of forces and torques exerted by end effector of manipulator. On voice or keyboard command, eight-channel strip-chart recorder traces force and torque components and claw position of raw measurements from eight strain gage sensors in end effector. Especially helpful when operator's view of end effector is obscured.
An aid concept known as the PIDA (Payload Installation and Deployment Aid) is presented as a way to assist the Remote Manipulator System (RMS) by relaxing the accuracy required during payload handling in the payload bay. The aid concept was designed and developed to move payloads through a prescribed path between the confined quarters of the payload bay and a position outside the critical maneuvering area of the Orbiter. An androgynous docking mechanism is used at the payload/PIDA interfaces for normal docking functions that also serves as the structural connection between the payload and the Orbiter, that is capable of being loosened to prevent transfer of loads between a stowed payload and the PIDA structure. A gearmotor driven drum/cable system is used in the docking mechanism in a unique manner to center the attenuator assembly, align the ring and guide assembly (docking interface) in roll, pitch, and yaw, and rigidize the mechanism at a nominal position. A description of the design requirements and the modes of operation of the various functions of the deployment and the docking mechanisms are covered.
BDMADS, a BASIC Data Manipulation and Display System, is a collection of software programs that run on an Apple II Plus personal computer. BDMADS provides a user-friendly environment for the engineer in which to perform scientific data processing. The computer programs and their use are described. Jet engine performance calculations are used to illustrate the use of BDMADS. Source listings of the BDMADS programs are provided and should permit users to customize the programs for their particular applications.
Modern aerodynamic panel methods that handle large, complex geometries have made evident the need to interactively manipulate, modify, and view such configurations. With this purpose in mind, the GEOM program was developed. It is a menu driven, interactive program that uses the Tektronix PLOT 10 graphics software to display geometry configurations which are characterized by an abutting set of networks. These networks are composed of quadrilateral panels which are described by the coordinates of their corners. GEOM is divided into fourteen executive controlled functions. These functions are used to build configurations, scale and rotate networks, transpose networks defining M and N lines, graphically display selected networks, join and split networks, create wake networks, produce symmetric images of networks, repanel and rename networks, display configuration cross sections, and output network geometry in two formats. A data base management system is used to facilitate data transfers in this program. A sample session illustrating various capabilities of the code is included as a guide to program operation.
Long-range NASA planning includes construction and erection of large systems in space requiring automatic handling equipment, teleoperators, or robots under supervisory control. This paper investigates and explores some of the requirements for the control of teleoperated and autonomous space manipulators. The critical technology development areas are identified and discussed in the context of the developments at the Jet Propulsion Laboratory (JPL), and other places.
Display indicates pitch, yaw, and distance of remote manipulator with respect to object to be grasped. Displays numerical values and bargraph simulation of position and orientation of hand. When errors in position and orientation are small enough to ensure successful grasp, unit alerts operator with audible and visible signals.
An algorithm for the computer control of a seven degree of freedom manipulator arm, termed the Hawk Control Mode, is described. The algorithm is segmented into two distinct parts. One part controls the extension, azimuth, and elevation of the wrist joint. The second part controls the attitude of the terminal device. The two segments interact to achieve decoupling of wrist joint translation and terminal device rotation.
This paper describes the development of an analysis tool for the interactive design of control systems for manipulators and similar electro-mechanical systems amenable to representation as structures in a topological chain. The chain consists of a series of elastic bodies subject to small deformations and arbitrary displacements. The bodies are connected by hinges which permit kinematic constraints, control, or relative motion with six degrees of freedom. The equations of motion for the chain configuration are derived via Kane's method, extended for application to interconnected flexible bodies with time-varying boundary conditions. A corresponding set of modal coordinates has been selected. The motion equations are imbedded within a simulation that transforms the vector-dyadic equations into scalar form for numerical integration. The simulation also includes a linear, time-invariant controler specified in transfer function format and a set of sensors and actuators that interface between the structure and controller. The simulation is driven by an interactive set-up program resulting in an easy-to-use analysis tool.
It is pointed out that the Shuttle Remote Manipulator System (RMS) is a key element in the Space Transportation System's ability to deploy, retrieve, and handle payloads in space. In addition, the RMS has the capability of performing other critical tasks such as inspection, construction, and satellite servicing. The present investigation is concerned with various end of arm tool concepts which could augment the RMS's capability enabling it to perform functions such as pushing/holding (applying pressure), prying, clamping (nonimpulse release) and shearing. Attention is also given to a tool for satellite servicing, a method for augmenting the operator's 'feel' for the job by force/moment sensing, and a possible four phase program for implementation of the tool system. A description is given of the key elements of RMS flight testing carried out to date.
BDMADS, BASIC Data Manipulation and Display System, is software package that runs on Apple II Plus or lle personal computer to provide user-friendly environment in which to perform many complex operations on array of numbers.
PRECISION designed for manipulation of numbers with accurate retention of up to thousands of digits per number. Use of PRECISION prevents underflow and overflow in programs that generate extreme numbers such as probability theory, statistics, and scientific applications.
A conceptual design for a Mobile Remote Manipulator System (MRMS) is presented. This concept does not require continuous rails for mobility (only guide pins at truss hardpoints) and is very compact, being only one bay square. The MRMS proposed is highly maneuverable and is able to move in any direction along the orthogonal guide pin array under complete control at all times. The proposed concept would greatly enhance the safety and operational capabilities of astronauts performing EVA functions such as structural assembly, payload transport and attachment, space station maintenance, repair or modification, and future spacecraft construction or servicing. The MRMS drive system conceptual design presented is a reasonably simple mechanical device which can be designed to exhibit high reliability. Developmentally, all components of the proposed MRMS either exist or are considered to be completely state of the art designs requiring minimal development, features which should enhance reliability and minimize costs.
The linearity of the equations of motion of dynamical systems such as spacecraft or manipulators when controlled by acceleration commands is exploited in generating exact fast maneuvers. A simulated robot example thereof is examined, with advantages and limitations of the proposed design approach discussed in its context.
In connection with the current interest in agile spacecraft maneuvers, it has become necessary to consider the nonlinear coupling effects of multiaxial rotation in the treatment of command generation and tracking problems. Multiaxial maneuvers will be required in military missions involving a fast acquisition of moving targets in space. In addition, such maneuvers are also needed for the efficient operation of robot manipulators. Attention is given to details regarding the direct nonlinear command generation and tracking, an approach which has been successfully applied to the design of control systems for V/STOL aircraft, linearizing transformations for spacecraft controlled with external thrusters, the case of flexible spacecraft dynamics, examples from robot dynamics, and problems of implementation and testing.