SEARCH · Engineering Papers

Results for “polymeric membrane”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3

All sources NASA NTRS DOE OSTI

DOE OSTI2025

Overcoming the Conductance versus Crossover Trade-off in State-of-the-Art Proton Exchange Fuel-Cell Membranes by Incorporating Atomically Thin Chemical Vapor Deposition Graphene

Permeance–selectivity trade-offs are inherent to polymeric membranes. In fuel cells, thinner proton exchange membranes (PEMs) could enable higher proton conductance and increased power density with lower area-specific resistance (ASR), smaller ohmic losses, and lower ionomer cost. However, reducing thickness is accompanied by an increase in undesired species crossover harming performance and long-term efficiency. Here, we show that incorporating atomically thin monolayer graphene synthesized via scalable chemical vapor deposition (CVD) and tunable defect density into PEMs (Nafion, ~5–25 μm thick) can allow for reduced H 2 crossover (~34–78% of Nafion of a similar thickness) while maintaining adequate areal proton conductance for applications (>4 S cm –2 ). In contrast to most prior work using >50 μm symmetric Nafion sandwich structures, we elucidate the interplay of graphene defect density and Nafion proton transport resistance on the performance of Nafion|graphene composite membranes and find high-quality low-defect density CVD graphene (G) supported on Nafion 211 (~25 μm); i.e., N211|G has a high areal proton conductance (~6.1 S cm –2 ) and the lowest H 2 crossover (~0.7 mA cm –2 ). Fully functional centimeter-scale N211|G fuel-cell membranes demonstrate performance comparable to that of state-of-the-art Nafion N211 at room temperature as well as standard operating conditions (~80 °C, ~150–250 kPa-abs) with H 2 /air (power density ~0.57–0.63 W cm –2 ) and H 2 /O 2 feed (power density ~1.4–1.62 W cm –2 ) and markedly reduced H 2 crossover (~53–57%).

25 ENERGY STORAGE↗

DOE OSTI2021

Origins of Lithium/Sodium Reverse Permeability Selectivity in 12-Crown-4-Functionalized Polymer Membranes

Direct lithium extraction via membrane separations has been fundamentally limited by lack of monovalent ion selectivity exhibited by conventional polymeric membranes, particularly between sodium and lithium ions. Recently, a 12- Crown-4-functionalized polynorbornene membrane was shown to have the largest lithium/sodium permeability selectivity observed in a fully aqueous system to date. Using atomistic molecular dynamics simulations, we reveal that this selectivity is due to strong interactions between sodium ions and 12-Crown-4 moieties, which reduce sodium ion diffusivity while leaving lithium ion mobility relatively unaffected. Furthermore, the ion diffusivities in the membrane, when scaled by their respective solution diffusivities and free ion fractions, can be collapsed to an almost universal relationship depending on solvent volume fraction.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Solvent Transport in Disordered and Dynamic Membrane Pores: Implications for Reverse Osmosis and Nanofiltration Membranes

Pressure-driven separations with nanoporous membranes, such as reverse osmosis and nanofiltration, play a vital role in addressing water scarcity and enabling resource recovery. Understanding water or solvent transport in membrane pores is essential for advancing membrane separation technologies. A key question in transport modeling is to establish a relationship between solvent permeability and membrane porous structure properties, such as porosity or pore size. The nano- and subnanometer pores in polymeric membranes such as reverse osmosis and nanofiltration membranes are highly tortuous and dynamically connected, which challenges the conventional methods of transport modeling. This study addresses this challenge by developing a theoretical framework to describe solvent transport through membranes with dynamic and disordered porous structure. Specifically, we propose a lattice model to describe the pore network, while preserving the viscous nature of solvent permeation. We further establish a relationship between solvent permeability and membrane porosity or pore size, which is validated by molecular dynamics simulations and experimental data. By integrating this relationship into the solution-friction model, we define pore connectivity and local friction coefficient to quantify the impact of pore structure on solvent permeability. Our analysis highlights the dominant influence of pore connectivity on the permeability of reverse osmosis and nanofiltration membranes, particularly when the pore size approaches the dimensions of solvent molecules. Overall, this study provides critical insights into water and solvent transport mechanisms in nanoporous membranes, opening the door for strategies to substantially enhance membrane performance.

membranes↗

DOE OSTI2025

Pillared Laminar Vermiculite Membranes with Tunable Monovalent and Multivalent Ion Selectivity

Effective membrane separation of Li + from Na + and Mg 2+ is crucial for lithium extraction from water yet challenging for conventional polymeric membranes. Two dimensional (2D) membranes with ordered laminar structures and tunable physicochemical properties offer distinctive ion-sieving capabilities promising for lithium extraction. Recently, phyllosilicates are introduced as abundant and cost-effective source materials for such membranes. However, their water instability and low inherent ion transport selectivity hinder practical applications. Herein, a new class of laminar membranes with excellent stability and tunable ion sieving is reported by incorporating inorganic alumina pillars into vermiculite interlayers. Crosslinking vermiculite flakes with alumina pillars significantly strengthens interlamellar interactions, resulting in robust water stability. Doping of Na + before the pillaring process reverses the membrane's surface charge, substantially boosting Li + separation from multivalent cations via electrostatic interactions. Lithium extraction is often complicated by the presence of co-existing monovalent cations (e.g., Na + ) at higher concentrations. Here, by introducing excess Na + into the membrane after the pillaring process, the separation of Li + from monovalent cations is enhanced through steric effects. This work realizes both monovalent/multivalent and monovalent/monovalent selective ion sieving with the same membrane platform. A separation mechanism is proposed based on Donnan exclusion and size exclusion, providing new insights for membrane design for resource recovery applications.

2D materials↗

DOE OSTI2021

Benchmark CO 2 separation achieved by highly fluorinated nanoporous molecular sieve membranes from nonporous precursor via in situ cross-linking

Molecular sieve membranes with rigid micropores and CO 2 -philic functionalities within the architectures are promising candidates in CO 2 separation. However, the development of ctieve approaches for their fabrication still remains a significant challenge. In this study, an in situ cross-linking strategy is developed for the preparation of nanoporous fluorinated moleffecular sieve membranes using commercially available dense and non-porous polystyrene (M PS ) as a precursor template. Based on the dehydrative Friedel-Crafts reactions with highly fluorinated benzylic alcohols, M PS membranes are cross-linked in situ upon exposure to Brønsted acid (CF 3 SO 3 H), affording fluorinated microporous polymeric membranes with surface areas up to 523 m 2 g –1 and the presence of micropores centered at 1.1–1.3 nm as well as ultra-micropores (~0.6 nm). The obtained modified membranes exhibit good ideal CO 2 permeability of 797 barrer and CO 2 /N 2 selectivity of 28.5. In addition, high fluorine content (up to 28.5 wt%) and good thermal stability made the cross-linked membranes promising candidates to produce fluorinated carbon molecular sieve membranes with improved textural properties, exhibiting surface areas up to 1020 m 2 g –1 and ultra-micropores of ~0.4 nm. These membranes achieve superior CO 2 /N 2 separation performances exceeding the Robeson upper bound limit (2008).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Critical Component/Technology Gap in 21 st Century Power Plant Gasification Based Polygeneration: Advanced Ceramic Membranes/Modules for Ultra Efficient Hydrogen (H 2 ) Production/Carbon Dioxide (CO 2 ) Capture for Coal-Based Polygeneration

The 21 st Century Power Plant Gasification Based Polygeneration power plant layout is a relatively straightforward retrofit of well-established ammonia synthesis technology to the baseline IGCC process and envisions co-production of power and chemicals from coal in the context of carbon capture. A Dual Stage Membrane Process (DSMP) for pre-combustion CO 2 capture in a coal fired IGCC power plant has been demonstrated by Media and Process Technology Inc (MPT) (DE-FE0013064) in bench-scale live gas testing at the NCCC. This work, however, highlighted the importance of permeate purge capability to deliver deep H 2 recovery at moderate pressures and high carbon capture performance. Further, in the area of warm gas processing, a permeate purgeable membrane support for a wide range of inorganic high-performance membrane materials (CMS, Pd-alloy, zeolite, ZIF, graphene, etc.) was not available and hence had been a common and significant barrier to their commercialization. Hence, the Critical Technology Gap to implementing the DSMP in the Polygeneration power plant and more broadly in advanced warm gas separation applications was the inability to permeate purge the membranes coupled with the lack of the availability of a high packing density scalable package design. To overcome this Critical Technology Gap, in this project, the primary objective was the development of a permeate purgeable full ceramic support for these high-performance inorganic membranes and the complementary high packing density housing. Our goal and approach were to extend our “candle filter” design to a “dual end open” package to enable permeate purge and scalability. Microporous ceramic membranes have been proven to be a low cost, stable material for high temperature applications under harsh environment. They are the leading support choice of researchers in advanced inorganic membrane development in applications such as pre-combustion CO 2 capture. The new 2nd Generation “dual end open” bundle developed in this project is a universal support for these existing and emerging inorganic membrane technologies that up to now have lacked a pathway out of the laboratory. The full ceramic permeate purgeable support represents a transformational technology and opens the door to commercialization of these advanced membrane materials in a wide array of mega scale commercial applications in gas (and liquid) processing under aggressive conditions not suited to conventional polymeric membranes.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2024

Chelation-directed interface engineering of in-place self-cleaning membranes

Water–energy sustainability will depend upon the rapid development of advanced pressure-driven separation membranes. Although energy-efficient, water-treatment membranes are constrained by ubiquitous fouling, which may be alleviated by engineering self-cleaning membrane interfaces. In this study, a metal-polyphenol network was designed to direct the armorization of catalytic nanofilms (ca. 18 nm) on inert polymeric membranes. The chelation-directed mineralized coating exhibits high polarity, superhydrophilicity, and ultralow adhesion to crude oil, enabling cyclable crude oil-in-water emulsion separation. The in-place flux recovery rate exceeded 99.9%, alleviating the need for traditional ex situ cleaning. The chelation-directed nanoarmored membrane exhibited 48-fold and 6.8-fold figures of merit for in-place self-cleaning regeneration compared to the control membrane and simple hydraulic cleaning, respectively. Precursor interaction mechanisms were identified by density functional theory calculations. Here, chelation-directed armorization offers promise for sustainable applications in catalysis, biomedicine, environmental remediation, and beyond.

42 ENGINEERING↗

DOE OSTI2023

Data-driven predictions of complex organic mixture permeation in polymer membranes

Membrane-based organic solvent separations are rapidly emerging as a promising class of technologies for enhancing the energy efficiency of existing separation and purification systems. Polymeric membranes have shown promise in the fractionation or splitting of complex mixtures of organic molecules such as crude oil. Determining the separation performance of a polymer membrane when challenged with a complex mixture has thus far occurred in an ad hoc manner, and methods to predict the performance based on mixture composition and polymer chemistry are unavailable. Here, we combine physics-informed machine learning algorithms (ML) and mass transport simulations to create an integrated predictive model for the separation of complex mixtures containing up to 400 components via any arbitrary linear polymer membrane. We experimentally demonstrate the effectiveness of the model by predicting the separation of two crude oils within 6-7% of the measurements. Integration of ML predictors of diffusion and sorption properties of molecules with transport simulators enables for the rapid screening of polymer membranes prior to physical experimentation for the separation of complex liquid mixtures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Ultrathin polyorganosilica membranes synthesized by oxygen-plasma treatment of polysiloxanes for H 2 /CO 2 separation

Oxygen plasma treatment of polydimethylsiloxane (PDMS) induces an ultrathin polyorganosilica (POSi) layer (<10 nm) on top of a PDMS membrane, leading to excellent H 2 /gas separation properties and providing a rapid and scalable way to fabricate robust silica membranes compared with conventional high-temperature and time-consuming sol-gel methods. Here, we thoroughly investigate POSi membranes derived from poly (dimethylsiloxane-co-methylhydroxidesiloxane) (poly (DMS-co-MHOS)) containing -SiOH groups that can be more easily converted to silica networks than the -SiCH 3 in PDMS. Further, the effect of the polysiloxane structure and plasma treatment conditions (including plasma generating powers, oxygen flowrate, chamber pressure, and treatment time) on the silica chemistry, structure, and H 2 /CO 2 separation properties are systematically determined to derive structure/property relationships. An optimized membrane exhibits H 2 permeance of 880 GPU and H 2 /CO 2 selectivity of 67 at 150 °C, superior to state-of-the-art polymeric membranes. The membrane retains H 2 /CO 2 selectivity as high as 46 when challenged with simulated syngas containing 2.8 mol% water vapor at 150 °C, demonstrating the potential of these POSi membranes for practical applications.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Few-cycle atomic layer deposition to nanoengineer polybenzimidazole for H 2 /CO 2 separation

Atomic layer deposition (ALD) creates uniform sub-nanometer films on a variety of surfaces and nanopore walls and has been used to modify polymers to improve surface affinity towards specific molecules, solvent resistance, and barrier properties to gases and vapors. Here, for the first time, we demonstrate that few-cycle ALD can be used to engineer functional polymers at a sub-nanometer scale to improve both molecular size-sieving ability and counterintuitively, gas permeability. Particularly, 1-cycle ALD treatment of polybenzimidazole (PBI) by sequential exposure to trimethylaluminum (TMA) and water vapor remarkably increases H 2 permeability by 120% - 270% and H 2 /CO 2 selectivity by 30% at 35–200 °C. The ALD not only deposits an AlOx layer on the surface but also enables the TMA to infiltrate and react with the bulk PBI to form an AlO x network, disrupting polymer chain packing and increasing chain rigidity. The membrane exhibits excellent stability when challenged with simulated syngas, overcoming the permeability/selectivity tradeoff for H 2 /CO 2 separation. In conclusion, this study showcases a facile and scalable way of engineering polymeric membranes at a sub-nanometer level to improve molecular separation performance.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Polyphenol-Sensitized Atomic Layer Deposition for Membrane Interface Hydrophilization

Improvements in energy-water systems will necessitate fabrication of high-performance separation membranes. To this end, interface engineering is a powerful tool for tailoring properties, and atomic layer deposition (ALD) has recently emerged as a promising and versatile approach. However, most non-polar polymeric membranes are not amenable to ALD processing due to the absence of nucleation sites. Here, a sensitization strategy for ALD-coating is presented, illustrated by membrane interface hydrophilization. Facile dip-coating with polyphenols effectively sensitizes hydrophobic polymer membranes to TiO2 ALD coating. Tannic acid-sensitized ALD-coated membranes exhibit outstanding underwater crude oil repulsion and rigorous mechanical stability through bending and rinsing tests. As a result, these membranes demonstrate outstanding crude oil-in-water separation and reusability compared to untreated membranes or those treated with ALD without polyphenol pretreatment. A possible polyphenol-sensitized ALD mechanism is proposed involving initial island nucleation followed by film intergrowth. This polyphenol sensitization strategy enriches the functionalization toolbox in material science, interface engineering, and environmental science.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Understanding and Manipulating Counterion Condensation within Charged Polymer Electrolytes for Selective and Low Resistant Membrane Separations

Polymeric ion-exchange membranes are found at the heart of numerous electrochemical systems spanning separations (electrodialysis and membrane capacitive deionization) and energy conversion and storage (flow batteries, fuel cells, and electrolyzers). The ion-exchange membrane separators need to be ion conducting but electron insulating, and in many scenarios selective for a particular ion to conduct. Because of their polymeric nature, the molecular architectures of ion-exchange membranes lack the molecular precision found in many inorganic materials. Plus, they contain numerous structural defects that impede ionic transport. As a result of their poor structure, it has been difficult to carefully probe the underlying physics that governs ion transport in ion-exchange membranes. We investigated counterion condensation phenomena in ion-exchange membranes and correlated it to bulk ionic charge transport and selectivity in precisely defined and long-range ordered materials afforded through the principles of directed self-assembly. A multi-faceted approach spanning i.) advanced metrology, two-dimensional atomic force microscopy, x-ray scattering, and ion-exchange equilibria, and ii.) molecular simulations (classical molecular dynamics and ab-inito molecular dynamics) that bridge multiple time and length scales, were employed to correlate the extent of counterion condensation to ionic conductivity and selectivity. After uncovering the extent of the condensation phenomena in this project, new macromolecular chemistries were employed to manipulate the ion pairing interactions of the condensed counterions to tethered ions on the polymer backbone so more facile and selective conduction rates can be attained. The research has aided in the rational design of polymeric ion-exchange membrane separators with high current density for electrochemical systems and subsequently better energy efficiency.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Engineering In Situ Catalytic Cleaning Membrane Via Prebiotic-Chemistry-Inspired Mineralization

Pressure-driven membrane separation promises a sustainable energy-water nexus but is hindered by ubiquitous fouling. Natural systems evolved from prebiotic chemistry offer a glimpse of creative solutions. Herein, a prebiotic-chemistry-inspired aminomalononitrile (AMN)/Mn 2+ -mediated mineralization method is reported for universally engineering a superhydrophilic hierarchical MnO 2 nanocoating to endow hydrophobic polymeric membranes with exceptional catalytic cleaning ability. Green hydrogen peroxide catalytically triggered in-situ cleaning of the mineralized membrane and enabled operando flux recovery to reach 99.8%. The mineralized membrane exhibited a 9-fold higher recovery compared to the unmineralized membrane, which is attributed to active catalytic antifouling coupled with passive hydration antifouling. Electron density differences derived from the precursor interaction during mediated mineralization unveiled an electron-rich bell-like structure with an inner electron-deficient Mn core. This work paves the way to construct multifunctional engineered materials for energy-efficient water treatment as well as for diverse promising applications in catalysis, solar steam generation, biomedicine, and beyond.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Macrovoid-free high performance polybenzimidazole hollow fiber membranes for elevated temperature H 2 /CO 2 separations

Thermally robust membranes are required for H 2 production and carbon capture from hydrocarbon fuel derived synthesis (syn) gas. Polybenzimidaole (PBI) materials have exceptional thermal, chemical and mechanical characteristics and high H 2 perm-selectivity for efficient syngas separations at process relevant conditions. The large gas volumes processed mandate the use of a high-throughput, small footprint hollow fiber membrane (HFM) platform. Here in this work, an industrially attractive spinning protocol is developed to fabricate PBI HFMs with unprecedented H 2 /CO 2 separation performance. A unique dope composition incorporating an acetonitrile diluent is discovered enabling asymmetric macro-void free PBI HFM fabrication using a water coagulant. The influences of dope viscosity, coagulant chemistry, and air gap on HFM morphology are evaluated. Elevated temperature (up to 350 °C) H 2 permeances of 400 GPU with H 2 /CO 2 selectivities > 20 are achieved. This unprecedented separation performance is a ground breaking achievement at temperatures traditionally considered out-of-reach for polymeric membranes.

08 HYDROGEN↗

DOE OSTI2020

Pyrazine-Fused Porous Graphitic Framework-Based Mixed Matrix Membranes for Enhanced Gas Separations

Membrane-based separations can mitigate the capital- and energy-intensive challenges associated with traditional thermally driven processes. To further push the boundary of gas separations, mixed matrix membranes (MMMs) have been extensively exploited; however, identifying an optimal nanofiller to boost the separation performance of MMMs beyond Robeson permeability-selectivity upper bounds remains an ongoing challenge. In this study, a new class of MMMs based on pyrazine-fused crystalline porous graphitic frameworks (PGFs) is reported. At a loading of 6 wt % PGFs, the MMMs surpass the current H 2 /CH 4 Robeson upper bound, ideally suited for applications such as H 2 regeneration. In addition, the fabricated MMMs exhibit appealing CO 2 separation performance, closely approaching the current Robeson upper bounds for CO 2 separation. Compared with the pristine polymeric membranes, the PGF-based MMMs display a record-high enhancement of gas permeability over 120% while maintaining intrinsic gas selectivities. Highlighting the crucial role of the crystallinity of nanofillers, this study demonstrates a facile and effective approach in formulating high-performance MMMs, complementing state-of-the-art membrane formation processes. The design principles open the door to energy-efficient separations of gas mixtures with enhanced productivity compatible with the current membrane manufacturing.

36 MATERIALS SCIENCE↗

DOE OSTI2020

Facilitated Transport Membranes with Tunable Amine-CO 2 Chemistry for CO 2 /H 2 Separation

CO 2 -selective, amine-containing facilitated transport membranes are of great interest for syngas purification since high-pressure H 2 can be retained upon CO 2 removal. A variety of amine-containing polymers have shown decent chemical and thermal stability at aggressive conditions, but their CO 2 /H 2 separation properties are largely limited by the hydrostatic compaction and severe carrier saturation associated with the high syngas pressure. Herein, we report a new approach to enhance the CO 2 permeability by manipulating the steric hindrance of the amine carriers. A series of α-aminoacids with different alkyl or hydroxyethyl substituents are deprotonated by 2-(1-piperazinyl)ethylamine, leading to nonvolatile amine carriers with different degrees of steric hindrance. For hosting the low MW amine carriers, a highly crosslinked poly(vinyl acetal) is synthesized as a water-swellable polymer network. In order to avoid membrane compaction, perforated graphene oxide mono-sheets are dispersed as reinforcement fillers. In the presence of moisture, a bulkier alkyl substituent to the amino site (increasing steric hindrance) destabilizes the carbamate adduct and thus drastically increases the chemisorption of CO 2 , while the incorporation of ethylene oxide groups provides additional physisorption of CO 2 . The enhanced CO 2 solubility significantly mitigates the carrier saturation behavior, and an unprecedented CO 2 /H 2 selectivity greater than 100 is demonstrated at 107 °C and 12.5 atm of CO 2 partial pressure. As the CO 2 partial pressure reduces to 0.4 atm, a less hindered amine yields a higher reactive diffusivity of CO 2 , resulting in a CO 2 permeance of 435 GPU with a selectivity greater than 500. These reaction-mediated polymeric membranes are well above the theoretical upper bound, and they are of great interest for designing a highly-selective membrane process for syngas purification.

08 HYDROGEN↗

DOE OSTI2025

Characterizing Hydrated Polymers via Dielectric Relaxation Spectroscopy: Connecting Relative Permittivity, State of Water, and Salt Transport Properties of Sulfonated Polysulfones

Sulfonated polysulfone is a promising membrane material for separation and energy generation processes that rely on membranes to control the rates of small-molecule (e.g., water and ions) transport. The interactions among water molecules, ions, and the sulfonate groups in these polymers play a key role in controlling these rates of transport, but much remains unknown about these fundamental interactions in sulfonated polymers. In this study, we used dielectric relaxation spectroscopy to characterize water molecule dynamics in sulfonated polysulfone and Nafion. We found that the charged sulfonate groups contribute to a restriction of water molecule dynamics (i.e., a reduction in the characteristic time scale of dipolar motions) in a manner that is governed by the concentration and nature (i.e., conjugate base strength) of the sulfonate group. Additionally, we develop strategies to use these data to aid in modeling ion transport in sulfonated polysulfone. These results may be useful to guide engineering strategies for polymeric membranes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Growth-induced Donnan exclusion influences swelling kinetics in highly charged dynamic polymerization hydrogels

Polymeric gels crosslinked by DNA sequences can exploit DNA strand-displacement reactions to promote swelling through dynamic polymerization. The degree of swelling and the rate of swelling must be directly tunable to achieve the promise of programmable soft matter. Though the kinetics of the strand-displacement reaction provide insertion rates up to 10 4 /Molar/second as measured in bulk solution, DNA hydrogel swelling can take upwards of 30 h to complete. Computational modeling of the reaction-induced swelling of these gels with our recently-developed reactive electrochemomechanical theory (Zimmerman et al., 2024) suggests that their extraordinarily slow swelling is partly due to a scaling mismatch between the addition of charge and the addition of fluid volume, leading to a large transient increase in the fixed charge density. The significant increase in the gel’s fixed charge density, due to the binding of negatively charged DNA, sharply restricts the concentration of mobile hairpins through the phenomenon of Donnan charge exclusion, an effect commonly exploited in nanofiltration applications using polymeric membranes. The scaling problem is overcome when the mean additional swelling provided to the hydrogel by addition of a crosslink is above a critical value, thus the swelling outpaces the charge accumulation, leading the fixed charge density to drop and significantly accelerating the swelling process. This study shows that Donnan exclusion can explain the kinetics of DNA hydrogel swelling, and studies ways to modulate the reaction speed by either modifying the salt concentration or increasing or decreasing the number of base pairs in each DNA sequence.

42 ENGINEERING↗