SEARCH · Engineering Papers

Results for “ionics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2

All sources NASA NTRS DOE OSTI

NASA NTRS2020

Chemistry of Ionic Silver and Implications for Design of Potable Water Systems

Ionic silver (Ag+) at approximately 400 µg/L is proposed as an ingestible biocide for potable water systems in future human spacecraft. This paper investigates the underlying chemistry of the silver ion at potable concentrations and its interactions with other solutes and surfaces. This chemistry evaluation will elucidate ionic silver behavior in potable water systems and enable design optimization to minimize ionic silver depletion during long duration crewed and uncrewed segments of missions. Ionic silver can be lost from the water phase to the water-solid interface via adsorption as the cation and oxidation-reduction reactions with passivation defects. The adsorption and oxidation-reduction reactions of heritage piping materials used on spacecraft – stainless steel 316L, titanium, Inconel 718, and Teflon flex hoses – are considered. Conceptual models of adsorption isotherms and pH adsorption edges are applied to understand the role of pH and the surface-to-volume ratio of pipes and tanks on the partitioning of ionic silver between the aqueous and the solid phase during aging. The effect of repeated exposure-aging to an Ag+ containing solution of two passivated alloys (316L and Inconel 718) is evaluated to determine if an equilibrium concentration of ionic silver in the potable range is attainable for a given alloy and surface-to-volume ratio. Aging unpassivated and passivated 316L reduced the ionic silver depletion rate relative to first time exposures, but the same beneficial effect was not observed for Inconel 718.

Water↗

DOE OSTI2026

Electrostatic Gating of Ionic Conductance through Heterogeneous van der Waals Nanopores

Nanofluidic ionic transistors typically require gate voltages above 1 V and operate only at submillimolar ionic strengths, limiting their biocompatible applications. We demonstrate ionic transistors consisting of single sub-10 nm nanopores drilled in van der Waals (vdW) heterostructures with internal gate electrodes made of few-layer graphene. These devices deliver up to 10-fold current modulation at gate voltages as low as 0.3 V in 10 mM KCl, and ∼2-fold modulation at near-physiological 100 mM KCl. Baseline conductance with no gate shows surface-charge-dominated transport below 100 mM KCl, consistent with negatively charged hBN walls and ∼5 nm opening of the pores. The surface charge and the electrochemical asymmetry introduced by the three-electrode configuration govern the device’s behavior: negative gate voltage (V G ) enriches ionic concentrations and enhances current, whereas positive V G induces a local depletion zone that suppresses transport. The current modulation by V G is dependent on the polarity of the transmembrane potential and leads to ion current rectification. Molecular dynamics simulations of a nanopore in a hBN–graphene–hBN stack reveal confinement and surface charge-dependent suppression of the relative permittivity of interfacial water. Continuum modeling with radially varying interfacial water permittivity reproduces the asymmetric I–V characteristics and explains how the embedded gate sculpts local potential and ion concentrations. By enabling sub-0.5 V control of ionic transport at up to 100 mM salt concentrations, these devices address a key need in nanofluidics to create low-power ionic circuits and biosensing.

Materials science↗

DOE OSTI2025

Assessing the Effect of Explicit Polarizability on Models of Carbon Dioxide Solvation in Ionic Liquids

Ionic liquids are an important possible carbon capture material because of their anomalously high sorption selectivity for carbon dioxide over other gases common in air. Many research groups have investigated the molecular origins of this property and provided important insights, including using 1D and 2D-IR spectroscopy. Molecular dynamics simulations have been indispensable to the interpretation of these experiments. In prior molecular dynamics simulation work, charge-scaled force fields have typically been used to provide a mean-field treatment of effects vital to ionic liquid systems such as charge transfer and polarization. Here, we compare models of carbon dioxide solvated in ionic liquids with explicit polarization to models of the same with implicit polarizability through charge-scaling. We calculate structural, dynamical, and spectroscopic properties, and make comparisons to the same items measured in experiment. In this study, we focus on two ionic liquids: 1-butyl-3- methylimidazolium (BMIM + ) paired with bis(trifluoromethane sulfonyl imide) (Tf 2 N − ) and 1-butyl-3-methylimidazolium (BMIM+) paired with hexafluorophosphate (PF 6 − ). We find that many structural, dynamical, and spectroscopic properties are changed when polarization is modeled explicitly. We also find that explicit polarizability softens local ion cages around the carbon dioxide and that the long-time diffusion of the carbon dioxide is gated by the reorganization of the ionic liquid molecules. Comparisons to experiment show modest improvement of many observables compared with experiment for the explicitly polarizable model over the charge-scaled model. Overall, our results show that charge-scaled force fields are likely sufficient to compute spectroscopic properties of carbon dioxide in ionic liquids and suggest some interpretive rules for understanding their structural and dynamical properties. Those using charge-scaled force fields should generally assume that the ion cages around solutes such as carbon dioxide are too stiff and cation-rich in their models and adjust their interpretations and predictions accordingly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Ionic-content-driven restructuring of spirobisindane ionene networks: implications for mechanics, self-healing, and gas transport

Polymers of intrinsic microporosity (PIMs) offer exceptional gas permeability but remain brittle and susceptible to physical aging, limiting their durability in separation applications. Here, we introduce a reconfigurable microporous polymer network that uniquely integrates permanent PIM microporosity with autonomous, intrinsic self-healing driven by imidazolium-based ionic motifs. Spirobisindane units generate the intrinsic free-volume architecture, while an imidazolium-containing polyamide ionene supplies dynamic ionic and hydrogen-bonding interactions that reorganize under mild activation. Incorporation of imidazolium-based ionic liquids further tunes cohesion, mobility, and densification, enabling the network to relax, re-associate, and retain microporosity without structural collapse. Through a comprehensive multiscale approach combining spectroscopy, scattering, thermal and mechanical characterization with all-atom molecular dynamics and density functional theory calculations, we elucidate how ionic content, as a single control parameter that reshapes free-volume distributions, modulates local coordination environments, and governs relaxation and healing kinetics. At intermediate ionic loadings, the networks achieve rapid, repeatable self-healing while maintaining CO$_2$ selectivity, demonstrating an optimal balance between segmental mobility and structural integrity. By establishing how hierarchical ionic interactions couple structure, dynamics, and transport in microporous ionene networks, this work provides generalizable design rules for adaptive soft-matter systems that require simultaneous mechanical resilience, reconfigurability, and selective gas transport.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Transition from Vehicular to Structural Ionic Transport in Electrified Alkali Aqueous Solutions

A molecular understanding of the solvation and dynamics of ions under static electric fields is crucial for modelling a wide range of natural and technological processes. Yet, traditional simulation methods suffer from a trade-off that has to be made between accuracy and statistical convergence. To bridge this gap, herein we extend our recently introduced Perturbed Neural Network Potential Molecular Dynamics (PNNP MD) approach to investigate the solvation structures and ionic transport mechanisms of electrified alkali cationic solutions. We obtain ionic conductivities for Li+, Na+ and Cs+ from the field dependence of the ionic current density in good agreement with experiment. Surprisingly, the migration mechanism is found to be strikingly different for the three ions despite their similar ionic conductivities. While Li+ conducts predominantly through vehicular migration of a stable 4-fold coordinated ion at all field strengths, Cs+ conducts strictly through a structural diffusion mechanism, where 9-12 transient first shell water coordination bonds are broken and renewed. Notably, aqueous Na+ emerges as a “Goldilocks” ion: its ion-water interactions are strong enough to maintain distinct 5-6 fold coordination shells at zero field (unlike Cs+) yet labile enough to be strongly perturbed by electric fields (unlike Li+). As a consequence, we observe an electric field-induced transition from vehicular to structural ionic transport for Na+ that is accompanied by a marked increase in the ionic current density. Our results imply that the conductance mechanism of ions with moderate ion-solvent interactions can be effectively tuned by external electric fields.

Joll, Kit↗

NASA NTRS2014

Computational and Experimental Investigation of Li-doped Ionic Liquid Electrolytes: [pyr14][tfsi], [pyr13][fsi], and [EMIM][BF4]

We employ molecular dynamics (MD) simulation and experiment to investigate the structure, thermodynamics, and transport of N-methyl-N-butylpyrrolidinium bis(trifluoromethylsufonyl)imide ([pyr14][TFSI]), N -methyl-N-propylpyrrolidinium bis(fluorosufonyl)imide ([pyr13][FSI]), and 1-ethyl-3-methylimidazolium boron tetrafluoride ([EMIM][BF4]), as a function of Li-salt mole fraction (0.05 xLi+ 0.33) and temperature (298 K T 393 K). Structurally, Li+ is shown to be solvated by three anion neigh- bors in [pyr14][TFSI] and four anion neighbors in both [pyr13][FSI] and [EMIM][BF4], and at all levels of xLi+ we find the presence of lithium aggregates. Pulsed field gradient spin-echo NMR measurements of diffusion and electrochemical impedance spectroscopy measurements of ionic conductivity are made for the neat ionic liquids as well as 0.5 molal solutions of Li-salt in the ionic liquids. Bulk ionic liquid properties (density, diffusion, viscosity, and ionic conductivity) are obtained with MD and show excellent agreement with experiment. While the diffusion exhibits a systematic decrease with increasing xLi+, the contribution of Li+ to ionic conductivity increases until reach- ing a saturation doping level of xLi+ 0.10. Comparatively, the Li+ conductivity of [pyr14][TFSI] is an order of magnitude lower than that of the other liquids, which range between 0.1-0.3 mScm. Our transport results also demonstrate the necessity of long MD simulation runs ( 200 ns) required to converge transport properties at room T. The differences in Li+ transport are reflected in the residence times of Li+ with the anions (Li), which are revealed to be much larger for [pyr14][TFSI] (up to 100 ns at the highest doping levels) than in either [EMIM][BF4] or [pyr13][FSI]. Finally, to comment on the relative kinetics of Li+ transport in each liquid, we find that while the net motion of Li+ with its solvation shell (vehicular) significantly contributes to net diffusion in all liquids, the importance of transport through anion exchange (hopping) increases at high xLi+ and in liquids with large anions.

electrolytes↗

DOE OSTI2025

Stockmayer fluid simulations for viscosity and glass transition temperature of ionic liquids

We develop a Stockmayer fluid model for molecular dynamics simulations of ionic liquids that captures molecular polarization, ionic conductivity, viscosity, and glass transition temperature, using ethylammonium nitrate (EAN) as an example. The ions in EAN are treated as spheres interacting via the Lennard-Jones potential with an embedded point charge and a permanent dipole moment. We show that our simulation results for EAN are consistent with experimental data and then explore the effects of the molecular parameters on the viscosity of ionic liquids. Our results indicate that viscosity monotonically increases with ionic charge and dipole moment but non-monotonically changes with ionic diameter (or molar volume). This non-monotonic trend arises from the competition among the electrostatic interactions, molecular packing, and size asymmetry between the cation and anion. In conclusion, our model also shows that long-lived ion pairs result in higher viscosities.

Coarse-grained simulations↗

DOE OSTI2025

Local charge-screening and polarization switching in a ferroelectric ionic-superconductor

For ferroelectric ionic-conductors, polarization switching is complicated by the interplay between ion mobility and charge screening effects. When the ionic charge carriers also play a key role in the domain reversal, such as in Rb-doped KTiOPO 4 (RKTP), a higher level of complexity is introduced. RKTP provides an ideal platform for investigating the relationship between ionic conductivity and polarization reversal because its highly anisotropic crystal properties allow selective modification of material characteristics through diffusive cation doping. Here, we use indiffused Ba/K doping to create a significant increase in the ionic conductivity. Time-of-flight secondary ion mass spectrometry is employed to map Ba/K doping within the RKTP crystal and correlate it to changes in ionic mobility and polarization switching characteristics under an external field applied to the nonpolar face. Using band-excitation piezoresponse force microscopy, we demonstrate a selective switching-inhibition mechanism driven by the enhanced charge screening.

36 MATERIALS SCIENCE↗

NASA NTRSDate not supplied

Improvements in Ionic Liquid Technology for Carbon Dioxide Removal Applications

Carbon dioxide removal from cabin air continues to be of vital importance for future space missions. Current and proposed approaches have employed solid sorbents, hollow fiber membrane separators, and direct liquid sorbent contactors. Recent developments in ionic liquids have potential to improve performance in all three of these technologies. Efficient encapsulation of ionic liquids by polymeric shell can enable their use in a solid sorbent-like configuration without significant integration intervention to the current space technology. Poly(ionic liquid)-ionic liquid membranes have the potential to cross over the Robeson selectivity-permeability upper bound, and thereby outperform traditional membranes used in hollow fibers. Advances in ionic liquid chemistry enables performance improvements in liquid sorbent contactors owing to the tunable gravimetric CO2 capacity, reaction enthalpy and liquid viscosity. This paper will describe recent work in each of these areas.

Ionic Liquid,Carbon Dioxide,Air Revitalization↗

NASA NTRSDate not supplied

Using Holey Graphene for Improved Interfacial Contact in Solid Electrolyte Ionic Conductivity Measurements

Solid-state batteries (SSBs) are poised to become the batteries of the future with advantages such as higher energy density, lighter weight, versatile geometry, and greater safety due to low flammability risk. An important parameter of the solid electrolyte (SE) used is its ionic conductivity. The ionic conductivity is generally calculated from the bulk resistance of a SE pellet, measured from the electrochemical impedance spectroscopy data. The SE pellet is typically prepared from the electrolyte powder by dry compression and is sandwiched between two blocking current collectors to obtain the impedance spectroscopy data. One of the challenges in conducting this measurement is poor interfacial contacts between the SE pellet and the current collector surfaces. Therefore, measurements reported in the literature may underestimate the true ionic conductivity of a given electrolyte. Holey graphene is a carbon nanomaterial with high electrical conductivity and unique dry compressibility, which is unusual for carbon materials but similar to many oxide and sulfide SEs. In this work, it is demonstrated that adding a thin layer of holey graphene between the electrolyte and the stainless steel current collectors significantly improves the interfacial contact. The ionic conductivity values obtained in the effort were sometimes several times higher than the data measured for SEs without the holey graphene layers. This work calls for more standardized measurement procedures to reduce the discrepancies in reported ionic conductivity values.

Solid state battery↗

DOE OSTI2026

Hydrogen defects in LaBi 2 O 4 X (X = Cl, Br, and I) Sillén oxyhalide phases and their impacts on ionic transport

Sillén oxyhalides have recently emerged as promising materials for both photocatalytic and ionic transport applications, yet the role of likely-ubiquitous hydrogen-related defects in these layered compounds remains largely unexplored. Here, we employ first-principles defect calculations to investigate incorporation energetics for hydrogen- and oxygen-related defects, as well as their migration barriers in LaBi 2 O 4 X (X = Cl, Br, I) phases. We find that hydrogen interstitials, particularly protonic species (H i + ), are readily accommodated within the open Bi–O layers. Protons compete with oxygen vacancy donors (V O 2+ ) and charge-compensate with oxygen interstitial acceptors (O i 2− ). By linking hydrogen defect formation to water- and oxygen-related redox equilibria, we reveal that V O 2+ facilitates H i + incorporation, while O i 2− promotes interstitial hydroxide formation, establishing a direct connection between proton and oxide-ion transport. Calculated migration barriers indicate that ionic diffusion is confined to Bi–O layers with low barriers of 0.20–0.25 eV for H i + and 0.14–0.25 eV for V O 2+ , suggesting that the materials contain intrinsic pathways for mixed ionic conduction. These results provide a microscopic picture of hydrogen behavior in Sillén oxyhalides and point to design strategies for integrating protonic and oxide-ion transport in layered oxyhalide electrolytes. Band-edge alignment analysis shows that LaBi 2 O 4 I provides the optimal combination of hydrogen solubility, oxygen defect stability, and mixed ionic conductivity, highlighting its potential for low-temperature electrochemical and energy-conversion applications. Overall, this work establishes the defect-driven origin of hydrogen transport in Sillén oxyhalides and expands their applicability beyond photocatalysis to mixed ionic conduction and hydrogen electrochemistry.

Energy - Conversion↗

DOE OSTI2025

Ferro-ionic states and domains morphology in Hf x Zr 1–x O 2 nanoparticles

Unique polar properties of nanoscale hafnia-zirconia oxides (Hf x Zr 1–x O 2 ) are of great interest for condensed matter physics, nanophysics, and advanced applications. These properties are connected (at least partially) to the ionic–electronic and electrochemical phenomena at the surface, interfaces, and/or internal grain boundaries. Here, we calculated the phase diagrams, dielectric permittivity, spontaneous polar, and antipolar ordering, as well as the domain structure morphology in Hf x Zr 1–x O 2 nanoparticles covered by ionic–electronic charge originating from surface electrochemical adsorption. We revealed that the ferro-ionic coupling supports the polar long-range order in nanoscale Hf x Zr 1–x O 2 , induces, and/or enlarges the stability region of the labyrinthine domains toward smaller sizes and smaller environmental dielectric constant at low concentrations of the surface ions. The ferro-ionic coupling causes the transition to the single-domain ferro-ionic state at high concentrations of the surface ions. We predict that the labyrinthine domain states, being multiple-degenerated, may significantly affect the emergence of the negative differential capacitance state in the nanograined/nanocrystalline Hf x Zr 1–x O 2 films.

36 MATERIALS SCIENCE↗

NASA NTRS2009

Water Contaminant Mitigation in Ionic Liquid Propellant

Appropriate system and operational requirements are needed in order to ensure mission success without unnecessary cost. Purity requirements applied to thruster propellants may flow down to materials and operations as well as the propellant preparation itself. Colloid electrospray thrusters function by applying a large potential to a room temperature liquid propellant (such as an ionic liquid), inducing formation of a Taylor cone. Ions and droplets are ejected from the Taylor cone and accelerated through a strong electric field. Electrospray thrusters are highly efficient, precise, scaleable, and demonstrate low thrust noise. Ionic liquid propellants have excellent properties for use as electrospray propellants, but can be hampered by impurities, owing to their solvent capabilities. Of foremost concern is the water content, which can result from exposure to atmosphere. Even hydrophobic ionic liquids have been shown to absorb water from the air. In order to mitigate the risks of bubble formation in feed systems caused by water content of the ionic liquid propellant, physical properties of the ionic liquid EMI-Im are analyzed. The effects of surface tension, material wetting, physisorption, and geometric details of the flow manifold and electrospray emitters are explored. Results are compared to laboratory test data.

Conroy, David↗

NASA NTRS2016

Fast Ignition and Sustained Combustion of Ionic Liquids

A catalyst free method of igniting an ionic liquid is provided. The method can include mixing a liquid hypergol with a HAN (Hydroxylammonium nitrate)-based ionic liquid to ignite the HAN-based ionic liquid in the absence of a catalyst. The HAN-based ionic liquid and the liquid hypergol can be injected into a combustion chamber. The HAN-based ionic liquid and the liquid hypergol can impinge upon a stagnation plate positioned at top portion of the combustion chamber.

Joshi, Prakash B.↗

NASA NTRS2017

Ionic Polyimides: New High Performance Polymers for Additive Manufacturing

There is currently a very limited set of engineering polymers that have been demonstrated as viable for use in 3-D printing. Additive manufacturing of custom components will require a much larger array of polymers, especially those with physical, thermal, chemical, and mechanical properties that can be tailor-made. The development of ‘Ionic Polyimides’ offers a solution to this shortage by combining the well understood and widely accepted properties of conventional polyimides, with a new approach to polymer synthesis. Polyimides and polymeric ionic liquids (poly(ILs)) are at the forefront of advanced polymer materials, each with their own set of advantages and disadvantages. While it is clear that more types of polymer materials are needed for fused deposition modeling (FDM) additive manufacturing, there is a need to explore these classes of materials. The synthesis process developed by the Bara Research Group at the University of Alabama allows full control over polymer structure, nanostructure, thermal, electrical, and physical properties making them a prime candidate for use in the additive manufacturing process. Furthermore, the new process allows us to tailor-make a high strength polymer that can be used to fabricate filament feedstock instead of pellets for 3D printing. The primary objective of this proposal is to determine the relationship between molecular structure, physical properties, and performance of ionic polyimides. Further, we seek to determine their utility as materials suitable for additive manufacturing of components used in aerospace vehicles, with an emphasis on characterizing and simulating their thermal behaviors and properties. This proposal addresses the need for fundamental research on a customizable polymer filament feedstock for 3-D printing with tailor-made properties potentially making it superior to the commercial blends offered in industry today. The deliverables for this project are the creation of a database that will detail the relationships between the molecular structure and physical properties for the ionic polyimide of interest (e.g. Tg/Tm (Glass Transition Temperature divided by Melting Point)) relative to different ionic polyimide structures). This new database will provide a “road map” to the development of the first generation of materials and ultimately proof-of-concept.

Jackson, Enrique↗

DOE OSTI2025

Mechanisms and stability of Li dynamics in amorphous Li-Ti-P-S-based mixed ionic–electronic conductors: A machine learning molecular dynamics study

Mixed ionic–electronic conductors (MIECs) exhibit both high ionic and electronic conductivity to improve the battery performance. In this work, we investigate the mechanism and stability of transport channels in our recently developed MIEC material, amorphous Ti-doped lithium phosphorus sulfide (LPS), using molecular dynamics (MD) simulations with a 99% accurate machine-learning force field (MLFF) trained on ab initio MD data. The achieved MLFF helps efficient large-scale MD simulations on LPS with three Ti concentrations (10%, 20%, and 30%) and six temperatures (25°C to 225°C) to calculate ionic conductivity, activation energy, Li-ion transport mechanism, and configurational entropy. Results show that ionic conductivities and activation energies are consistent with our recent experimental values. Moreover, Li-ion transport occurs via free-volume diffusion facilitated by the formation of disordered Li-S polyhedra. The enhanced stability of transport channels at 10% and 20% Ti doping, compared to 0% and 30%, is observed by analyzing the vibrational and configurational entropy of these disordered Li-S polyhedra. Overall, this study highlights the utility of MLFF-based large-scale MD simulations in explaining the transport mechanism and the stability of Li-ion in Ti-doped LPS electrolyte with significant computational efficiency.

And configuration entropy↗

NASA NTRS2026

Highly Porous Polyimide Gel for Use as Battery Separator with Room Temperature Ionic Liquid Electrolytes

Advanced aerospace vehicular concepts require advances in many existing technologies, including space power and energy storage systems. Batteries represent one of the major areas in need of improvement, both in terms of energy density and safety, with growing concerns over the fire safety of commercial lithium-ion batteries. This has prompted efforts to develop nonflammable battery components, namely the electrolyte and separator. Existing commercial lithium-ion batteries utilize polyolefin microporous membranes as separators with an electrolyte consisting of a lithium salt dissolved in a mixture of cyclic carbonate solvents. This separator/electrolyte combination has ionic conductivities in the range of 10 −2 to 10 −3 S/cm. However, the cyclic carbonate solvents are inherently flammable. Room-temperature ionic liquids (RTILs) appear to be a safer alternative. They offer good ionic conductivities and are inherently nonvolatile and nonflammable, giving them a safety advantage. However, many promising RTILs for battery electrolytes are not compatible with commercial polyolefin separator materials. Alternative separator materials, such as polyimides, are non-flammable and are capable of accepting RTILs into their structure. Polyimide gels, with a composition of 4,4′-oxydianiline, 3,3′,4,4′-tetracarboxylic dianhydride and cross-linked with Desmodur N3300A, possess an open-porous, fibrillar network architecture which offers a high degree of porosity (typically greater than 85% porosity) for lithium-ion transport and conduction, as well as good mechanical properties. Furthermore, these polyimide gels are compatible with selected imidazolium-based RTILs. Nonflammable separator/electrolyte systems with room-temperature conductivities in the range of 10 −3 S/cm have been evaluated. It has been demonstrated that 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide was the most promising among six RTILs screened, in terms of both ionic conductivity and constant current cycling.

Polyimide↗

DOE OSTI2026

Aqueous ionic liquid–mediated depolymerization of textile waste

Textile waste, dominated by polyester-cotton blends, largely evades recycling and ends up in landfills or incinerators. Here, we demonstrate an aqueous ionic liquid–mediated route for selective depolymerization of textile waste, including polyester and polycotton (polyester/cotton blend). Using aqueous cholinium lysinate ([Ch][Lys]), we depolymerized poly(ethylene terephthalate) (PET) textiles with over 95 % terephthalic acid (TPA) yields, comparable to virgin PET resin. Notably, colored fabrics showed no inhibitory effect from dyes. While protic ionic liquids such as ethanolammonium acetate showed limited efficiency, their precursor amine enabled near-complete PET conversion—ethanolamine promoted aminolysis with byproduct formation whereas butylamine achieved higher TPA recovery through combined hydrolysis and aminolysis. Importantly, polycotton blends achieved complete PET depolymerization with TPA yield above 85 % and preserved cotton. These results establish aqueous ionic liquids as efficient, selective agents for deconstructing polyester in blended textiles, offering flexible product and ionic liquid management pathways toward scalable and facile textile recycling.

Amines↗