Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “aluminum nitride”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Enhanced Laser Damage Threshold in Optically Addressable Light Valves via Aluminum Nitride Photoconductors

Abstract Optically addressable light valves (OALVs) are specialized optical components utilized for spatial beam shaping in various laser‐based applications, including optics damage mitigation, and enhanced functionality in diode‐based additive manufacturing requiring high intensities. Current state‐of‐the‐art OALVs employ photoconductors such as Bismuth Silicon Oxide (BSO) or Bismuth Germanium Oxide (BGO), which suffer from limited laser‐induced damage thresholds (LiDT) and inadequate thermal conductivities, thus restricting their use in high peak and average power applications. Aluminum nitride (AlN), an emerging ultra‐wide band gap (UWBG) III–V semiconductor, offers promising optoelectronic properties and superior thermal conductivity (>300 Wm −1 K −1 at 298° K, compared to BSO's 3.29 Wm −1 K −1 ). In this study, the first AlN‐based OALVs are designed, fabricated, and experimentally demonstrated using commercially available single‐crystal AlN substrates. These AlN‐based OALVs have shown clear superiority over BSO and BGO‐based devices. Design considerations for OALVs incorporating UWBG photoconductors are discussed, and the photoresponsivity from defect‐mediated sub‐bandgap absorption in AlN crystals is verified as sufficient for OALVs operating under high light fluences. The optimum driving voltage for the AlN‐based OALV is determined to be ≈ 45 V pp at 100 Hz, achieving a transmittance of 91.3%, an extinction ratio (ER) of more than 100, and a 51:1 image contrast.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Atomic layer deposited aluminum nitride for interface protection of lithium germanium thiophosphate solid electrolytes

Lithium germanium thiophosphate (LGPS) is an attractive solid-state electrolyte material due to its exceptionally high ionic conductivity (~1.2 × 10 –2 S cm –1 ), comparable to many organic liquid electrolytes commonly used in batteries. Despite the high conductivity of LGPS, the susceptibility of LGPS to deleterious degradation reactions has impeded its commercial adoption into solid-state batteries. In particular, the poor voltage stability of LGPS with high-voltage cathode or lithium metal potentials often results in dramatically increasing cell impedance during galvanic cycling. Here, we use aluminum nitride (AlN) as a protection layer for Li metal anode, applied directly to the LGPS at 250 °C using plasma-enhanced atomic layer deposition, to enhance cell performance by preventing LGPS-Li metal reactions. We compare the surface chemistry and electrochemical cycling performance of atomic layer-deposited AlN grown using both plasma N 2 and NH 3 precursors. Galvanostatic cycling and electrochemical impedance spectroscopy show that AlN-coated LGPS cells perform better than bare LGPS cells in contact with Li metal anodes, with the AlN able to improve cycling longevity by over a factor of 3 in certain cases. Finally, we utilize x-ray photoelectron spectroscopy (XPS) line scans to highlight the slow room-temperature reactivity between AlN and evaporated lithium metal, and a computational model is built to aid further XPS analysis.

25 ENERGY STORAGE↗
DOE OSTI2023

Vertical Etching of Scandium Aluminum Nitride Thin Films Using TMAH Solution

A wide bandgap, an enhanced piezoelectric coefficient, and low dielectric permittivity are some of the outstanding properties that have made Sc x Al 1-x N a promising material in numerous MEMS and optoelectronics applications. One of the substantial challenges of fabricating Sc x Al 1-x N devices is its difficulty in etching, specifically with higher scandium concentration. In this work, we have developed an experimental approach with high temperature annealing followed by a wet etching process using tetramethyl ammonium hydroxide (TMAH), which maintains etching uniformity across various Sc compositions. The experimental results of etching approximately 730 nm of Sc x Al 1-x N (x = 0.125, 0.20, 0.40) thin films show that the etch rate decreases with increasing scandium content. Nevertheless, sidewall verticality of 85°~90° (±0.2°) was maintained for all Sc compositions. Based on these experimental outcomes, it is anticipated that this etching procedure will be advantageous in the fabrication of acoustic, photonic, and piezoelectric devices.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Revealing the Defect‐Driven Ferroelectric Mechanisms of Aluminum Nitride

Wurtzite III-nitride compounds are CMOS-compatible with widespread industrial interest to exercise ferroelectricity, despite their polar structure being highly resistant to polarization reversal. Here, we induce and tune ferroelectric properties in w-AlN via direct-write ion-beam processing, using nanoscale patterned defect engineering as a post-growth alternative to conventional cation substitution. Nanometric piezoresponse spectroscopy of the focused He + beam patterned defect concentrations in ferroelectric Al 0.92 B 0.08 N measures a localized 10x enhancement in effective piezoresponse and 40% reduction in switching barrier. The irradiation-induced point defects convert piezoelectric AlN into a ferroelectric system with site-saturated nucleation and raise the dielectric susceptibility, switched polarization, and effective piezoelectric coefficient. Enhanced defect-lattice interactions in AlN increase carrier conduction and phonon scattering loss but preserve long-range crystallinity. Here, based on atomistic analysis of nudged elastic band density functional theory calculations and reactive force field simulations, both nitrogen vacancies and defect complexes disrupt bond ordering, facilitating a line-by-line low-barrier switching of pristine AlN.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Ferroelectricity in boron-substituted aluminum nitride thin films

This manuscript demonstrates ferroelectricity in B-substituted AlN thin films and a complementary set of first-principles calculations to understand their structure-property relationships. Al 1–x B x N films are grown by dual-cathode reactive magnetron sputtering on (110)W/(001)Al 2 O 3 substrates at 300°C at compositions spanning x = 0 to x = 0.20. X-ray diffraction studies indicate a decrease in both the c and a lattice parameters with increasing B concentration, resulting in a decrease in unit cell volume and a constant c/a axial ratio of 1.60 over this composition range. Films with 0.02 ≤ x ≤ 0.15 display ferroelectric switching with remanent polarizations exceeding 125 μCcm –2 while maintaining band gap energies of > 5.2eV. The large band gap allows low frequency hysteresis measurement (200 Hz) with modest leakage contributions. At B concentrations of x > 0.15, c-axis orientation deteriorates and ferroelectric behavior is degraded. Furthermore, density-functional theory calculations corroborate the structural observations and provide predictions for the wurtzite u parameter, polarization reversal magnitudes, and composition-dependent coercive fields.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Enhancement of second-order optical nonlinearities and nanoscale periodic domain patterning in ferroelectric boron-substituted aluminum nitride thin films

The discovery and development of CMOS-compatible, nonlinear optical materials is essential to produce integrated photonic devices with advanced functionalities. AlN is a strong candidate for on-chip device demonstration due to its intrinsic second-order optical nonlinearities, large bandgap, and well-established fabrication techniques. However, AlN is not easily phase matched for the largest coefficient d 33 ; the coefficients that could potentially be dispersion phase-matched, d 31 and d 15 , have weak nonlinearities. This work investigates ferroelectric Al 1-x B x N (x = 0 to 0.11) for viability as a large bandgap nonlinear optical material with unique suitability towards ultraviolet light generation using second harmonic generation. The linear and nonlinear optical properties are characterized accounting for material anisotropy. With increasing B concentration, a large enhancement from near negligible values to d 31 = 0.9 ± 0.1 pm/V and d 15 = 1.2 ± 0.1 pm/V is observed. This compares favorably to other large bandgap materials like β-Ba(BO 2 ) 2 , where the largest nonlinear coefficient is d 22 ~ 2.3 pm/V at 800 nm. This is accompanied by a change in the bandgap from 6.1 eV to 5.8 eV as B substitution goes from 0 to 11%. A periodically poled, quasi-phase-matched ferroelectric domain pattern with 400 nm domain size and a wall roughness of <16 nm is demonstrated.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Silicon nitride-aluminum oxide solid solution (SiAION) formation and densification by pressure sintering

Stirred-ball-mill-blended Si3N4 and Al2O3 powders were pressure sintered in order to investigate the mechanism of solid solution formation and densification in the Si3N4-Al2O3 system. Powder blends with Si3N4:Al2O3 mole ratios of 4:1, 3:2, and 2:3 were pressure sintered at 27.6-MN/sq m pressure at temperatures to 17000 C (3090 F). The compaction behavior of the powder blends during pressure sintering was determined by observing the density of the powder compact as a function of temperature and time starting from room temperature. This information, combined with the results of X-ray diffraction and metallographic analyses regarding solutioning and phase transformation phenomena in the Si3N4-Al2O3 system, was used to describe the densification behavior.

Yeh, H. C.↗
NASA NTRS2006

Coating MCPs with AlN and GaN

A development effort underway at the time of reporting the information for this article is devoted to increasing the sensitivity of microchannel plates (MCPs) as detectors of photons and ions by coating the MCPs with nitrides of elements in period III of the periodic table. Conventional MCPs are relatively insensitive to slowly moving, large-mass ions for example, ions of biomolecules under analysis in mass spectrometers. The idea underlying this development is to coat an MCP to reduce its work function (decrease its electron affinity) in order to increase both (1) the emission of electrons in response to impingement of low-energy, large-mass ions and (2) the multiplying effect of secondary electron emission. Of particular interest as coating materials having appropriately low or even negative electron affinities are gallium nitride, aluminum nitride, and ternary alloys of general composition Al(x)Ga(1-x)N (where 0<x<1). These materials exhibit attractively high degrees of chemical, mechanical, and thermal stability plus acceptably high resistance to sputtering. The electron-excitation cross sections of these materials are expected to exceed those of several other materials (including diamond) that are, variously, in use or under development for the same purpose. Moreover, by doping these materials with silicon, one can render them partly electrically conductive, thereby suppressing the undesired accumulation of electric charge that could otherwise occur during bombardment by ions. For experiments, thin films of AlN and GaN both undoped and doped with Si were deposited on commercial MCPs by radio-frequency molecular-beam epitaxy (also known as plasma-assisted molecular-beam epitaxy) at temperatures <200 C. This deposition technique is particularly suitable because (1) MCPs cannot withstand the higher deposition-substrate temperatures used to decompose constituent compounds in some other deposition techniques and (2) in this technique, the constituent Al, Ga, and N are supplied in elemental form, so that there is no need for thermal decomposition at the substrate surface. The nitride films thus formed were, variously, amorphous or polycrystalline. The nitride films were coated with surface layers of gold <100 thick. The MCPs were tested in a standard configuration in which the output stage of a first MCP was coupled to the input stage of a second MCP. Each pair of MCPs was mounted in a standard holder that included front and back contact rings and an anode for collecting the output electrons of the second MCP. The MCP pairs were biased at potentials between 1.7 and 1.9 kV, and count rates measured after preamplification and discrimination. To enable a direct comparison, in one pair, the second MCP was uncoated while the first MCP was coated over half its surface. The coated and uncoated sides of the half-coated MCP were exposed to fluxes of argon ions at kinetic energies of 1.0 and 0.5 keV. At 1.0 keV, the count rate for the coated side was about 2.3 times greater than that for the uncoated side; at 0.5 keV, the count rate for the coated side was about 1.8 times greater than that for the uncoated side.

Bensaoula, Abdelhakim↗
NASA NTRS1999

Cryogenic High Pressure Sensor Module

A pressure sensor is provided for cryogenic, high pressure applications. A highly doped silicon piezoresistive pressure sensor is bonded to a silicon substrate in an absolute pressure sensing configuration. The absolute pressure sensor is bonded to an aluminum nitride substrate. Aluminum nitride has appropriate coefficient of thermal expansion for use with highly doped silicon at cryogenic temperatures. A group of sensors, either two sensors on two substrates or four sensors on a single substrate are packaged in a pressure vessel.

Chapman, John J.↗
NASA NTRS2001

Cryogenic, Absolute, High Pressure Sensor

A pressure sensor is provided for cryogenic, high pressure applications. A highly doped silicon piezoresistive pressure sensor is bonded to a silicon substrate in an absolute pressure sensing configuration. The absolute pressure sensor is bonded to an aluminum nitride substrate. Aluminum nitride has appropriate coefficient of thermal expansion for use with highly doped silicon at cryogenic temperatures. A group of sensors, either two sensors on two substrates or four sensors on a single substrate are packaged in a pressure vessel.

John J Chapman↗
NASA NTRS1994

Transmission Lines for High Frequency and High Density Packaging

We report on resistivity and chemical stability of Cr/Au bilayers deposited by sputtering on three kinds of substrates: alumina, aluminum nitride and aluminum nitride coated alumina. The insertion loss of Cr/Au microstrip lines fabricated on these three substrates was low and stable after 100 cycles in the -65 degree C to 125 degree C temperature range.

high-frequency↗
DOE OSTI2022

Development of Aluminum Scandium Nitride Molecular Dynamics Force Fields with Scalable Multi-Objective Bayesian Optimization

Scandium (Sc)-doped aluminum nitride (AlN) exhibits improved piezoelectric properties, which is favorable for sensor applications. Although many experimental studies exist to fine tune the material properties for design purposes, an atomistic level understanding of the structure-property (S-P) relationships is needed, which is the aim of this work. Molecular dynamics can be used to understand the S-P relationships. However, the limited availability of suitable force fields has been a major challenge for accurate property predictions. In this article, a robust force field calibration method using a scalable multi-objective Bayesian optimization approach is presented. Optimizations with three, six, and eight objectives are applied to calibrate aluminum scandium nitride force fields based on the piezoelectric characteristics, modulus of elasticity, and lattice parameters at different Sc-doped levels. Furthermore, the performances of the different force fields are compared, and the performance of the higher dimensional objective problems is discussed. The highly scalable molecular dynamics force field development method is successfully implemented, resulting in the creation of several aluminum scandium nitride molecular dynamics force fields for piezoelectric applications at varying Sc dope levels.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Aluminum scandium nitride films for piezoelectric transduction into silicon at gigahertz frequencies

Recent advances in the growth of aluminum scandium nitride films on silicon suggest that this material platform could be applied for quantum electromechanical applications. Here, we model, fabricate, and characterize microwave frequency silicon phononic delay lines with transducers formed in an adjacent aluminum scandium nitride layer to evaluate aluminum scandium nitride films, at 32% scandium, on silicon interdigital transducers for piezoelectric transduction into suspended silicon membranes. We achieve an electromechanical coupling coefficient of 2.7% for the extensional symmetric-like Lamb mode supported in the suspended material stack and show how this coupling coefficient could be increased to at least 8.5%, which would further boost transduction efficiency and reduce the device footprint. The one-sided transduction efficiency, which quantifies the efficiency at which the source of microwave photons is converted to microwave phonons in the silicon membrane, is 10% at 5 GHz at room temperature and, as we discuss, there is a path to increase this toward near-unity efficiency based on a combination of modified device design and operation at cryogenic temperatures.

36 MATERIALS SCIENCE↗