Engineering Papers⌕ Search

Engineering topics

Zhang, Yan

Publications and source records attributed to Zhang, Yan.

At least 127 records · Page 7

Photoelectrochemical Carbon Dioxide Reduction Using a Nanoporous Ag Cathode

Solar fuel production from abundant sources using photoelectrochemical (PEC) systems is an attractive approach to address the challenges associated with the intermittence of solar energy. In comparison to electrochemical systems, PEC cells directly utilize solar energy as the energy input, and if necessary, then an additional external bias can be applied to drive the desired reaction. In this work, a PEC cell composing of a Ni-coated Si photoanode and a nanoporous Ag cathode was developed for CO 2 conversion to CO. We report the thin Ni layer not only protected the Si wafer from photocorrosion but also served as the oxygen evolution catalyst. At an external bias of 2.0 V, the PEC cell delivered a current density of 10 mA cm –2 with a CO Faradaic efficiency of ~70%. More importantly, a stable performance up to 3 h was achieved under photoelectrolysis conditions, which is among the best literature-reported performances for PEC CO 2 reduction cells. The photovoltage of the PEC cell was estimated to be ~0.4 V, which corresponded to a 17% energy saving by solar energy utilization. Postreaction structural analysis showed the corrosion of the Ni layer at the Si photoanode/catalyst interface, which caused performance degradation under prolonged operations. A stable oxygen evolution catalyst with a robust interface is crucial to the long-term stability of PEC CO 2 reduction cells.

25 ENERGY STORAGE↗

Mesocarbon Microbead Carbon-Supported Magnesium Hydroxide Nanoparticles: Turning Spent Li-ion Battery Anode into a Highly Efficient Phosphate Adsorbent for Wastewater Treatment

Phosphorus in water eutrophication has become a serious problem threatening the environment. However, the development of efficient adsorbents for phosphate removal from water is lagging. In this work, we recovered the waste material, graphitized carbon, from spent lithium ion batteries and modified it with nanostructured Mg(OH)2 on the surface to treat excess phosphate. This phosphate adsorbent shows one of the highest phosphate adsorption capacities to date, 588.4 mg/g (1 order of magnitude higher than previously reported carbon-based adsorbents), and exhibits decent stability. A heterogeneous multilayer adsorption mechanism was proposed on the basis of multiple adsorption results. This highly efficient adsorbent from spent Li-ion batteries displays great potential to be utilized in industry, and the mechanism study paved a way for further design of the adsorbent for phosphate adsorption.

25 ENERGY STORAGE↗

Simple synthetic route to manganese-containing nanowires with the spinel crystal structure

This report describes a new route to synthesize single-crystalline manganese-containing spinel nanowires (NWs) by a two-step hydrothermal and solid-state synthesis. Interestingly, a nanowire or nanorod morphology is maintained during conversion from MnO{sub 2}/MnOOH to CuMn{sub 2}O{sub 4}/Mg{sub 2}MnO{sub 4}, despite the massive structural rearrangement this must involve. Linear sweep voltammetry (LSV) curves of the products give preliminary demonstration that CuMn{sub 2}O{sub 4} NWs are catalytically active towards the oxygen evolution reaction (OER) in alkaline solution, exhibiting five times the magnitude of current density found with pure carbon black. - Highlights: • Synthesis of single-crystalline manganese-containing spinel nanowires. • Binary oxide nanowire converted to ternary oxide wire through solid state reaction. • Approach to structure conversion with shape retention could be generally applicable. • Copper and Manganese display multiple oxidation states with potential for catalysis. • CuMn{sub 2}O{sub 4} nanowires show promise as catalysts for the oxygen evolution reaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Arsenic trioxide mediates HAPI microglia inflammatory response and subsequent neuron apoptosis through p38/JNK MAPK/STAT3 pathway

Arsenic is a widely distributed toxic metalloid all over the world. Inorganic arsenic species are supposed to affect astrocytic functions and to cause neuron apoptosis in CNS. Microglias are the key cell type involved in innate immune responses in CNS, and microglia activation has been linked to inflammation and neurotoxicity. In this study, using ELISA, we showed that Arsenic trioxide up-regulated the expression and secretion of IL-1β in a dose-dependent manner and a time-dependent manner in cultured HAPI microglia cells. The secretion of IL-1β caused the apoptosis of SH-SY5Y. These pro-inflammatory responses were inhibited by the STAT3 blocker, AG490 and P38/JNK MAPK blockers SB202190, SP600125. Further, Arsenic trioxide exposure could induce phosphorylation and activation of STAT3, and the translocation of STAT3 from the cytosol to the nucleus in this HAPI microglia cell line. Thus, the STAT3 signaling pathway can be activated after Arsenic trioxide treatment. However, P38/JNK MAPK blockers SB202190, SP600125 also obviously attenuated STAT3 activation and transnuclear transport induced by Arsenic trioxide. In concert with these results, we highlighted that the secretion of IL-1β and STAT3 activation induced by Arsenic trioxide can be mediated by elevation of P38/JNK MAPK in HAPI microglia cells and then induced the toxicity of neurons. - Highlights: • Arsenic trioxide exposure induced expression of IL-β in HAPI microglia. • Arsenic trioxide exposure induced activation of MAPK pathways in HAPI microglia. • Arsenic trioxide exposure induced activation of STAT3 pathways in HAPI microglia. • The expression of IL-β though P38/JNK MAPK/STAT3 pathways in HAPI microglia.

60 APPLIED LIFE SCIENCES↗

A method to improve the sensitivity of neutron porosity measurement based on D-T source

Compensated porosity logging tool utilizing deuterium-tritium (D-T) source shows a lower sensitivity to the variation of formation porosity compared with that adopting Am-Be source. In order to improve the sensitivity, the factors of an infinite homogeneous formation influencing slowing-down length and the near to far counts ratio are analyzed in this paper. Then Monte Carlo simulation method is used to build well logging models to study the responses of a neutron porosity logging tool to hydrogen index and formation density. It shows that in addition to hydrogen index, the variation of the density also has a great impact on slowing-down length and the ratio which reduces the response sensitivity to porosity. A new model depicts the relationship between the count ratio and porosity is proposed. Finally, when the model is used to process the measured ratio, the ratio shows improved dynamic range and sensitivity to porosity compared with the values without processing.

47 OTHER INSTRUMENTATION↗

Crystallization induced ordering of hard magnetic L1{sub 0} phase in melt-spun FeNi-based ribbons

The microstructure of newly developed hard magnetic Fe{sub 42}Ni{sub 41.3}Si{sub x}B{sub 12-x}P{sub 4}Cu{sub 0.7} (x = 2 to 8 at%) nanocrystalline alloy ribbons has been studied by transmission electron microscopy (TEM) and electron diffraction. A high-density polycrystalline grains, ∼30 nm in size, were formed in a ribbon after annealing at 673 K for 288 hours. Elemental mapping of the annealed specimen revealed the coexistence of three regions, Fe-rich, Ni-rich, and nearly equiatomic Fe-Ni, with areal fractions of 37%, 40%, and 23 %, respectively. The equiatomic L1{sub 0}-type ordered phase of FeNi was detected in between the Fe and Ni-rich phases. The presence of superlattice reflections in nanobeam electron diffraction patterns confirmed the formation of the hard magnetic L1{sub 0} phase beyond any doubt. The L1{sub 0} phase of FeNi was detected in alloys annealed in the temperature range of 673 to 813 K. The present results suggest that the order-disorder transition temperature of L1{sub 0} FeNi is higher than the previously reported value (593 K). The high diffusion rates of the constituent elements induced by the crystallization of an amorphous phase at relatively low temperature (∼673 K) are responsible for the development of atomic ordering in FeNi.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theoretical study on the top- and enclosed-contacted single-layer MoS{sub 2} piezotronic transistors

Recently, the piezotronic effect has been observed in two-dimensional single-layer MoS{sub 2} materials, which have potential applications in force and pressure triggered or controlled electronic devices, sensors, and human-machine interfaces. However, classical theory faces the difficulty in explaining the mechanism of the piezotronic effect for the top- and enclosed-contacted MoS{sub 2} transistors, since the piezoelectric charges are assumed to exist only at the edge of the MoS{sub 2} flake that is far from the electronic transport pathway. In the present study, we identify the piezoelectric charges at the MoS{sub 2}/metal-MoS{sub 2} interface by employing both the density functional theory and finite element method simulations. This interface is on the transport pathway of both top- and enclosed-contacted MoS{sub 2} transistors, thus it is capable of controlling their transport properties. This study deepens the understanding of piezotronic effect and provides guidance for the design of two-dimensional piezotronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Plasmon–phonon coupling in monolayer WS{sub 2}

The excitation of plasmon in metallic nanostructures produces intense and strongly localized near fields that enhance light-matter interaction. Here, we report plasmon–phonon coupling in monolayer WS{sub 2} deposited with gold and silver nanoparticles. The Raman spectra reveal phonon modes arising from the coupling between plasmon and WS{sub 2}. The localized surface plasmon resonance mediated excitation activates the Raman process without requiring defect for momentum conservation. Our results also reveal that the momentum induced by localized surface plasmon resonances losses to WS{sub 2} and the metal atoms adsorption modulated spin–orbit split are the two essential elements for the observed plasmon–phonon coupling. This work will open up exciting prospects for plasmon–phonon coupling in two dimensional systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mg-Enriched Engineered Carbon from Lithium-Ion Battery Anode for Phosphate Removal

Three Mg-enriched engineered carbons (mesocarbon microbeads, MCMB) were produced from lithium-ion battery anode using concentrated nitric acid oxidization and magnesium nitrate pretreatment. The obtained 15%Mg-MCMB, 30%Mg-MCMB, and 40%Mg-MCMB have magnesium level of 10.19, 19.13, and 19.96%, respectively. FTIR spectrum shows the functional groups present on the oxidized MCMB including OH, C=O, C–H, and C–O. XRD, SEM-EDX, and XPS analyses show that nanoscale Mg(OH) 2 and MgO particles were presented on the surface of the Mg-MCMB samples, which could serve as the main adsorption mechanism as to precipitate phosphate from aqueous solutions. The sorption experiments indicate that Mg modification dramatically promotes MCMB’s phosphate removal ability and phosphate removal rates reach as high as 95%. Thus, modification of the spent LIBs anode could provide a novel direction of preparing wastewater adsorbent and develop an innovative way to achieve sustainable development.

25 ENERGY STORAGE↗

Circular polarization analyzer with polarization tunable focusing of surface plasmon polaritons

A practical circular polarization analyzer (CPA) that can selectively focus surface plasmon polaritons (SPPs) at two separate locations, according to the helicity of the circularly polarized light, is designed and experimentally verified in the terahertz frequency range. The CPA consists of fishbone-slit units and is designed using the simulated annealing algorithm. By differentially detecting the intensities of the two SPPs focuses, the helicity of the incident circularly polarized light can be obtained and the CPA is less vulnerable to the noise of incident light. The proposed device may also have wide potential applications in chiral SPPs photonics and the analysis of chiral molecules in biology.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Reactive oxygen species mediate nitric oxide production through ERK/JNK MAPK signaling in HAPI microglia after PFOS exposure

Perfluorooctane sulfonate (PFOS), an emerging persistent contaminant that is commonly encountered during daily life, has been shown to exert toxic effects on the central nervous system (CNS). However, the molecular mechanisms underlying the neurotoxicity of PFOS remain largely unknown. It has been widely acknowledged that the inflammatory mediators released by hyper-activated microglia play vital roles in the pathogenesis of various neurological diseases. In the present study, we examined the impact of PFOS exposure on microglial activation and the release of proinflammatory mediators, including nitric oxide (NO) and reactive oxidative species (ROS). We found that PFOS exposure led to concentration-dependent NO and ROS production by rat HAPI microglia. We also discovered that there was rapid activation of the ERK/JNK MAPK signaling pathway in the HAPI microglia following PFOS treatment. Moreover, the PFOS-induced iNOS expression and NO production were attenuated after the inhibition of ERK or JNK MAPK by their corresponding inhibitors, PD98059 and SP600125. Interestingly, NAC, a ROS inhibitor, blocked iNOS expression, NO production, and activation of ERK and JNK MAPKs, which suggested that PFOS-mediated microglial NO production occurs via a ROS/ERK/JNK MAPK signaling pathway. Finally, by exposing SH-SY5Y cells to PFOS-treated microglia-conditioned medium, we demonstrated that NO was responsible for PFOS-mediated neuronal apoptosis. - Highlights: • PFOS exposure induced expression of iNOS and production of NO in HAPI microglia. • PFOS induced the production of ROS in HAPI microglia. • ERK/JNK MAPK pathways were activated following PFOS exposure in HAPI microglia. • NO released by HAPI microglia participated in the apoptosis of SH-SY5Y cells.

60 APPLIED LIFE SCIENCES↗

Effects of cation concentration on photocatalytic performance over magnesium vanadates

A series of magnesium vanadates (MgV {sub 2}O{sub 6}, Mg{sub 2}V {sub 2}O{sub 7}, and Mg{sub 3}V {sub 2}O{sub 8}) were synthesized to investigate the effect of cation concentration on photocatalytic performance. The samples were characterized by X-ray diffraction, field emission-scanning electron microscopy, UV-visible diffuse reflectance spectroscopy, and fluorescence spectroscopy. The photocatalytic O{sub 2} evolution experiments under visible light irradiation showed Mg{sub 2}V {sub 2}O{sub 7} exhibits the best performance, while Mg{sub 3}V {sub 2}O{sub 8} has the lowest activity. The density functional theory calculations indicated that the lowest unoccupied states of Mg{sub 3}V {sub 2}O{sub 8} are the mostly localized by the cation layers. The fluorescence spectra and fluorescence decay curves gave evident performances of excited states of magnesium vanadates and pointed out MgV {sub 2}O{sub 6} has a very short excited electron lift-time. Mg{sub 2}V {sub 2}O{sub 7} performs high photocatalytic activity because of its high electron mobility and long electron life-time.

36 MATERIALS SCIENCE↗

Temperature effects on the friction characteristics of graphene

An atomic force microscope is used to study the nanoscale frictional characteristics of graphene exfoliated onto weakly adherent silica substrates. Different from the decrease in the friction force with temperature for Si tips sliding on silica substrates, the friction forces for the same tip sliding on a graphene surface have an increasing trend with temperature. Through exploring the morphologies of graphene in both suspended and supported states and at different temperatures, it is found that surface fluctuations are the main reason behind the suppression of the thermal lubrication, which leads to an increase in the friction force with temperature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of oxygen content on transport and magnetic properties of PrBaCo{sub 2}O{sub 5.50+δ}

Samples of PrBaCo{sub 2}O{sub 5.50+δ} (δ = −0.15–0.14), synthesized by solid-state reactions, were investigated to ascertain oxygen compositional effects on transport/magnetic properties. Resistivity decreases with increasing oxygen content, indicative of p-type conduction. A metal-insulator transition was observed at 330 K only for sample PrBaCo{sub 2}O{sub 5.52}, coinciding with phase transition and spin-state transition of Co{sup 3+}. When δ deviates from zero, samples show insulator–insulator transitions, although for sample δ = 0.14, no transition occurs but only semi-conductive behavior appears. Electronic transport is governed by the hopping mechanism at lower temperatures and thermal activation at higher temperatures. All samples underwent paramagnetic–ferromagnetic–antiferromagnetic transitions, except PrBaCo{sub 2}O{sub 5.64}, which only went through a paramagnetic–ferromagnetic transition. The ferromagnetic state for δ < 0 originates with the Co{sup 3+}/Co{sup 2+} super-exchange interaction; for δ > 0, it stems from the Co{sup 3+}/Co{sup 4+} double exchange interaction.

36 MATERIALS SCIENCE↗

The Fertilizing Role of African Dust in the Amazon Rainforest. A First Multiyear Assessment Based on Data from Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations

The productivity of the Amazon rainforest is constrained by the availability of nutrients, in particular phosphorus (P). Deposition of long-range transported African dust is recognized as a potentially important but poorly quantified source of phosphorus. This study provides a first multiyear satellite-based estimate of dust deposition into the Amazon Basin using three dimensional (3D) aerosol measurements over 2007-2013 from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The 7-year average of dust deposition into the Amazon Basin is estimated to be 28 (8~48) Tg a -1 or 29 (8~50) kg ha -1 a -1 . The dust deposition shows significant interannual variation that is negatively correlated with the prior-year rainfall in the Sahel. The CALIOP-based multi-year mean estimate of dust deposition matches better with estimates from in-situ measurements and model simulations than a previous satellite-based estimate does. The closer agreement benefits from a more realistic geographic definition of the Amazon Basin and inclusion of meridional dust transport calculation in addition to the 3D nature of CALIOP aerosol measurements. The imported dust could provide about 0.022 (0.006~0.037) Tg P of phosphorus per year, equivalent to 23 (7~39) g P ha -1 a -1 to fertilize the Amazon rainforest. This out-of-Basin P input is comparable to the hydrological loss of P from the Basin, suggesting an important role of African dust in preventing phosphorus depletion on time scales of decades to centuries.

54 ENVIRONMENTAL SCIENCES↗