Engineering Papers⌕ Search

Engineering topics

Zhang, Yan

Publications and source records attributed to Zhang, Yan.

At least 109 records · Page 6

Using DR52c/Ni{sup 2+} mimotope tetramers to detect Ni{sup 2+} reactive CD4{sup +} T cells in patients with joint replacement failure

T cell mediated hypersensitivity to nickel (Ni{sup 2+}) is one of the most common causes of allergic contact dermatitis. Ni{sup 2+} sensitization may also contribute to the failure of Ni{sup 2+} containing joint implants, and revision to non-Ni{sup 2+} containing hardware can be costly and debilitating. Previously, we identified Ni{sup 2+} mimotope peptides, which are reactive to a CD4{sup +} T cell clone, ANi2.3 (Vα1, Vβ17), isolated from a Ni{sup 2+} hypersensitive patient with contact dermatitis. This T cell is restricted to the major histocompatibility complex class II (MHCII) molecule, Human Leukocyte Antigen (HLA)-DR52c (DRA, DRB3*0301). However, it is not known if Ni{sup 2+} induced T cell responses in sensitized joint replacement failure patients are similar to subjects with Ni{sup 2+} induced contact dermatitis. Here, we generated DR52c/Ni{sup 2+} mimotope tetramers, and used them to test if the same Ni{sup 2+} T cell activation mechanism could be generalized to Ni{sup 2+} sensitized patients with associated joint implant failure. We confirmed the specificity of these tetramers by staining of ANi2.3 T cell transfectomas. The DR52c/Ni{sup 2+} mimotope tetramer detected Ni{sup 2+} reactive CD4{sup +} T cells in the peripheral blood mononuclear cells (PBMC) of patients identified as Ni{sup 2+} sensitized by patch testing and a positive Ni{sup 2+} LPT. When HLA-typed by a DR52 specific antibody, three out of four patients were DR52 positive. In one patient, Ni{sup 2+} stimulation induced the expansion of Vβ17 positive CD4{sup +} T cells from 0.8% to 13.3%. We found that the percentage of DR52 positivity and Vβ17 usage in Ni{sup 2+} sensitized joint failure patients are similar to Ni sensitized skin allergy patients. Ni{sup 2+} independent mimotope tetramers may be a useful tool to identify the Ni{sup 2+} reactive CD4{sup +} T cells. - Highlight: • Nickel hypersensitive patients with implant failure are dominantly DR52 positive. • These patients may have similar TCR beta chain usage to that of contact dermatitis. • The nickel mimotope tetramers are a tool to identify the nickel reactive CD4{sup +} T cells.

60 APPLIED LIFE SCIENCES↗

MiR-129-5p inhibits non-small cell lung cancer cell stemness and chemoresistance through targeting DLK1

Non-small cell lung cancer (NSCLC) stemness and chemoresistance represent significant barriers to successful treatment. Downregulation of microRNA 129 (miR-129) has been implicated in a variety of cancers, and miR-129-5p has recently been shown to reduce lung cancer proliferation and metastasis. In this study, we used NSCLC cell lines A549 and H460 to investigate the effects of miR-129-5p on NSCLC stemness and chemoresistance. CD133 + stem cells in both lines showed reduced miR-129-5p expression, and introducing miR-129-5p into these cells reduced stem cell markers and self-renewal ability, as measured by qRT-PCR, western blot, MTT assays, and sphere formation assays. MTT, colony formation, and DAPI staining assays further revealed that miR-129-5p inhibits NSCLC chemoresistance when the cells are treated with varying doses of CDDP. The target prediction algorithm TargetScan allowed us to identify notch signaling receptor delta-like 1 homolog (DLK1) as a potential target for miR-129-5p in its inhibition of NSCLC stemness and chemoresistance. Indeed, our DLK1 luciferase reporter plasmid demonstrated that miR-129-5p reduces DLK1 expression. Furthermore, DLK1 overexpression partially rescued inhibition of NSCLC stemness and chemoresistance caused by miR-129-5p. Overall, these results demonstrate that miR-129-5p inhibits NSCLC stemness and chemoresistance through direct targeting of DLK1. They suggest that miR-129-5p and DLK1 can play a role in an effective treatment strategy for NSCLC.

60 APPLIED LIFE SCIENCES↗

Large thermopower from dressed quasiparticles in the layered cobaltates and rhodates

The origin of the large thermopower in Na x CoO 2 is complicated by correlation phenomena. To disentangle the effects from multiple interactions, we use angle-resolved photoemission to study K x RhO 2 , an isostructural analogy of Na x CoO 2 with large thermopower and weak electron correlation. In using the experimentally measured electronic structure, we demonstrate that the thermopower in K x RhO 2 can be quantitatively explained within the quasiparticle framework after including an electron-phonon mass enhancement effect. Extending the analysis to the cobaltate, we find the doubling in thermopower is well accounted for by additional band renormalization from electron correlation. Thus, the large thermopower emerges from the itinerant quasiparticles dressed by hierarchical electron-phonon and electron-electron interactions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Stripes developed at the strong limit of nematicity in FeSe film

A single monolayer of iron selenide grown on strontium titanate shows an impressive enhancement of superconductivity compared with the bulk, as well as a novel Fermi surface topology, extreme two-dimensionality, and the possibility of phonon-enhanced electron pairing. For films thicker than one unit cell, however, the electronic structure is markedly different, with a drastically suppressed superconductivity and strong nematicity appearing. The physics driving this extraordinary dichotomy of superconducting behaviour is far from clear. In this paper, we use low-temperature scanning tunnelling microscopy to study multilayers of iron selenide grown by molecular beam epitaxy, and find a stripe-type charge ordering instability that develops beneath the nematic state. The charge ordering is visible and pinned in the vicinity of impurities. And as it emerges in the strong limit of nematicity, it suggests that a magnetic fluctuation with a rather small wavevector may be competing with the ordinary collinear antiferromagnetic ordering in multilayer films. Finally, the existence of stripes in iron-based superconductors, which resemble the stripe order in cuprates, not only suggests that electronic anisotropy and correlation are playing an important role, but also provides a platform for probing the complex interactions between nematicity, charge ordering, magnetism and superconductivity in high-temperature superconductors.

36 MATERIALS SCIENCE↗

Expansion of CD26 positive fibroblast population promotes keloid progression

Background: Keloid is a skin fibrosis disease that characterised by invasive growth of fibroblasts and aberrant deposition of extracellular matrix. Studies indicated that keloid fibroblasts (KFs) is a class of ‘activated’ fibroblasts, which show accelerated proliferation and excessive extracellular matrix formation as compared with normal fibroblasts (NFs). However, the mechanism underlying keloid fibroblasts dysfunction is still unknown. Objective: To verify CD26 expression difference between KFs and NFs, and investigate the function of CD26 positive fibroblasts in keloid progression. Methods: KFs and NFs were isolated from Keloid tissues and normal skin tissues respectively. Flow cytometry was performed to isolate CD26+/CD26- fibroblasts from KFs and NFs. Proliferation of different fibroblasts were analyzed by CCK8 assay and Ki 67 straining. Profibrotic phenotype difference was detected by qRT-PCR, western blot, ELISA and immunofluorescence. Scratching experiment and transwell assay were used to assess invasion ability of CD26+/CD26- fibroblasts. Diprotin A was used as a CD26 inhibitor to further investigated the function of CD26 fibroblasts in keloid disease. Result: CD26 expression was increased in KFs, and the proportion of CD26+ fibroblasts was significantly increased in KFs. Cell viability analysis showed that CD26+ fibroblasts was more active in proliferation. Furthermore, the expression of profibrotic genes were increased in CD26+ fibroblasts, including TGF-β1, IGF-1, IL6, collagen 1, collagen 3 and fibronectin. And meanwhile, CD26+ fibroblasts showed stronger invasion ability as compared to CD26- fibroblasts. Moreover, Diprotin A significantly suppressed proliferation and extracellular matrix secretion of CD26+ fibroblasts isolated from keloid tissues. Conclusion: Our findings suggest that CD26+ fibroblasts possess proliferation advantage in compare to CD26- fibroblasts, and the advantage caused expansion of CD26 positive fibroblast population promotes keloid progression.

60 APPLIED LIFE SCIENCES↗

Amorphous Metallic NiFeP: A Conductive Bulk Material Achieving High Activity for Oxygen Evolution Reaction in Both Alkaline and Acidic Media

Here, the intrinsic catalytic activity at 10 mA cm –2 for oxygen evolution reaction (OER) is currently working out at overpotentials higher than 320 mV. A highly efficient electrocatalyst should possess both active sites and high conductivity; however, the loading of powder catalysts on electrodes may often suffer from the large resistance between catalysts and current collectors. This work reports a class of bulk amorphous NiFeP materials with metallic bonds from the viewpoint of electrode design. The materials reported here perfectly combine high macroscopic conductivity with surface active sites, and can be directly used as the electrodes with active sites toward high OER activity in both alkaline and acidic electrolytes. Specifically, a low overpotential of 219 mV is achieved at the geometric current density 10 mA cm –2 in an alkaline electrolyte, with the Tafel slope of 32 mV dec –1 and intrinsic overpotential of 280 mV. Meanwhile, an overpotential of 540 mV at 10 mA cm –2 is attained in an acidic electrolyte and stable for over 30 h, which is the best OER performance in both alkaline and acidic media. This work provides a different angle for the design of high–performance OER electrocatalysts and facilitates the device applications of electrocatalysts.

36 MATERIALS SCIENCE↗

Long non-coding RNA FBXL19-AS1 plays oncogenic role in colorectal cancer by sponging miR-203

Long non-coding RNAs (lncRNAs) have emerged as critical regulators of the progression of human cancers, including colorectal cancer (CRC). The study of genome-wide lncRNA expression patterns in metastatic CRC could provide novel mechanism underlying CRC carcinogenesis. In here, we determined the lncRNA expression profiles correlating to CRC with or without lymph node metastasis (LNM) based on microarray analysis. We found that 2439 lncRNAs and 1654 mRNAs were differentially expressed in metastatic CRC relative to primary CRC. Among these dysregulated lncRNAs, FBXL19-AS1 was the most significantly upregulated lncRNA in metastatic tumors. Functionally, knockdown of FBXL19-AS1 played tumor-suppressive effects by inhibiting cell proliferation, migration and invasion in vitro and tumor growth and metastasis in vivo. Overexpression of FBXL19-AS1 was markedly correlated with TNM stage and LNM in CRC. Bioinformatics analysis predicted that miR-203 was potentially targeted by FBXL19-AS1, which was confirmed by dual-luciferase reporter assay. Pearson's correlation analysis showed that miR-203 expression was negatively related to FBXL19-AS1 in tumor tissues. Finally, miR-203 inhibition abrogated the effect of FBXL19-AS1 knockdown on the proliferation and invasion of LoVo cells. Our results reveal the cancer-promoting effect of FBXL19-AS1, acting as a molecular sponge in negatively modulating miR-203, which might provide a new insight for understanding of CRC development. - Highlights: • LncRNA expression signature was different between metastatic and primary tumors. • Knockdown of FBXL19-AS1 inhibits proliferation, migration and invasion in vitro. • Knockdown of FBXL19-AS1 inhibits tumorigenesis and metastasis in vivo. • FBXL19-AS1 was upregulated in CRC tissues and related with lymph node metastasis. • FBXL19-AS1, acting as a molecular sponge in negatively regulating miR-203.

60 APPLIED LIFE SCIENCES↗

Electronic structure of heavy fermion system CePt 2 In 7 from angle-resolved photoemission spectroscopy

We have carried out high-resolution angle-resolved photoemission measurements on the Cebased heavy fermion compound CePt 2 In 7 that exhibits stronger two-dimensional character than the prototypical heavy fermion system CeCoIn 5 . Multiple Fermi surface sheets and a complex band structure are clearly resolved. We have also performed detailed band structure calculations on CePt 2 In 7 . The good agreement found between our measurements and the calculations suggests that the band renormalization effect is rather weak in CePt 2 In 7 . A comparison of the common features of the electronic structure of CePt 2 In 7 and CeCoIn5 indicates that CeCoIn 5 shows a much stronger band renormalization effect than CePt 2 In 7 . These results provide new information for understanding the heavy fermion behaviors and unconventional superconductivity in Ce-based heavy fermion systems.

36 MATERIALS SCIENCE↗

A vacuum ultraviolet photoionization study on high-temperature decomposition of JP-10 (exo-tetrahydrodicyclopentadiene)

Here, two sets of experiments were performed to unravel the high-temperature pyrolysis of tricyclo[5.2.1.02,6] decane (JP-10) exploiting high-temperature reactors over a temperature range of 1100 K to 1600 K, Advanced Light Source (ALS), and 927 K to 1083 K, National Synchrotron Radiation Laboratory (NSRL), with residence times of a few tens of microseconds (ALS) to typically 144 ms (NSRL). The products were identified in situ in supersonic molecular beams via single photon vacuum ultraviolet (VUV) photoionization coupled with mass spectroscopic detection in a reflectron time-of-flight mass spectrometer (ReTOF). These studies were designed to probe the initial (ALS) and also higher order reaction products (NSRL) formed in the decomposition of JP-10 – including radicals and thermally labile closed-shell species. Altogether 43 products were detected and quantified including C1–C4 alkenes, dienes, C3–C4 cumulenes, alkynes, eneynes, diynes, cycloalkenes, cyclo-dienes, aromatic molecules, and most importantly, radicals such as ethyl, allyl, and methyl produced at shorter residence times. At longer residence times, the predominant fragments were molecular hydrogen (H 2 ), ethylene (C 2 H 4 ), propene (C 3 H 6 ), cyclopentadiene (C 5 H 6 ), cyclopentene (C 5 H 8 ), fulvene (C 6 H 6 ), and benzene (C 6 H 6 ). Accompanied by electronic structure calculations, the initial JP-10 decomposition via C–H bond cleavages resulting in the formation of the initial six C 10 H 15 radicals was found to explain the formation of all products detected in both sets of experiments. These radicals are not stable under the experimental conditions and further decompose via C–C bond β-scission processes. These pathways result in ring opening in the initial tricyclic carbon skeletons of JP-10. Intermediates accessed after the first β-scission can further isomerize or dissociate. Complex PAH products in the NRLS experiment (naphthalene, acenaphthylene, biphenyl) are likely formed via molecular growth reactions at elevated residence times.

10 SYNTHETIC FUELS↗

Continuation of Long-Term Global SO2 Pollution Monitoring from OMI to OMPS

Over the past 20 years, advances in satellite remote sensing of pollution-relevant species have made space-borne observations an increasingly important part of atmospheric chemistry research and air quality management. This progress has been facilitated by advanced UV-vis spectrometers, such as the Ozone Monitoring Instrument (OMI) on board the NASA Earth Observing System (EOS) Aura satellite, and continues with new instruments, such as the Ozone Mapping and Profiler Suite (OMPS) on board the NASA-NOAA Suomi National Polar-orbiting Partnership (SNPP) satellite. In this study, we demonstrate that it is possible, using our state-of-the-art principal component analysis (PCA) retrieval technique, to continue the long-term global SO2 pollution monitoring started by OMI with the current and future OMPS instruments that will fly on the NOAA Joint Polar Satellite System (JPSS) 1, 2, 3, and 4 satellites in addition to SNPP, with a very good consistency of retrievals from these instruments. Since OMI SO2 data have been primarily used for (1) providing regional context on air pollution and long-range transport on a daily basis and (2) providing information on point emission sources on an annual basis after data averaging, we focused on these two aspects in our OMI-OMPS comparisons. Four years of retrievals (2012-2015) have been compared for three regions: eastern China, Mexico, and South Africa. In general, the comparisons show relatively high correlations (r = 0. 79-0.96) of daily regional averaged SO2 mass between the two instruments and near-unity regression slopes (0.76-0.97). The annual averaged SO2 loading differences between OMI and OMPS are small (< 0.03 Dobson unit (DU) over South Africa and up to 0.1 DU over eastern China). We also found a very good correlation (r = 0. 92-0.97) in the spatial distribution of annual averaged SO2 between OMI and OMPS over the three regions during 2012-2015. The emissions from ∼ 400 SO2 sources calculated with the two instruments also show a very good correlation (r = ∼ 0.9) in each year during 2012-2015. OMPS-detected SO2 point source emissions are slightly lower than those from OMI, but OMI-OMPS differences decrease with increasing strength of source. The OMI-OMPS SO2 mass differences on a pixel by pixel (daily) basis in each region can show substantial differences. The two instruments have a spatial correlation coefficient of 0.7 or better on < ∼ 50 % of the days. It is worth noting that consistent SO2 retrievals were achieved without any explicit adjustments to OMI or OMPS radiance data and that the retrieval agreement may be further improved by introducing a more comprehensive Jacobian lookup table than is currently used.

satellite remote sensing of pollution↗

TNF-α-inducing protein of Helicobacter pylori induces epithelial-mesenchymal transition (EMT) in gastric cancer cells through activation of IL-6/STAT3 signaling pathway

Tumor necrosis factor (TNF)-α-inducing protein (Tipα) is a newly identified carcinogenic factor secreted by Helicobacter pylori (H. pylori). Although it has been proved that Tipα is a strong inducer of epithelial-mesenchymal transition (EMT), a crucial process of migration, the exact molecular mechanism is unknown. Current evidence indicates that the oncogenic transcription factor signal transducers and activators of transcription 3 (STAT3) is inappropriately activated in multiple malignancies, including gastric cancer. In this study, we showed that Tipα significantly down-regulated the expression of EMT-related markers E-cadherin as well as up-regulated N-cadherin and vimentin in SGC7901 cells, with typical morphological changes of EMT. Tipα also promoted proliferation and migration of SGC7901 cells. Furthermore, Tipα activated interleukin-6 (IL-6)/STAT3 signaling pathway in SGC7901 cells. The effects of Tipα treatment observed was abolished when we block IL-6/STAT3 signaling pathway. Altogether, our data demonstrated that Tipα may accelerate tumor aggressiveness in gastric cancer by promoting EMT through activation of IL-6/STAT3 pathway. - Highlights: • Tipα induces EMT and activates IL-6/STAT3 pathway in gastric cancer cells. • IL-6/STAT3 pathway inhibition reverses Tipα-induced proliferation and migration in gastric cancer cells. • Tipα induces EMT in gastric cancer cells via IL-6/STAT3 pathway activation.

60 APPLIED LIFE SCIENCES↗

New-Generation NASA Aura Ozone Monitoring Instrument (OMI) Volcanic SO2 Dataset: Algorithm Description, Initial Results, and Continuation with the Suomi-NPP Ozone Mapping and Profiler Suite (OMPS)

Since the fall of 2004, the Ozone Monitoring Instrument (OMI) has been providing global monitoring of volcanic SO2 emissions, helping to understand their climate impacts and to mitigate aviation hazards. Here we introduce a new-generation OMI volcanic SO2 dataset based on a principal component analysis (PCA) retrieval technique. To reduce retrieval noise and artifacts as seen in the current operational linear fit (LF) algorithm, the new algorithm, OMSO2VOLCANO, uses characteristic features extracted directly from OMI radiances in the spectral fitting, thereby helping to minimize interferences from various geophysical processes (e.g., O3 absorption) and measurement details (e.g., wavelength shift). To solve the problem of low bias for large SO2 total columns in the LF product, the OMSO2VOLCANO algorithm employs a table lookup approach to estimate SO2 Jacobians (i.e., the instrument sensitivity to a perturbation in the SO2 column amount) and iteratively adjusts the spectral fitting window to exclude shorter wavelengths where the SO2 absorption signals are saturated. To first order, the effects of clouds and aerosols are accounted for using a simple Lambertian equivalent reflectivity approach. As with the LF algorithm, OMSO2VOLCANO provides total column retrievals based on a set of predefined SO2 profiles from the lower troposphere to the lower stratosphere, including a new profile peaked at 13 km for plumes in the upper troposphere. Examples given in this study indicate that the new dataset shows significant improvement over the LF product, with at least 50% reduction in retrieval noise over the remote Pacific. For large eruptions such as Kasatochi in 2008 (approximately 1700 kt total SO2/ and Sierra Negra in 2005 (greater than 1100DU maximum SO2), OMSO2VOLCANO generally agrees well with other algorithms that also utilize the full spectral content of satellite measurements, while the LF algorithm tends to underestimate SO2. We also demonstrate that, despite the coarser spatial and spectral resolution of the Suomi National Polar-orbiting Partnership (Suomi-NPP) Ozone Mapping and Profiler Suite (OMPS) instrument, application of the new PCA algorithm to OMPS data produces highly consistent retrievals between OMI and OMPS. The new PCA algorithm is therefore capable of continuing the volcanic SO2 data record well into the future using current and future hyperspectral UV satellite instruments.

OMI↗

Observation of Fermi arc and its connection with bulk states in the candidate type-II Weyl semimetal WTe2

A kind of topological material, the type-II Weyl semimetal, was proposed recently where the Weyl points emerge at the contact points of the electron and hole pockets, resulting in a highly tilted Weyl cone. In type-II Weyl semimetals, the Lorentz invariance is violated and a different type of Weyl fermion is generated that leads to intriguing physical properties. WTe 2 is interesting because it is predicted to be a good candidate for realizing type-II Weyl semimetals. By utilizing laser-based angle-resolved photoemission spectroscopy with high energy and momentum resolutions, we have revealed a full picture of the electronic structure of WTe 2 . A clear surface state has been identified and its connection with the bulk electronic states in the momentum and energy space shows good agreement with band structure calculations. Our results provide electronic signatures that are consistent with type-II Weyl states in WTe 2 . They lay a foundation for further investigations on the topological nature of WTe 2 and the exploration of unique phenomena and physical properties in type-II Weyl semimetals.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diffraction pattern simulation of cellulose fibrils using distributed and quantized pair distances

Intensity simulation of X-ray scattering from large twisted cellulose molecular fibrils is important in understanding the impact of chemical or physical treatments on structural properties such as twisting or coiling. This paper describes a highly efficient method for the simulation of X-ray diffraction patterns from complex fibrils using atom-type-specific pair-distance quantization. Pair distances are sorted into arrays which are labelled by atom type. Histograms of pair distances in each array are computed and binned and the resulting population distributions are used to represent the whole pair-distance data set. These quantized pair-distance arrays are used with a modified and vectorized Debye formula to simulate diffraction patterns. This approach utilizes fewer pair distances in each iteration, and atomic scattering factors are moved outside the iteration since the arrays are labelled by atom type. As a result, this algorithm significantly reduces the computation time while maintaining the accuracy of diffraction pattern simulation, making possible the simulation of diffraction patterns from large twisted fibrils in a relatively short period of time, as is required for model testing and refinement.

09 BIOMASS FUELS↗