Breakdown of hierarchical architecture in cellulose during dilute acid pretreatments
Abstract not provided
Engineering topics
Publications and source records attributed to Zhang, Yan.
Abstract not provided
High quality superconducting nanowires were fabricated from ultrathin MgB{sub 2} films by a focused ion beam milling technique. The precursor MgB{sub 2} films in 10 nm thick were grown on MgO substrates by using a hybrid physical-chemical vapor deposition method. The nanowires, in widths of about 300-600 nm and lengths of 1 or 10 μm, showed high superconducting critical temperatures (T{sub c}’s) above 34 K and narrow superconducting transition widths (ΔT{sub c}’s) of 1-3 K. The superconducting critical current density J{sub c} of the nanowires was above 5 × 10{sup 7} A/cm{sup 2} at 20 K. The high T{sub c}, narrow ΔT{sub c}, and high J{sub c} of the nanowires offered the possibility of making MgB{sub 2}-based nano-devices such as hot-electron bolometers and superconducting nanowire single-photon detectors with high operating temperatures at 15-20 K.
With angle-resolved photoemission spectroscopy, we studied the electronic structure of TaFe₁̣₂₃Te₃, a two-leg spin ladder compound with a novel antiferromagnetic ground state. Quasi-two-dimensional Fermi surface is observed, with sizable inter-ladder hopping. Moreover, instead of observing an energy gap at the Fermi surface in the antiferromagnetic state, we observed the shifts of various bands. Combining these observations with density-functional-theory calculations, we propose that the large scale reconstruction of the electronic structure, caused by the interactions between coexisting itinerant electrons and local moments, is most likely the driving force of the magnetic transition. Thus TaFe₁̣₂₃Te₃ serves as a simpler platform that contains similar ingredients as the parent compounds of iron-based superconductors.
Not Available
On the benefit of the concept of the so-called diluted magnetic oxides, Fe{sub x}(ZnO){sub 1–x} (x = 0.50–0.85) granular thin films with different thickness through 2D and 3D percolation region were prepared by ion beam assisted deposition. All samples are ferromagnetic at room-temperature due to the ferromagnetic nature of the Fe-doped ZnO matrix, which is quite different from the superparamagnetic behavior in the insulator-matrix based granular films. Along with decreasing thickness, the Hall coefficient R{sub S} is largely enhanced. The maximum R{sub S} reaches 4.27 × 10{sup −7} m{sup 3}/C in ∼2.8 nm Fe{sub 0.6}(ZnO){sub 0.4} granular film, which is nearly 9 times larger than the R{sub S} (4.64 × 10{sup −8} m{sup 3}/C) of the ∼50 nm Fe{sub 0.6}(ZnO){sub 0.4} sample. Meanwhile, the R{sub S} could maintain in a wide temperature region from 10 K to 300 K and the Hall sensitivity reaches ∼130 V/AT at room-temperature. The scaling exponential of n = 1.7 ± 0.1 in σ{sub xy}∼σ{sub xx}{sup n} is observed, fitting well with the recent developed universal scaling theory characterized by n = 1.6 in the dirty limit.
Explore the source record for details and available documents.
Not Available
A generator includes a substrate, a first electrode layer, a dense plurality of vertically-aligned piezoelectric elongated nanostructures, an insulating layer and a second electrode layer. The substrate has a top surface and the first electrode layer is disposed on the top surface of the substrate. The dense plurality of vertically-aligned piezoelectric elongated nanostructures extends from the first electrode layer. Each of the nanostructures has a top end. The insulating layer is disposed on the top ends of the nanostructures. The second electrode layer is disposed on the non-conductive layer and is spaced apart from the nanostructures.
Abstract not provided
The dissociation of H{sub 2} molecule is the first step for chemical storage of hydrogen, and the energy barrier of the dissociation is the key factor to decide the kinetics of the regeneration of the storage material. As a light element, aluminum is an important candidate component for storage materials with high gravimetric density. This paper investigates the adsorption and dissociation of H{sub 2} on carbon doping aluminum cluster Al{sub 6}C. The study shows that doping carbon into aluminum cluster can significantly change the electronic structure and increase the stability. Al{sub 6}C has a few stable isomers with close energies and their structures are quite flexible. The molecular adsorption of H{sub 2} on Al{sub 6}C is very weak, but the H{sub 2} molecule can be dissociated easily on this cluster. The stable product of the dissociated adsorption is searched and the different paths for the dissociation are investigated. During the dissociation of H{sub 2}, the structure of the cluster adjusts accordingly, and strong orbital interaction between the hydrogen and the cluster occurs. The calculated energy barrier for the dissociation is only 0.30 eV, which means the dissociation can take place at moderate temperatures.
The transcriptome is the readout of the genome. Identifying common features in it across distant species can reveal fundamental principles. To this end, the ENCODE and modENCODE consortia have generated large amounts of matched RNA-sequencing data for human, worm and fly. Uniform processing and comprehensive annotation of these data allow comparison across metazoan phyla, extending beyond earlier within-phylum transcriptome comparisons and revealing ancient, conserved features[1,2,3,4,5,6]. Specifically, we discovered co-expression modules shared across animals, many of which are enriched in developmental genes. Moreover, we used expression patterns to align the stages in worm and fly development, finding a novel pairing between worm embryo and fly pupae, in addition to the expected embryo-to-embryo and larvae-to-larvae pairings. Furthermore, we found that the extent of non-canonical, non-coding transcription is similar in each organism, per base-pair. Finally, we found in all three organisms the gene-expression levels, both coding and non-coding, can be quantitatively predicted from chromatin features at the promoter using a “universal model,” based on a single set of organism-independent parameters. Our comparison used the ENCODE-modENCODE RNA resource (Fig. ED1). This resource comprises: (1) deeply sequenced RNA-Seq data from many distinct samples from all three organisms; (2) comprehensive annotation of transcribed elements and (3) uniformly processed, standardized analysis files, focusing on non-coding transcription and expression patterns. Where practical, these datasets match comparable samples across organisms and to other types of functional genomics data. In total, the resource contains 575 different experiments containing >67B sequence reads. It encompasses many different RNA types, including poly(A)+, poly(A)- and ribosomal-RNA-depleted RNA and short and long RNA.
African dust can transport across the tropical Atlantic and reach the Amazon basin, exerting far-reaching impacts on climate in downwind regions. The transported dust influences the surface-atmosphere interactions and cloud and precipitation processes through perturbing the surface radiative budget and atmospheric radiative heating and acting as cloud condensation nuclei and ice nuclei. Dust also influences biogeochemical cycle and climate through providing nutrients vital to the productivity of ocean biomass and Amazon forests. Assessing these climate impacts relies on an accurate quantification of dust transport and deposition. Currently model simulations show extremely large diversity, which calls for a need of observational constraints. Kaufman et al. (2005) estimated from MODIS aerosol measurements that about 144 Tg of dust is deposited into the tropical Atlantic and 50 Tg of dust into the Amazon in 2001. This estimated dust import to Amazon is a factor of 3-4 higher than other observations and models. However, several studies have argued that the oversimplified characterization of dust vertical profile in the study would have introduced large uncertainty and very likely a high bias. In this study we quantify the trans-Atlantic dust transport and deposition by using 7 years (2007-2013) observations from CALIPSO lidar. CALIPSO acquires high-resolution aerosol extinction and depolarization profiles in both cloud-free and above-cloud conditions. The unique CALIPSO capability of profiling aerosols above clouds offers an unprecedented opportunity of examining uncertainties associated with the use of MODIS clear-sky data. Dust is separated from other types of aerosols using the depolarization measurements. We estimated that on the basis of 7-year average, 118142 Tg of dust is deposited into the tropical Atlantic and 3860 Tg of dust into the Amazon basin. Substantial interannual variations are observed during the period, with the maximum to minimum ratio of about 1.6 and 2.5 for the deposition to the tropical Atlantic and Amazon, respectively. The MODIS-based estimates appear to fall within the range of CALIPSO-based estimates; and the difference between MODIS and CALIPSO estimates can be largely attributed to the interannual variability, which is corroborated by long-term surface dust concentration observations in the tropical Atlantic. Considering that CALIPSO generally tends to underestimate the aerosol loading, our estimate is likely to represent a low bound for the dust transport and deposition estimate. The finding suggests that models have substantial biases and considerable effort is needed to improve model simulations of dust cycle.
Mesoporous silica materials with a range of morphology evolution, i.e., from curved rod-shaped mesoporous silica to straight rod-shaped mesoporous silica, were successfully prepared using polyvinylpyrrolidone (PVP) and triblock copolymer as dual template. The effects of PVP molecular weight and concentration on mesoporous silica structure parameters were studied. Results showed that surface area and pore volume continuously decreased with increased PVP molecular weight. Mesoporous silica prepared with PVP K30 also possessed larger pore diameter, interplanar spacing (d{sub 100}), and cell parameter (a{sub 0}) than that prepared with PVP K15 and PVP K90. In addition, with increased PVP concentration, d{sub 100} and a{sub 0} continuously decreased. The mechanism of morphology evolution caused by the change in PVP concentration was investigated. The conversion rate of lauric acid with 1-butanol catalyzed by immobilized Porcine pancreatic lipase (PPL) was also evaluated. Results showed that PPL immobilized on amino-functionalized straight rod-shaped mesoporous silica maintained 50% of its esterification conversion rate even after five cycles of use with a maximum conversion rate was about 90.15%. - Graphical abstract: Curved rod-shaped mesoporous silica can be obtained at low and the highest PVP concentration, while straight rod-shaped mesoporous silica can be obtained at higher PVP concentration. - Highlights: • Mesoporous silica with morphology evolution from CRMS to SRMS were prepared. • Effects of PVP molecular weight and concentration on silica morphology were studied. • A possible mechanism for the formation of morphology evolution SiO{sub 2} was proposed. • Esterification of lauric acid with 1-butanol catalyzed by immobilized PPL.
Graphical abstract: If the conduction band potential of In{sub 2}O{sub 3} is more negative than the corrosion potential of stainless steel, photo-induced electrons will be transferred from In{sub 2}O{sub 3} to the steel, thus shifting the potential of the steel into a corrosion immunity region and preventing the steel from the corrosion. - Highlights: • Indium oxide performed novel application under visible light. • Indium oxide by sol–gel method behaved better photoelectrochemical properties. • Electrons were transferred to stainless steel from indium oxide once light on. - Abstract: This paper reports the photoelectrochemical cathodic protection of 304 stainless steel by In{sub 2}O{sub 3} thin-film under visible-light. The films were fabricated with In{sub 2}O{sub 3} powders, synthesized by both sol–gel (In{sub 2}O{sub 3}-sg) and solid-state (In{sub 2}O{sub 3}-ss) processes. The photo-induced open circuit potential and the photo-to-current efficiency measurements suggested that In{sub 2}O{sub 3} could be a promising candidate material for photoelectrochemical cathodic protection of metallic alloys under visible light. Moreover, the polarization curve experimental results indicated that In{sub 2}O{sub 3}-sg thin-film can mitigate the corrosion potential of 304 stainless steel to much more negative values with a higher photocurrent density than the In{sub 2}O{sub 3}-ss film under visible-light illumination. All the results demonstrated that the In{sub 2}O{sub 3}-sg thin-film provides a better photoelectrochemical cathodic protection for 304 stainless steel than In{sub 2}O{sub 3}-ss thin-film under visible-light illumination. The higher photoelectrochemical efficiency is possibly due to the uniform thin films produced with the smaller particle size of In{sub 2}O{sub 3}-sg, which facilitates the transfer of the photo-induced electrons from bulk to the surface and suppresses the charge recombination of the electrons and holes.
Based on extensive first-principles calculations, we report the structural and electronic properties of fluorinated graphene, i.e., fluorographene nanoribbons (FGNRs) under uniaxial strain. Our results indicate that the FGNRs are semiconductors with wide direct band gaps regardless of their edge structures. Moreover, the band gap of FGNR can be effectively modulated nonlinearly with the applied uniaxial elastic strain, where the band gap value increases first and then reduces when the applied strain changes from −10.0% to 10.0%. This abnormal behavior mainly originates from the electronic structures of valence and conduction band edges, which is quite different from previously reported linear behavior on graphene nanoribbon. Our results imply the great potential applications of FGNRs in the optical electronics.