Engineering Papers⌕ Search

Engineering topics

Zettl, Alex

Publications and source records attributed to Zettl, Alex.

At least 91 records · Page 5

Geometry and electronic structure of iridium adsorbed on graphene

We report investigation of the geometry and electronic structure of iridium atoms adsorbed onto graphene through a combined experimental and theoretical study. Ir atoms were deposited onto a flake of graphene on a Pt(111) surface and found to form clusters even at low temperatures. The areal density of the observed clusters on the graphene flake suggests the clusters are most likely pairs of Ir atoms. Theoretical ab initio density functional (DFT) calculations indicate that these Ir dimers are oriented horizontally, near neighboring "bridge" sites of the graphene lattice, as this configuration has the strongest adsorption energy of all high-symmetry configurations for the Ir dimer. A large peak in the local density of states (LDOS) at the Dirac point energy was measured via scanning tunneling spectroscopy, and this result is reproduced by a DFT calculation of the LDOS. The peak at the Dirac point energy is found to be from the Ir s and p states. Finally, the LDOS in the monomer case was also calculated, and is found to significantly differ from the experimentally determined data, further supporting the hypothesis of low-temperature clustering.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Layer-Dependent Electronic Structure of Atomically Resolved Two-Dimensional Gallium Selenide Telluride

Alloying two-dimensional (2D) semiconductors provides a powerful method to tune their physical properties, especially those relevant to optoelectronic applications. However, as the crystal structure becomes more complex, it becomes increasingly difficult to accurately correlate response characteristics to detailed atomic structure. We investigate, via annular dark-field scanning transmission electron microscopy, electron energy loss spectroscopy, and second harmonic generation, the layered III-VI alloy GaSe 0.5 Te 0.5 as a function of layer number. The local atomic structure and stacking sequence for different layers is explicitly determined. We complement the measurements with first-principles calculations of the total energy and electronic band structure of GaSe 0.5 Te 0.5 for different crystal structures and layer number. The electronic band gap as well as the π and π + σ plasmons are found to be sensitive to layer number.

2D semiconductor alloys↗

A dielectric-defined lateral heterojunction in a monolayer semiconductor

Owing to their low dimensionality, two-dimensional semiconductors, such as monolayer molybdenum disulfide, have a range of properties that make them valuable in the development of nanoelectronics. For example, the electronic bandgap of these semiconductors is not an intrinsic physical parameter and can be engineered by manipulating the dielectric environment around the monolayer. Here in this paper we show that this dielectric-dependent electronic bandgap can be used to engineer a lateral heterojunction within a homogeneous MoS 2 monolayer. We visualize the heterostructure with Kelvin probe force microscopy and examine its influence on electrical transport experimentally and theoretically. We observe a lateral heterojunction with an approximately 90 meV band offset due to the differing degrees of bandgap renormalization of monolayer MoS 2 when it is placed on a substrate in which one segment is made from an amorphous fluoropolymer (Cytop) and another segment is made of hexagonal boron nitride. This heterostructure leads to a diode-like electrical transport with a strong asymmetric behaviour.

36 MATERIALS SCIENCE↗

Frustrated supercritical collapse in tunable charge arrays on graphene

The photon-like behavior of electrons in graphene causes unusual confinement properties that depend strongly on the geometry and strength of the surrounding potential. We report bottom-up synthesis of atomically-precise one-dimensional (1D) arrays of point charges on graphene that allow exploration of a new type of supercritical confinement of graphene carriers. The arrays were synthesized by arranging F 4 TCNQ molecules into a 1D lattice on back-gated graphene, allowing precise tuning of both the molecular charge and the array periodicity. While dilute arrays of ionized F 4 TCNQ molecules are seen to behave like isolated subcritical charges, dense arrays show emergent supercriticality. In contrast to compact supercritical clusters, these extended arrays display both supercritical and subcritical characteristics and belong to a new physical regime termed "frustrated supercritical collapse". Here carriers in the far-field are attracted by a supercritical charge distribution, but their fall to the center is frustrated by subcritical potentials in the near-field, similar to trapping of light by a dense cluster of stars in general relativity.

36 MATERIALS SCIENCE↗

Observation of highly dispersive bands in pure thin film C 60

While long-theorized, the direct observation of multiple highly dispersive ${\mathrm{C}}_{60}$ valence bands has eluded researchers for more than two decades due to a variety of intrinsic and extrinsic factors. We report a realization of multiple highly dispersive (330–520 meV) valence bands in pure thin film ${\mathrm{C}}_{60}$ on a novel substrate—the three-dimensional topological insulator ${\mathrm{Bi}}_{2}{\mathrm{Se}}_{3}$—through the use of angle-resolved photoemission spectroscopy (ARPES) and first-principles calculations. The effects of this novel substrate reducing ${\mathrm{C}}_{60}$ rotational disorder are discussed. Our results provide important considerations for past and future band structure studies as well as the increasingly popular ${\mathrm{C}}_{60}$ electronic device applications, especially those making use of heterostructures.

36 MATERIALS SCIENCE↗

Microscopy of hydrogen and hydrogen-vacancy defect structures on graphene devices

Here, we have used scanning tunneling microscopy (STM) to investigate two types of hydrogen defect structures on monolayer graphene supported by hexagonal boron nitride (h-BN) in a gated field-effect transistor configuration. The first H-defect type is created by bombarding graphene with 1-keV ionized hydrogen and is identified as two hydrogen atoms bonded to a graphene vacancy via comparison of experimental data to first-principles calculations. The second type of H defect is identified as dimerized hydrogen and is created by depositing atomic hydrogen having only thermal energy onto a graphene surface. Scanning tunneling spectroscopy (STS) measurements reveal that hydrogen dimers formed in this way open a new elastic channel in the tunneling conductance between an STM tip and graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Boron Doping and Defect Engineering of Graphene Aerogels for Ultrasensitive NO 2 Detection

In this study, boron-doped and defect-engineered graphene aerogels are prepared using triphenyl boron as a boron precursor and subsequent heat treatments. The boron chemistry and concentration in the graphene lattice are found to be highly dependent on the temperature used to activate boron. At 1500 °C, boron is incorporated at 3.2 atom % through a combination of B–C, B–N, and B–O bonds. At 1750 °C, the boron concentration decreases to 0.7 atom % and is predominantly incorporated through B–N bonding. Higher temperatures result in complete expulsion of boron from the lattice, leaving behind defects that are found to be beneficial for NO 2 gas detection. The gas sensing properties are explored to gain insight into the impact of boron chemistry on the sensing performance. A highly sensitive and selective conductometric NO 2 sensor is fabricated on a low-power microheater. Defect-engineered graphene aerogels with no boron remaining have superior gas detection properties. At an optimum sensing temperature of 240 °C, the defect-engineered aerogel has a theoretical detection limit of 7 ppb for NO 2 and response and recovery times of 100 and 300 s, respectively, with excellent selectivity over ammonia and hydrogen. Lastly, the superior gas sensing performance of defect-engineered graphene aerogels has remarkable implications for their performance in catalysis and energy storage applications.

36 MATERIALS SCIENCE↗

Correlation of Electron Tunneling and Plasmon Propagation in a Luttinger Liquid

Quantum-confined electrons in one dimension behave as a Luttinger liquid. However, unambiguous demonstration of Luttinger liquid phenomena in single-walled carbon nanotubes (SWNTs) has been challenging. In this work, we investigate well-defined SWNT cross junctions with a point contact between two Luttinger liquids and combine electrical transport and optical nanoscopy measurements to correlate completely different physical properties (i.e., the electron tunneling and the plasmon propagation) in the same Luttinger liquid system. Lastly, the suppressed electron tunneling at SWNT junctions exhibits a power-law scaling, which yields a Luttinger liquid interaction parameter that agrees quantitatively with that independently determined from the plasmon velocity based on the near-field optical nanoscopy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of ambient humidity and temperature on the NO 2 sensing characteristics of WS 2 /graphene aerogel

The effects of ambient humidity and temperature on the NO 2 sensing characteristics of WS 2 /graphene aerogel (WS 2 /GA) composite are investigated. In order to probe the gas sensing performances of WS 2 /GA, the sensor is fabricated by integrating WS 2 /GA with a microfabricated two-electrode device. The WS 2 /GA is characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nitrogen porosimetry. This hybrid nanomaterial is found to improve the selectivity to NO 2 , compared to control graphene and WS 2 aerogels. The NO 2 sensing performance of the WS 2 /GA-based sensors is investigated under different relative humidities (0–60%), and ambient temperatures (room temperature (RT) to 180 °C). In all instances, the sensors exhibit p-type behavior. In dry atmosphere, faster response and better recovery are obtained with increasing temperature, reaching optimum sensing performance around 180 °C. At room temperature, interestingly, humidity is found helpful for enhancing the response and recovery of the sensor to NO 2 . Detection limits in the range of 10–15 ppb NO 2 were determined. A potential gas sensing mechanism for this composite aerogel is introduced.

36 MATERIALS SCIENCE↗

Fabrication of Subnanometer-Precision Nanopores in Hexagonal Boron Nitride

Here, we demonstrate the fabrication of individual nanopores in hexagonal boron nitride (h-BN) with atomically precise control of the pore shape and size. Previous methods of pore production in other 2D materials typically create pores with irregular geometry and imprecise diameters. In contrast, other studies have shown that with careful control of electron irradiation, defects in h-BN grow with pristine zig-zag edges at quantized triangular sizes, but they have failed to demonstrate production and control of isolated defects. In this work, we combine these techniques to yield a method in which we can create individual size-quantized triangular nanopores through an h-BN sheet. The pores are created using the electron beam of a conventional transmission electron microscope; which can strip away multiple layers of h-BN exposing single-layer regions, introduce single vacancies, and preferentially grow vacancies only in the single-layer region. We further demonstrate how the geometry of these pores can be altered beyond triangular by changing beam conditions. Precisely size- and geometry-tuned nanopores could find application in molecular sensing, DNA sequencing, water desalination, and molecular separation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nanoparticle-based gas sensors and methods of using the same

Gas sensors are provided. The gas sensors include a gas sensing element having metal oxide nanoparticles and a thin-film heating element. Systems that include the gas sensors, as well as methods of using the gas sensors, are also provided. Embodiments of the present disclosure find use in a variety of different applications, including detecting whether an analyte is present in a gaseous sample.

36 MATERIALS SCIENCE↗

Short-channel field-effect transistors with 9-atom and 13-atom wide graphene nanoribbons

Bottom-up synthesized graphene nanoribbons and graphene nanoribbon heterostructures have promising electronic properties for high-performance field-effect transistors and ultra-low power devices such as tunneling field-effect transistors. However, the short length and wide band gap of these graphene nanoribbons have prevented the fabrication of devices with the desired performance and switching behavior. Here, by fabricating short channel (L ch ~ 20 nm) devices with a thin, high-κ gate dielectric and a 9-atom wide (0.95 nm) armchair graphene nanoribbon as the channel material, we demonstrate field-effect transistors with high on-current (I on > 1 μA at V d = -1 V) and high I on /I off ~ 10 5 at room temperature. We find that the performance of these devices is limited by tunneling through the Schottky barrier at the contacts and we observe an increase in the transparency of the barrier by increasing the gate field near the contacts. Our results thus demonstrate successful fabrication of high-performance short-channel field-effect transistors with bottom-up synthesized armchair graphene nanoribbons.

36 MATERIALS SCIENCE↗

Dynamics of Symmetry-Breaking Stacking Boundaries in Bilayer MoS 2

Crystal symmetry of two-dimensional (2D) materials plays an important role in their electronic and optical properties. Engineering symmetry in 2D materials has recently emerged as a promising way to achieve novel properties and functions. The noncentrosymmetric structure of monolayer transition metal dichalcogenides (TMDCs), such as molybdenum disulfide (MoS 2 ), has allowed for valley control via circularly polarized optical excitation. In bilayer TMDCs, inversion symmetry can be controlled by varying the stacking sequence, thus providing a pathway to engineer valley selectivity. Here, we report the in situ integration of AA' and AB stacked bilayer MoS 2 with different inversion symmetries by creating atomically sharp stacking boundaries between the differently stacked domains, via thermal stimulation and electron irradiation, inside an atomic-resolution scanning transmission electron microscopy. The setup enables us to track the formation and atomic motion of the stacking boundaries in real time and with ultrahigh resolution which enables in-depth analysis on the atomic structure at the boundaries. In conjunction with density functional theory calculations, we establish the dynamics of the boundary nucleation and expansion and further identify metallic boundary states. Our approach provides a means to synthesize domain boundaries with intriguing transport properties and opens up a new avenue for controlling valleytronics in nanoscale domains via real-time patterning of domains with different symmetry properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Density Tunable Graphene Aerogels Using a Sacrificial Polycyclic Aromatic Hydrocarbon

In this paper, we demonstrate a new strategy to tune the density of graphene aerogels. This facile method is capable of producing graphene aerogels over a wide density range without compromising the morphology or quality of the material. Perylenetetracarboxylic acid dianydride serves as a sacrificial filler material that can be thermally decomposed to yield a graphene aerogel with tunable density.

36 MATERIALS SCIENCE↗