Engineering Papers⌕ Search

Engineering topics

Zettl, Alex

Publications and source records attributed to Zettl, Alex.

At least 73 records · Page 4

Reversible writing of high-mobility and high-carrier-density doping patterns in two-dimensional van der Waals heterostructures

A key feature of two-dimensional materials is that the sign and concentration of their carriers can be externally controlled with techniques such as electrostatic gating. However, conventional electrostatic gating has limitations, including a maximum carrier density set by the dielectric breakdown, and ionic liquid gating and direct chemical doping also suffer from drawbacks. In this work, we show that an electron-beam-induced doping technique can be used to reversibly write high-resolution doping patterns in hexagonal boron nitride-encapsulated graphene and molybdenum disulfide (MoS 2 ) van der Waals heterostructures. The doped MoS 2 device exhibits an order of magnitude decrease of subthreshold swing compared with the device before doping, whereas the doped graphene devices demonstrate a previously inaccessible regime of high carrier concentration and high mobility, even at room temperature. We also show that the approach can be used to write high-quality p–n junctions and nanoscale doping patterns, illustrating that the technique can create nanoscale circuitry in van der Waals heterostructures.

36 MATERIALS SCIENCE↗

Visualization of the flat electronic band in twisted bilayer graphene near the magic angle twist

Bilayer graphene was theorized to host a moire miniband with flat dispersion if the layers are stacked at specific twist angles known as the magic angles. Recently, such twisted bilayer graphene (tBLG) with the first magic angle twist was reported to exhibit correlated insulating state and superconductivity, where the presence of the flat miniband in the system is thought to be essential for the emergence of these ordered phases in the transport measurements. Tunneling spectroscopy and electronic compressibility measurements in tBLG have revealed a van Hove singularity that is consistent with the presence of the flat miniband. However, a direct observation of the flat dispersion in the momentum-space of such moire miniband in tBLG is still elusive. Here, we report the visualization of the flat moire miniband by using angle-resolved photoemission spectroscopy with nanoscale resolution (nanoARPES). The high spatial resolution in nanoARPES enabled the measurement of the local electronic structure of the tBLG. We clearly demonstrate the existence of the flat moire band near the charge neutrality for tBLG close to the magic angle at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Self-assembly and metal-directed assembly of organic semiconductor aerogels and conductive carbon nanofiber aerogels with controllable nanoscale morphologies

A versatile and highly tunable synthesis for nanofiber aerogels based on the n-type organic semiconductor perylene tetracarboxylic diimide (PTCDI) is presented. PTCDI nanofiber aerogels are demonstrated to incorporate the organic semiconductor into a high surface area and porous morphology and can also be graphitized to synthesize carbon nanofiber (CNF) aerogels by thermal annealing. Using this approach, CNF aerogels with variable density and crystallinity are synthesized. Furthermore, by incorporating metal salts into the synthesis, metal-directed assembly yields a variety of nanoscale morphologies. The selection of post-synthesis thermal treatment can result in metal-directed assembly of PTCDI aerogels, low crystallinity graphitic aerogels decorated with metal nanoparticles, or highly crystalline graphitic aerogels with controllable nanoscale morphologies. The high surface area and porosity afforded by the aerogel morphology coupled with the intrinsic properties of PTCDI or CNFs is important for improving their performance in a number of applications including energy storage and catalysis.

36 MATERIALS SCIENCE↗

Orbital Character Effects in the Photon Energy and Polarization Dependence of Pure C 60 Photoemission

We report that recent direct experimental observation of multiple highly dispersive C 60 valence bands has allowed for a detailed analysis of the unusual photoemission traits of these features through photon energy- and polarization-dependent measurements. Previously obscured dispersions and strong photoemission traits are now revealed by specific light polarizations. The observed intensity effects prove the locking in place of the C 60 molecules at low temperatures and the existence of an orientational order imposed by the substrate chosen. Most importantly, photon energy- and polarization-dependent effects are shown to be intimately linked with the orbital character of the C 60 band manifolds which allow for a more precise determination of the orbital character within the third highest occupied molecular orbital (HOMO-2). In conclusion, our observations and analysis provide important considerations for the connection between molecular and crystalline C 60 electronic structure, past and future band structure studies, and for increasingly popular C 60 electronic device applications, especially those making use of heterostructures.

36 MATERIALS SCIENCE↗

Blue-light-emitting color centers in high-quality hexagonal boron nitride

Light emitters in wide-band-gap semiconductors are of great fundamental interest and have potential as optically addressable qubits. Here we describe a unique color center in high-quality hexagonal boron nitride (h-BN) with a sharp emission line at 435 nm. The emitters are activated and deactivated by electron beam irradiation and have spectral and temporal characteristics consistent with atomic color centers weakly coupled to lattice vibrations. The emitters are conspicuously absent from commercially available h-BN and are present in only ultrahigh-quality h-BN grown using a high-pressure, high-temperature Ba-B-N flux/solvent, suggesting that these emitters originate from impurities or related defects specific to this unique synthetic route. Lastly, our results imply that the light emission is activated and deactivated by electron beam manipulation of the charge state of an impurity-defect complex.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Tunable electronic structure in gallium chalcogenide van der Waals compounds

Transition-metal monochalcogenides comprise a class of two-dimensional materials with electronic band gaps that are highly sensitive to material thickness and chemical composition. Here, we explore the tunability of the electronic excitation spectrum in GaSe by using angle-resolved photoemission spectroscopy. The electronic structure of the material is modified by in situ potassium deposition as well as by forming GaS x Se 1- x alloy compounds. We find that potassium-dosed samples exhibit a substantial change of the dispersion around the valence-band maximum (VBM). The observed band dispersion resembles that of a single tetralayer and is consistent with a transition from the direct-gap character of the bulk to the indirect-gap character expected for monolayer GaSe. Upon alloying with sulfur, we observe a phase transition from AB to AA' stacking. Alloying also results in a rigid energy shift of the VBM towards higher binding energies, which correlates with a blueshift in the luminescence. The increase of the band gap upon sulfur alloying does not appear to change the dispersion or character of the VBM appreciably, implying that it is possible to engineer the gap of these materials while maintaining their salient electronic properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Sculpting Liquids with Two-Dimensional Materials: The Assembly of Ti 3 C 2 T x MXene Sheets at Liquid–Liquid Interfaces

The self-assembly of nanoscale materials at the liquid-liquid interface allows for fabrication of three-dimensionally structured liquids with nearly arbitrary geometries and tailored electronic, optical, and magnetic properties. Two-dimensional (2D) materials are highly anisotropic, with thicknesses on the order of a nanometer and lateral dimensions upward of hundreds of nanometers to micrometers. Controlling the assembly of these materials has direct implications for their properties and performance. We here describe the interfacial assembly and jamming of Ti 3 C 2 T x MXene nanosheets at the oil-water interface. Planar, as well as complex, programmed three-dimensional all-liquid objects are realized. Finally, our approach presents potential for the creation of all-liquid 3D-printed devices for possible applications in all-liquid electrochemical and energy storage devices and electrically active, all-liquid fluidics that exploits the versatile structure, functionality, and reconfigurability of liquids.

2D materials↗

Identification of spin, valley and moiré quasi-angular momentum of interlayer excitons

Moiré superlattices provide a powerful way to engineer properties of electrons and excitons in two-dimensional van der Waals heterostructures. The moir\'e effect can be especially strong for interlayer excitons, where electrons and holes reside in different layers and can be addressed separately. In particular, it was recently proposed that the moiré superlattice potential not only localizes interlayer exciton states at different superlattice positions, but also hosts an emerging moiré quasi-angular momentum (QAM) that periodically switches the optical selection rules for interlayer excitons at different moiré sites. Here we report the observation of multiple interlayer exciton states coexisting in a WSe 2 /WS 2 moiré superlattice and unambiguously determine their spin, valley, and moiré QAM through novel resonant optical pump-probe spectroscopy and photoluminescence excitation spectroscopy. We demonstrate that interlayer excitons localized at different moiré sites can exhibit opposite optical selection rules due to the spatially-varying moiré QAM. Finally, our observation reveals new opportunities to engineer interlayer exciton states and valley physics with moiré superlattices for optoelectronic and valleytronic applications.

74 ATOMIC AND MOLECULAR PHYSICS↗

Electrically Driven Dynamics of Few‐Chain NbSe 3

An in situ transmission electron microscopy study of few‐chain NbSe 3 encapsulated within the hollow core of carbon nanotubes is presented, where the tube/chain system is subjected to applied axial electrical currents. Electromigration and thermal excitation forces result in collective and individual chain dynamics, with concomitant radial deformations of the encapsulating tubes.

Pham, Thang↗

Valley-dependent exciton fine structure and Autler–Townes doublets from Berry phases in monolayer MoSe 2

The Berry phase of Bloch states can have profound effects on electron dynamics and lead to novel transport phenomena, such as the anomalous Hall effect and the valley Hall effect. Recently, it was predicted that the Berry phase effect can also modify the exciton states in transition metal dichalcogenide monolayers, and lift the energy degeneracy of exciton states with opposite angular momentum through an effective valley-orbital coupling. Here, we report the observation and control of the Berry phase-induced splitting of the 2p exciton states in monolayer molybdenum diselenide (MoSe 2 ) using the intraexciton optical Stark spectroscopy. We observe the time-reversal-symmetric analogue of the orbital Zeeman effect resulting from the valley-dependent Berry phase, which leads to energy difference of +14 (-14) meV between the 2p+ and 2p- exciton states in the K (K') valley, consistent with the ordering from our ab initio GW-Bethe–Salpeter equation results. In addition, we show that the light–matter coupling between intraexciton states is remarkably strong, leading to a prominent valley-dependent Autler–Townes doublet under resonant driving. Finally, our study opens up pathways to coherently manipulate the quantum states and excitonic excitation with infrared radiation in two-dimensional semiconductors.

36 MATERIALS SCIENCE↗

Metal-insulator transition in quasi-one-dimensional HfTe 3 in the few-chain limit

The quasi-one-dimensional linear chain compound HfTe 3 is experimentally and theoretically explored in the few- to single-chain limit. Confining the material within the hollow core of carbon nanotubes allows isolation of the chains and prevents the rapid oxidation which plagues even bulk HfTe 3 . High-resolution transmission electron microscopy coupled with density functional theory calculations reveals that, once the triple-chain limit is reached, the normally parallel chains spiral about each other, and simultaneously a short-wavelength trigonal anti-prismatic rocking distortion occurs that opens a significant energy gap. This ends in a size-driven metal-insulator transition.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ultrahigh-Temperature Ceramic Aerogels

In this work, we demonstrate the synthesis of high-surface-area, low-density refractory aerogels. The monolithic hafnium boride (HfB 2 ) and zirconium boride (ZrB 2 ) aerogels are prepared via borothermal reduction of precursor hafnia and zirconia aerogels, respectively, consisting of a fine mixture of boron nanoparticles and the metal oxide. This precursor boron–metal oxide (B–MO 2 ) composite aerogel was synthesized by modifying the pure ethanol solvent typically used in the epoxide-initiated sol–gel synthesis of metal oxide aerogels with an ethanolic boron nanoparticle suspension. After reduction, precursor aerogels are converted to metal boride aerogels containing primary particles in the sub-100 nm regime. The relative densities of the HfB 2 and ZrB 2 aerogels are 3 and 7%, respectively, and could be tailored by simply changing the density of the precursor aerogels via modifying the reagent concentrations or the drying conditions. Thermal conductivities of the ZrB 2 monoliths ranged from 0.18 to 0.33 W/(m K). The surface areas of the HfB 2 and ZrB 2 aerogels were 10 and 19 m 2 /g, respectively. Lastly, successful reduction of the aerogels to the diboride phase was confirmed by X-ray diffraction.

36 MATERIALS SCIENCE↗

Metallo‐Hydrogel‐Assisted Synthesis and Direct Writing of Transition Metal Dichalcogenides

Abstract Two dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted interest for their compelling nanoscale new properties and numerous potential applications including fast optoelectronic devices, ultrathin photovoltaics, and high‐performance catalysts. Large‐scale growth of uniform TMDC materials is essential for investigating their physics and for their integration into devices. However, the wafer scale deposition of TMDCs on arbitrary nonselective substrates is still beyond the current state‐of‐the‐art. In this article, a method to synthesize layered TMDCs (MoS 2 and WS 2 ) at the wafer‐scale by sulfurization of transition metal ions (Mo 5+ and W 6+ ) in a gelatin template (metallo‐hydrogel) is reported. This process is adaptable to versatile substrates, including amorphous silicon oxide, high‐temperature quartz, and silicon. Although the products are nominally few layer materials, direct band photoluminescent (≈1.8 eV), similar to single‐ or decoupled multilayer MoS 2 is observed. Finally, the solution‐based deposition enables contact printing of TMDC channels to be useable for device applications including thin film transistors with printed silver contacts using the same process.

Zang, Xining↗

Alternative Stacking Sequences in Hexagonal Boron Nitride

The relative orientation of successive sheets, i.e. the stacking sequence, in layered two-dimensional materials is central to the electronic, thermal, and mechanical properties of the material. Often different stacking sequences have comparable cohesive energy, leading to alternative stable crystal structures. Here we theoretically and experimentally explore different stacking sequences in the van der Waals bonded material hexagonal boron nitride (h-BN). We examine the total energy, electronic bandgap, and dielectric response tensor for five distinct high symmetry stacking sequences for both bulk and bilayer forms of h-BN. Two sequences, the generally assumed AA' sequence and the relatively unknown (for h-BN) AB (Bernal) sequence, are predicted to have comparably low energy. Lastly, we present a scalable modified chemical vapor deposition method that produces large flakes of virtually pure AB stacked h-BN; this new material complements the generally available AA' stacked h-BN.

36 MATERIALS SCIENCE↗

Highly crystalline 3D graphene

Disclosed here is a composition comprising at least one graphene aerogel comprising a three-dimensional structure of graphene sheets, wherein the graphene sheets are covalently interconnected, and wherein the graphene aerogel is highly crystalline. Also described is a method for making a graphene aerogel, comprising preparing a mixture comprising a graphene oxide suspension and at least one catalyst; curing the reaction mixture to produce a wet gel; drying the wet gel to produce a dry gel; and pyrolyzing the dry gel at a temperature of 1500-3500° C. to produce the graphene aerogel.

36 MATERIALS SCIENCE↗

Wafer-scale on-chip synthesis and field emission properties of vertically aligned boron nitride based nanofiber arrays

One dimensional boron nitride (BN) nanomaterials with a high aspect ratio are of great interest due to their unique properties and potential applications. However, BN nanomaterials are generally difficult to synthesize. Here, we describe the creation of arrays of vertically aligned pure BN nanofibers and BN coated carbon nanofibers, fabricated on-chip via a straightforward template-assisted chemical conversion reaction. The template, a glassy carbon nanofiber array, is produced by plasma processing of conventional photoresists. The method is highly controllable, patternable, and scalable, and the final arrays can be fabricated over large areas with a controlled fiber length. We characterize the electron field emission properties of the BN-coated carbon nanofiber array and find a large field enhancement factor, low turn-on voltage, and good stability. The outstanding field emission performance results from the small tip size and high aspect ratio of the nanofiber as well as the high chemical stability and high thermal conductivity of the BN coating.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of moiré excitons in WSe 2 /WS 2 heterostructure superlattices

Moiré superlattices enable the generation of new quantum phenomena in two-dimensional heterostructures, in which the interactions between the atomically thin layers qualitatively change the electronic band structure of the superlattice. For example, mini-Dirac points, tunable Mott insulator states and the Hofstadter butterfly pattern can emerge in different types of graphene/boron nitride moiré superlattices, whereas correlated insulating states and superconductivity have been reported in twisted bilayer graphene moiré superlattices. In addition to their pronounced effects on single-particle states, moiré superlattices have recently been predicted to host excited states such as moiré exciton bands. Here we report the observation of moiré superlattice exciton states in tungsten diselenide/tungsten disulfide (WSe 2 /WS 2 ) heterostructures in which the layers are closely aligned. These moiré exciton states manifest as multiple emergent peaks around the original WSe 2 A exciton resonance in the absorption spectra, and they exhibit gate dependences that are distinct from that of the A exciton in WSe 2 monolayers and in WSe 2 /WS 2 heterostructures with large twist angles. These phenomena can be described by a theoretical model in which the periodic moiré potential is much stronger than the exciton kinetic energy and generates multiple flat exciton minibands. The moiré exciton bands provide an attractive platform from which to explore and control excited states of matter, such as topological excitons and a correlated exciton Hubbard model, in transition-metal dichalcogenides.

36 MATERIALS SCIENCE↗