Engineering Papers⌕ Search

Engineering topics

Zettl, Alex

Publications and source records attributed to Zettl, Alex.

At least 109 records · Page 6

Preventing Thin Film Dewetting via Graphene Capping

A monolayer 2D capping layer with high Young's modulus is shown to be able to effectively suppress the dewetting of underlying thin films of small organic semiconductor molecule, polymer, and polycrystalline metal, respectively. To verify the universality of this capping layer approach, the dewetting experiments are performed for single‐layer graphene transferred onto polystyrene (PS), semiconducting thienoazacoronene (EH‐TAC), gold, and also MoS 2 on PS. Thermodynamic modeling indicates that the exceptionally high Young's modulus and surface conformity of 2D capping layers such as graphene and MoS 2 substantially suppress surface fluctuations and thus dewetting. As long as the uncovered area is smaller than the fluctuation wavelength of the thin film in a dewetting process via spinodal decomposition, the dewetting should be suppressed. The 2D monolayer‐capping approach opens up exciting new possibilities to enhance the thermal stability and expands the processing parameters for thin film materials without significantly altering their physical properties.

Cao, Peigen↗

3D MoS 2 Aerogel for Ultrasensitive NO 2 Detection and Its Tunable Sensing Behavior

A high-performance NO 2 sensor based on the 3D MoS 2 aerogel is introduced. Compared to single- or few-layer MoS2, 3D assemblies of 2D MoS 2 provide more surface area per footprint with a simple and scalable synthesis. Integration of the 3D MoS 2 aerogel on a low-power microheater platform is demonstrated, and the sensing behavior of the 3D MoS 2 aerogel is investigated. A two-step sulfurization treatment is developed to obtain a high-quality MoS 2 aerogel with strong sensing performance. The aerogel exhibits low detection limit (50 ppb) toward NO 2 at room temperature, while after the two-step sulfurization treatment, it also exhibits fast response and recovery at low heater temperature of 200 °C, with no decrease in sensitivity. The observed p-type sensing behavior of MoS 2 aerogel is discussed and identified as being controlled by the defect state (as probed by the S:Mo ratio). Furthermore, annealing in a hydrogen environment changes the defect state of the MoS 2 aerogel by creating more sulfur vacancies; concomitantly, a transition from p-type sensing behavior to n-type sensing is observed

36 MATERIALS SCIENCE↗

Narrowband noise study of sliding charge density waves in NbSe 3 nanoribbons

Transport properties (dc electrical resistivity, threshold electric field, and narrow-band noise) are reported for nanoribbon specimens of NbSe 3 with thicknesses as low as 18 nm. As the sample thickness decreases, the resistive anomalies characteristic of the charge density wave (CDW) state are suppressed and the threshold fields for nonlinear CDW conduction apparently diverge. Narrow-band noise measurements allow determination of the concentration of carriers condensed in the CDW state n c , reflective of the CDW order parameter Δ. Although the CDW transition temperatures are relatively independent of sample thickness, in the lower CDW state Δ decreases dramatically with decreasing sample thickness.

36 MATERIALS SCIENCE↗

The Use of Graphene and Its Derivatives for Liquid-Phase Transmission Electron Microscopy of Radiation-Sensitive Specimens

We present that one of the key challenges facing liquid-phase transmission electron microscopy (TEM) of biological specimens has been the damaging effects of electron beam irradiation. The strongly ionizing electron beam is known to induce radiolysis of surrounding water molecules, leading to the formation of reactive radical species. In this study, we employ DNA-assembled Au nanoparticle superlattices (DNA-AuNP superlattices) as a model system to demonstrate that graphene and its derivatives can be used to mitigate electron beam-induced damage. We can image DNA-AuNP superlattices in their native saline environment when the liquid cell window material is graphene, but not when it is silicon nitride. In the latter case, initial dissociation of assembled AuNPs was followed by their random aggregation and etching. Using graphene-coated silicon nitride windows, we were able to replicate the observation of stable DNA-AuNP superlattices achieved with graphene liquid cells. We then carried out a correlative Raman spectroscopy and TEM study to compare the effect of electron beam irradiation on graphene with and without the presence of water and found that graphene reacts with the products of water radiolysis. We attribute the protective effect of graphene to its ability to efficiently scavenge reactive radical species, especially the hydroxyl radicals which are known to cause DNA strand breaks. We confirmed this by showing that stable DNA-AuNP assemblies can be imaged in silicon nitride liquid cells when graphene oxide and graphene quantum dots, which have also recently been reported as efficient radical scavengers, are added directly to the solution. Lastly, we anticipate that our study will open up more opportunities for studying biological specimens using liquid-phase TEM with the use of graphene and its derivatives as biocompatible radical scavengers to alleviate the effects of radiation damage.

36 MATERIALS SCIENCE↗

Automatic software correction of residual aberrations in reconstructed HRTEM exit waves of crystalline samples

Abstract We develop an automatic and objective method to measure and correct residual aberrations in atomic-resolution HRTEM complex exit waves for crystalline samples aligned along a low-index zone axis. Our method uses the approximate rotational point symmetry of a column of atoms or single atom to iteratively calculate a best-fit numerical phase plate for this symmetry condition, and does not require information about the sample thickness or precise structure. We apply our method to two experimental focal series reconstructions, imaging a β-Si 3 N 4 wedge with O and N doping, and a single-layer graphene grain boundary. We use peak and lattice fitting to evaluate the precision of the corrected exit waves. We also apply our method to the exit wave of a Si wedge retrieved by off-axis electron holography. In all cases, the software correction of the residual aberration function improves the accuracy of the measured exit waves.

36 MATERIALS SCIENCE↗

Tuning charge and correlation effects for a single molecule on a graphene device

The ability to understand and control the electronic properties of individual molecules in a device environment is crucial for developing future technologies at the nanometre scale and below. Achieving this, however, requires the creation of three-terminal devices that allow single molecules to be both gated and imaged at the atomic scale. We have accomplished this by integrating a graphene field effect transistor with a scanning tunnelling microscope, thus allowing gate-controlled charging and spectroscopic interrogation of individual tetrafluoro-tetracyanoquinodimethane molecules. We observe a non-rigid shift in the molecule’s lowest unoccupied molecular orbital energy (relative to the Dirac point) as a function of gate voltage due to graphene polarization effects. Our results show that electron–electron interactions play an important role in how molecular energy levels align to the graphene Dirac point, and may significantly influence charge transport through individual molecules incorporated in graphene-based nanodevices.

36 MATERIALS SCIENCE↗

Synthesis of graphene nanoribbons inside boron nitride nanotubes

We report on bottom‐up synthesis of graphene nanoribbons inside boron nitride nanotubes, using coronene molecules as building blocks. The synthesized ribbons are one or two coronene molecules wide, depending on the diameter of the host nanotube. The encapsulated carbon nanostructures can be eliminated from the inner cavity of the filled boron nitride nanotube via oxidation without any damage to the nanotube structure.

Barzegar, Hamid Reza↗

Selenium capped monolayer NbSe 2 for two-dimensional superconductivity studies

Superconductivity in monolayer niobium diselenide (NbSe 2 ) on bilayer graphene is studied by electrical transport. Monolayer NbSe 2 is grown on bilayer graphene by molecular beam epitaxy and capped with a selenium film to avoid degradation in air. The selenium capped samples have T C = 1.9 K. In situ measurements down to 4 K in ultrahigh vacuum show that the effect of the selenium layer on the transport is negligible. Lastly, the superconducting transition and upper critical fields in air exposed and selenium capped samples are compared. Schematic of monolayer NbSe 2 /bilayer graphene with selenium capping layer and electrical contacts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging electrostatically confined Dirac fermions in graphene quantum dots

Electrostatic confinement of charge carriers in graphene is governed by Klein tunnelling, a relativistic quantum process in which particle-hole transmutation leads to unusual anisotropic transmission at p-n junction boundaries. Reflection and transmission at these boundaries affect the quantum interference of electronic waves, enabling the formation of novel quasi-bound states. Here we report the use of scanning tunnelling microscopy to map the electronic structure of Dirac fermions confined in quantum dots defined by circular graphene p-n junctions. The quantum dots were fabricated using a technique involving local manipulation of defect charge within the insulating substrate beneath a graphene monolayer. Inside such graphene quantum dots we observe resonances due to quasi-bound states and directly visualize the quantum interference patterns arising from these states. Outside the quantum dots Dirac fermions exhibit Friedel oscillation-like behaviour. Bolstered by a theoretical model describing relativistic particles in a harmonic oscillator potential, our findings yield insights into the spatial behaviour of electrostatically confined Dirac fermions.

74 ATOMIC AND MOLECULAR PHYSICS↗

High Surface Area MoS 2 /Graphene Hybrid Aerogel for Ultrasensitive NO 2 Detection

A MoS 2 /graphene hybrid aerogel synthesized with two-dimensional MoS 2 sheets coating a high surface area graphene aerogel scaffold is characterized and used for ultrasensitive NO 2 detection. The combination of graphene and MoS 2 leads to improved sensing properties with the graphene scaffold providing high specific surface area and high electrical and thermal conductivity and the single to few-layer MoS2 sheets providing high sensitivity and selectivity to NO 2 . The hybrid aerogel is integrated onto a low-power microheater platform to probe the gas sensing performance. At room temperature, the sensor exhibits an ultralow detection limit of 50 ppb NO 2 . By heating the material to 200 °C, the response and recovery times to reach 90% of the final signal decrease to <1 min, while retaining the low detection limit. The MoS 2 /graphene hybrid also shows good selectivity for NO 2 against H 2 and CO, especially when compared to bare graphene aerogel. The unique structure of the hybrid aerogel is responsible for the ultrasensitive, selective, and fast NO 2 sensing. The improved sensing performance of this hybrid aerogel also suggests the possibility of other 2D material combinations for further sensing applications.

36 MATERIALS SCIENCE↗

Identifying different stacking sequences in few-layer CVD-grown Mo S 2 by low-energy atomic-resolution scanning transmission electron microscopy

We present that atomically thin MoS 2 grown by chemical vapor deposition (CVD) is a promising candidate for next-generation electronics due to inherent CVD scalability and controllability. However, it is well known that the stacking sequence in few-layer MoS 2 can significantly impact electrical and optical properties. Herein we report different intrinsic stacking sequences in CVD-grown few-layer MoS 2 obtained by atomic-resolution annular-dark-field imaging in an aberration-corrected scanning transmission electron microscope operated at 50 keV. Trilayer MoS 2 displays a new stacking sequence distinct from the commonly observed 2H and 3R phases of MoS 2 . Finally, density functional theory is used to examine the stability of different stacking sequences, and the findings are consistent with our experimental observations.

36 MATERIALS SCIENCE↗

Platinum Nanoparticle Loading of Boron Nitride Aerogel and Its Use as a Novel Material for Low-Power Catalytic Gas Sensing

We report that a high-surface-area, highly crystalline boron nitride aerogel synthesized with nonhazardous reactants has been loaded with crystalline platinum nanoparticles to form a novel nanomaterial that exhibits many advantages for use in a catalytic gas sensing application. The platinum nanoparticle-loaded boron nitride aerogel integrated onto a microheater platform allows for calorimetric propane detection. The boron nitride aerogel exhibits thermal stability up to 900 °C and supports disperse platinum nanoparticles, with no sintering observed after 24 h of high-temperature testing. The high thermal conductivity and low density of the boron nitride aerogel result in an order of magnitude faster response and recovery times (<2 s) than reported on alumina support and allow for 10% duty cycling of the microheater with no loss in sensitivity. Lastly, the resulting 1.5 mW sensor power consumption is two orders of magnitude less than commercially available catalytic gas sensors and unlocks the potential for wireless, battery-powered catalytic gas sensing.

36 MATERIALS SCIENCE↗

Real-Time Observation of Water-Soluble Mineral Precipitation in Aqueous Solution by In Situ High-Resolution Electron Microscopy

The precipitation and dissolution of water-soluble minerals in aqueous systems is a familiar process occurring commonly in nature. Understanding mineral nucleation and growth during its precipitation is highly desirable, but past in situ techniques have suffered from limited spatial and temporal resolution. In this paper, by using in situ graphene liquid cell electron microscopy, mineral nucleation and growth processes are demonstrated in high spatial and temporal resolution. We precipitate the mineral thenardite (Na 2 SO 4 ) from aqueous solution with electron-beam-induced radiolysis of water. We demonstrate that minerals nucleate with a two-dimensional island structure on the graphene surfaces. We further reveal that mineral grains grow by grain boundary migration and grain rotation. Finally, our findings provide a direct observation of the dynamics of crystal growth from ionic solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗