Engineering Papers⌕ Search

Engineering topics

Yang, Wanli

Publications and source records attributed to Yang, Wanli.

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Surface Vacancy Engineering Re-Routes First-Cycle Redox for Stabilized Li-Rich Layered Cathodes

We demonstrate that atomic-scale surface disorder can control the first-cycle redox sequence of Li-rich layered oxides, eliminating the detrimental process of oxygen release and lattice collapse that degrades performance. In Li1.14Ni0.32Mn0.54O2 (LNMO), a simple chemical treatment introduces oxygen and transition metal (TM) vacancies confined to the particle surface while preserving the bulk layered framework. Multi-modal synchrotron analyses reveal that these vacancies trigger an early oxygen oxidation below 4.4 V, delay nickel oxidation to higher potential, and suppress the formation of covalent Ni4+─O states. This modified pathway prevents irreversible oxygen release, suppresses manganese dissolution, and maintains metal-oxygen coordination at high voltages. Consequently, the treated cathode delivers higher first-cycle Coulombic efficiency (CE), mitigated voltage fade, and superior capacity retention. By directly linking engineered surface disorder to redox reactions and associated structural transformations, this work establishes a general design principle for durable, high-energy-density cathodes.

Kang, Seongkoo↗
DOE OSTI2026

Memsensing by surface ion migration within Debye length

Integration between electronics and biology is often facilitated by iontronics, where ion migration in aqueous media governs sensing and memory. However, the Debye screening effect limits electric fields to the Debye length, the distance over which mobile ions screen electrostatic interactions, necessitating external voltages that constrain the operation speed and device design. Here we report a high-speed in-memory sensor based on vanadium dioxide (VO2) that operates without an external voltage by leveraging built-in electric fields within the Debye length. When VO2 contacts a low-work-function metal (for example, indium) in a salt solution, electrochemical reactions generate indium ions that migrate into the VO2 surface under the native electric field, inducing a surface insulator-to-metal phase transition of VO2. The VO2 conductance increase rate reflects the salt concentration, enabling in-memory sensing, or memsensing of the solution. The memsensor mimics Caenorhabditis elegans chemosensory plasticity to guide a miniature boat for adaptive chemotaxis, illustrating low-power aquatic neurorobotics with fewer memory units.

Guo, Ruihan↗
DOE OSTI2025

Tuning Cation (Dis)Order in Cr‐Based Li‐Excess Oxide Cathode Materials to Improve Li+ Transport Properties

Abstract Li‐excess disordered rocksalts (DRXs) hold promise as next‐generation cathodes for Li‐ion batteries due to their high capacity and energy density, along with the potential to eliminate the need for Co and Ni. However, due to their low Li + diffusivity, DRXs need to be pulverized into nanoparticles to achieve high performance. Herein, a new strategy for overcoming this limitation is demonstrated, involving the design of as‐synthesized partially disordered oxides with a structure that lies between ordered layered and fully disordered, exhibiting a varying degree of local (dis)order. This unique structure activates new Li + diffusion channels, improving percolation and transport properties. This strategy allows a large content of Li + to be accessed in material with large, micron‐sized particles through highly reversible Cr 3+/6+ and O redox, yielding a first discharge capacity of 286 mAh g −1 (881 Wh kg −1 ). The Li + percolation network is further improved by substituting Ti with a mixture of multiple metals, which appears to locally decrease the migration barrier through lattice distortion. Proper tuning of the chemical composition, especially the content of metals with empty d orbitals, is established as a crucial factor for controlling the degree of disorder and mitigating voltage fade and hysteresis growth upon cycling.

Moździerz, Maciej↗
DOE OSTI2025

Dual‐Gradient Construction on Li‐Rich Cathodes for High Stability Lithium Battery

Abstract The practical applications of high‐energy Li‐rich layered oxides (LLOs) have been hindered by the severe performance degradation including voltage decay and capacity fading. The gradient construction toward high‐activity interior and high‐stability exterior, typically realized by gradually changed transition metal (TM) gradient in LLOs, can alleviate the performance degradation to certain degrees. In this study, a gradient design of Al/Mg dopants is demonstrated for the TM‐gradient LLOs to further harmonize the high‐activity interior and high‐stability exterior, thereby forming the dual (TM and doping) gradient. As a result, superior capacity retention of 86% and a minor voltage decay of 0.54 mV cycle −1 are achieved at 1 C after 300 cycles. The improved electrochemical stability of the dual‐gradient LLO is attributed to the enhanced surface stability and suppressed bulk structure degeneration of LLOs upon electrochemical cycling. The dual‐gradient design serves as an important approach to fabricate high‐performance bulk LLOs toward applications.

Wu, Tianhao↗
DOE OSTI2025

Alternative Solid‐State Synthesis Route for Highly Fluorinated Disordered Rock‐Salt Cathode Materials for High‐Energy Lithium‐Ion Batteries

Abstract Fluorination has been identified as a key element for enabling the stable cycling of earth‐abundant manganese‐based disordered rock salt (DRX) cathodes. However, fluorination in the DRX bulk remains a challenge for scalable solid‐state synthesis. In this study, a tailored reaction pathway is proposed to synthesize a highly fluorinated DRX. It is demonstrated for the first time that the unconventional precursors, Li 6 MnO 4 , MnF 2 , and TiO 2 , can avoid the formation of Mn‐based intermediates (such as Li 2 (Mn,Ti)O 3, LiMnO 2 , and Mn 3 O 4 ), which, once formed, persist until the synthesis temperature reaches close to or above that required for fluorine volatility. Therefore, this method can form a highly fluorinated DRX with a composition of Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) at a low temperature (800 °C) relative to that required for conventional DRX solid‐state reactions (≥900 °C). Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) delivers a specific capacity above 300 mAh g −1 and a specific energy of 980 Wh kg −1 at 30 °C. Detailed characterization reveals that this DRX phase reversibly utilizes Mn 2+/3+ redox in the low‐voltage region and Mn 3+/4+ redox in the middle‐voltage range, whereas reversible oxygen redox is observed at high potentials.

Avvaru, Venkata Sai↗
DOE OSTI2025

Polarization-dependent resonant inelastic x-ray scattering of β-Ga2O3: An experimental and computational study

The bulk electronic structure of β-Ga2O3 single crystals was investigated using oxygen K-edge x-ray emission and absorption spectroscopy as well as resonant inelastic soft x-ray scattering. Spectra were obtained for different orientations of the crystal planes with respect to the polarization vector of the incident x-ray beam. The spectra are analyzed with calculations based on density functional theory and using the Bethe–Salpeter equation in the ocean code to take the core–hole interaction into account. These calculations correctly capture all the main features in the experimental spectra, demonstrating the potential of the approach to predict the electronic properties of similar compounds. We find a pronounced anisotropy as a function of the excitation polarization vector and significant differences in the spectral contributions from the inequivalent oxygen atoms of β-Ga2O3.

Pyatenko, Elizaveta↗
DOE OSTI2025

Characterizing Disorders Within Cathode Materials of Lithium‐Ion Batteries

The demand for developing high-energy density cathode materials has been increasing. The energy densities of cathode materials have been improved by adapting structural deviation from the ideal fully ordered α-NaFeO2 type, but that led to limitations in terms of structural stability and safety. Although disorders in cathode materials are closely related to their electrochemical properties, unfortunately, characterizing the disorder itself in cathode materials has been challenging due to its complex parasitic reaction and strong correlation with other disorders occurring during charge/discharge. In this review, we categorize various disorders by their scales of ordering from short-range to long-range. We addressed the principles of various characterization tools to figure out how they can help to identify the structural disorder in cathode materials. Specifically, we focused on the underlying principles of each characterization technique to correlate different disorder-driven phenomena through several case studies. It underscores the substantial importance of disorder-property relationships and the corresponding characterization methods, which can provide novel research strategies for developing high-energy density cathode materials with decent structural stability.

Lee, Hakwoo↗
DOE OSTI2025

Screening and Development of Sacrificial Cathode Additives for Lithium‐Ion Batteries

Abstract This work presents a computational screening approach to identify Li‐rich transition‐metal oxide sacrificial cathode additives and provides experimental validation of antifluorite‐structured Li 6 MnO 4 as a potential candidate. Initial attempts to synthesize this compound result in low purity (≤40% by weight) owing to close thermodynamic competition with Li 2 O and MnO at low temperature. However, it is shown that a much higher purity of 85% by weight can be achieved by combining Li excess with rapid cooling from high temperature, which effectively stabilizes the Li 6 MnO 4 phase. The synthesized product delivers a high irreversible Li release capacity that exceeds 700 mAh g −1 by utilizing combined Mn oxidation (Mn 2+/3+ and Mn 3+/4+ ) and O oxidation. These results demonstrate that Li 6 MnO 4 may therefore be useful as a potential sacrificial cathode additive in Li‐ion batteries and motivate further investigation of other structurally‐related compounds. While attempts were made to synthesize two additional compounds among computationally screened candidates, it was not successful to experimentally realize the two candidates. The difficulty of experimental realization of the newly predicted materials remains a challenge and it is suggested that more efforts need to be devoted to developing computational techniques to precisely predict synthesizability and propose potential synthetic routes of the predicted materials.

Kim, Haegyeom↗
DOE OSTI2025

Unveiling the Mechanism of Mn Dissolution Through a Dynamic Cathode‐Electrolyte Interphase on LiMn2O4

Abstract Understanding the formation and evolution of the cathode‐electrolyte interphase (CEI), which forms at the interface between the cathode and electrolyte, is crucial for revealing degradation mechanisms in cathode materials, especially for developing strategies to stabilize the interphase in the strongly oxidizing conditions that evolve at high operating voltages in next‐generation Li‐ion batteries. However, The present understanding of the CEI is challenged by its complex and dynamic nature. In this work, near‐edge X‐ray absorption fine structure spectroscopy, electrochemical characterization, and reactive molecular dynamics simulations are combined to reveal a mechanism for CEI formation and evolution above model LiMn 2 O 4 (LMO) thin‐film electrodes in contact with conventional carbonate‐based electrolytes. It is found that Mn dissolution from LMO can be understood in terms of repetitive Mn 3 O 4 formation and dissolution behavior during cycling, which is closely connected to electrolyte decomposition and a key aspect of the CEI formation and growth. The behavior of the CEI in this model system offers detailed insight into the dynamic chemistry of the interphase, underscoring the important role of electrolyte composition and cathode surface structure in interphase degradation.

Ou, Wenhan↗
DOE OSTI2025

Quantification of Oxygen Vacancies in SrFe0.5Cr0.5O3−δ Thin Films: Correlating Lattice Expansion with Oxidation State Variability

Oxygen vacancies (VO), even in the dilute regime, can significantly impact the physical and chemical properties of complex oxides. It is however challenging to reliably detect and adequately quantify such defects in thin film samples where the VO concentration and distribution may further vary in response to interfacial strain. Here, we present a method to quantify VO concentrations in SrFe0.5Cr0.5O3−δ (SFCO) epitaxial thin films. Through coherent Bragg rod analysis, X-ray absorption spectroscopy, and theoretical modeling, we systematically correlate the c-axis lattice expansion detected in SFCO films with a VO concentration gradient. Our results reveal a nearly linear relationship between oxygen off-stoichiometry and out-of-plane lattice expansion in coherently strained SFCO films, with δ increasing from 0.32 to 0.52 and the lattice expanding by ∼1.0%. Moreover, a significant decrease in Cr oxidation state (from Cr5+ to Cr3+) is observed as the VO concentration increases, while the Fe oxidation state remains fixed at Fe3+. Our findings provide a reliable way to quantify oxygen stoichiometry in complex oxides, offering a pathway to design materials with precisely tailored structure–property relationships.

Hossain, Mohammad Delower↗
DOE OSTI2025

Passivation and Degradation of Sulfur-Treated Silicon Surfaces for Photovoltaics

Sulfur-based passivation for silicon surfaces using H2S gas is an alternative passivation method to reduce the thermal budget for Si photovoltaics. To understand the impact of the high-quality passivation and an observed passivation efficiency decrease after air exposure, we have studied the chemical surface structure by X-ray photoelectron spectroscopy (XPS), X-ray Auger electron spectroscopy (XAES), and S and Si L2,3 X-ray emission spectroscopy (XES). On the S-passivated silicon surfaces, we find the formation of S–Si bonds, in addition to some Si–O bonds. Upon air exposure, sulfur partially desorbs from the Si surface and an increased presence of Si–O and S–O bonds is observed. We identify that well-defined S–Si bonds are crucial to maintain high-quality surface passivation for Si photovoltaics, which allows further optimization of the fabrication process for S-based passivation on silicon.

Hua, Amandee↗
DOE OSTI2024

Oxygen redox activities governing high-voltage charging reversibility of Ni-rich layered cathodes

A schematic illustration indicative of the improved structural reversibility through stabilizing oxidized oxygen by Al doping. The chemical reactions and phase transitions at high voltages are generally considered to determine the electrochemical properties of high-voltage layered cathodes such as Ni-rich rhombohedral oxides. Even if significantly higher SOCs (states-of-charge) are utilized above the capability of transition metal redox (primarily Ni and Co), the effect of oxygen redox on Ni-rich rhombohedral oxides still looks mysterious thereby necessitating research that can clarify the relationship between redox reactions and phase transitions. Here, we performed a comprehensive and comparative study of the cationic and anionic redox reactions, as well as the structural evolution of a series of commercial Ni-rich layered oxides with and without Al doping. We combined the results from X-ray spectroscopy, operando electrochemical mass spectrometry, and neutron diffraction with electrochemical properties and thereby revealed the different oxygen redox activities associated with structural and electrochemical degradations. We reveal that Al doping suppresses the irreversible oxygen release but enhances the lattice oxygen oxidization. With this modulated oxygen redox activity, the Ni-rich layered oxides’ notorious H2–H3 structural phase transition becomes highly reversible. Our findings disentangle the different oxygen redox activities during high-voltage cycling and clarify the role of dopants in the Ni-rich layered oxides in terms of structural and electrochemical stability, shedding light on the future direction of optimizing layered cathode materials for safer high energy-density secondary batteries.

Lee, Gi-Hyeok↗
DOE OSTI2024

Layer Resolved Cr Oxidation State Modulation in Epitaxial SrFe 0.67 Cr 0.33 O 3−δ Thin Films

Understanding how doping influences physicochemical properties of ABO 3 perovskite oxides is critical for tailoring their functionalities. In this study, SrFe 0.67 Cr 0.33 O 3−δ epitaxial thin films were used to examine the effects of Fe and Cr competition on structure and B-site cation oxidation states. The films exhibit a perovskite-like structure near the film/substrate interface, while a brownmillerite-like structure with horizontal oxygen vacancy channels predominates near the surface. Electron energy loss spectroscopy shows Fe remains Fe 3+ , while Cr varies from ∼Cr 3+ (tetrahedral layers) to ∼Cr 4+ (octahedral layers) within brownmillerite phases and becomes ∼Cr 4.5+ in perovskite-like phases. Theoretical simulations indicate that Cr–O bond arrangements and the way oxygen vacancies interact with Cr and Fe drive Cr charge disproportionation. High-valent Cr cations introduce additional densities of states near the Fermi level, reducing the optical bandgap from ∼2.0 eV (SrFeO 2.5 ) to ∼1.7 eV (SrFe 0.67 Cr 0.33 O 3−δ ). In conclusion, these findings offer insights into B-site cation doping in the perovskite oxide framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗