Engineering Papers⌕ Search

Engineering topics

Yang, Jian

Publications and source records attributed to Yang, Jian.

At least 37 records · Page 2

Effects of B{sub 2}O{sub 3} on Crystallization, Structure, and Heat Transfer of CaO-Al{sub 2}O{sub 3}-Based Mold Fluxes

The reaction between traditional CaO-SiO{sub 2}-based mold fluxes and high-Al steel inevitably changes flux composition, and, consequently, flux properties. This problem can be mitigated by using CaO-Al{sub 2}O{sub 3}-based mold fluxes. To maintain appropriate melting properties, CaO-Al{sub 2}O{sub 3}-based mold fluxes contain B{sub 2}O{sub 3}, which is an effective fluxing agent that decreases the liquidus temperature. In this article, the effects of B{sub 2}O{sub 3} on crystallization behavior, structure, and heat transfer of CaO-Al{sub 2}O{sub 3}-based mold fluxes were studied using single/double hot thermocouple technique, Raman spectroscopy, and infrared emitter technique. The increase of B{sub 2}O{sub 3} content from 7.6 to 13.1 mass pct suppressed the crystallization tendency of mold fluxes in continuous cooling experiments and isothermal experiments conducted over 1273 K (1000 °C). The isothermal crystallization below 1273 K (1000 °C) was also inhibited when B{sub 2}O{sub 3} content increased from 7.6 to 9.6 mass pct; but a further increase of B{sub 2}O{sub 3} content to 13.1 mass pct did not show a visible effect on the crystallization tendency. The increase of B{sub 2}O{sub 3} content from 9.6 to 13.1 mass pct improved the heat fluxes under an incident thermal radiation of 1.6 MW/m{sup 2}; however, the increase of B{sub 2}O{sub 3} content from 7.6 to 9.6 mass pct slightly decreased the heat transfer rate. Crystallization of fluxes and heat transfer were discussed in relation to flux structure.

36 MATERIALS SCIENCE↗

Piezoelectrically Tuned, Multimode Cavity Search for Axion Dark Matter

The eV axion is a well-motivated extension to the standard model. The Axion Dark Matter 27 eXperiment (ADMX) collaboration seeks to discover this particle by looking for the resonant con28 version of dark-matter axions to microwave photons in a strong magnetic eld. In this paper we 29 report results from an ADMX pathnder experiment, the ADMX \Sidecar", which is designed to 30 pave the way for future, higher mass, searches. The Sidecar experiment excludes masses in three 31 widely spaced frequency ranges (4202-4249 MHz, 5086-5799 MHz and 7173-7203 MHz), correspond32 ing to masses favored by some cosmic string simulations. In addition, Sidecar demonstrates the 33 successful use of piezoelectric actuators for both cavity tuning and antenna coupling. Finally, this publication is the rst to report data taken on both the TM010 and TM020 modes.

Boutan, Christian R.↗

Effect of MgO on Crystallization and Heat Transfer of Fluoride-Free Mold Fluxes

The effect of MgO on crystallization and heat transfer of fluoride-free mold fluxes was studied using single/double-hot thermocouple technique (SHTT/DHTT) and infrared emitter technique (IET), respectively. SHTT experiments demonstrated that the increase of MgO concentration promoted the crystallization tendency of mold fluxes. XRD analysis showed that the dominant phases changed from CaSiO{sub 3} to CaSiO{sub 3}/Ca{sub 2}MgSi{sub 2}O{sub 7}/Ca{sub 11}Si{sub 4}B{sub 2}O{sub 22}, and to Ca{sub 2}MgSi{sub 2}O{sub 7} as the MgO content was increased. The heat flux across mold flux disks was reduced from 671 to 615 kW/m{sup 2} in IET experiments when MgO concentration was increased from 0.9 to 4.9 mass pct.

36 MATERIALS SCIENCE↗

Long noncoding RNA LINC00165-induced by STAT3 exerts oncogenic properties via interaction with Polycomb Repressive Complex 2 to promote EMT in gastric cancer

Long non-coding RNAs (lncRNAs) are a crucial member of the non-coding RNA family, and increasing evidence demonstrates that lncRNAs participate in the initiation and progression of cancers. Our study aimed to explore the role of the lncRNA LINC00165 in gastric cancer (GC) development. In the present study, our results showed that LINC00165 was upregulated in GC tissues and cell lines and high expression of LINC00165 was correlated with tumor-node-metastasis stage, invasion depth, and overall survival of GC patients. Functional assays showed that LINC00165 knockdown inhibited the proliferation, migration and invasion of GC cells and LINC00165 overexpression stimulated their proliferation, migration and invasion. Online transcription factor binding site prediction analysis showed that there were STAT3 binding sites in the LINC00165 promoter region. Furthermore, luciferase reporter and chromatin immunoprecipitation assays provided evidence that STAT3 could bind directly to the region between −547 bp to −537 bp (ATGTTGGGAAA) of LINC00165 promoter and activate its transcription. Then GC cells were partitioned into nuclear and cytoplasmic fractions and we found that LINC00165 was localized preferentially to the nucleus. Mechanistically, we revealed that LINC00165 functioned as a scaffold for interaction with Polycomb Repressive Complex 2 to promote the epithelial-mesenchymal transition in GC cells. Taken together, our study revealed that LINC00165 was involved in the progression and poor prognosis of GC as an oncogenic role. Therefore, LINC00165 might become a new potential target for GC chemotherapy and further predict prognosis of patients.

60 APPLIED LIFE SCIENCES↗

Effect of Ce doping on the resistance of Na over V2O5-WO3/TiO2 SCR catalysts

Highlights: • Different forms of Na poisoning CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts were prepared by impregnation method. • The comparison of the poisoning effect between Na{sub 2}O and NaCl over Ce{sub 10}VWTi catalyst was studied. • The poisoning effect of Na{sub 2}O is lighter than that of NaCl because the 4Na{sub 2}O-Ce{sub 10}VWTi catalyst exists more acid sites. • The reasons contributing to the catalytic activity and Na poisoning resistance of CeVWTi catalyst were proposed. - Abstract: Enhanced performance of Ce doping on the catalytic activity of V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts and its resistance properties to Na poisoning have been investigated in the research. Different Na species (NaCl and Na{sub 2}O) were deposited on CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts by impregnation method. The results presented that CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts exhibited a higher NH{sub 3}-SCR activity and better Na resistance than the V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalyst, and its poisoning resistance to Na{sub 2}O is more superior than to NaCl, caused by more acid sites over the 10%CeO{sub 2}-V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} (Ce{sub 10}VWTi) catalyst, which indicated that the poisoning resistance of Na{sub 2}O on Ce{sub 10}VWTi catalysts is higher than that of NaCl. Combined with the characterization results, the dopant of Ce could enhance the surface chemisorbed oxygen on the Na poisoning V{sub 2}O{sub 5}-WO{sub 3}/TiO{sub 2} catalysts, facilitate the redox cycle, and increase the intensity of acid sites due to the newly formed Brønsted acid sites stemmed from Ce{sup 3+}−NH{sub 4}{sup +}, thereby promoting catalytic activity and Na poisoning resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

FeN 4 Sites Embedded into Carbon Nanofiber Integrated with Electrochemically Exfoliated Graphene for Oxygen Evolution in Acidic Medium

Abstract Development of inexpensive and efficient oxygen evolution reaction (OER) catalysts in acidic environment is very challenging, but it is important for practical proton exchange membrane water electrolyzers. A molecular iron–nitrogen coordinated carbon nanofiber is developed, which is supported on an electrochemically exfoliated graphene (FeN 4 /NF/EG) electrocatalyst through carbonizing the precursor composed of iron ions absorbed on polyaniline‐electrodeposited EG. Benefitting from the unique 3D structure, the FeN 4 /NF/EG hybrid exhibits a low overpotential of ≈294 mV at 10 mA cm −2 for the OER in acidic electrolyte, which is much lower than that of commercial Ir/C catalysts (320 mV) as well as all previously reported acid transitional metal‐derived OER electrocatalysts. X‐ray absorption spectroscopy coupled with a designed poisoning experiment reveals that the molecular FeN 4 species are identified as active centers for the OER in acid. The first‐principles‐based calculations verify that the FeN 4 –doped carbon structure is capable of reducing the potential barriers and boosting the electrocatalytic OER activity in acid.

Lei, Chaojun↗

Neuroligin-3 protects retinal cells from H2O2-induced cell death via activation of Nrf2 signaling

Highlights: • NLGN3 protects retinal pigment epithelium (RPE) cells and retinal ganglion cells (RGCs) from H{sub 2}O{sub 2}. • NLGN3 inhibits H{sub 2}O{sub 2}-induced ROS production, lipid peroxidation and DNA damage in retinal cells. • NLGN3 efficiently activates Nrf2 signaling in human RPE cells and RGCs. • Nrf2 silencing abolishes NLGN3-induced anti-H{sub 2}O{sub 2} actions in human retinal cells. Intensified oxidative stress can cause severe damage to human retinal pigment epithelium (RPE) cells and retinal ganglion cells (RGCs). The potential effect of neuroligin-3 (NLGN3) against the process is studied here. Our results show that NLGN3 efficiently inhibited hydrogen peroxide (H{sub 2}O{sub 2})-induced death and apoptosis in human RPE cells and RGCs. H{sub 2}O{sub 2}-induced reactive oxygen species (ROS) production, lipid peroxidation and DNA damage in retinal cells were alleviated by NLGN3. NLGN3 activated nuclear-factor-E2-related factor 2 (Nrf2) signaling, enabling Nrf2 protein stabilization, nuclear translocation and expression of key anti-oxidant enzymes (HO1, NOQ1 and GCLC) in RPE cells and RGCs. Further results demonstrate that NLGN3 activated Akt-mTORC1 signaling in retinal cells. Conversely, Akt-mTORC1 inhibitors (RAD001 and LY294002) reduced NLGN3-induced HO1, NOQ1 and GCLC mRNA expression. Significantly, Nrf2 silencing by targeted shRNAs reversed NLGN3-induced retinal cytoprotection against H{sub 2}O{sub 2}. We conclude that NLGN3 activates Nrf2 signaling to protect human retinal cells from H{sub 2}O{sub 2}. NLGN3 could be further tested as a valuable retinal protection agent.

60 APPLIED LIFE SCIENCES↗

NbFeSb based half-heusler thermoelectric materials and methods of fabrication and use

A thermoelectric half-Heusler material comprising niobium (Nb), iron (Fe) and antimony (Sb) wherein the material comprises grains having a mean grain size less than one micron. A method of making a nanocomposite half-Heusler thermoelectric material includes melting constituent elements of the thermoelectric material to form an alloy of the thermoelectric material, comminuting (e.g., ball milling) the alloy of the thermoelectric material into nanometer scale mean size particles, and consolidating the nanometer size particles to form the half-Heusler thermoelectric material comprising at least niobium (Nb), iron (Fe) and antimony (Sb) and having grains with a mean grain size less than one micron.

Joshi, Giri↗

Interfacial structure and properties of Cu/Al joints brazed with Zn-Al filler metals

Highlights: • The formation mechanism of Cu side interfacial compounds of Cu/Al joints with Zn-Al filler metals are revealed accurately. • The Cu side interfacial structure is uncertain and dependent on brazing parameters, especially cooling rate after brazing. • The close relation among composition, brazing parameters, interfacial structure and mechanical properties is discovered. - Abstract: Seeing that opinions vary, no unanimous conclusion has been drawn on Cu side interfacial structure and its relationship with the mechanical properties of Cu/Al joints brazed with Zn-Al filler metals, XRD, SEM and HAADF-STEM were used to accurately reveal the Cu side interfacial structure and the mechanism concerned. The relationship among the brazing process, interfacial structure and mechanical properties of the joints was systematically studied. The following phenomena and principles were newly found and clarified. The Cu side interfacial structure are uncertain and dependent on brazing parameters, especially cooling rate after brazing, in addition to the composition of Zn-Al filler metal. High cooling rate promotes the formation of CuZn and Al{sub 4.2}Cu{sub 3.2}Zn{sub 0.7} compounds, while slow cooling rate is beneficial for the formation of Cu-Al interfacial compounds at the Cu side interface. Increasing brazing temperature or lengthening holding time enhances the dissolution of base metals, which results in the increase of Al and Cu contents at the Cu side interface, thus promoting the formation of CuAl{sub 2} compound. Besides, increasing Al content in Zn-Al filler metal also promotes the formation of CuAl{sub 2} compound by directly increasing Al content at the Cu side interface. The significant differences in joint strength are caused by the differences of Cu side interfacial compounds essentially. When the thin CuZn and Al{sub 4.2}Cu{sub 3.2}Zn{sub 0.7} layers exist at the Cu side interface, the brazed joint possesses high shear strength. On the contrary, the formation of Cu-Al compound layers at the Cu side interface, especially CuAl{sub 2}, will severely degrade the joint strength.

36 MATERIALS SCIENCE↗

Screen printing large-area organometal halide perovskite thin films for efficient photodetectors

Highlights: • A stable paste with perovskite precursor was produced out. • Screen printing was proposed to fabricate perovskite thin films. • The perovskite photodetectors with symmetric architectures show reasonable performance with high photocurrent and fast response. - Abstract: Organometal halide perovskites have demonstrated excellent features compared to conventional optoelectronic materials. To date, the perovskite films have generally been fabricated by either spin coating or vapor deposition. However, both methods cannot simultaneously meet large scale and low cost of production. Here, a simple, low-cost and high-throughput strategy was proposed to fabricate perovskite thin films, which were further applied in photodetectors. First, lead compound nanoparticles were synthesized by a solvent precipitation method, then a paste with the lead compound nanoparticles was screen printed to form PbO films involving calcination, and next the PbO films directly reacted with CH{sub 3}NH{sub 3}I solution to convert into CH{sub 3}NH{sub 3}PbI{sub 3} films. The CH{sub 3}NH{sub 3}PbI{sub 3} films consisted of micron crystals, whose sizes can be effectively controlled by adjusting CH{sub 3}NH{sub 3}I concentration. Furthermore, the CH{sub 3}NH{sub 3}PbI{sub 3} films were applied in photodetectors, which showed good performance with high sensitivity and fast response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrothermal Synthesis of Nitrogen-Doped Carbon Quantum Dots as Fluorescent Probes for the Detection of Dopamine

Nitrogen-doped carbon quantum dots (N-CQDs) were synthesized though a facile, economical and straightforward hydrothermal method by using polyacrylamide as both carbon and nitrogen sources. The as-prepared N-CQDs offered high quantum yield of 23.1%, exhibited good water solubility and fluorescence properties. Moreover, the N-CQDs can be used as effective probes for sensitive and selective detection of dopamine. Fluorescence of N-CQDs was effectively quenched after the addition of dopamine owing to dopamine would be transformed into dopamine-quinone under alkaline conditions. A good linear relationship between fluorescence quenching and the concentration of dopamine in the range 0.1–200 μM was obtained with a low detection limit of 0.05 μM. The proposed method showed high selectivity for dopamine in the presence of potential interfering species. Moreover, this method was successfully applied to the determination of DA in urine sample with satisfactory recoveries.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Structural basis of dual Ca2+/pH regulation of the endolysosomal TRPML1 channel

The activities of organellar ion channels are often regulated by Ca2+ and H+, which are present in high concentrations in many organelles. Here we report a structural element critical for dual Ca2+/pH regulation of TRPML1, a Ca2+-release channel crucial for endolysosomal function. TRPML1 mutations cause mucolipidosis type IV (MLIV), a severe lysosomal storage disorder characterized by neurodegeneration, mental retardation and blindness. We obtained crystal structures of the 213-residue luminal domain of human TRPML1 containing three missense MLIV-causing mutations. This domain forms a tetramer with a highly electronegative central pore formed by a novel luminal pore loop. Cysteine cross-linking and cryo-EM analyses confirmed that this architecture occurs in the full-length channel. Structure–function studies demonstrated that Ca2+ and H+ interact with the luminal pore and exert physiologically important regulation. The MLIV-causing mutations disrupt the luminal-domain structure and cause TRPML1 mislocalization. Our study reveals the structural underpinnings of TRPML1's regulation, assembly and pathogenesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rapid Assessment of Particle Hygroscopic Growth (Final Report)

This is a Phase I feasibility study to evaluate the accuracy and the speed for measuring particle hygroscopic growth using the water-based aerosol mobility imaging system already developed between Aerosol Dynamics Inc. and Brookhaven National Laboratory (BNL). One of the key parameters determining the impact of atmospheric aerosols on global climate is aerosol hygroscopicity, or uptake of water as a function of relative humidity. To date there is no rapid means of making this measurement over the range of particle sizes and humidity values of importance. This project aims to fill this need.

54 ENVIRONMENTAL SCIENCES↗