Engineering Papers⌕ Search

Engineering topics

Yang, Jian

Publications and source records attributed to Yang, Jian.

At least 55 records · Page 3

Solar wind compressible turbulence near proton scales: Cluster observations

The solar wind compressible turbulence attracts more attention recently due to its possible role in plasma heating. Using the plasma density and magnetic field measured simultaneously by the Cluster C1 probe, we statistically investigate the wave characteristics of the proton-scale compressible turbulence. In most cases, the density and magnetic field strength fluctuations almost show no positive correlation, suggesting the absence of fast mode waves. Moreover, the magnetic compressibility C{sub b} as measured by the level of magnetic fluctuations parallel to the background field, is enhanced continuously around proton scales and is consistent with kinetic Alfvén wave (KAW) prediction. Interestingly, kinetic slow mode waves (KSW) are identified in a few cases through large values of C{sub b} and plasma compressibility C{sub p}, together with the the anti-correlation between n and B. We suggest that both KAW and KSW can account for the compressible fluctuations energy, while their relative proportions under certain plasma condition require further studies.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Preparation of Single-Layer MoS 2x Se 2(1-x) and Mo x W 1-x S 2 Nanosheets with High-Concentration Metallic 1T Phase

The high-yield and scalable production of single-layer ternary transition metal dichalcogenide nanosheets with ≈66% of metallic 1T phase, including MoS 2x Se 2(1-x) and Mo x W 1-x S 2 is here achieved via electrochemical Li-intercalation and the exfoliation method. Thin film MoS 2x Se 2(1-x) nanosheets drop-cast on a fluorine-doped tin oxide substrate are used as an efficient electrocatalyst on the counter electrode for the tri-iodide reduction in a dye-sensitized solar cell.

14 SOLAR ENERGY↗

Two-Dimensional Nb-Based M 4 C 3 Solid Solutions (MXenes)

Two new two-dimensional Nb 4 C 3 -based solid solutions (MXenes), (Nb 0.8 ,Ti 0.2 ) 4 C 3 T x and (Nb 0.8 ,Zr 0.2 ) 4 C 3 T x (where T is a surface termination) were synthesizedas confirmed by X-ray diffractionfrom their corresponding MAX phase precursors (Nb 0.8 ,Ti 0.2 ) 4 AlC 3 and (Nb 0.8 ,Zr 0.2 ) 4 AlC 3 . In our report we discuss Zr-containing MXene. We also studied intercalation of Li ions into these two compositions, and Nb 4 C 3 T x in order to determine the potential of those materials for energy storage applications. Lithiation and delithiation peaks at 2.26 and 2.35 V, respectively, appeared in the case of Nb 4 C 3 T x , but were not present in Nb 2 CT x . After 20 cycles at a rate of C/4, the specific capacities of (Nb 0.8 ,Ti 0.2 ) 4 C 3 T x and (Nb 0.8 ,Ti 0.2 ) 4 C 3 T x were 158 and 132 mAh/g, respectively, both slightly lower than the capacity of Nb 4 C 3 T x .

36 MATERIALS SCIENCE↗

Thermal model development and validation for rapid filling of high pressure hydrogen tanks

This paper describes the development of thermal models for the filling of high pressure hydrogen tanks with experimental validation. Two models are presented; the first uses a one-dimensional, transient, network flow analysis code developed at Sandia National Labs, and the second uses the commercially available CFD analysis tool Fluent. These models were developed to help assess the safety of Type IV high pressure hydrogen tanks during the filling process. The primary concern for these tanks is due to the increased susceptibility to fatigue failure of the liner caused by the fill process. Thus, a thorough understanding of temperature changes of the hydrogen gas and the heat transfer to the tank walls is essential. The effects of initial pressure, filling time, and fill procedure were investigated to quantify the temperature change and verify the accuracy of the models. In this paper we show that the predictions of mass averaged gas temperature for the one and three-dimensional models compare well with the experiment and both can be used to make predictions for final mass delivery. Furthermore, due to buoyancy and other three-dimensional effects, however, the maximum wall temperature cannot be predicted using one-dimensional tools alone which means that a three-dimensional analysis is required for a safety assessment of the system.

42 ENGINEERING↗

Stronger activation of SREBP-1a by nucleus-localized HBx

We previously showed that hepatitis B virus (HBV) X protein activates the sterol regulatory element-binding protein-1a (SREBP-1a). Here we examined the role of nuclear localization of HBx in this process. In comparison to the wild-type and cytoplasmic HBx, nuclear HBx had stronger effects on SREBP-1a and fatty acid synthase transcription activation, intracellular lipid accumulation and cell proliferation. Furthermore, nuclear HBx could activate HBV enhancer I/X promoter and was more effective on up-regulating HBV mRNA level in the context of HBV replication than the wild-type HBx, while the cytoplasmic HBx had no effect. Our results demonstrate the functional significance of the nucleus-localized HBx in regulating host lipogenic pathway and HBV replication. - Highlights: • Nuclear HBx is more effective on activating SREBP-1a and FASN transcription. • Nuclear HBx is more effective on enhancing intracellular lipid accumulation. • Nuclear HBx is more effective on enhancing cell proliferation. • Nuclear HBx up-regulates HBV enhancer I/X promoter activity. • Nuclear HBx increases HBV mRNA level in the context of HBV replication.

60 APPLIED LIFE SCIENCES↗

Line broadening interference for high-resolution nuclear magnetic resonance spectra under inhomogeneous magnetic fields

Nuclear magnetic resonance spectroscopy serves as an important tool for analyzing chemicals and biological metabolites. However, its performance is subject to the magnetic-field homogeneity. Under inhomogeneous fields, peaks are broadened to overlap each other, introducing difficulties for assignments. Here, we propose a method termed as line broadening interference (LBI) to provide high-resolution information under inhomogeneous magnetic fields by employing certain gradients in the indirect dimension to interfere the magnetic-field inhomogeneity. The conventional spectral-line broadening is thus interfered to be non-diagonal, avoiding the overlapping among adjacent resonances. Furthermore, an inhomogeneity correction algorithm is developed based on pattern recognition to recover the high-resolution information from LBI spectra. Theoretical deductions are performed to offer systematic and detailed analyses on the proposed method. Moreover, experiments are conducted to prove the feasibility of the proposed method for yielding high-resolution spectra in inhomogeneous magnetic fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Entropic depletion in colloidal suspensions and polymer liquids: Role of nanoparticle surface topography

Here, we employ a hybrid Monte Carlo plus integral equation theory approach to study how dense fluids of small nanoparticles or polymer chains mediate entropic depletion interactions between topographically rough particles where all interaction potentials are hard core repulsion. The corrugated particle surfaces are composed of densely packed beads which present variable degrees of controlled topographic roughness and free volume associated with their geometric crevices. This pure entropy problem is characterized by competing ideal translational and (favorable and unfavorable) excess entropic contributions. Surface roughness generically reduces particle depletion aggregation relative to the smooth hard sphere case. However, the competition between ideal and excess packing entropy effects in the bulk, near the particle surface and in the crevices, results in a non-monotonic variation of the particle-monomer packing correlation function as a function of the two dimensionless length scale ratios that quantify the effective surface roughness. As a result, the inter-particle potential of mean force (PMF), second virial coefficient, and spinodal miscibility volume fraction vary non-monotonically with the surface bead to monomer diameter and particle core to surface bead diameter ratios. A miscibility window is predicted corresponding to an optimum degree of surface roughness that completely destroys depletion attraction resulting in a repulsive PMF. Variation of the (dense) matrix packing fraction can enhance or suppress particle miscibility depending upon the amount of surface roughness. Connecting the monomers into polymer chains destabilizes the system via enhanced contact depletion attraction, but the non-monotonic variations with surface roughness metrics persist.

36 MATERIALS SCIENCE↗

Photon-photon interaction in strong-coupling cavity-atom system

We study photon-photon interactions mediated by a cavity-atom system in the strongcoupling regime of cavity quantum electrodynamics (QED). Different temporal shapes of the incident photons have been explored via numerical calculations. Especially, time-reversed photons can be in the cavity simultaneously and potentially acquire strong interaction with each other, advancing quantum information applications, e.g., quantum non-demolition (QND) measurement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermoelectric Skutterudite Compositions and Methods for Producing the Same

Compositions related to skutterudite-based thermoelectric materials are disclosed. Such compositions can result in materials that have enhanced ZT values relative to one or more bulk materials from which the compositions are derived. Thermoelectric materials such as n-type and p-type skutterudites with high thermoelectric figures-of-merit can include materials with filler atoms and/or materials formed by compacting particles (e.g., nanoparticles) into a material with a plurality of grains each having a portion having a skutterudite-based structure. Methods of forming thermoelectric skutterudites, which can include the use of hot press processes to consolidate particles, are also disclosed. The particles to be consolidated can be derived from (e.g., grinded from), skutterudite-based bulk materials, elemental materials, other non-Skutterudite-based materials, or combinations of such materials.

Ren, Zhifeng↗

Thermoelectric skutterudite compositions and methods for producing the same

Compositions related to skutterudite-based thermoelectric materials are disclosed. Such compositions can result in materials that have enhanced ZT values relative to one or more bulk materials from which the compositions are derived. Thermoelectric materials such as n-type and p-type skutterudites with high thermoelectric figures-of-merit can include materials with filler atoms and/or materials formed by compacting particles (e.g., nanoparticles) into a material with a plurality of grains each having a portion having a skutterudite-based structure. Methods of forming thermoelectric skutterudites, which can include the use of hot press processes to consolidate particles, are also disclosed. The particles to be consolidated can be derived from (e.g., grinded from), skutterudite-based bulk materials, elemental materials, other non-Skutterudite-based materials, or combinations of such materials.

36 MATERIALS SCIENCE↗

The effects of deep level traps on the electrical properties of semi-insulating CdZnTe

Deep level traps have considerable effects on the electrical properties and radiation detection performance of high resistivity CdZnTe. A deep-trap model for high resistivity CdZnTe was proposed in this paper. The high resistivity mechanism and the electrical properties were analyzed based on this model. High resistivity CdZnTe with high trap ionization energy E{sub t} can withstand high bias voltages. The leakage current is dependent on both the deep traps and the shallow impurities. The performance of a CdZnTe radiation detector will deteriorate at low temperatures, and the way in which sub-bandgap light excitation could improve the low temperature performance can be explained using the deep trap model.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

HMGB1 induces an inflammatory response in endothelial cells via the RAGE-dependent endoplasmic reticulum stress pathway

Highlights: •Mechanisms of inflammatory response induced by HMGB1 are incompletely understood. •We found that endoplasmic reticulum stress mediate the inflammatory response induced by HMGB1. •RAGE-mediated ERS pathways are involved in those processes. •We reported a new mechanism for HMGB1 induced inflammatory response. -- Abstract: The high mobility group 1B protein (HMGB1) mediates chronic inflammatory responses in endothelial cells, which play a critical role in atherosclerosis. However, the underlying mechanism is unknown. The goal of our study was to identify the effects of HMGB1 on the RAGE-induced inflammatory response in endothelial cells and test the possible involvement of the endoplasmic reticulum stress pathway. Our results showed that incubation of endothelial cells with HMGB1 (0.01–1 μg/ml) for 24 h induced a dose-dependent activation of endoplasmic reticulum stress transducers, as assessed by PERK and IRE1 protein expression. Moreover, HMGB1 also promoted nuclear translocation of ATF6. HMGB1-mediated ICAM-1 and P-selectin production was dramatically suppressed by PERK siRNA or IRE1 siRNA. However, non-targeting siRNA had no such effects. HMGB1-induced increases in ICAM-1 and P-selectin expression were also inhibited by a specific eIF2α inhibitor (salubrinal) and a specific JNK inhibitor (SP600125). Importantly, a blocking antibody specifically targeted against RAGE (anti-RAGE antibody) decreased ICAM-1, P-selectin and endoplasmic reticulum stress molecule (PERK, eIF2α, IRE1 and JNK) protein expression levels. Collectively, these novel findings suggest that HMGB1 promotes an inflammatory response by inducing the expression of ICAM-1 and P-selectin via RAGE-mediated stimulation of the endoplasmic reticulum stress pathway.

60 APPLIED LIFE SCIENCES↗

Additive-assisted synthesis of boride, carbide, and nitride micro/nanocrystals

General and simple methods for the syntheses of borides, carbides and nitrides are highly desirable, since those materials have unique physical properties and promising applications. Here, a series of boride (TiB{sub 2}, ZrB{sub 2}, NbB{sub 2}, CeB{sub 6}, PrB{sub 6}, SmB{sub 6}, EuB{sub 6}, LaB{sub 6}), carbide (SiC, TiC, NbC, WC) and nitride (TiN, BN, AlN, MgSiN{sub 2}, VN) micro/nanocrystals were prepared from related oxides and amorphous boron/active carbon/NaN{sub 3} with the assistance of metallic Na and elemental S. In-situ temperature monitoring showed that the reaction temperature could increase quickly to {approx}850 Degree-Sign C, once the autoclave was heated to 100 Degree-Sign C. Such a rapid temperature increase was attributed to the intense exothermic reaction between Na and S, which assisted the formation of borides, carbides and nitrides. The as-obtained products were characterized by XRD, SEM, TEM, and HRTEM techniques. Results in this report will greatly benefit the future extension of this approach to other compounds. - Graphical abstract: An additive-assisted approach is successfully developed for the syntheses of borides, carbides and nitrides micro/nanocrystals with the assistance of the exothermic reaction between Na and S. Highlights: Black-Right-Pointing-Pointer An additive-assisted synthesis strategy is developed for a number of borides, carbides and nitrides. Black-Right-Pointing-Pointer The reaction mechanism is demonstrated by the case of SiC nanowires. Black-Right-Pointing-Pointer The formation of SiC nanowires is initiated by the exothermic reaction of Na and S.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Skutterudite Unicouple Characterization for Energy Harvesting Applications

Skutterudites are enticing thermoelectric materials due to their high figure of merit, ZT, and good thermomechanical properties. Our work reports the effective figure of merit, ZT eff , and the efficiency of skutterudite legs and a unicouple working under a large temperature difference. The p- and n-type legs are fabricated with electrodes sintered directly to the skutterudite during a hot pressing process. CoSi 2 is used as the electrode for the n-type skutterudite (Yb 0.35 Co 4 Sb 12 ) and Co2Si for the p-type skutterudite (NdFe 3.5 Co 0.5 Sb 12 ). A technique is developed to measure the ZT eff of individual legs and the efficiency of a unicouple. An ZT eff of 0.74 is determined for the n-type legs operating between 52 and 595 °C, and an ZT eff of 0.51 for the p-type legs operating between 77 and 600 °C. The efficiency of the p–n unicouple is determined to be 9.1% operating between ~70 and 550 °C.

30 DIRECT ENERGY CONVERSION↗