Engineering Papers⌕ Search

Engineering topics

Wang, Y

Publications and source records attributed to Wang, Y.

At least 199 records · Page 11

Recent developments in microtomography at GeoSoilEnviroCARS

A facility for x-ray computed microtomography (CMT) is operating as a national user facility for earth and environmental sciences research on the bending magnet beamline at the GeoSoilEnviroCARS sector at the Advanced Photon Source (APS). The APS bending magnet has a critical energy of 20 keV, and thus provides high flux at photon energies up to 100 keV, making it well suited to imaging a wide range of earth materials up to several cm in size. The beamline is equipped with a Si (111) double-crystal monochromator covering the energy range from 5 to 70 keV with beam sizes up to 50mm wide and 6mm high. The transmitted x-rays are imaged with a single crystal YAG or CdWO{sub 4} scintillator, a microscope objective and a 1300 x 1030 pixel 12-bit 5MHz CCD detector. The maximum spatial resolution is under 1.5 {micro}m in both the transmission radiographs and the reconstructed slices. Data collection times for full 3-D datasets range from 5-60 minutes. This facility has been used for a wide range of studies, including multiphase fluids in porous media, high-pressure studies, meteorites, and hyper-accumulating plants. We present recent technical improvements in the system, which include improved optics for samples larger than 5mm, significant reduction of ring artifacts, and correction of mechanical errors in the rotation stage.

43 PARTICLE ACCELERATORS↗

SciDAC advances in beam dynamics simulation: from light sources to colliders

In this paper, we report on progress that has been made in beam dynamics simulation, from light sources to colliders, during the first year of the SciDAC-2 accelerator project 'Community Petascale Project for Accelerator Science and Simulation (ComPASS).' Several parallel computational tools for beam dynamics simulation are described. Also presented are number of applications in current and future accelerator facilities (e.g., LCLS, RHIC, Tevatron, LHC, and ELIC).

Qiang, J↗

Combustion characteristics and kinetics of partial gasified coal char

Combustion characteristics and kinetics of partial gasified coal char (PGC-char) were investigated in this article. Two-stage distributed activation energy model (TS-DAEM) and simple model were used to model the combustion kinetics. The experimental results showed that the combustion characteristics of PGC-chars varied with coal types and percentage of gasification. Modeling results showed that TS-DAEM could suitably describe the combustion of PGC-char. The activation energy and pre-exponential factor increased with the increasing of PGC-char gasification percentage, but the percent of high reactivity part decreased. This indicated that the difficulty reactive part in the partial gasified coal char became more and more with the gasification conversion. However, simple model wasn't fit to describe the combustion of PGC-char, especially for PGC-chars with obvious second peak in combustion DTG curves.

01 COAL, LIGNITE, AND PEAT↗

SciDAC advances in beam dynamics simulation: from light sources to colliders

In this paper, we report on progress that has been made in beam dynamics simulation, from light sources to colliders, during the first year of SciDAC-II accelerator project,"Community Petascale Project for Accelerator Science and Simulation (ComPASS)." Several parallel computational tools for beam dynamics simulation will be described. A number of applications in current and future accelerator facilities, e.g., LCLS, RHIC, Tevatron, LHC, ELIC, are presented.

43 PARTICLE ACCELERATORS↗

Intermixing of InGaAs/GaAs Quantum Well Using Multiple Cycles Annealing Cu-doped SiO2

The authors investigate the effect of intermixing in InGaAs/GaAs quantum well structure using Cu-doped SiO{sub 2}. The incorporation of Cu into the silica film yields larger bandgap shift than typical impurity-free vacancy diffusion (IFVD) method at a lower activation temperature. We also observe enhancement of the photoluminescence (PL) signal from the intermixed InGaAs/GaAs quantum well structure after being cycle-annealed at 850 C.

36 MATERIALS SCIENCE↗

Quasiparticle density of states of 2H-NbSe{sub 2} single crystals revealed by low-temperature specific heat measurements according to a two-component model.

Low-temperature specific heat in a dichalcogenide superconductor 2H-NbSe{sub 2} is measured in various magnetic fields. It is found that the specific heat can be described very well by a simple model concerning two components corresponding to vortex normal core and ambient superconducting region, separately. For calculating the specific heat outside the vortex core region, we use the Bardeen-Cooper-Schrieffer (BCS) formalism under the assumption of a narrow distribution of the superconducting gaps. The field-dependent vortex core size in the mixed state of 2H-NbSe{sub 2}, determined by using this model, can explain the nonlinear field dependence of specific heat coefficient {gamma}(H), which is in good agreement with the previous experimental results and more formal calculations. With the high-temperature specific heat data, we can find that, in the multi-band superconductor 2H-NbSe{sub 2}, the recovered density of states (or Fermi surface) below T{sub c} under a magnetic field seems not to be gapped again by the charge density wave (CDW) gap, which suggests that the superconducting gap and the CDW gap may open on different Fermi surface sheets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Real-time studies of gallium adsorption and desorption kinetics on sapphire (0001) by grazing incidence small-angle x-ray scattering and x-ray fluorescence

Gallium adsorption and desorption on c-plane sapphire has been studied by real-time grazing incidence small-angle x-ray scattering and x-ray fluorescence as a function of substrate temperature (680-740 deg. C) and Ga flux. The x-ray techniques monitor the surface morphology evolution and amount of Ga on the surface. During deposition, nanodroplets of liquid Ga are observed to form on the surface and coarsen. The growth of droplet size during continuous deposition follows dynamical scaling, in agreement with expectations from theory and simulations which include deposition-induced droplet coalescence. However, observation of continued droplet distance scale coarsening during desorption points to the necessity of including further physical processes in the modeling. The desorption rate at different substrate temperatures gives the activation energy of Ga desorption as 2.7 eV, comparable to measured activation energies for desorption from Ga droplets on other substrates and to the Ga heat of vaporization.

36 MATERIALS SCIENCE↗

Ultrafast x-ray study of dense-liquid-jet flow dynamics using structure tracking velocimetry.

High-speed liquid jets and sprays are complex multiphase flow phenomena with many important industrial applications. Great efforts have been devoted to understand their dynamics since the pioneering work of Rayleigh on low-speed jets. Attempts to use conventional laser optical techniques to provide information about the internal structure of high-speed jets have been unsuccessful owing to the multiple scattering by droplets and interfaces, and the high density of the jet near the nozzle exit. Focused-X-ray-beam absorption measurements could provide only average quantitative density distributions using repeated imaging. Here, we report a novel approach on the basis of ultrafast synchrotron-X-ray full-field phase-contrast imaging. As illustrated in our case study, this technique reveals, for the first time, instantaneous velocity and internal structure of optically dense sprays with a combined unprecedented spatial and time resolution. This technique has tremendous potential for the study of transient phenomenon dynamics.

42 ENGINEERING↗

Ultrafast x-ray phase-contrast imaging of the initial coalescence phase of two water droplets.

We report an ultrafast x-ray phase-contrast imaging study of the early merging dynamics of two water drops in air. Owing to the edge-enhancement capability, the high penetrability, and the unprecedented temporal and spatial resolutions offered by this new x-ray technique, the coalescence singularity of two water drops was revisited. A finite initial contact radius was identified and the evolvement of the trapped toroidal air bubble was studied for the first time. Despite the existence of this finite initial contact radius, the subsequent meniscus radius followed power laws which agree with theoretical predictions for the inviscid regime.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel Fe-Ni Nanoparticle Catalyst for the Production of CO- and CO2-free H2

A novel nanoparticle impregnation method was used to prepare an Fe-Ni nanoparticle (np) catalyst supported on Mg(Al)O for the production of CO- and CO2-free H2 and carbon nanotubes (CNT) by non-oxidative dehydrogenation of methane. This novel catalyst and a catalyst of similar composition prepared by incipient wetness (IW) were evaluated for their catalytic performance and their structures were determined by several microscopic and spectroscopic techniques. Monosized Fe0.65-Ni0.35 oxide nanoparticles with an average particle size of 9 nm were prepared by thermal decomposition of an Fe-Ni oleate-surfactant complex in octadecene under reflux; these nanoparticles were dispersed onto a Mg(Al)O support to form a supported Fe-Ni np/Mg(Al)O catalyst. Compared with the Fe-Ni IW/Mg(Al)O catalyst, the nanoparticle catalyst was more easily reduced at a lower temperature (600 C in H2) and exhibited enhanced methane dehydrogenation and longer life-times at both 600 and 650 C. Each reduced Fe-Ni nanoparticle functioned as an active site for the growth of CNT. The CNT were in the form of multi-walled nanotubes (MWNT) of relatively uniform diameter. An invar-like Fe-Ni-C alloy phase is believed to be the active phase for methane dehydrogenation. The deactivation of the nanoparticle catalyst is principally due to encapsulation of catalyst particles by the CNT.

03 NATURAL GAS↗

Microscale Laser Peen Forming of Single Crystal

As the result of quickly increased requirement in many industrial products resulting from microtechnology, laser thermal microforming and microsurface treatment [microscale laser shock peening (?LSP)] have been well studied. By combining the beneficial effects of these two processes with a controlled bending deformation, microscale laser peen forming (?LPF) attracts more attention recently since it not only improves the fatigue life of the material but also shapes microscale metallic parts at the same time. In the present study, ?LSP of single crystal aluminum was presented to study anisotropic material response. Local plastic deformation was characterized by lattice rotation measured through electron backscatter diffraction. Residual stress distributions of both sides of a peened sample, characterized by x-ray microdiffraction, were compared with the results obtained from finite element method simulation. ?LPF anisotropic behavior was investigated in three effective slip systems via both the anisotropic slip line theory and numerical method. Also, the work hardening effect resulted from self-hardening, and latent hardening was analyzed through comparing the results with and without considering hardening.

36 MATERIALS SCIENCE↗

In situ Phase Transition Study of Nano- and Coarse-Grained TiO2 Under High Pressure/Temperature Conditions

A comparative phase transition study of nanocrystalline and micro-TiO2 has been conducted under high pressure-temperature (P-T) conditions using energy-dispersive synchrotron x-ray diffraction (XRD). Our study reveals that on compression at room temperature, the micro-tetragonal anatase-type TiO2 started to transform to the orthorhombic columbite-type TiO2 near 1.6 GPa. In contrast, we did not observe this phase transition in nano-anatase at pressures of up to 8.5 GPa. At 8.5 GPa, by applying moderate heat, both samples were transformed completely to columbite-type TiO2 almost simultaneously, indicating that heat treatment could significantly expedite this phase transition. These columbite-type TiO2 phases were quenchable because after cooling them to room temperature and decompressing them to 2.0 GPa, the XRD patterns displayed no changes in comparison with those collected at 8.6 GPa and 1270 K. At 2 GPa, we heated the specimens again, and the rutile-type TiO2 started to emerge around 970 K. This phase was also quenchable after cooling and releasing pressure to ambient conditions. The grain size effects on the phase transition were discussed based on the kinetics mechanism. This study should be of considerable interest to the fields of materials science and condensed matter.

43 PARTICLE ACCELERATORS↗

Thermal Equation of State of Rhenium Diboride by High Pressure-Temperature Synchrotron X-ray Studies

The unit-cell volume of rhenium diboride (ReB{sub 2}) has been measured by synchrotron X-ray diffraction at pressures and temperatures of up to 7.5 GPa and 1100 K with a cubic anvil apparatus. From the pressure (P)-volume (V)-temperature (T) measurements, thermoelastic parameters were derived for ReB2 based on a modified high-T Birch-Murnaghan equation of state and a thermal-pressure approach. With the pressure derivative of the bulk modulus, K{sub O{prime}}, fixed at 4.0, we obtain: the ambient bulk modulus K{sub O}=334(23)GPa, temperature derivative of bulk modulus at constant pressure ({delta}K/{delta}T){sub P}=0.064(6)GPaK{sup -1}, volumetric thermal expansivity {alpha}{sub T}(K{sup -1})=a+bT with a=1.33(25)x10{sup -5}K{sup -1} and b=1.48(64)x10 8K 2, pressure derivative of thermal expansion ({delta}{alpha}/{delta}P){sub T}=5.76(95)x10{sup -7}GPa{sup -1}K{sup -1}and temperature derivative of bulk modulus at constant volume ({delta}K/{delta}T){sub v}=0.049(11) GPaK{sup -1}. The ambient bulk modulus derived from this work is comparable to previous experimental and theoretical results. These results, including the ambient bulk modulus and other thermoelastic parameters determined in present study, extend our knowledge of the fundamental thermophysical properties on ReB{sub 2} and are important to the development of theoretical and computational modelings of hard materials.

43 PARTICLE ACCELERATORS↗

Implementation and performance of parallelized elegant.

The program elegant is widely used for design and modeling of linacs for free-electron lasers and energy recovery linacs, as well as storage rings and other applications. As part of a multi-year effort, we have parallelized many aspects of the code, including single-particle dynamics, wakefields, and coherent synchrotron radiation. We report on the approach used for gradual parallelization, which proved very beneficial in getting parallel features into the hands of users quickly. We also report details of parallelization of collective effects. Finally, we discuss performance of the parallelized code in various applications.

43 PARTICLE ACCELERATORS↗