Engineering Papers⌕ Search

Engineering topics

Wang, L

Publications and source records attributed to Wang, L.

At least 181 records · Page 10

Distortion of Crabbed Bunch Due to Electron Cloud and Global Crabbing

Crab cavities may be used improve the luminosity in colliding beam colliders with crab crossing. In a global crab crossing correction, only one crab cavity is installed in each ring and the crab cavities generate a horizontally titled bunch oscillating around the ring. The electron cloud in positively charged rings may distort the crabbed bunch and cause the luminosity drop. This paper briefly estimates the distortion of positron bunch due to the electron cloud with global crab and estimates the effect in the KEKB and possible LHC upgrades.

43 PARTICLE ACCELERATORS↗

Numerical simulation of multiphase flow and collision humidification in the multifluid alkaline spray generator for a novel semidry flue gas desulfurization system

A hybrid Eulerian-Lagrangian model was developed to simulate gas-droplet-particle multiphase flow and the collision humidification between sorbent particles and spray droplets in the confined multifluid alkaline spray generator for a novel semidry flue gas desulfurization system. In this model, the motions of discrete phases were tracked simultaneously by using a stochastic trajectory approach, and a probability model of droplets catching particles was presented to judge whether sorbent particles were caught with direct simulation Monte Carlo method. Numerical humidification efficiency of sorbent particles is validated by the experimental one deduced from the measured desulfurization efficiency. The effects of flue gas flow rate, spray droplet diameter, sorbent particle diameter, and particle injection location on the humidification efficiency were optimized. Numerical results show that the collision humidification efficiency of sorbent particles increases significantly at the axial distance of 1.67 times the generator diameter from the nozzle tip and reaches 78.5% without recirculation flow in the alkaline spray generator when the ratio of flue gas mass flow rate to spray water mass flow rate is 6.7. Moreover, there is an optimal droplet diameter ranging from 125 to 150 {mu} m and an optimal particle injection location corresponding to the maximum humidification efficiency in this paper.

01 COAL, LIGNITE, AND PEAT↗

Secondary Electron Yield Measurements and Groove Chambers Tests in the PEP-II Beam Line Straights Sections

Beam instability caused by the electron cloud has been observed in positron and proton storage rings and it is expected to be a limiting factor in the performance of the positron Damping Ring (DR) of future Linear Colliders such as ILC and CLIC [1, 2]. In the Positron Low Energy Ring (LER) of the PEP-II accelerator, we have installed vacuum chambers with rectangular grooves in a straight magnetic-free section to test this promising possible electron cloud mitigation technique. We have also installed a special chamber to monitor the secondary electron yield of TiN and TiZrV (NEG) coating, Copper, Stainless Steel and Aluminum under the effect of electron and photon conditioning in situ in the beam line. In this paper, we describe the ongoing R&D effort to mitigate the electron cloud effect for the ILC damping ring, the latest results on in situ secondary electron yield conditioning and recent update on the groove tests in PEP-II.

36 MATERIALS SCIENCE↗

A New Chicane Experiment In PEP-II to Test Mitigations of the Electron Cloud Effect for Linear Colliders

Beam instability caused by the electron cloud has been observed in positron and proton storage rings, and it is expected to be a limiting factor in the performance of future colliders [1-3]. The effect is expected to be particularly severe in magnetic field regions. To test possible mitigation methods in magnetic fields, we have installed a new 4-dipole chicane experiment in the PEP-II Low Energy Ring (LER) at SLAC with both bare and TiN-coated aluminum chambers. In particular, we have observed a large variation of the electron flux at the chamber wall as a function of the chicane dipole field. We infer this is a new high order resonance effect where the energy gained by the electrons in the positron beam depends on the phase of the electron cyclotron motion with respect to the bunch crossing, leading to a modulation of the secondary electron production. Presumably the cloud density is modulated as well and this resonance effect could be used to reduce its magnitude in future colliders. We present the experimental results obtained during January 2008 until the April final shut-down of the PEP-II machine.

43 PARTICLE ACCELERATORS↗

A New Chicane Experiment in PEP-II to Test Mitigations of the Electron Cloud Effect for Linear Colliders

Beam instability caused by the electron cloud has been observed in positron and proton storage rings, and it is expected to be a limiting factor in the performance of future colliders [1-3]. The effect is expected to be particularly severe in magnetic field regions. To test possible mitigation methods in magnetic fields, we have installed a new 4-dipole chicane experiment in the PEP-II Low Energy Ring (LER) at SLAC with both bare and TiN-coated aluminum chambers. In particular, we have observed a large variation of the electron flux at the chamber wall as a function of the chicane dipole field. We infer this is a new high order resonance effect where the energy gained by the electrons in the positron beam depends on the phase of the electron cyclotron motion with respect to the bunch crossing, leading to a modulation of the secondary electron production. Presumably the cloud density is modulated as well and this resonance effect could be used to reduce its magnitude in future colliders. We present the experimental results obtained during January 2008 until the April final shut-down of the PEP-II machine.

43 PARTICLE ACCELERATORS↗

Quantitative comparison between Type Ia supernova spectra at low and high redshifts: A case study

We develop a method to measure the strength of the absorption features in type Ia supernova (SN Ia) spectra and use it to make a quantitative comparisons between the spectra of type Ia supernovae at low and high redshifts. In this case study, we apply the method to 12 high-redshift (0.212 = z = 0.912) SNe Ia observed by the Supernova Cosmology Project. Through measurements of the strengths of these features and of the blueshift of theabsorption minimum in Ca ii H&K, we show that the spectra of the high-redshift SNe Ia are quantitatively similar to spectra of nearby SNe Ia (z< 0.15). One supernova in our high redshift sample, SN 2002fd at z = 0.279, is found to have spectral characteristics that are associated with peculiar SN 1991T/SN 1999aa-like supernovae.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

AC Losses in the MICE Channel Magnets -- Is This a Curse or aBlessing?

This report discusses the AC losses in the MICE channelmagnets during magnet charging and discharging. This report talks aboutthe three types of AC losses in the MICE magnets; the hysteretic AC lossin the superconductor, the coupling AC loss in the superconductor and theeddy current AC loss in the magnet mandrel and support structure. AClosses increase the heat load at 4 K. The added heat load increases thetemperature of the second stage of the cooler. In addition, AC losscontributes to the temperature rise between the second stage cold headand the high field point of the magnet, which is usually close to themagnet hot spot. These are the curses of AC loss in the MICE magnet thatcan limit the rate at which the magnet can be charge or discharged. Ifone is willing to allow some of the helium that is around the magnet toboil away during a magnet charge or discharge, AC losses can become ablessing. The boil off helium from the AC losses can be used to cool theupper end of the HTS leads and the surrounding shield. The AC losses arepresented for all three types of MICE magnets. The AC loss temperaturedrops within the coupling magnet are presented as an example of how boththe curse and blessing of the AC losses can be combined.

42 ENGINEERING↗

Mechanical properties and microstructures of a magnesium alloy gas tungsten arc welded with a cadmium chloride flux

Gas tungsten arc (GTA) welds were prepared on 5-mm thick plates of wrought magnesium AZ31B alloy, using an activated flux. The microstructural characteristics of the weld joint were investigated using optical and scanning microscopy, and the fusion zone microstructure was compared with that of the base metal. The elemental distribution was also investigated by electron probe microanalysis (EPMA). Mechanical properties were determined by standard tensile tests on small-scale specimens. The as-welded fusion zone prepared using a CdCl{sub 2} flux exhibited a larger grain size than that prepared without flux; the microstructure consisted of matrix {alpha}-Mg, eutectic {alpha}-Mg and {beta}-Al{sub 12}Mg{sub 17}. The HAZ was observed to be slightly wider for the weld prepared with a CdCl{sub 2} flux compared to that prepared without flux; thus the tensile strength was lower for the flux-prepared weld. The fact that neither Cd nor Cl was detected in the weld seam by EPMA indicates that the CdCl{sub 2} flux has a small effect on convection in the weld pool.

36 MATERIALS SCIENCE↗

The X-ray Crystallographic Structure and Activity Analysis of a Pseudomonas-Specific Subfamily of the HAD Enzyme Superfamily Evidences a Novel Biochemical Function

The haloacid dehalogenase (HAD) superfamily is a large family of proteins dominated by phosphotransferases. Thirty-three sequence families within the HAD superfamily (HADSF) have been identified to assist in function assignment. One such family includes the enzyme phosphoacetaldehyde hydrolase (phosphonatase). Phosphonatase possesses the conserved Rossmanniod core domain and a C1-type cap domain. Other members of this family do not possess a cap domain and because the cap domain of phosphonatase plays an important role in active site desolvation and catalysis, the function of the capless family members must be unique. A representative of the capless subfamily, PSPTO{_}2114, from the plant pathogen Pseudomonas syringae, was targeted for catalytic activity and structure analyses. The X-ray structure of PSPTO{_}2114 reveals a capless homodimer that conserves some but not all of the intersubunit contacts contributed by the core domains of the phosphonatase homodimer. The region of the PSPTO{_}2114 that corresponds to the catalytic scaffold of phosphonatase (and other HAD phosphotransfereases) positions amino acid residues that are ill suited for Mg+2 cofactor binding and mediation of phosphoryl group transfer between donor and acceptor substrates. The absence of phosphotransferase activity in PSPTO{_}2114 was confirmed by kinetic assays. To explore PSPTO{_}2114 function, the conservation of sequence motifs extending outside of the HADSF catalytic scaffold was examined. The stringently conserved residues among PSPTO{_}2114 homologs were mapped onto the PSPTO{_}2114 three-dimensional structure to identify a surface region unique to the family members that do not possess a cap domain. The hypothesis that this region is used in protein-protein recognition is explored to define, for the first time, HADSF proteins which have acquired a function other than that of a catalyst. Proteins 2008.

36 MATERIALS SCIENCE↗

Experimental Constraints on the Phase Diagram of Titanium Metal

The phase transformations of titanium metal have been studied at temperatures and pressures up to 973 K and 8.7 GPa using synchrotron X-ray diffraction. The equilibrium phase boundary of the a-? transition has a dT/dP slope of 345 K/GPa, and the transition pressure at room temperature is located at 5.7 GPa. The volume change across the a-? transition is ?V=0.197 cm3/mol, and the associated entropy change is ?S=0.57 J/mol K. Except for ?V, our results differ substantially from those of previous studies based on an equilibrium transition pressure of 2.0 GPa at room temperature. The a-?... triple point is estimated to be at 7.5 GPa and 913 K, which is comparable with previous results obtained from differential thermal analysis and resistometric measurements. An update, more accurate phase diagram is established for Ti metal based on the present observations and previous constraints on the a-e and ?-e phase boundaries.

43 PARTICLE ACCELERATORS↗

Residual Stresses in LENS-Deposited AISI 410 Stainless Steel Plates

The residual stress in thin plate components deposited by the laser engineered net shaping (LENS{reg_sign}) process was investigated experimentally and numerically. Neutron diffraction mapping was used to characterize the residual stress in LENS-deposited AISI 410 stainless steel thin wall plates. Using the commercial welding software SYSWELD, a thermo-mechanical three-dimensional finite element model was developed, which considers also the effect of metallurgical phase transformations. The model was employed to predict the temperature history and the residual stress field during the LENS process. Several simulations were performed with the geometry and process parameters that were used to build the experimental samples. The origin of the residual stress distribution is discussed based on the thermal histories of the samples, and the modeling results are compared with measurements obtained by neutron diffraction mapping.

36 MATERIALS SCIENCE↗

Elastic Softening of Peridotite Due to the Presence of Melt Phases at High Pressure

Here we report an observation of softening of Young's modulus of a sample of KLB-1 peridotite as a metallic Ni melt intruded into it at 2.5 GPa and about 1500 C. A uniaxial oscillation of stress was applied to the sample with frequency of 0.01-0.02 Hz and an amplitude up to 500 MPa. The Young's modulus is measured as the amplitude ratio between the sample and a reference material, while the attenuation is determined by the phase angle delays. The Ni intrusion was captured by in situ X-ray radiography. A planar intrusion occurred gradually, but advanced only during the extension; eventually, the Ni melt dissected the sample on a plane normal to the extension axis. Accompanied softening of Young's modulus was observed after the Ni intrusion was completed. This study suggests that percolation of a liquid metallic phase is possible within a partially melted mantle rock in the presence of a differential stress field.

36 MATERIALS SCIENCE↗

Experimental Investigation of the Creep Behvior of MgO at High Pressures

The high-temperature rheological behavior of polycrystalline periclase, MgO, has been investigated using the deformation-DIA on a synchrotron beamline at pressures up to 10 GPa. Significant experimental scatter in stress measurement illustrates current limitations of this technique. Although temperature and stress sensitivities are not well constrained, there is a clear dependence of creep rate on pressure. Based on our results, the creep rate of MgO depends on confining pressure with an activation volume of V* e 2.4 x 10-6 m3/mol. The grain-scale view of deformation processes reveals, as other D-DIA studies have, that subpopulations of grains, grouped by orientation, obey slightly different flow laws. The measurements also reveal that stress heterogeneity in the sample, whether caused by external conditions or processes internal to the sample itself, contribute a significant portion of the overall uncertainty in stress measurement.

43 PARTICLE ACCELERATORS↗

Structure Stability and Compressibility of Iron-Based Superconductor Nd(O0.88F0.12)FeAs under High Pressure

The high-pressure angle-dispersive X-ray diffraction experiments on the iron-based superconductor Nd(O0.88F0.12)FeAs were performed up to 32.7 GPa at room temperature. An isostructural phase transition starts at 10 GPa. When pressure is higher than 13.5 GPa, Nd(O0.88F0.12)FeAs completely transforms to a high-pressure phase, which remains the same tetragonal structure with a larger a-axis and smaller c-axis than those of the low-pressure phase. The ambient conditions isothermal bulk moduli B0 are derived as 102(2) and 245(9) GPa for the low-pressure phase and high-pressure phase, respectively. The structure analysis based on the Rietveld refinement methods shows the difference of pressure dependence of the Fe-As and Nd-(O, F) bonding distances, as well as As-Fe-As and Nd-(O, F)-Nd angles between the low-pressure phase and high-pressure phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Characterization of Transparent Conducting Oxide Surfaces Using Self-Assembled Electroactive Monolayers

The electronic properties of various transparent conducting oxide (TCO) surfaces are probed electrochemically via self-assembled monolayers (SAMs). A novel graftable probe molecule having a tethered trichlorosilyl group and a redox-active ferrocenyl functionality (Fc(CH2)4SiCl3) is synthesized for this purpose. This molecule can be self-assembled via covalent bonds to form monolayers on various TCO surfaces. On as-received ITO, saturation coverage of 6.6 x 10-10 mol/cm2 by a close-packed monolayer and an electron-transfer rate of 6.65 s-1 is achieved after 9 h of chemisorption, as determined by cyclic voltammetry (CV) and synchrotron X-ray reflectivity. With this molecular probe, it is found that O2 plasma-treated ITO has a significantly greater electroactive coverage of 7.9 x 10-10 mol/cm2 than as-received ITO. CV studies of this redox SAM on five different TCO surfaces reveal that MOCVD-derived CdO exhibits the greatest electroactive coverage (8.1 x 10-10 mol/cm2) and MOCVD-derived ZITO (ZnIn2.0Sn1.5O) exhibits the highest electron transfer rate (7.12 s-1).

36 MATERIALS SCIENCE↗

The Structural Basis of Protein Acetylation by the p300/CBP Transcriptional Coactivator

The transcriptional coactivator p300/CBP (CREBBP) is a histone acetyltransferase (HAT) that regulates gene expression by acetylating histones and other transcription factors. Dysregulation of p300/CBP HAT activity contributes to various diseases including cancer. Sequence alignments, enzymology experiments and inhibitor studies on p300/CBP have led to contradictory results about its catalytic mechanism and its structural relation to the Gcn5/PCAF and MYST HATs. Here we describe a high-resolution X-ray crystal structure of a semi-synthetic heterodimeric p300 HAT domain in complex with a bi-substrate inhibitor, Lys-CoA. This structure shows that p300/CBP is a distant cousin of other structurally characterized HATs, but reveals several novel features that explain the broad substrate specificity and preference for nearby basic residues. Based on this structure and accompanying biochemical data, we propose that p300/CBP uses an unusual 'hit-and-run' (Theorell-Chance) catalytic mechanism that is distinct from other characterized HATs. Several disease-associated mutations can also be readily accounted for by the p300 HAT structure. These studies pave the way for new epigenetic therapies involving modulation of p300/CBP HAT activity.

36 MATERIALS SCIENCE↗

Combined in situ Synchrotron X-ray Diffraction and Ultrasonic Interferometry Study of e-FeSi at High Pressure and Temperature

Ultrasonic interferometry was used in combination with synchrotron X-radiation to determine the compressional and shear wave velocities and unit-cell volumes of {Epsilon}-FeSi (cubic B20 structure) at room temperature and pressures up to {approx}12 GPa. The data collected during compression are compared with those collected during decompression after heating to release stress within the sample cell. By fitting all of the decompression unit-cell volume and sound velocity data to third-order finite-strain equations, we obtain the adiabatic zero-pressure bulk and shear moduli and their first pressure derivatives: K{sub S0}=169.3 (8) GPa, G{sub 0}=116.3 (4) GPa, K'S0=6.5(3), G'0=3.0(1). The bulk modulus obtained from this study is in good agreement with those of some previous experimental studies, but significantly lower than those obtained by first-principle calculations. This study presents the first direct measurement on the shear properties of this phase.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Strength Measurement of Boron Suboxide B6O at High Pressure and Temperature Using in situ Synchrotron X-ray Diffraction

The strength of boron suboxide (B6O) was measured at high pressure and temperature up to 8 GPa and 800 C using diffraction peak broadening analysis. The sample was synthesized at 6 GPa and 1750 C. In situ energy dispersive X-ray diffraction was conducted at the X17B2 beamline of the National Synchrotron Light Source. The differential stress in the powdered sample was derived through deconvolution of peak broadening of diffraction lines (0 2 1) and (1 1 3) during the compression and heating. The sample shows anisotropic yielding along the two orientations. The (0 2 1) orientation does not show yielding within the investigated pressure range (8 GPa) whereas the (1 1 3) orientation yields at 5 GPa. Upon heating, significant weakening (yielding) was observed at temperatures above 400 C. The yield temperature of boron suboxide is much lower than that of diamond, 1200 C, but similar to that observed in moissanite (SiC).

43 PARTICLE ACCELERATORS↗