Engineering Papers⌕ Search

Engineering topics

Wang, L

Publications and source records attributed to Wang, L.

189 records · Page 11

Compressional and Shear Wave velocities of Fe2SiO4 Spinel at High Pressure and High Temperature

Ultrasonic interferometric measurements on polycrystalline Fe{sub 2}SiO{sub 4} spinel were conducted simultaneously with synchrotron X-ray diffraction and X-ray imaging up to 6.5 GPa, 1073 K. The compressional and shear wave velocity data and the volume data were fitted to the third-order finite strain equations to derive the bulk and shear modulus and their pressure and temperature derivatives. The fitting results are as follows: K{sub s0}=204.5(7) GPa,=73.6(3) GPa, K's=4.3(3), G'=1.2(1), ({delta} K{sub s/{delta}} T){sub p}=-0.027(2) GPa/K, and {delta} (G/{delta} T){sub p}=-0.017(1) GPa/K. Comparison of our current results with previous data on (Mg,Fe){sub 2}SiO{sub 4} spinel with different compositions suggests that the bulk modulus (Ks) increases slightly with increasing iron content, while the shear modulus (G), in contrast, shows a dramatic decrease. However, the pressure and temperature derivatives of Ks and G remain nearly constant from Mg{sub 2}SiO{sub 4} to Fe{sub 2}SiO{sub 4} spinel with average values of 4.2-4.4, 1.2-1.3,-0.024 GPa/K, and-0.016 GPa/K for K's, G', ({delta} K{sub s/{delta}} T){sub p}, and ({delta} G/{delta} T){sub p}, respectively. The proposed version of equations to describe the effects of iron on the elastic moduli of ringwoodite are: Ks=184.7+18.0 X{sub Fe}, and G=118.7-41.5 X{sub Fe}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In situ Phase Transition Study of Nano- and Coarse-Grained TiO2 Under High Pressure/Temperature Conditions

A comparative phase transition study of nanocrystalline and micro-TiO2 has been conducted under high pressure-temperature (P-T) conditions using energy-dispersive synchrotron x-ray diffraction (XRD). Our study reveals that on compression at room temperature, the micro-tetragonal anatase-type TiO2 started to transform to the orthorhombic columbite-type TiO2 near 1.6 GPa. In contrast, we did not observe this phase transition in nano-anatase at pressures of up to 8.5 GPa. At 8.5 GPa, by applying moderate heat, both samples were transformed completely to columbite-type TiO2 almost simultaneously, indicating that heat treatment could significantly expedite this phase transition. These columbite-type TiO2 phases were quenchable because after cooling them to room temperature and decompressing them to 2.0 GPa, the XRD patterns displayed no changes in comparison with those collected at 8.6 GPa and 1270 K. At 2 GPa, we heated the specimens again, and the rutile-type TiO2 started to emerge around 970 K. This phase was also quenchable after cooling and releasing pressure to ambient conditions. The grain size effects on the phase transition were discussed based on the kinetics mechanism. This study should be of considerable interest to the fields of materials science and condensed matter.

43 PARTICLE ACCELERATORS↗

Thermal Equation of State of Rhenium Diboride by High Pressure-Temperature Synchrotron X-ray Studies

The unit-cell volume of rhenium diboride (ReB{sub 2}) has been measured by synchrotron X-ray diffraction at pressures and temperatures of up to 7.5 GPa and 1100 K with a cubic anvil apparatus. From the pressure (P)-volume (V)-temperature (T) measurements, thermoelastic parameters were derived for ReB2 based on a modified high-T Birch-Murnaghan equation of state and a thermal-pressure approach. With the pressure derivative of the bulk modulus, K{sub O{prime}}, fixed at 4.0, we obtain: the ambient bulk modulus K{sub O}=334(23)GPa, temperature derivative of bulk modulus at constant pressure ({delta}K/{delta}T){sub P}=0.064(6)GPaK{sup -1}, volumetric thermal expansivity {alpha}{sub T}(K{sup -1})=a+bT with a=1.33(25)x10{sup -5}K{sup -1} and b=1.48(64)x10 8K 2, pressure derivative of thermal expansion ({delta}{alpha}/{delta}P){sub T}=5.76(95)x10{sup -7}GPa{sup -1}K{sup -1}and temperature derivative of bulk modulus at constant volume ({delta}K/{delta}T){sub v}=0.049(11) GPaK{sup -1}. The ambient bulk modulus derived from this work is comparable to previous experimental and theoretical results. These results, including the ambient bulk modulus and other thermoelastic parameters determined in present study, extend our knowledge of the fundamental thermophysical properties on ReB{sub 2} and are important to the development of theoretical and computational modelings of hard materials.

43 PARTICLE ACCELERATORS↗

Network Rigidity in GeSe2 Glass at High Pressure

Acoustic measurements using synchrotron radiation have been performed on glassy GeSe2 up to pressures of 9.6 GPa. A minimum observed in the shear-wave velocity, associated anomalous behavior in Poisson's ratio, and discontinuities in elastic moduli at 4 GPa are indicative of a gradual structural transition in the glass. This is attributed to a network rigidity minimum originating from a competition between two densification mechanisms. At pressures up to 3 GPa, a conversion from edge- to corner-sharing tetrahedra results in a more flexible network. This is contrasted by a gradual increase in coordination number with pressure, which leads to an overall stiffening of the glass.

43 PARTICLE ACCELERATORS↗

Thermal Equation of State of CaGeO3 Perovskite

Pressure-volume-temperature data have been obtained for CaGeO3 perovskite up to 9.6 GPa and 1100 K using a cubic anvil, DIA-type high-pressure apparatus in conjunction with synchrotron X-ray diffraction. The data were analyzed using Birch-Murnaghan equation of state and thermal pressure approach with the bulk modulus at ambient pressure, KT0, and its pressure derivative, K'T0, constrained by previous measurements. A fit of the unit-cell volume data to the high-temperature Birch-Murnaghan (HTBM) equation of state gives ({sub partial}KT/{sub partial}T)P = -0.025 {+-} 0.015 GPa/K, a = 1.047 {+-} 0.356 x 10-5/K, and b = 3.282 {+-} 0.735 x 10-8/K2 for the thermal expansion {alpha} expressed by a + bT. The thermal pressure approach yields {alpha}KT = 4.04 {+-} 0.37 x 10-3 GPa/K and ({sub partial}2P/{sub partial}T2)V = 6.17 {+-} 1.28 x 10-6 GPa/K2. The energy dispersive X-ray diffraction data reveal no indication of a structural phase transition over the P-T range of the current experiment. A systematic relationship, KS0 = 6720/V(molar) - 13.07 GPa, has been established based on these isostructural analogues, which predicts KS0 = 261(15) for MgSiO3 perovskite and 225(8) for CaSiO3 perovskite, respectively.

36 MATERIALS SCIENCE↗

Coupling effect of electron cyclotron resonance hydrogen plasma and dc biasing in fabricating diamond nanotips

The electron cyclotron resonance (ECR) hydrogen plasma with substrate dc biasing was investigated by using a Langmuir probe and optical emission spectroscopy during the formation of nanotips from as-grown diamond films. It is found that the coupling effect between the substrate biasing and the bulk plasma plays an important role in the fluxes of active species incident on the substrate. The energy of incident hydrogen ions is determined by the substrate biasing, while the densities of incident hydrogen ions and atoms are adjusted jointly by the substrate biasing and the bulk plasma. Diamond nanotips were fabricated from as-grown films under ECR-dc conditions. The shapes and sizes of the nanotips vary with the processing parameters, which are correlated with the change of active species on the film surface due to the coupling effect.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Quench Protection for the MICE Cooling Channel CouplingMagnet

The MICE coupling coil is fabricated from Nb-Ti, which hashigh quench propagation velocities within the coil in all directionscompared to coils fabricated with other superconductors such as niobiumtin. The time for the MICE coupling coil to become fully normal throughnormal region propagation in the coil is shorter than the time needed fora safe quench (as defined by a hot-spot temperature that is less than 300K). A MICE coupling coil quench was simulated using a code written at theInstitute of Cryogenics and Superconductive Technology (ICST) at theHarbin Institute of Technology (HIT). This code simulates quench backfrom the mandrel as well as normal region propagation within the coil.The simulations included sub-division of the coil. Each sub-division hasa back to back diodes and resistor across the coil. Current flows in theresistor when there is enough voltage across the coil to cause current toflow through the diodes in the forward direction. The effects of thenumber of coil sub-divisions and the value of the resistor across thesub-division on the quench were calculated with and without quench back.Sub-division of the coupling coil reduces the peak voltage to ground, thelayer-to-layer voltage and the magnet hot-spot temperature. Quench backreduces the magnet hot-spot temperature, but the peak voltage to groundand layer-to-layer voltage are increased, because the magnet quenchesfaster. The resistance across the coil sub-division affects both thehot-spot temperature and the peak voltage to ground.

42 ENGINEERING↗

Secondary Electron Yield and Groove Chamber Tests in PEP-II

Possible remedies for the electron cloud in positron damping ring (DR) of the International Linear Collider (ILC) includes thin-film coatings, surface conditioning, photon antechamber, clearing electrodes and chamber with grooves or slots [1]. We installed chambers in the PEP-II Low Energy Ring (LER) to monitor the secondary electron yield (SEY) of TiN, TiZrV (NEG) and technical accelerator materials under the effect of electron and photon conditioning in situ. We have also installed chambers with rectangular grooves in straight sections to test this possible mitigation technique. In this paper, we describe the ILC R&D ongoing effort at SLAC to reduce the electron cloud effect in the damping ring, the chambers installation in the PEP-II and latest results.

43 PARTICLE ACCELERATORS↗