Engineering Papers⌕ Search

Engineering topics

Wang, L

Publications and source records attributed to Wang, L.

At least 163 records · Page 9

In situ characterization of initial growth of HfO{sub 2}

The initial growth of HfO{sub 2} on Si (111) is monitored in situ by ultrahigh vacuum (UHV) scanning probe microscopy. UHV scanning tunneling microscopy and UHV atomic force microscopy reveal the topography of HfO{sub 2} films in the initial stage. The chemical composition is further confirmed by x-ray photoelectron spectroscopy. Scanning tunneling spectroscopy is utilized to inspect the evolution of the bandgap. When the film thickness is less than 0.6 nm, the bandgap of HfO{sub 2} is not completely formed. A continuous usable HfO{sub 2} film with thickness of about 1.2 nm is presented in this work.

36 MATERIALS SCIENCE↗

Modeling regional/urban ozone and particulate matter in Beijing, China.

This paper examines Beijing air quality in the winter and summer of 2001 using an integrated air quality modeling system (Fifth Generation Mesoscale Meteorological Model (MM5)/Community Multiscale Air Quality (CMAQ)) in nested mode. The National Aeronautics and Space Administration (NASA) Transport and Chemical Evolution over the Pacific (TRACE-P) emission inventory is used in the 36- (East Asia), 12- (East China), and 4-km (greater Beijing area) domains. Furthermore, we develop a local Beijing emission inventory that is used in the 4-km domain. We also construct a corroborated mapping of chemical species between the TRACE-P inventory and the Carbon Bond IV (CB-IV) chemical mechanism before the integrated modeling system is applied to study ozone (O{sub 3}) and particulate matter (PM) in Beijing. Meteorological data for the integrated modeling runs are extracted from MM5. Model results show O{sub 3} hourly concentrations in the range of 80-159 parts per billion (ppb) during summer in the urban areas and up to 189 ppb downwind of the city. High fine PM (PM2.5) concentrations (monthly average of 75 {mu}g.m{sup -3} in summer and 150 {mu}g.m{sup -3} in winter) are simulated over the metropolitan and down-wind areas with significant secondary constituents. Major sources of particulates were biomass burning, coal combustion and industry. A comparison against available O{sub 3} and PM measurement data in Beijing is described. We recommend refinements to the developed local Beijing emission inventory to improve the simulation of Beijing's air quality. The 4-km modeling configuration is also recommended for the development of air pollution control strategies. 31 refs., 5 figs., 3 tabs.

01 COAL, LIGNITE, AND PEAT↗

Strain heterogeneity and damage nucleation at grain boundaries during monotonic deformation in commercial purity titanium.

Heterogeneous strain was analyzed in polycrystalline, commercial-purity titanium using many experimental techniques that provide information about microstructure, dislocation arrangement, grain orientation, orientation gradients, surface topography, and local strain gradients. The recrystallized microstructure with 50-200 {micro}m grains was extensively characterized before and after deformation using 4-point bending to strains between 2% and 15%. Extremely heterogeneous deformation occurred along some grain boundaries, leading to orientation gradients exceeding 10{sup o} over 10-20 {micro}m. Patches of highly characterized micro-structure were modeled using crystal plasticity finite element (CPFE) analysis to simulate the deformation to evaluate the ability of the CPFE model to capture local deformation processes. Damage nucleation events were identified that are associated with twin interactions with grain boundaries. Progress toward identifying fracture initiation criteria based upon slip and twin interactions with grain boundaries is illustrated with related CPFE simulations of deformation in a TiAl alloy.

36 MATERIALS SCIENCE↗

Pressure and Temperature Dependence of the Elasticity of Pyrope-Majorite [Py60Mj40 and Py50Mj50] Garnets Solid Solution Measured by Ultrasonic Interferometry Technique

Compressional (P) and shear (S) wave velocities have been measured for two synthetic polycrystalline specimens of pyrope-majorite garnets [Py60Mj40 and Py50Mj50] by ultrasonic interferometry to 8 GPa and 1000 K, in a DIA-type cubic anvil high pressure apparatus (SAM-85) interfaced with synchrotron X-radiation and X-ray imaging. Elastic bulk (KS) and shear (G) moduli data obtained at the end of the cooling cycles were fitted to functions of Eulerian strain to third order yielding pressure derivatives of the elastic moduli (?KS/?P)T = 4.3 (3); (?G/?P)T = 1.5 (1) for Py60Mj40 garnet and (?KS/?P)T = 4.4 (1); (?G/?P)T = 1.3 (1) for Py50Mj40 garnet. Both (?KS/?P)T and (?G/?P)T are identical for the two garnet compositions and are also consistent with Brillouin scattering data for polycrystalline Py50Mj50. Moreover, the new pressure derivatives of the elastic moduli are equal within experimental uncertainties to those of end-member pyrope garnet from ultrasonic studies.

43 PARTICLE ACCELERATORS↗

New Measurements of Activation Volume in Olvine Under Anhydrous Conditions

A new cell assembly for the deformation-DIA (D-DIA) shows promise for limiting the water content of samples and providing a more mechanically stable environment for deformation. The 6-mm cubic cell consists of a 6-mm diameter mullite sphere cradled in a web of unfired pyrophyllite. The pyrophyllite flows during initial compression of the D-DIA to form gaskets between the six anvils while the mullite flows to become a nearly cubic-shaped pressure medium. Measurements on olivine indicate more than one order of magnitude drop in water content to <40 ppm H/Si compared with the boron-epoxy medium. Improved mechanical stability is achieved by elimination of the thermocouple from the assembly and determination of temperature from calibration curves of furnace power vs. temperature. Three samples of polycrystalline orthopyroxene-buffer San Carlos olivine have been deformed in high-temperature creep in the new cell, at pressures of 2.7-4.9 GPa and temperatures near 1473 K. Strength is consistent with that measured in the gas-apparatus at lower pressures. Over the pressure range investigated we resolve an activation volume for creep of dry olivine of V* = 9.5 {+-} 7 x 10-6 m3/mol.

43 PARTICLE ACCELERATORS↗

An Exploratory Study of the Viscoelasticity of Phase-Transforming Material

Attenuation and modulus dispersion are typically associated with shear stress and strain. Time-dependent volume changes accompanying pressure variations can give rise to bulk modulus attenuation and dispersion. Phase transformations in a two-phase region are candidates for such phenomena. Here we report laboratory data that are consistent with bulk modulus softening as pressure is cycled in a region of coexisting olivine and spinel. We use Fay70For30 olivine as our sample. Experiments are performed in a multi-anvil high-pressure apparatus (Deformation DIA) using synchrotron (NSLS) X-ray radiation as the probing tool. Pressure is up to 12 GPa and temperature is up to 1450 C. Measurements were carried out within the binary loop where the olivine and spinel phases coexist. We apply a uniaxial oscillation stress onto the sample and Young's modulus and Q{sup -1} are measured at frequencies of 0.1-0.01 Hz. Our results indicate that the sinusoidal force applied to the sample in olivine-ringwoodite region has much lower bulk modulus and higher Q{sup -1} than in the single-phase regions. Our data are consistent with the diffusion controlled model of (Jackson, I., 2007. Physical origins of anelasticity and attenuation in rock, In: Price, G.D. (Ed.) Mineral Physics. Treatise On Geophysics. Elsevier), where the characteristic time decreases with decreasing strain.

04 OIL SHALES AND TAR SANDS↗

Weakening of Calcium Iridate During its Transformation from Perovskite to Post-Perovskite

The lowermost part of the Earth's mantle - the {approx}200-km-thick D{double_prime} layer - shows anomalous seismic properties, and is rheologically distinct from the rest of the lower mantle. The difference is thought to result from a phase transition from silicate perovskite to silicate post-perovskite. However, the rheology of the latter phase remains to be documented owing to experimental difficulties in reproducing pressures equivalent to those in the lowermost mantle. Here we address this problem by conducting laboratory experiments that use calcium iridate, which has been shown to be an appropriate low-pressure analogue. We find that the post-perovskite phase of this analogue is approximately five times weaker than its perovskite phase, and that it further weakens by a factor of two during the phase transformation; these are minimum estimates. If, as is likely, a similar weakening occurs in lower-mantle magnesium - silicate compositions, this could provide an explanation for the behaviour of the lowermost mantle as inferred from geophysical data.

58 GEOSCIENCES↗

Thermal Equation of State of Copper Studied by High P-T Synchrotron X-ray Diffraction

The unit-cell volume of copper (Cu) has been measured by synchrotron x-ray at pressures and temperatures of up to 8.1 GPa and 1100 K. From pressure-volume-temperature (P-V-T) measurements, thermoelastic parameters of Cu were derived based on a modified high-T Birch-Murnaghan equation of state and a thermal pressure approach. The ambient bulk modulus derived from this work is comparable to previously reported value, whereas all other thermoelastic parameters of Cu have never been determined before. These results extend our knowledge of the fundamental thermophysical properties on Cu.

36 MATERIALS SCIENCE↗

Structure-Function Analysis of 2-Keto-3-Deoxy-D-Glycero-D-Galacto-Nononate-9-Phosphate Phosphatase Defines Specificity Elements in Type C0 had Family Members

The phosphotransferases of the haloalkanoate dehalogenase superfamily (HADSF) act upon a wide range of metabolites in all eukaryotes and prokaryotes and thus constitute a significant force in cell function. The challenge posed for biochemical function assignment of HADSF members is the identification of the structural determinants that target a specific metabolite. The '8KDOP' subfamily of the HADSF is defined by the known structure and catalytic activity of 2-keto-3-deoxy-8-phospho-d-manno-octulosonic acid (KDO-8-P) phosphatase. Homologues of this enzyme have been uniformly annotated as KDO-8-P phosphatase. One such gene, BT1713, from the Bacteroides thetaiotaomicron genome was recently found to encode the enzyme 2-keto-3-deoxy-d-glycero-d-galacto-9-phosphonononic acid (KDN-9-P) phosphatase in the biosynthetic pathway of the 9-carbon ?-keto acid, 2-keto-3-deoxy-d-glycero-d-galactonononic acid (KDN). To find the structural elements that provide substrate-specific interactions and to allow identification of genomic sequence markers, the x-ray crystal structures of BT1713 liganded to the cofactor Mg2+and complexed with tungstate or Formula/Neu5Ac were determined to 1.1, 1.85, and 1.63 A resolution, respectively. The structures define the active site to be at the subunit interface and, as confirmed by steady-state kinetics and site-directed mutagenesis, reveal Arg-64*, Lys-67*, and Glu-56 to be the key residues involved in sugar binding that are essential for BT1713 catalytic function. Bioinformatic analyses of the differentially conserved residues between BT1713 and KDO-8-P phosphatase homologues guided by the knowledge of the structure-based specificity determinants define Glu-56 and Lys-67* to be the key residues that can be used in future annotations.

36 MATERIALS SCIENCE↗

Coupled structural/magnetocrystalline anisotropy transitions in the doped perovskite cobaltite Pr{sub 1-x}Sr{sub x}CoO{sub 3}.

Years of intensive work on perovskite manganites has led to a detailed understanding of the phenomena that emerge from competition between the electronic and lattice degrees of freedom in these correlated electron systems. It is well understood that the related cobaltites provide an additional spin-state degree of freedom. Here, we use the magnetic properties of a particular cobaltite, Pr{sub 1-x}Sr{sub x}CoO{sub 3}, to demonstrate the vital role played by a further ingredient often negligible in manganites; magnetocrystalline anisotropy. Pr{sub 1-x}Sr{sub x}CoO{sub 3} exhibits an anomalous 'double magnetic transition' that cannot be ascribed to a spin-state transition or the usual charge/orbital/antiferromagnetic ordering and has thus far evaded explanation. We show that this is actually due to a coupled structural/magnetocrystalline anisotropy transition driven, in this case, by Pr-O hybridization. The results point to the existence of a distinct class of phenomena in the cobaltites due to the unique interplay between structure and magnetic anisotropy.

36 MATERIALS SCIENCE↗

Thermoelasticity of e-FeSi to 8 GPa and 1273 K

The elastic properties of {Sigma}-FeSi were investigated at high temperature and pressure using a combination of ultrasonic interferometry and synchrotron radiation up to 8 GPa and 1273 K. The unit-cell volumes and sound velocity data were fit to third-order finite-strain equations with adiabatic temperature conversions to maintain a thermodynamically internally consistent data set. The adiabatic zero-pressure bulk and shear moduli and their first pressure and temperature derivatives were obtained from this fitting: K{sub S0} = 168.9(7) GPa, G{sub 0} = 116.5(3) GPa, K{sub S0}{prime} = 6.6(2), G{sub 0}{prime} = 2.9(1), ({delta}K{sub S0}/{delta}T){sub P} = -0.023(1) GPa/K, ({delta}G{sub 0}/{delta}T){sub P} = -0.030(1) GPa/K. This study presents the first complete thermodynamically consistent set of elastic moduli and their temperature and pressure derivatives.

36 MATERIALS SCIENCE↗

Asian emissions in 2006 for the NASA INTEX-B mission.

A new inventory of air pollutant emissions in Asia in the year 2006 is developed to support the Intercontinental Chemical Transport Experiment-Phase B (INTEX-B) funded by the National Aeronautics and Space Administration (NASA). Emissions are estimated for all major anthropogenic sources, excluding biomass burning. We estimate total Asian anthropogenic emissions in the year 2006 as follows: 47.1 Tg SO{sub 2}, 36.7 Tg NO{sub x}, 298.2 Tg CO, 54.6 Tg NMVOC, 29.2 Tg PM{sub 10}, 22.2 Tg PM{sub 2.5}, 2.97 Tg BC, and 6.57 Tg OC. We emphasize emissions from China because they dominate the Asia pollutant outflow to the Pacific and the increase of emissions from China since 2000 is of great concern. We have implemented a series of improved methodologies to gain a better understanding of emissions from China, including a detailed technology-based approach, a dynamic methodology representing rapid technology renewal, critical examination of energy statistics, and a new scheme of NMVOC speciation for model-ready emissions. We estimate China's anthropogenic emissions in the year 2006 to be as follows: 31.0 Tg SO{sub 2}, 20.8 Tg NO{sub x}, 166.9 Tg CO, 23.2 Tg NMVOC, 18.2 Tg PM{sub 10}, 13.3 Tg PM{sub 2.5}, 1.8 Tg BC, and 3.2 Tg OC. We have also estimated 2001 emissions for China using the same methodology and found that all species show an increasing trend during 2001-2006: 36% increase for SO{sub 2}, 55% for NOx, 18% for CO, 29% for VOC, 13% for PM{sub 10}, and 14% for PM{sub 2.5}, BC, and OC. Emissions are gridded at a resolution of 30 min x 30 min and can be accessed at our web site (http://mic.greenresource.cn/intex-b2006).

09 BIOMASS FUELS↗

Pressure-induced Amorphization and Polyamorphism in One-Dimensional Single Crystal TiO2 Nanomaterials

The structural phase transitions of single-crystal TiO{sub 2}-B nanoribbons were investigated in situ at high pressure using synchrotron X-ray diffraction and Raman scattering. Our results have shown a pressure-induced amorphization (PIA) occurred in TiO{sub 2}-B nanoribbons upon compression, resulting in a high-density amorphous (HDA) form related to the baddeleyite structure. Upon decompression, the HDA form transforms to a low-density amorphous (LDA) form, while the samples still maintain their pristine nanoribbon shape. A high-resolution transmission electron microscopy (HRTEM) image reveals that the LDA phase has an {alpha}-PbO{sub 2} structure with short-range order. We propose a homogeneous nucleation mechanism to explain the pressure-induced amorphous phase transition in the TiO{sub 2}-B nanoribbons. Our study demonstrates for the first time that PIA and polyamorphism occurred in the one-dimensional (1D) TiO{sub 2} nanomaterials and provides a new method for preparing 1D amorphous nanomaterials from crystalline nanomaterials.

58 GEOSCIENCES↗

Estimating individual-level exposure to airborne polycyclic aromatic hydrocarbons throughout the gestational period based on personal, indoor, and outdoor monitoring

Current understanding on health effects of long-term polycyclic aromatic hydrocarbon (PAH) exposure is limited by lack of data on time-varying nature of the pollutants at an individual level. In a cohort of pregnant women in Krakow, Poland, we examined the contribution of temporal, spatial, and behavioral factors to prenatal exposure to airborne PAHs within each trimester and developed a predictive model of PAH exposure over the entire gestational period. The observed personal, indoor, and outdoor B(a)P levels we observed in Krakow far exceed the recommended Swedish guideline value for B(a)P of 0.1 ng/m{sup 3}. Based on simultaneously monitored levels, the outdoor PAH level alone accounts for 93% of total variability in personal exposure during the heating season. Living near the Krakow bus depot, a crossroad, and the city, center and time spent outdoors or commuting were not associated with higher personal exposure. During the nonheating season only, a 1-hr increase in environmental tobacco smoke (ETS) exposure was associated with a 10-16% increase in personal exposure to the nine measured PAHs. A 1{degree}C decrease in ambient temperature was associated with a 3-5% increase in exposure to benz(a)anthracene, benzo(k)fluoranthene, and dibenz(a,h)anthracene, after accounting for the outdoor concentration. A random effects model demonstrated that mean personal exposure at a given gestational period depends on the season, residence location, and ETS. Considering that most women reported spending < 3 hr/day outdoors, most women in the study were exposed to outdoor-originating PAHs within the indoor setting. Cross-sectional, longitudinal monitoring supplemented with questionnaire data allowed development of a gestation-length model of individual-level exposure with high precision and validity.

01 COAL, LIGNITE, AND PEAT↗

Enhanced thermal stability of carbon nanotubes by plasma surface modification in Al{sub 2}O{sub 3} composites

A plasma polymerization method was employed to deposit an ultrathin pyrrole film of 3 nm onto the surfaces of single wall carbon nanotubes (SWCNTs) and Al{sub 2}O{sub 3} nanoparticles for developing high-strength nanocomposites. The surfaces of plasma coated SWCNTs and Al{sub 2}O{sub 3} nanoparticles were studied by high resolution transmission electron microscopy (TEM) and time-of-flight secondary ion mass spectroscopy. After sintering the SWCNTs-Al{sub 2}O{sub 3} composites at different temperatures (maximum of 1200 deg. C), the thermal stability of plasma-coated SWCNTs was significantly increased, compared to their uncoated counterparts. After hot-press sintering, the SWCNTs without plasma coating were essentially decomposed into amorphous clusters in the composites, leading to degraded mechanical properties. However, under the same sintering conditions, the plasma surface modified SWCNTs were well preserved and distributed in the composite matrices. The effects of plasma surface coating on the thermal stability of SWCNTs and mechanical behavior of the nanocomposites are discussed.

36 MATERIALS SCIENCE↗

Simultaneous ultrasonic and synchrotron x-ray studies on pressure induced {alpha}-{omega} phase transition in zirconium

Compressional and shear wave velocities as well as unit-cell volumes across the {alpha}-{omega} transition of Zr have been measured up to 10.5 GPa at room temperature using ultrasonic interferometry in conjunction with synchrotron x radiation. In the pressure range of 5.0 to 6.2 GPa, a mixture of {alpha} and {omega} phase is clearly identified and the {alpha} phase is completely transformed to {omega} phase at 6.8 GPa. The measured velocity jumps across the {alpha}-{omega} transition are 9.6% and 13.1% for P and S waves, respectively. Negative pressure dependence for the shear modulus of {alpha}-Zr has been found at pressures from 1.4 to 2.9 GPa, which may be ascribed to the shear instability of the {alpha} phase prior to transition. According to velocity data, the onset pressure of the {alpha}-{omega} transition is determined to be {approx}4.0 GPa.

36 MATERIALS SCIENCE↗

Role of fluorine in plasma nitridated ZrO{sub 2} thin films under irradiation

The role of fluorine in plasma-nitridated ZrO{sub 2} thin films under electron irradiation is investigated in situ by real-time high-resolution transmission electron microscopy. Fluorine and nitrogen codoping can suppress the microstructure evolution during electron beam bombardment and the corresponding origin is probed and verified. The results obtained by irradiation with an ultraviolet laser show that plasma fluorination can effectively remove the dissociative N or O particles in the ZrO{sub 2} thin films which can escape from the interstitial sites under electron irradiation. The mechanism of the irradiation stability of the F and N codoped ZrO{sub 2} thin film is also discussed.

36 MATERIALS SCIENCE↗

Anomalous high-pressure behavior of amorphous selenium from synchrotron x-ray diffraction and microtomography.

The high-pressure behavior of amorphous selenium has been investigated with time-resolved diamond anvil cell synchrotron x-ray diffraction and computed microtomography techniques. A two-step dynamic crystallization process is observed in which the monoclinic phase crystallized from the amorphous selenium and gradually converted to the trigonal phase, thereby explaining previously observed anomalous changes in electrical conductivity of the material under pressure. The crystallization of this elemental system involves local topological fluctuations and results in an unusual pressure-induced volume expansion. The metastability of the phases involved in the transition accounts for this phenomenon. The results demonstrate the use of pressure to control and directly monitor the relative densities and energetics of phases to create new phases from highly metastable states. The microtomographic technique developed here represents a method for determination of the equations of state of amorphous materials at extreme pressures and temperatures.

43 PARTICLE ACCELERATORS↗