Engineering Papers⌕ Search

Engineering topics

Ren, Yang

Publications and source records attributed to Ren, Yang.

At least 307 records · Page 17

On the unusual amber coloration of nanoporous sol-gel processed Al-doped silica glass: An experimental study

Silica is the most abundant component on the earth’s surface. It plays an important role in many natural processes. Silica is also a critical material for a wide range of technical applications such as in optics and electronics. In this work, we discuss our recent experimental observation of the unusual amber coloration of aluminum doped sol-gel glass that has not been reported in the past. We characterized Al-doped sol-gel glasses, prepared at different sintering temperature, using a plethora of techniques to investigate the origin of this unusual coloration and to understand their structural and chemical properties. We used these experimental results to test a number of possible coloring mechanisms. The results suggested this coloring is likely caused by temperature-dependent aluminum-associated defect centers associated with different amorphous-to-crystalline ratios of the annealed sol-gel silica glass structures.

Science & Technology - Other Topics↗

Amorphous and crystalline TiO 2 nanoparticle negative electrodes for sodium-ion batteries

Titanium dioxide (TiO 2 ) is a promising negative electrode for sodium ion batteries (SIBS). Although TiO 2 materials with amorphous (A-TiO 2 ) and single-phase crystalline structures (C-TiO 2 ) have been separately explored, the study to compare the fundamental electrochemistry of A-TiO 2 and C-TiO 2 is limited. In this work, we investigated A-TiO 2 and C-TiO 2 nanoparticles with identical chemical composition and morphology. C-TiO 2 exhibits enhanced electrochemical performance than A-TiO 2 in terms of rate capability and cycle life. Cyclic voltammetry (CV) analysis suggests reversible Na ion insertion/extraction in C-TiO 2 . However, such process is irreversible in the case of A-TiO 2 . The charge storage mechanisms in both samples were studied to show that diffusion-controlled intercalation process becomes significant in C-TiO 2 sample. The C-TiO 2 sample has a better Na + diffusivity measured through the galvanostatic intermittent titration technique (GITT) compared to A-TiO 2 , which corroborates well with the rate capability study. Furthermore, the evolution of local structure of the TiO 2 samples was analyzed by ex situ pair distribution function (PDF) to understand the variation in electrochemical properties. In conclusion, it reveals that the corner-shared Ti-Ti distance along Na ion diffusion pathway increases with the increase of crystallinity, leading to the expanded diffusion channels and therefore more active sites and faster diffusion.

25 ENERGY STORAGE↗

Development of Fe100-(NiCoMn) magnetostrictive alloys with good mechanical properties

In this work, a series of Fe 100-x (NiCoMn) x (13 <= x <= 45, at.%) cast alloys are developed. The mechanical properties and magnetostriction are intimately related to the phase constituent and crystal structure of these alloys. In the body-centered-cubic phase region (x < 25), the magnetostriction and tensile strength are increasing monotonically with increasing x value, both of which drop when the face-centered-cubic phase appears. The crystallography relationship between the face-centered-cubic and body-centered-cubic phase satisfies the Kurdjumov-Sachs relationship. In Fe- 75 (NiCoMn) 25 polycrystalline alloy, a magnetostriction of 50 ppm with a tensile strength more than 1000 MPa is achieved. (C) 2019 Elsevier B.V. All rights reserved.

36 MATERIALS SCIENCE↗

Efficient blue light-emitting diodes based on quantum-confined bromide perovskite nanostructures

The emergence of inorganic–organic hybrid perovskites, a unique class of solution-processable crystalline semiconductors, provides new opportunities for large-area, low-cost and colour-saturated light-emitting diodes (LEDs) ideal for display and solid-state lighting applications1. However, the performance of blue perovskite LEDs (PeLEDs) is far inferior to that of their near-infrared, red and green counterparts, strongly limiting the practicality of the PeLED technology. Here, we demonstrate blue PeLEDs emitting at 483 nm with colour coordinates of (0.094, 0.184) and operating with a peak external quantum efficiency of up to 9.5% at a luminance of 54 cd m –2 . The devices have a T50 lifetime of 250 s for an initial brightness of 100 cd m –2 . The efficient blue electroluminescence originates from a structure of quantum-confined perovskite nanoparticles embedded within quasi-two-dimensional phases with higher bandgaps, prepared by an antisolvent processing scheme. Our work paves the way towards high-performance PeLEDs in the blue region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evidence for a short-range chemical order of Ge atoms and its critical role in inducing a giant magnetocaloric effect in Gd 5 Si 1.5 Ge 2.5

Crystal structure and magnetic properties of Gd 5 Si 1.5 Ge 2.5 and Gd 4.9 Zr 0·1 Si 1.5 Ge 2.5 were investigated using high-energy X-ray diffraction and magnetic measurements. Results showed that a Zr substitution for 2% Gd reduces unit cell volumes of a room-temperature monoclinic and a low-temperature orthorhombic lattice and a difference between them at a magnetostructural transition. At a microscopic level, the Zr substitution increases length of disconnected interlayer T–T bonds of the monoclinic lattice at the expense of length of connected interlayer T–T bonds (T = Si, Ge). These opposing changes of the interlayer T–T bonds provided evidence for existence of a short-range chemical order of Ge atoms in lattices of Gd 5 Si 1.5 Ge 2.5 and its weakening by the Zr substitution. Magnetic measurements revealed that the Zr substitution brings about a change of the magnetic structure and a reduction of a giant magnetocaloric effect of Gd 5 Si 1.5 Ge 2.5 . Based on such structural and magnetic changes due to the Zr substitution, we propose a relation between the short-range chemical order and the total entropy change at the magnetostructural transition. Finally, using this relation, a giant magnetocaloric effect and an annealing effect observed over a wide range of Gd 5 (Si,Ge) 4 composition can be explained quantitatively.

36 MATERIALS SCIENCE↗

Multiple contributions to electrostrain in high performance PbTiO 3 –Bi(Ni 1/2 Hf 1/2 )O 3 piezoceramics triggered by phase transformation

Piezoelectric materials, which mechanically respond to electrical stimulation and vice versa, typically exhibit high piezoelectricity at a morphotropic phase boundary (MPB). A thorough structural description is essential for understanding the origin of excellent piezoelectric properties. In this work, a comparative study of electric-field-driven structure and phase evolution has been conducted on MPB and non-MPB tetragonal composition in high performance system of PbTiO 3 -Bi(Ni 1/2 Hf 1/2 )O 3 piezoceramics using in situ high-energy synchrotron X-ray diffraction. The results show that the MPB composition exhibits electric-field-driven reversible tetragonal-to-monoclinic transformation, whereas non-MPB composition does not. Direct evidence shows that the extensive phase transformation triggers multiple contributions to enhancing piezoelectric performance. Namely, it not only enables the unit cell parameters of coexisting phases easily change with an external electric field, but also enhances the domain switching and lattice strain. These results offer a unique perspective on MPB associated piezoelectricity enhancement, and will be helpful for developing high performance piezoelectric materials.

36 MATERIALS SCIENCE↗

Confined seeds derived sodium titanate/graphene composite with synergistic storage ability toward high performance sodium ion capacitors

Sodium ion capacitors (SICs) are increasingly being focused, due to the feature of high energy/power densities derived from the integrated energy storage mechanisms, as well as the ubiquitous sodium sources. Practical anodes with exceptional rate capability can circumvent the kinetic mismatch with cathode, boosting energy/power metrics. Herein, a Na 2 Ti 7 O 15 nanowire/graphene anode is synthesized through an atomic layer deposition (ALD) seeding technique, by which the confined seeds enable Na 2 Ti 7 O 15 with ultra-high aspect ratio and interweaved structure with graphene nanosheets. The composite delivers a superior rate capability of 60 mAh g –1 at a high rate of 17.7 A g –1 , and an exceptional cyclic stability of 90% retention after 10 000 cycles even at 8.85 Ag –1 . It is demonstrated that the morphology, graphene platform, intrinsically low energy diffusion barrier of Na 2 Ti 7 O 15 , and associated reaction mechanism synergize the electron transport, sodium ion migration, and surface capacitive contribution, giving rise to such a decent electrochemical performance. The SICs deliver high energy/power densities (82.7 Wh kg –1 /97.5 W kg –1 , 25 kW kg –1 with 16 Wh kg –1 retained), proving a promise particularly at extremely fast charge/discharge condition. The proposed ALD seeding technique can be developed into a technical strategy for synthesizing high performance energy storage materials.

25 ENERGY STORAGE↗

In-Situ Synchrotron X-ray Computed Microtomography and Diffraction Investigation of Deformation and Fracture Behavior in a Laser Powder Bed Fusion Processed 316L Stainless Steel

Introduce defects into laser powder bed fusion stainless steel samples by controlling processing parameters. Perform in-situ x-ray microtomography on L-PBF stainless steel samples during plastic deformation. Relate defect characteristics and evolution to tensile behavior. Understand how processing conditions translate to initial defect characteristics. Track and evaluate defect evolution as a function of plastic deformation. Determine how deformation and fracture mechanics change as a result of AM defects.

36 MATERIALS SCIENCE↗

Unraveling the Origins of the “Unreactive Core” in Conversion Electrodes to Trigger High Sodium-Ion Electrochemistry

Electrochemical storage via conversion reactions in crystalline electrode materials critically rests upon the sizes of the guest ions. Here we report an unusual behavior that renders CuO inactive in the process of sodium-ion insertion with a synergistic combination of a variety of synchrotron X-ray microscopic, spectroscopic, and structural probes. We reveal that the "unreactive core" formation is closely associated with the microstructural integrity of battery active materials. In light of these findings, we also demonstrate that this undesirable process can be inhibited by the materials' microstructural design to trigger the potential of high electrochemical properties.

25 ENERGY STORAGE↗

Magnetic field-induced magnetostructural transition and huge tensile superelasticity in an oligocrystalline Ni–Cu–Co–Mn–In microwire

Meta-magnetic shape-memory alloys combine ferroelastic order with ferromagnetic order and exhibit attractive multifunctional properties, but they are extremely brittle, showing hardly any tensile deformability, which impedes their practical application. Here, for the first time, an Ni–Cu–Co–Mn–In microwire has been developed that simultaneously exhibits a magnetic field-induced first-order meta-magnetic phase transition and huge tensile superelasticity. A temperature-dependent in situ synchrotron high-energy X-ray diffraction investigation reveals that the martensite of this Ni 43.7 Cu 1.5 Co 5.1 Mn 36.7 In 13 microwire shows a monoclinic six-layered modulated structure and the austenite shows a cubic structure. This microwire exhibits an oligocrystalline structure with bamboo grains, which remarkably reduces the strain incompatibility during deformation and martensitic transformation. As a result, huge tensile superelasticity with a recoverable strain of 13% is achieved in the microwire. This huge tensile superelasticity is in agreement with our theoretical calculations based on the crystal structure and lattice correspondence of austenite and martensite and the crystallographic orientation of the grains. Owing to the large magnetization difference between austenite and martensite, a pronounced magnetic field-induced magnetostructural transition is achieved in the microwire, which could give rise to a variety of magnetically driven functional properties. For example, a large magnetocaloric effect with an isothermal entropy change of 12.7 J kg -1 K -1 (under 5 T) is obtained. The realization of magnetic-field- and tensile-stress-induced structural transformations in the microwire may pave the way for exploiting the multifunctional properties under the coupling of magnetic field and stress for applications in miniature multifunctional devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the Atomic Origin of Heterogeneous Li-Ion Diffusion by Probing Na

Tracing the dynamic process of Li-ion transport at the atomic scale is a long-cherished wish in solid state ionics and essential for battery material engineering. Approaches via phase change, strain, and valence states of redox species are developed to circumvent the technical challenge of direct imaging Li, however, all are limited by poor spatial resolution and weak correlation with state-of-charge (SOC). Here, we adopt an ion-exchange approach by sodiating the de-lithiated cathode and probing Na distribution to trace the Li de-intercalation, which enables us to visualize the heterogeneous Li-ion diffusion down to atomic level. In the model LiNi1/3Mn1/3Co1/3O2 cathode, dislocation-mediated ion diffusion is kinetically favorable at low SOC and planar diffusion along (003) layers dominates at high SOC, which work synergistically to determine the ion diffusion dynamics. Our work unveils the heterogeneous nature of ion diffusion in battery material and stresses the role of defect engineering in tailoring ion transport kinetics.

Xiao, Biwei↗

High pO(2) Floating Zone Crystal Growth of the Perovskite Nickelate PrNiO3

Single crystals of PrNiO3 were grown under an oxygen pressure of 295 bar using a unique high-pressure optical-image floating zone furnace. The crystals, with volume in excess of 1 mm(3), were characterized structurally using single crystal and powder X-ray di ff raction. Resistivity, specific heat, and magnetic susceptibility were measured, all of which evidenced an abrupt, first order metal-insulator transition (MIT) at similar to 130 K, in agreement with previous literature reports on polycrystalline specimens. Temperature-dependent single crystal di ff raction was performed to investigate changes through the MIT. Our study demonstrates the opportunity space for high fugacity, reactive environments for single crystal growth specifically of perovskite nickelates but more generally to correlated electron oxides.

floating zone method↗

Colossal Elastocaloric Effect in Ferroelastic Ni-Mn-Ti Alloys

Energy-efficient and environment-friendly elastocaloric refrigeration, which is a promising replacement of the conventional vapor-compression refrigeration, requires extraordinary elastocaloric properties. Hitherto the largest elastocaloric effect is obtained in small-size films and wires of the prototype NiTi system. Here, we report a colossal elastocaloric effect, well exceeding that of NiTi alloys, in a class of bulk polycrystalline NiMn-based materials designed with the criterion of simultaneously having large volume change across phase transition and good mechanical properties. The reversible adiabatic temperature change reaches a strikingly high value of 31.5 K and the isothermal entropy change is as large as 45 J kg –1 K –1 . The achievement of such a colossal elastocaloric effect in bulk polycrystalline materials should push a significant step forward towards large-scale elastocaloric refrigeration applications. As a result, our design strategy may inspire the discovery of giant caloric effects in a broad range of ferroelastic materials.

36 MATERIALS SCIENCE↗

Towards an integrated experimental and computational framework for large-scale metal additive manufacturing

In this work using the Metal Big Area Additive Manufacturing (MBAAM) system, a thin steel wall was manufactured from a low carbon steel wire. The wall was then characterized comprehensively by high-throughput high-energy X-ray diffraction (HEXRD), electron backscatter diffraction (EBSD), and in-situ HEXRD tensile tests. With the predicted temperature histories from the finite element-based additive manufacturing process simulations, the correlations between processing parameters, microstructure, and properties were established. The correlation between the final microstructure with the predicted temperature history is well explained with the material's continuous cooling transformation (CCT) diagram calculated based on the composition of the low carbon steel wire. The final microstructure is dependent on the cooling rate during austenite to ferrite/bainite transformation during initial cooling and the subsequent reheating cycles. Fast cooling rate resulted in small ferrite grain size and fine bainite structure at the location closest to the base plate. Slower cooling rate at the side wall location and repeated reheating cycles to the ferrite-pearlite regions resulted in all allotriomorphic (equiaxed) ferrite with medium grain size with small amount of pearlite. With no reheating cycles, the top location has the slowest cooling rate and a large grained allotriomorphic ferrite and bainitic structures. The measured mechanical strength is then related to the microstructural feature size (grain or lath size) observed in those locations. Thus, a good correlation is found between the mechanical properties, microstructure features and the temperature history at various locations of the printed wall.

36 MATERIALS SCIENCE↗

Direct observation of MgO formation at cathode electrolyte interface of a spinel MgCo 2 O 4 cathode upon electrochemical Mg removal and insertion

Identifying a Mg 2+ insertion mechanism into Mg cathode is one crucial challenge of designing Mg batteries that own comparable specific energy to the lithium ion systems. Spinel Mg cathodes are attractive candidates mainly attributed to its high intercalation voltage and theoretical capacity, however, electrochemically removing Mg from its solid structure with identified capacity dedicated to actual reversible Mg intercalation introduce complications. Work presented here applies Scanning/Transmission Electron Microscopy with Energy Loss Spectroscopy and diffraction method to investigate the cathode electrolyte interface for a spinel MgCo 2 O 4 material electrochemically cycled in the presence of a non-aqueous, low water content Mg electrolyte. Findings at an atomic scale suggest a complete de-magnesiation is occurring for thin MgCo 2 O 4 particles upon electrochemical charging, but a vast majority of MgCo 2 O 4 shows formation of an amorphous MgO layer with a thickness of similar to ~10 nm at the cathode electrolyte interface. The amorphous MgO layer is directly jointed with the crystalline MgCo 2 O 4 at the outer edge of the cathode. Formation of MgO at the cathode electrolyte interface is believed to be the detrimental factor preventing further electrochemical cell cycling of MgCo 2 O 4 . A possible reaction pathway of intercalation-initiated surface conversion is proposed to explain reversible Mg insertion with MgCo 2 O 4 .

25 ENERGY STORAGE↗

Thermal Expansion and Magnetostriction of Laves-Phase Alloys: Fingerprints of Ferrimagnetic Phase Transitions

The magneto–elastic coupling effect correlates to the changes of moment and lattice upon magnetic phase transition. Here, we report that, in the pseudo-binary Laves-phase Tb 1-x Dy x Co 2 system (x = 0.0, 0.7, and 1.0), thermal expansion and magnetostriction can probe the ferrimagnetic transitions from cubic to rhombohedral phase (in TbCo 2 ), from cubic to tetragonal phase (in DyCo 2 ), and from cubic to rhombohedral then to tetragonal phase (in Tb 0.3 Dy 0.7 Co 2 ). Furthermore, a Landau polynomial approach is employed to qualitatively investigate the thermal expansion upon the paramagnetic (cubic) to ferrimagnetic (rhombohedral or tetragonal) transition, and the calculated thermal expansion curves agree with the experimental curves. Our work illustrates the correlation between crystal symmetry, magnetostriction, and thermal expansion in ferrimagnetic Laves-phase alloys and provides a new perspective to investigate ferrimagnetic transitions.

36 MATERIALS SCIENCE↗

Enhanced tetragonality and large negative thermal expansion in a new Pb/Bi-based perovskite ferroelectric of (1 – x )PbTiO 3 – x Bi(Zn 1/2 V 1/2 )O 3

The investigation of a large negative thermal expansion (NTE) over a wide temperature range has been a vital subject in materials science, since the overall coefficient of thermal expansion (CTE) of ordinary materials can be effectively tailored by the introduction of NTE materials. Here, we successfully achieved a large NTE within a broad temperature range in a new Pb/Bi-based ferroelectric of (1 – x)PbTiO 3 –xBi(Zn 1/2 V 1/2 )O 3 by means of improving the ferroelectricity of PbTiO 3 . The current system exhibits an unusual enhanced tetragonality, large spontaneous polarization (P S ), and high Curie temperature (T C ). Specifically, the x = 0.1 compound exhibits an enhanced CTE of –2.10 × 10 –5 °C –1 from room temperature (RT) up to its T C of 600 °C, which is in contrast to that of pristine PbTiO 3 (–1.99 × 10 –5 °C –1 , RT–490 °C). More intriguingly, a large volume shrinkage (ΔV ≈ –1%) has also been observed during the ferroelectric-to-paraelectric phase transition. According to experimental and theoretical studies, the large NTE is attributed to the enhanced P S derived from the strong hybridization of Pb/Bi–O and Ti/Zn/V–O through the substitution of the polar Bi(Zn 1/2 V 1/2 )O 3 perovskite. The present study demonstrates that a large NTE within a wide temperature range can be achieved in PbTiO 3 -based ferroelectrics by improving its ferroelectricity through introducing isostructural polar perovskites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗