Engineering Papers⌕ Search

Engineering topics

Ren, Yang

Publications and source records attributed to Ren, Yang.

At least 289 records · Page 16

Total-scattering pair-distribution function analysis of zinc from high-energy synchrotron data

The crystal structure of zinc metal deviates from the ideal hexagonal close packing structure by a significantly increased axial ratio (c/a). The local atomic structure of zinc metal is investigated using the total scattering atomic pair distribution function (PDF) analysis based on X-ray powder diffraction data collected at ambient conditions. The X-ray total scattering PDF analysis confirms that the crystal structure of zinc can be described in terms of wurtzite structure, but with an anomalously atomic displacement parameters U 33 , indicating a significant displacement disorder along the c-axis. For the long r-range PDF refinements, the thermal motion of zinc shows a notable anisotropy as expressed by the ratio U 33 /U 11 of 2.5 at ambient conditions. This average distortion level along the c-axis, was not reflected locally for the features below 5.0 Å as it fits the high r region. Based on PDF refinements over different r-ranges, we measure an interesting increase of the U 33 value with decreasing the r-range of the refinement. Finally, this suggests that the local structure features in zinc metal differ from the average structure ones.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation between manganese dissolution and dynamic phase stability in spinel-based lithium-ion battery

Historically long accepted to be the singular root cause of capacity fading, transition metal dissolution has been reported to severely degrade the anode. However, its impact on the cathode behavior remains poorly understood. Here we show the correlation between capacity fading and phase/surface stability of an LiMn 2 O 4 cathode. It is revealed that a combination of structural transformation and transition metal dissolution dominates the cathode capacity fading. LiMn 2 O 4 exhibits irreversible phase transitions driven by manganese(III) disproportionation and Jahn-Teller distortion, which in conjunction with particle cracks results in serious manganese dissolution. Meanwhile, fast manganese dissolution in turn triggers irreversible structural evolution, and as such, forms a detrimental cycle constantly consuming active cathode components. Furthermore, lithium-rich LiMn 2 O 4 with lithium/manganese disorder and surface reconstruction could effectively suppress the irreversible phase transition and manganese dissolution. These findings close the loop of understanding capacity fading mechanisms and allow for development of longer life batteries.

25 ENERGY STORAGE↗

Giant negative thermal expansion at the nanoscale in the multifunctional material G d 5 ( Si , Ge ) 4

In this work the thermal expansion of Gd 5 Si 1.3 Ge 2.7 magnetic nanogranules was studied. A crossover from positive (macro- and microscale in the literature) towards a negative thermal expansion (at nanoscale) is observed. The negative thermal expansion (NTE) behavior was found in two temperature windows: 90-160 K ($β^{LT}$ similar to-32.2 ppm K -1 ), and within the room temperature 255-340 K, where a giant NTE was observed (-69 ppm K -1 ). The key atomic mechanism driving the NTE is identified as an atomic triplet-chain flexibility. The results suggest that the NTE behavior emerges as a size-reduction effect caused by the intrinsic nanoparticles surface pressure (estimated at 11 kbar), leading to the positive thermal expansion-NTE crossover at the nanoscale.

36 MATERIALS SCIENCE↗

An advanced high energy-efficiency rechargeable aluminum-selenium battery

We report that aluminum-ion batteries (AIBs) are considered as a promising alternative to traditional rechargeable batteries due to their high theoretical capacity, low cost, and multivalent-ion/multi-electron transfer, but are hindered from commercialization by the lack of suitable cathode materials. Herein, an aluminum-selenium (Al-Se) battery that operates at room temperature with high energy efficiency is reported. This Al-Se battery exhibits high selenium utilization with a discharge capacity of 607 mAh g -1 , a reduced overpotential, and high volumetric capacity for over 100 cycles. Furthermore, ex-situ spectroscopic and microscopic investigations of the Se cathodes indicated the existence of an aluminum selenide component as the discharge product. Additionally, in-situ transmission electron microscopy provided not only insights into understanding the Al-Se electrochemistry, but also a real-time characterization technique to evaluate the electrochemistry of AIBs in general.

25 ENERGY STORAGE↗

Temperature-Dependent Structural Evolution in Au 44 Ga 56 Liquid Eutectic Alloy

We report that temperature-dependent short-range structural evolution of Au 44 Ga 56 liquid eutectic alloy has been studied by in situ extended X-ray absorption fine structure (EXAFS), in situ high-energy X-ray diffraction (HEXRD) together with first-principles molecular dynamics (FPMD) simulations. It is found that the short-range structure of Au 44 Ga 56 liquid strongly inherits the local atomic packing of the AuGa compound. A short-range structural change in Ga-centered clusters is revealed by in situ EXAFS data at the Ga K-edge at about 970 K, while no such change in Au-centered clusters appears at the Au L-III-edge. The in situ HEXRD and FPMD simulations also confirm the existence of a liquid-to-liquid crossover (LLC) in the Au 44 Ga 56 liquid at a temperature range of about 1000-1100 K, mainly lying in the local structural change around Ga atoms. Indeed, the alloys quenched from the liquid phases below 1000 K and above 1100 K exhibit differences in structure and magnetic properties, which opens a possibility to fabricate new materials with different structures and properties in LLC-containing alloys.

36 MATERIALS SCIENCE↗

Evaluation of the Microstructure and Property of TiNi SMA Prepared using VIM in BaZrO3 Crucible

The contamination from the crucible has been recognized as the main drawback of using vacuum induction melting (VIM) method to prepare TiNi shape memory alloys (SMAs). In the present work, we evaluated the feasibility of utilizing the highly-stable BaZrO3 crucible to prepare TiNi SMAs, whose microstructure and mechanical properties were investigated by High-energy X-ray Diffraction (HE-XRD), analytical Transmission Electron Microscopy (TEM), Differential Scanning Calorimetry (DSC) and tensile test. It was found that there were about 0.035 wt % oxygen and 0.039 wt % zirconium remained in the TiNi alloy after melting in BaZrO3 crucible, which fulfills the ASTM standard on biomedical TiNi alloys. Oxygen from the dissolution of BaZrO3 could form Ti4Ni2Ox phase, and zirconium exists as solute atoms in both of the matrix and second phase. After the thermomechanical processing and vacuum annealing at 850 degrees C, the alloy achieved 37.63% of fracture elongation and 880 MPa of tensile strength. The transformational strain and martensitic yield strain of the alloy reached about 8% and 21% respectively.

Gao, Pengyue↗

Evolution of Defect Properties and Texture During Tensile Deformation of Additively Manufactured 316L Stainless Steel Using In-situ Synchrotron X-ray Computed Microtomography and Diffraction

The ability of Additive Manufacturing to create complex 3D objects has attracted the attention of a wide variety of industries [1]. This in turn has led to detailed studies investigating the relationship between AM processing parameters and final part characteristics such as porosity and texture [2]. However little research has been done to study the effects of these subsequent characteristics on these parts’ performance [3]. In this study, 316L stainless steel samples were additively manufactured to have common AM defects. The samples were deformed plasticly while undergoing in-situ microtomography and diffraction measurements.

36 MATERIALS SCIENCE↗

A eutectic dual-phase design towards superior mechanical properties of heusler-type ferromagnetic shape memory alloys

Heusler-type ferromagnetic shape memory alloys possess attractive multifunctional properties, including magnetic field induced shape memory effect, magnetoresistance and magnetocaloric effect, owing to the unique concurrent magnetic and martensitic transformations. However, these intermetallics generally exhibit intrinsic high brittleness and low strength, which severely impede their workability for processing and applicability in real use. In this study, we demonstrate a new grain refining strategy by means of eutectic solidification to improve the mechanical properties in Ni-Mn-Sn-Fe alloys. In a fully eutectic microstructure, the average γ lamellae thickness was refined to ~170 nm and the composite showed a compressive strength of 1950 MPa, ductility of 19.5%, Young’s Modulus of 38 GPa, pseudoelasticity of 3.2% and high mechanical cyclic stability. The high mechanical performance is attributed to the effect of departmentalization of the brittle Heusler alloy by the densely distributed γ phase fine lamellae in resisting crack propagation. The eutectic Heusler composite exhibited a metamagnetic phase transformation, with a magnetic entropy change of 10.2 J/kg·K and a refrigeration capacity of 168 J/kg in a field change of 5 T.

36 MATERIALS SCIENCE↗

Effect of α/β Forging on Microstructure and Texture Inhomogeneity in a Ti-1023 Forged Disk

The microstructure and texture distribution of a Ti-1023 forged disk were investigated by scanning electron microscopy and synchrotron-based high-energy X-ray diffraction. The finite element method was used to simulate temperature and strain distribution in order to investigate the relationship of the α/β forging process with microstructure and texture distribution. A bimodal microstructure and rolling textures with large inhomogeneity were observed in the disk. A plate-like and a necklace-like morphology and volume fraction variations of the primary α phase were observed in different regions with different forging conditions, such as temperature, deformation, position, and high density of flow lines. Texture sharpness distribution of the β phase was in good agreement with the strain distribution, which suggests deformation may play the most important part in the texture inhomogeneity. A weak cube texture was obtained near the center of the disk, and fiber textures were found near the rim of the disk. The primary a phase also exhibited a transverse texture, which is favored by large deformation.

36 MATERIALS SCIENCE↗

Reentrant glass transition leading to ultrastable metallic glass

Polyamorphs are often observed in amorphous matters, and a representative example is the reentrant glass transition in colloid systems. For metallic amorphous alloys, however, the cases reported so far are limited to metallic glasses (MGs) that undergo electronic transitions under gigapascal applied pressure, or the presence of two liquids at the same composition. In this paper, we report the first observation of a reentrant glass transition in MGs. This unusual reentrant glass transition transforms an MG from its as-quenched state (Glass I) to an ultrastable state (Glass II), mediated by the supercooled liquid of Glass I. Specifically, upon heating to above its glass transition temperature under ambient pressure, Glass I first transitions into its supercooled liquid, which then transforms into a new Glass II, accompanied by an exothermic peak in calorimetric scan, together with a precipitous drop in volume, electrical resistance and specific heat, as well as clear evidence of local structural ordering on the short-to-medium-range scale revealed via in-situ synchrotron X-ray scattering. Atomistic simulations indicate enhanced ordering of locally favored motifs to establish correlations in the medium range that resemble those in equilibrium crystalline compounds. The resulting lower-energy Glass II has its own glass transition temperature higher than that of Glass I by as much as 50 degrees. This route thus delivers a thermodynamically and kinetically ultrastable MG that can be easily retained to ambient conditions.

36 MATERIALS SCIENCE↗

Engineering medium-range order and polyamorphism in a nanostructured amorphous alloy

Like crystalline materials, the properties of amorphous materials can be tailored by tuning the local atomic-to-nanoscale structural configurations. Polyamorphism is evident by the coexistence of kinetically stabilized amorphous structures with tailorable short-to-medium-range orders, providing a viable means to engineer the degree of local order and heterogeneity. Here, we report experimental evidence of the coexistence of liquid-like and solid-like amorphous phases in a Ni82P18 amorphous alloy with enhanced thermal stability and plasticity prepared by pulsed electrodeposition. The two amorphous phases, of comparable volume fraction of ~50% each, have similar short-range order but are distinguished by packing at the medium-range length scale (>6 Å). Upon heating, a structure crossover at ~450 K was observed, where the liquid-like structure transforms to the solid-like structure, as evidenced by the enthalpy release and an anomalous contraction of atomic structure over the medium-range length scale, due to the metastable nature of the liquid-like structure.

36 MATERIALS SCIENCE↗

“Lattice Strain Matching”‐Enabled Nanocomposite Design to Harness the Exceptional Mechanical Properties of Nanomaterials in Bulk Forms

Abstract Nanosized materials are known to have the ability to withstand ultralarge elastic strains (4–10%) and to have ultrahigh strengths approaching their theoretical limits. However, it is a long‐standing challenge to harnessing their exceptional intrinsic mechanical properties in bulk forms. This is commonly known as “the valley of death” in nanocomposite design. In 2013, a breakthrough was made to overcome this challenge by using a martensitic phase transforming matrix to create a composite in which ultralarge elastic lattice strains up to 6.7% are achieved in Nb nanoribbons embedded in it. This breakthrough was enabled by a novel concept of phase transformation assisted lattice strain matching between the uniform ultralarge elastic strains (4–10%) of nanomaterials and the uniform crystallographic lattice distortion strains (4–10%) of the martensitic phase transformation of the matrix. This novel concept has opened new opportunities for developing materials of exceptional mechanical properties or enhanced functional properties that are not possible before. The work in progress in this research over the past six years is reported.

Zhang, Junsong↗

Controllable thermal expansion and magnetic structure in Er 2 (Fe,Co) 14 B intermetallic compounds

The control of thermal expansion is attractive but remains challenging for the studies of negative thermal expansion materials. Here, we report a continuously controllable thermal expansion from negative to positive by means of adjusting the magnetic moment of Fe in Er 2 (Fe,Co) 14 B intermetallic compounds. Interestingly, a zero thermal expansion (ZTE) has been achieved in a wide temperature range (ΔT = 355 K), which is larger than most existing ZTE alloys. The spontaneous magnetostriction (ω S ) reveals a negative contribution arising from the magneto-volume effect to the controllable thermal expansion. The present study could be suitable for the design of controllable thermal expansion of other alloys related to the magneto-volume effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly crystalline sodium manganese ferrocyanide microcubes for advanced sodium ion battery cathodes

The microstructure and morphology of the crystal play an important role in the physical and electrochemical properties of electrode materials. Here we report a highly crystalline microcube structure of Na-rich Prussian white Na 1.92 Mn[Fe(CN) 6 ] 0.98 for sodium ion battery cathodes. The obtained structure features high crystallinity of the monoclinic structure with an average cubic size of 3–5 μm. Because of the improvement on microstructural and electrical properties, the cathode design enables promising electrochemical performance. The electrode exhibits an outstanding rate performance with reversible capacities of 152.8 mA h g –1 (10 mA g –1 ), 128.1 mA h g –1 (100 mA g –1 ), 118.7 mA h g –1 (500 mA g –1 ) and 110.3 mA h g –1 (1000 mA g –1 ). It also exhibits a good cycling performance with a capacity retention of 82% after 500 cycles at 100 mA g –1 . More importantly, the XRD analysis reveals a highly reversible monoclinic–cubic–monoclinic structural evolution of the cathode upon Na + extraction/insertion. The good rate and cycling performance can be attributed to the robust crystal structure with few defects and fast Na + transfer kinetics. The high purity single crystal morphology can also reduce the side reactions on the electrode/electrolyte interface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrogen embrittlement behaviors of additive manufactured maraging steel investigated by in situ high-energy X-ray diffraction

The microstructures and mechanical properties of additively manufactured (AM) maraging steel were investigated before and after hydrogen charging. The hydrogen-charged specimen suffers severe hydrogen embrittlement and its strength and plasticity decline obviously. The mechanism of ductile-to-brittle transition of AM maraging steel after hydrogen charging was studied by in situ high energy X-ray diffraction and electron backscatter diffraction techniques. Martensitic transformation occurs in the hydrogen-charged specimen under low stress. The premature phase transformation along with hydrogen-induced microcracks resulting in the brittle fracture of the hydrogen-charged specimen.

36 MATERIALS SCIENCE↗