Engineering Papers⌕ Search

Engineering topics

Nikolic, Rebecca J.

Publications and source records attributed to Nikolic, Rebecca J..

At least 19 records

Liquid semiconductor-halogen based electronics

According to one embodiment, a device includes a first electrode, a second electrode spaced from the first electrode, a well extending between the first electrode and the second electrode, one or more chalcogens in the well, and at least one halogen mixed with the one or more chalcogens in the well. In addition, the chalcogens are selected from the group consisting of sulfur, selenium, tellurium, and polonium.

Voss, Lars↗

Metal-based passivation-assisted plasma etching of III-v semiconductors

According to one embodiment, a method includes performing a plasma etching process on a masked III-V semiconductor, and forming a passivation layer on etched portions of the III-V semiconductor. The passivation layer includes at least one of a group III element and/or a metal from the following: Ni, Cr, W, Mo, Pt, Pd, Mg, Ti, Zr, Hf, Y, Ta, and Sc.

Harrison, Sara Elizabeth↗

Three dimensional vertically structured electronic devices

In one embodiment, a method of forming a vertical transistor includes forming a layer comprising a semiconductor material above a substrate, defining three dimensional (3D) structures in the layer, forming a second region in at least one vertical sidewall of each 3D structure, and forming an isolation region between the 3D structures. In another embodiment, an apparatus includes at least one vertical transistor, where the at least one vertical transistor includes: a substrate comprising a semiconductor material, an array of 3D structures above the substrate, and an isolation region positioned between the 3D structures. Each 3D structure includes the semiconductor material. Each 3D structure also includes a first region having a first conductivity type and a second region having a second conductivity type, the second region including a portion of at least one vertical sidewall of the 3D structure.

Conway, Adam↗

Three dimensional vertically structured electronic devices

According to one embodiment, an apparatus includes at least one vertical transistor, where the at least one vertical transistor includes: a substrate including a semiconductor material; an array of three dimensional (3D) structures above the substrate; and an isolation region positioned between the 3D structures. Each 3D structure includes the semiconductor material. Each 3D structure also includes a first region having a first conductivity type and a second region having a second conductivity type, where the second region includes a portion of at least one vertical sidewall of the 3D structure.

Conway, Adam↗

Gallidation assisted impurity doping

In one embodiment, a product includes a structure comprising a material of a Group-III-nitride having a dopant, where a concentration of the dopant in the structure has a concentration gradient characteristic of diffusion of the dopant inward from at least a portion of a surface of the structure in a direction substantially normal to the portion of the surface. The structure has less than 1% decomposition of the Group-III-nitride at the surface of the structure.

Voss, Lars↗

Three dimensional vertically structured MISFET/MESFET

According to one embodiment, an apparatus includes a substrate, and at least one three dimensional (3D) structure above the substrate. The substrate and the 3D structure each include a semiconductor material. The 3D structure also includes: a first region having a first conductivity type, and a second region coupled to a portion of at least one vertical sidewall of the 3D structure.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Demonstration of a Three-Dimensionally Structured Betavoltaic

In this work, we present a demonstration of a high-aspect ratio, three-dimensionally structured betavoltaic device. High-aspect ratio silicon PIN diodes were used as the semiconductor absorber and 147 PmCl 3 was used as the beta emitter. Three devices were fabricated with 147 Pm activities of 2.4 mCi, 7.4 mCi, and 29.5 mCi. The device with the highest activity produced an initial power output of 200 nW and was monitored over a period of 8 months to observe the current–voltage behavior over time, during which time the output current decreased in accordance with the radioactive half-life of 147 Pm. Small deviations in the output current of a few percent during the long-term measurement were found to be attributable to the humidity in the room where the experiment was done. Furthermore, the output current generated from the devices was 68–77% of the theoretical maximum, indicating significant infiltration of the radioisotope into the ridged structures.

42 ENGINEERING↗

Three dimensional radioisotope battery and methods of making the same

According to one embodiment, a product includes an array of three dimensional structures, where each of the three dimensional structure includes a semiconductor material; a cavity region between each of the three dimensional structures; and a first material in contact with at least one surface of each of the three dimensional structures, where the first material is configured to provide high energy particle and/or ray emissions.

07 ISOTOPE AND RADIATION SOURCES↗

Radiation tolerant microstructured three dimensional semiconductor structure

According to one embodiment, a product includes an array of three dimensional structures, a cavity region between each of the three dimensional structures, and a first material in contact with at least one surface of each of the three dimensional structures. In addition, each of the three dimensional structures includes a semiconductor material, where at least one dimension of each of the three dimensional structures is in a range of about 0.5 microns to about 10 microns. Moreover, the first material is configured to provide high energy particle and/or ray emissions.

25 ENERGY STORAGE↗

Design considerations for three-dimensional betavoltaics

Betavoltaic devices are suitable for delivering low-power over periods of years. Typically, their power density is on the order of nano to micro-Watts per cubic centimeter. In this work we evaluate the potential for using high-aspect ratio three-dimensional semiconductor structures to enhance the power and efficiency of these devices. The Monte Carlo transport code MCNP6 is used to provide realistic estimates of the theoretical levels of charge generation, which is in turn used to make predictions about the power output from three-dimensional betavoltaics. The focus of this work is on silicon and promethium-147, but other semiconductors and radioisotopes are considered as well. In the case of silicon diodes with three-dimensional features that are comparable to what is commercially available we estimate that power densities in the range of 20-25 mW/cm 3 can be achieved at efficiencies of 2.9-5.8% when coupled with promethium-147 oxide.

25 ENERGY STORAGE↗

Photogalvanic Etching of n -GaN for Three-Dimensional Electronics

Etching in wide-bandgap semiconductors such as GaN aids applications including transistors, sensors, and radioisotope batteries. Plasma-based etching can induce surface damage and contamination that is detrimental to device performance. Here, the present a photoelectrochemical approach to etching n -type GaN ( n -GaN) that is low-cost, simple, and environmentally benign compared to plasma approaches, with the potential for highly anisotropic etching that avoids material damage. n -GaN was etched in a dilute KOH solution with K 2 S 2 O 8 oxidizer, ultraviolet (UV) irradiation, and a catalytic metal mask which served as both photomask and counter electrode. Relatively smooth, highly anisotropic, non-defect-selective etching was achieved at rates in excess of 200 nm/min when etching at 65°C. The obstacle of bath acidification was circumvented using the addition of buffering salts to the etchant bath, substantially extending the etchant bath lifetime and etching depth achievable in a single, uninterrupted etch. These results represent a major step toward a scalable, device-ready electrochemical etch for vertical GaN structures and devices.

36 MATERIALS SCIENCE↗

Reliable electrical contacts for high power photoconductive switches

A photoconductive switch consisting of an optically actuated photoconductive material, e.g. a wide bandgap semiconductor such as SiC, situated between opposing electrodes. The electrodes are created using various methods in order to maximize reliability by reducing resistive heating, current concentrations and filamentation, and heating and ablation due to the light source. This is primarily accomplished by the configuration of the electrical contact geometry, choice of contacts metals, annealing, ion implantation, creation of recesses within the SiC, and the use of coatings to act as encapsulants and anti-reflective layers.

42 ENGINEERING↗

Rapid pulse annealing of CdZnTe detectors for reducing electronic noise

A combination of doping, rapid pulsed optical and/or thermal annealing, and unique detector structure reduces or eliminates sources of electronic noise in a CdZnTe (CZT) detector. According to several embodiments, methods of forming a detector exhibiting minimal electronic noise include: pulse-annealing at least one surface of a detector comprising CZT for one or more pulses, each pulse having a duration of .about.0.1 seconds or less. The at least one surface may optionally be ion-implanted. In another embodiment, a CZT detector includes a detector surface with two or more electrodes operating at different electric potentials and coupled to the detector surface; and one or more ion-implanted CZT surfaces on or in the detector surface, each of the one or more ion-implanted CZT surfaces being independently connected to one of the two or more electrodes and the surface of the detector. At least two of the ion-implanted surfaces are in electrical contact.

47 OTHER INSTRUMENTATION↗

Pillar-structured neutron detector based multiplicity system

This work demonstrates the potential of silicon pillars filled with boron-10 as a sensor technology for a compact and portable neutron multiplicity system. Solid-state, semiconductor based neutron detectors may enable completely new detector form factors, offer an alternate approach to helium-3 based systems, and reduce detector weight and volume requirements. Thirty-two pillar-structured neutron detectors were assembled into a system with an active area of over 20 cm 2 and were used in this work to demonstrate the feasibility of this sensor technology as a potential replacement for helium-3 based gas detectors. Multiplicity measurements were successfully carried out using a californium-252 neutron source, in which the source mass, system efficiency, and die-away time were determined. As a result, this demonstration shows that these solid-state detectors could allow for a more compact and portable system that could be used for special nuclear material identification in the field.

42 ENGINEERING↗

Ultradeep electron cyclotron resonance plasma etching of GaN

Here, ultradeep (≥5 μm) electron cyclotron resonance plasma etching of GaN micropillars was investigated. Parametric studies on the influence of the applied radio-frequency power, chlorine content in a Cl 2 /Ar etch plasma, and operating pressure on the etch depth, GaN-to-SiO 2 selectivity, and surface morphology were performed. Etch depths of >10 μm were achieved over a wide range of parameters. Etch rates and sidewall roughness were found to be most sensitive to variations in RF power and % Cl 2 in the etch plasma. Selectivities of >20:1 GaN:SiO 2 were achieved under several chemically driven etch conditions where a maximum selectivity of ~39:1 was obtained using a 100% Cl 2 plasma. The etch profile and (0001) surface morphology were significantly influenced by operating pressure and the chlorine content in the plasma. Optimized etch conditions yielded >10 μm tall micropillars with nanometer-scale sidewall roughness, high GaN:SiO 2 selectivity, and nearly vertical etch profiles. These results provide a promising route for the fabrication of ultradeep GaN microstructures for use in electronic and optoelectronic device applications. In addition, dry etch induced preferential crystallographic etching in GaN microstructures is also demonstrated, which may be of great interest for applications requiring access to non- or semipolar GaN surfaces.

36 MATERIALS SCIENCE↗