Engineering Papers⌕ Search

Engineering topics

Li, Wei

Publications and source records attributed to Li, Wei.

At least 199 records · Page 11

Entropic and Enthalpic Effects in Thin Film Blends of Homopolymers and Bottlebrush Polymers

We present a combined experimental and computational study of surface segregation in thin films of nearly athermal blends of linear and bottlebrush polymers. The lengths of bottlebrush backbone (N b ), bottlebrush side chain (N sc ), and linear polystyrene host (N m ) are systematically varied to examine the effects of polymer architecture on phase behavior. From the experiments, combinations of architectural parameters are identified that produce enrichment and depletion of bottlebrush at the polymer–air interface. These surface segregation behaviors are consistent with entropy-dominated thermodynamics. In addition, the experiments reveal conditions where bottlebrush and linear polymers are equally preferred at the surface. Simulations based on the self-consistent field theory (SCFT) qualitatively capture the three types of surface segregation behaviors and highlight the delicate interplay of entropic and enthalpic effects. Finally, our investigations demonstrate that controlling both entropic and enthalpic driving forces is critical for the design of surface-active bottlebrush polymer additives.

36 MATERIALS SCIENCE↗

Effects of Silicon Content on the Microstructures and Mechanical Properties of (AlCrTiZrV)-Si x -N High-Entropy Alloy Films

A series of (AlCrTiZrV)-Si x -N films with different silicon contents were deposited on monocrystalline silicon substrates by direct-current (DC) magnetron sputtering. The films were characterized by the X-ray diffractometry (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), and nano-indentation techniques. The effects of the silicon content on the microstructures and mechanical properties of the films were investigated. The experimental results show that the (AlCrTiZrV)N films grow in columnar grains and present a (200) preferential growth orientation. The addition of the silicon element leads to the disappearance of the (200) peak, and the grain refinement of the (AlCrTiZrV)-Si x -N films. Meanwhile, the reticular amorphous phase is formed, thus developing the nanocomposite structure with the nanocrystalline structures encapsulated by the amorphous phase. With the increase of the silicon content, the mechanical properties first increase and then decrease. The maximal hardness and modulus of the film reach 34.3 GPa and 301.5 GPa, respectively, with the silicon content (x) of 8% (volume percent). The strengthening effect of the (AlCrTiZrV)-S ix -N film can be mainly attributed to the formation of the nanocomposite structure.

(AlCrTiZrV)-Six-N films↗

Nontopological Majorana Zero Modes in Inhomogeneous Spin Ladders

Here, we show that the coupling of homogeneous Heisenberg spin-1/2 ladders in different phases leads to the formation of interfacial zero energy Majorana bound states. Unlike Majorana bound states at the interfaces of topological quantum wires, these states are void of topological protection and generally susceptible to local perturbations of the host spin system. However, a key message of our Letter is that, in practice, they show a high degree of resilience over wide parameter ranges which may make them interesting candidates for applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evolutionary conservation of transferrin genomic organization and expression characterization in seven freshwater turtles

Highlights: • Transferrin have evolutionary conservation in genomic organization in freshwater turtles. • Transferrin have evolutionary conservation in expression characterization in freshwater turtles. • 12 positive selected sites were detected in freshwater turtles which were mainly located on the surface of Tf proteins. Serum transferrin (tf), encoding an iron-binding glycoprotein, has been revealed to play important roles in iron transportation and immune response, and it also has been demonstrated to be valuable for phylogenetic analysis in vertebrates. However, the evolutionary conservation, expression profiles and positive selection of transferrin genes among freshwater turtle species remain largely unclear. Here, the genomic DNA and coding sequences of transferrin genes were cloned and characterized in seven freshwater turtles including Mauremys mutica, Mauremys sinensis, Cyclemys dentate, Mauremyssi reevesi, Heosemys grandis, Trachemys scripta and Chrysemys picta. The isolated coding sequences of turtles' tf genes were 2118 bp or 2121 bp, encoding 706 or 707 amino acids. The predicted Tf proteins of turtles share high identities with M. mutica Tf, up to 91%–98% and the M. mutica Tf has the highest identity (91%) in amino acid with the Chelomia mydas Tf, the moderate with other reptiles' Tfs (65%–59%), chicken (58%), and Human Tf (∼55%), and the lowest with zebrafish Tf (41%). Additionally, tf genes were consistently composed of 17 exons and 16 introns with the same splicing sites in introns in all the turtles examined. Moreover, 12 positive selected sites were detected in these turtles’ Tf and mainly distributed on the surface of transferrin protein. Importantly, it was found that transferrin genes in all turtles examined were predominantly expressed in adult liver via real-time quantitative PCR. The molecular characterizations and expression profiles of transferrin would shed new insights into understanding the conversations and divergences of transferrin genes in turtles, even in vertebrates.

60 APPLIED LIFE SCIENCES↗

Circular RNA-100290 promotes cell proliferation and inhibits apoptosis in acute myeloid leukemia cells via sponging miR-203

Highlights: • Circular RNA-100290 expression is increased in AML patients. • Circular RNA-100290 promotes cell proliferation and inhibits apoptosis in AML cells. • Circular RNA-100290 interacts with miR-203/Rab10 axis. Circular RNA (CirRNA) is a type of noncoding RNA that has been shown to play a unique role in tumor development and other fields in recent years. In this study, we aimed to explore the biological role of hsa{sub c}irc{sub 1}00290 in acute myeloid leukemia (AML). First, we found that the expression of hsa{sub c}irc{sub 1}00290 was increased in human AML samples and cell lines. Down-regulation of hsa{sub c}irc{sub 1}00290 significantly suppressed cell proliferation of AML cells. Silencing hsa{sub c}irc{sub 1}00290 also dramatically induced cell cycle arrest and apoptosis. Bioinformatic prediction and luciferase assay revealed that hsa{sub c}irc{sub 1}00290 and Rab10 were targeted by miR-203. Validation experiments verified that hsa{sub c}irc{sub 1}00290 was co-expressed with Rab10 and was negatively correlated with miR-203 expression. Moreover, rescue experiments demonstrated that miR-203 inhibitor could reverse the role of hsa{sub c}irc{sub 1}00290 knockdown on proliferation and apoptosis in AML cells. Overall, the present study identifies the crucial regulation of hsa{sub c}irc{sub 1}00290 in AML cell proliferation and apoptosis via targeting the miR-203/Rab10 axis.

60 APPLIED LIFE SCIENCES↗

Structures and diffusion of two-dimensional dusty plasmas on one-dimensional periodic substrates

Using numerical simulations, we examine the structure and diffusion of a two-dimensional dusty plasma (2DDP) in the presence of a one-dimensional periodic substrate (1DPS) as a function of increasing substrate strength. Both the pair correlation function perpendicular to the substrate modulation and the mean-squared displacement (MSD) of dust particles are calculated. It is found that both the structure and dynamics of 2DDP exhibit strong anisotropic effects, due to the applied 1DPS. As the substrate strength increases from zero, the structure order of dusty plasma along each potential well of 1DPS increases first probably due to the competition between the interparticle interactions and the particle-substrate interactions, and then decreases gradually, which may be due to the reduced dimensionality and the enhanced fluctuations. The obtained MSD along potential wells of 1DPS clearly shows three processes of diffusion in our studied 2DDP. Finally, between the initial ballistic and finally diffusive motion, there is the intermediate subdiffusion discovered here, which may result from the substrate-induced distortion of the caging dynamics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Twin-plane-partitions and $\mathcal{N}$ = 2 affine Yangian

The universal enveloping algebra of W 1+∞ is isomorphic to the affine Yangian of $\mathfrak{g}{\mathfrak{l}}_1$. We study the N = 2 supersymmetric version of this correspondence, and identify the full set of defining relations of the supersymmetric affine Yangian. These relations can be deduced by demanding that the algebra has a representation on twin-plane-partitions, which we construct by gluing pairs of plane partitions. We define the action of the algebra on these twin-plane-partitions explicitly

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-site Pt/La-Al 2 O 3 stabilized by barium as an active and stable catalyst in purifying CO and C 3 H 6 emissions

High-temperature operations present a substantial challenge for developing industrial-capable precious metal catalysts (e.g. Pt/alumina), where the scarce metal atoms easily become wasted as sintered nanoparticles. Using fully dispersed precious metal atoms to deliver the catalysis remains an elusive goal. On a widely used La-stabilized alumina support, we find that the atomically dispersed Pt 1 (II)-O x - species, rather than the much more visible large metal particles, are the actual catalytic sites for the CO and C 3 H 6 oxidation reactions. Unfortunately, the La dopants in alumina support will not hinder the sintering of the active Pt1(II)-Ox- species. As a natural next step, the Ba-Ox- species were introduced to specifically stabilize the single-atom Pt on the La-stabilized alumina support. By implementing this improved formulation, the atomically dispersed Pt on alumina retains the original full dispersion even after 650 °C hydrothermal aging. Intriguingly, with or without the barium additives and/or sintered platinum particles in the catalysts, the intrinsic activity per Pt atom stays intact. Along with other experimental evidence, this leads to the finding that the single-atom Pt is the true catalytic site for the oxidation of CO and C 3 H 6 in the widely-used Pt/La-Al 2 O 3 material system. This work provides a new perspective for efficient precious metal utilization under demanding catalytic conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hepatic conditional knockout of ATF6 exacerbates liver metabolic damage by repressing autophage through MTOR pathway

Highlights: • Conditional knockout of ATF6 exacerbates liver metabolic damage. • Conditional knockout of ATF6 represses autophage. • Conditional knockout of ATF6 activates MTOR pathway. The liver is a central metabolic organ. Activating transcription factor 6 (ATF6) acts as an ER stress responsive gene and is reported to attenuate hepatic steatosis. Over expressing a dominant-negative form of ATF6 exacerbates glucose intolerance and insulin resistance. In the present study, we used the conditional knockout technique to specifically knockout ATF6 in the mouse liver. We used qPCR to detect the mRNA levels of related genes. Western blot analysis was used to evaluate protein levels. Flow cytometry assay showed the apoptosis status. Glucose tolerance tests and insulin tolerance tests were used to determine glucose and insulin sensitivity. The results showed that liver specific knockout of ATF6 exacerbated HFD-induced hepatic steatosis and glucose tolerance. Abolished ATF6 exacerbated gluconeogenic metabolism by MTOR mediated down regulation of autophage. In conclusion, these findings suggest that therapeutic strategies by supplementing ATF6 may be beneficial for the treatment of glucose intolerance as well as insulin resistance in the high fat induced liver metabolic damage condition.

60 APPLIED LIFE SCIENCES↗

Preparation and characterization of biodegradable Mg-Zn-Ca/MgO nanocomposites for biomedical applications

Highlights: • Novel biodegradable Mg-Zn-Ca/MgO matrix composites, were devised and prepared using high shear melt conditioning. • The excellent interfacial bonding between MgO particles and α-Mg matrix was observed via HRTEM and FFT pattern analysis. • The optimum solution treatment and the addition of MgO nanoparticles hugely enhanced corrosion resistance of nanocomposites. • The yield tensile strength (YTS) increased by 22.81% with 0.5% MgO addition, while the ductility did not mainly deteriorate. - Abstract: In order to improve the corrosion resistance and mechanical properties of magnesium alloys for biomedical implant applications, novel biodegradable Mg-3Zn-0.2Ca (wt%) matrix composites, reinforced by adding various contents of MgO nanoparticles (0.1, 0.2, 0.3, 0.5 wt%), were devised and prepared using high shear melt conditioning. An optimum solution treatment (450 °C, 48 h) and subsequent hot extrusion was carried out to produce the Mg-3Zn-0.2Ca/MgO composites. It was found that the as-extruded composite exhibited a fine grain structure with relatively uniformly distributed MgO particles. The orientation relationships (ORs) of (1 1 1){sub MgO} ~ 2.62° from (0 0 0 2){sub α-Mg} and [0 −1 1]{sub MgO} // [2 −1 −1 0]{sub α-Mg}, were observed between the MgO particles and the α-Mg matrix via high resolution transmission electron microscopy (HRTEM) investigation and fast Fourier transform (FFT) pattern analysis, verifying the excellent interfacial bonding between the phases. Additionally, a substantial reduction in the secondary phase content was found in the solution treated sample. In vitro immersion, electrochemical, and mechanical tensile tests were used to characterize the corrosion behavior and mechanical properties. The ultimate tensile strength (UTS) increased to 329.03 ± 2.01 MPa and the yield tensile strength (YTS) increased by 22.81% with 0.5 wt% MgO loading, while the ductility did not substantially deteriorate. The polarization resistance (R{sub p}) of the composite was shown to increase from 0.95 kΩ cm{sup 2} to 2.02 kΩ cm{sup 2} with the addition of 0.2 wt% MgO. With increasing MgO content, agglomeration of the MgO particles was detected in the analyzed composite, resulting in decreased ductility and the occurrence of pitting corrosion.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of graphite morphology on the tensile strength and thermal conductivity of cast iron

Highlights: • The graphite morphology is characterized from 3D structure using X–ray tomography. • The size, distribution, shape and interconnectivity of graphite are estimated. • The influences of graphite morphology on tensile properties and thermal conductivity are evaluated. • The mechanism of tensile strength and the model of thermal conductivity are discussed. - Abstract: Graphite morphology is a very important parameter affecting the properties of cast iron. In this study, the graphite morphology was characterized using both 3D and 2D structures. The experimental results revealed that when the graphite was less spheroidal, the graphite had greater interconnectivity in the 3D structure of the cast iron. The size, distribution, volume fraction, and shape of the graphite were estimated. Moreover, the influences of the graphite's morphology, size, and distribution on the tensile property and thermal conductivity at different temperatures were estimated. The experimental results revealed that with an increase in temperature, the thermal conductivity initially increased, and then decreased, whereas the tensile strength decreased slightly at first, and then decreased rapidly. In addition, with an increase in the percentage of compacted graphite, the tensile strength decreased and the thermal conductivity increased. The fracture surfaces of tensile specimens were also estimated. Finally, the mechanism of tensile strength and the model of thermal conductivity were investigated.

36 MATERIALS SCIENCE↗

Photonic thermal management of coloured objects

The colours of outdoor structures, such as automobiles, buildings and clothing, are typically chosen for functional or aesthetic reasons. With a chosen colour, however, one must control the radiative thermal load for heating or cooling purposes. Here we provide a comprehensive calculation of the tunable range of radiative thermal load for all colours. The range exceeds 680 Wm –2 for all colours, and can be as high as 866 Wm –2 , resulting from effects of metamerism, infrared solar absorption and radiative cooling. We experimentally demonstrate that two photonic structures with the same pink colour can have their temperatures differ by 47.6 °C under sunlight. These structures are over 20 °C either cooler or hotter than a commercial paint with a comparable colour. Furthermore, the hotter pink structure is 10 °C hotter than a commercial black paint. Here, these results elucidate the fundamental potentials of photonic thermal management for coloured objects.

42 ENGINEERING↗

Atomic Structure of 2 nm Size Metallic Cobalt Prepared by Electrochemical Conversion: An in Situ Pair Distribution Function Study

Conversion reactions, offering high capacity in batteries, imply a restructuration of the pristine atomic structure down to the nanoscale. The associated large broadening in the Bragg peaks of the restructured electrode renders the description of atomic structure, almost impossible using conventional X-ray diffraction. On the other hand, atomic pair distribution function (PDF) is well suited to probe the structure of few nanometer-sized particles. We investigated the formation mechanism and structure of 2 nm particle size of metallic Co obtained by electrochemical conversion of CoF 2 . We found that the conversion process stabilized a disordered structure consisting of a hexagonal-close-pack–face-centered-pack intergrowth. The reaction was followed by in situ PDF, providing unique insight into the growth of highly defective Co nanoparticles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗