Exponential Thermal Tensor Network Approach for Quantum Lattice Models
Not Available
Engineering topics
Publications and source records attributed to Li, Wei.
Not Available
The synthesis of composite materials containing carbon nanotubes (CNTs) and inorganic nanocrystals is of interest to combine the specific properties of each components. While literature provides broad studies on the growth of anatase TiO 2 onto CNTs, it has never been reported how the presence of aqueous HF could affect the chemical composition of CNTs. Here, we demonstrated that CNTs are inactive toward fluorination during the solvothermal synthesis of an oxy-hydroxyfluorinated compound featuring the anatase-type structure. We further showed that functionalized CNTs offer nucleation sites that favor nanocrystals growth. As a result, the prepared composite features CNTs that are decorated by anatase nanocrystals. The results also showed that, in this condition, titanium alkoxide readily react with HF via a fluorolysis reaction allowing stabilizing high content of fluorine within the anatase network.
Highlights: • The average grain size generally refines with increasing the laser scan line spacing. • The phase transformation mechanism during SLM is determined by HRTEM. • Some RGO sheets transform into amorphous carbon during SLM process. • The nanohardness is much higher than those casting counterparts. - Abstract: This work for the first time investigated the effect of laser scan line spacing on the microstructure, phase evolution and nanohardness of Ti-48Al-2Cr-2Nb/RGO (reduced graphene oxide) metal matrix composites (MMCs) fabricated by selective laser melting (SLM). The results show that with increasing the laser scan line spacing from 80 to 140 μm, the average grain size generally decreases from 10.13 to 8.12 μm. The SLM-processed Ti-48Al-2Cr-2Nb/RGO parts are dominated by high-angle (>15°) grain boundaries (HAGBs) and α{sub 2} (Ti{sub 3}Al) phase. With the increase in laser scan line spacing, the contents of HAGBs and α{sub 2} phase both decrease. Due to instantaneous high temperature during the SLM process, some RGO sheets transform to amorphous carbon. The nanohardness of SLM-processed Ti-48Al-2Cr-2Nb/RGO parts increase from 8.13 ± 0.39 GPa to 9.85 ± 0.46 GPa when increasing the laser scan line spacing from 80 to 140 μm, which is much higher than that of the traditional casting TiAl counterparts (4.98 ± 0.10 GPa).
Highlights: • TiO{sub 2} slurries have been prepared by a three-step process for the photo-anode of flexible solar cells. • Interparticle connection of photo-anodes has been improved in flexible solar cells. • This flexible QDSSCs exhibits excellent photovoltaic performance and charge transfer property. • There has excellent curving stability on the photovoltaic performance of flexible QDSSCs. - Abstract: Flexible photovoltaic devices have wide applications in many unique areas. However, the interparticle connection of photo-electrode in flexible photovoltaic devices still needs to be improved. Here, TiO{sub 2} slurries have been prepared by a three-step process, which are employed to prepare the photo-anode for flexible CuInS{sub 2} quantum dot sensitized solar cells (QDSSCs). 5 nm-sized TiO{sub 2} nanoparticles and hydrochloric acid (HCl) have been introduced in 20 nm-sized TiO{sub 2} based photo-electrodes under TiO{sub 2}/HCl mass ratio of 3:1, which exhibits excellent photovoltaic performance and charge transfer property. Due to the interparticle connection enhancement by suitable content of 5 nm-sized TiO{sub 2} nanoparticles, photo-anodes with the 20/5-TiO{sub 2} nanoparticles mass ratio of 3:1 exhibits the better optical absorption property and photovoltaic performance of flexible QDSSCs. Moreover, there has maintained 98% photovoltaic conversion efficiency of flexible QDSSCs with the seriously curving condition, which can be considered the great foreground in future applications.
The 2,5-dimethylol-3,6-dimethylpyrazine, C{sub 8}H{sub 12}N{sub 2}O{sub 2}, liguzinediol, has been recently discovered as a potential agent for the treatment of heart failure with low safety risk. The crystal structure of liguzinediol, which has been determined by single-crystal X-ray diffraction analysis, is reported for the first time. The liguzinediol crystal may be obtained from 50% ethanol or ethyl acetate. The compound crystallizes in the monoclinic system with the sp. gr. P2{sub 1}/n and the unit cell parameters a = 4.0560(8) Å, b = 12.280(3) Å, c = 8.5370(17) Å, β = 96.93(3)°, Z = 2. The molecule forms S{sub 2}-symmetric conformation in the crystal. The hydroxyl H atom forms short intermolecular contacts with the neighbouring pyrazine N atom, which forms the weak hydrogen bonds in the crystal.
Understanding the responses of ionic block copolymers to applied electric fields is crucial when targeting applications in areas such as energy storage, microelectronics, and transducers. This work shows that the identity of counterions in ionic diblock copolymers substantially affects their responses to electric fields, demonstrating the importance of ionic species for materials design. In situ neutron reflectometry measurements revealed that thin films containing imidazolium based cationic diblock copolymers, tetrafluoroborate counteranions led to film contraction under applied electric fields, while bromide counteranions drove expansion under similar field strengths. Coarse-grained molecular dynamics simulations were used to develop a fundamental understanding of these responses, uncovering a nonmonotonic trend in thickness change as a function of field strength. Furthermore, this behavior was attributed to elastic responses of microphase separated diblock copolymer chains resulting from variations in interfacial tension of polymer–polymer interfaces due to the redistribution of counteranions in the presence of electric fields.
The nuclear hormone receptor retinoic acid receptor-related orphan C2 (RORC2, also known as RORγt) is a promising target for the treatment of autoimmune diseases. A small molecule, inverse agonist of the receptor is anticipated to reduce production of IL-17, a key proinflammatory cytokine. Through a high-throughput screening approach, we identified a molecule displaying promising binding affinity for RORC2, inhibition of IL-17 production in Th17 cells, and selectivity against the related RORA and RORB receptor isoforms. Lead optimization to improve the potency and metabolic stability of this hit focused on two key design strategies, namely, iterative optimization driven by increasing lipophilic efficiency and structure-guided conformational restriction to achieve optimal ground state energetics and maximize receptor residence time. This approach successfully identified 3-cyano-N-(3-(1-isobutyrylpiperidin-4-yl)-1-methyl-4-(trifluoromethyl)-1H-pyrrolo[2,3-b]pyridin-5-yl)benzamide as a potent and selective RORC2 inverse agonist, demonstrating good metabolic stability, oral bioavailability, and the ability to reduce IL-17 levels and skin inflammation in a preclinical in vivo animal model upon oral administration.
In this study, we study the role of spin–orbit coupling (SOC) in nonradiative relaxation of hot electrons and holes in methylammonium lead perovskite, MAPbI 3 . For this purpose, we have developed the nonadiabatic molecular dynamics method with two-component spinor wave functions that are solutions of the relativistic Kohn–Sham (KS) equations. We find that SOC enhances contributions of Pb(p x ) and Pb(p y ) orbitals to the conduction and valence bands. As a result, the KS orbitals become more sensitive to nuclear motions, leading to the increased nonadiabatic couplings. Consequently, SOC greatly speeds up the electron and hole relaxation, making the computed relaxation time scales consistent with available experiments. Furthermore, we suggest that the fast hot carrier relaxation facilitated by the SOC allows rapid transition into the long-lived triplet state that extends charge-carrier lifetime and helps achieve high-efficiency perovskite solar cells.
Based on the d-electron alloy design theory, a new metastable β-type titanium alloy for biomedical applications, Ti-21Nb-7Mo-4Sn (wt.%) was designed in this article. This theory predicted this alloy was a metastable single β-type titanium alloy with low elastic modulus at room temperature, and the β-phase transition (β to α″) would be easy to occur during the cold rolling. The evolution of microstructure and mechanical properties of this alloy during cold rolling plus annealing were investigated by means of x-ray diffraction, optical microscope, transmission electron microscope and mechanical properties test. The results indicate that only β phase can be identified in this alloy before cold rolling, while a large amount of lath martensite (α″ phase) appears after cold rolling due to stress-induced martensitic transformation, which is in accordance with the prediction of the d-electron alloy design theory. The recrystallization nucleation occurs preferentially in the martensite lath region during the subsequent annealing process, and this region forms a large number of nano-crystals and microcrystals, showing that cold rolling plus annealing can become a new process for refining grains. Compared with casting and cold rolling samples, the annealing materials at 923 K for 10 min have excellent comprehensive mechanical properties with lower elastic modulus (58 GPa) and higher elastic recovery rate (35.39%).
Phosphorus (P) is an essential nutrient for sustaining life and agricultural production. Transformation of readily available P into forms that are unavailable to plants adds costs to P replenishment, which eventually translates into lower agronomic benefits and potential loss of soil P into runoff may degrade water quality. Therefore, understanding the sources and pathways of the formation of residual P pools in soils is useful information needed for the development of any technological or management efforts to minimize or inhibit the formation of such P pool and thus maximize availability to plants. In this research, we paired phosphate oxygen isotope ratios (δ 18 O P ) with solid-state 31 P NMR and quantitative XRD techniques along with general soil chemistry methods to identify the precipitation pathways of acid-extracted inorganic P (P i ) pools in an agricultural soil. Based on the comparison of isotope values of 0.5 mol L -1 NaOH-P i , 1 mol L -1 HCl-P i , and 10 mol L -1 HNO 3 -P i pools and correlations of associated elements (Ca, Fe, and Al) in these pools, the HNO 3 -P i pool appears most likely to be transformed from the NaOH-P i pool. A narrow range of isotope values of acid-P i pools in shallow (tilling depth) and below (where physical mixing is absent) is intriguing but likely suggests leaching of particle-bound P in deeper soils. Overall, these findings provide an improved understanding of the sources, transport, and transformation of acid-P i pools in agricultural soils and further insights into the buildup of legacy P in soils.
Electron microscopy and defect analysis are a cornerstone of materials science, as they offer detailed insights on the microstructure and performance of a wide range of materials and material systems. Building a robust and flexible platform for automated defect recognition and classification in electron microscopy will result in the completion of analysis orders of magnitude faster after images are recorded, or even online during image acquisition. Automated analysis has the potential to be significantly more efficient, accurate, and repeatable than human analysis, and it can scale with the increasingly important methods of automated data generation. Herein, an automated recognition tool is developed based on a computer vison–based approach; it sequentially applies a cascade object detector, convolutional neural network, and local image analysis methods. We demonstrate that the automated tool performs as well as or better than manual human detection in terms of recall and precision and achieves quantitative image/defect analysis metrics close to the human average. The proposed approach works for images of varying contrast, brightness, and magnification. Furthermore, these promising results suggest that this and similar approaches are worth exploring for detecting multiple defect types and have the potential to locate, classify, and measure quantitative features for a range of defect types, materials, and electron microscopic techniques.
Outdoor heat stress poses a serious public health threat and curtails industrial labor supply and productivity, thus adversely impacting the wellness and economy of the entire society. With climate change, there will be more intense and frequent heat waves that further present a grand challenge for sustainability. However, an efficient and economical method that can provide localized outdoor cooling of the human body without intensive energy input is lacking. Here, a novel spectrally selective nanocomposite textile for radiative outdoor cooling using zinc oxide nanoparticle–embedded polyethylene is demonstrated. By reflecting more than 90% solar irradiance and selectively transmitting out human body thermal radiation, this textile can enable simulated skin to avoid overheating by 5–13 °C compared to normal textile like cotton under peak daylight condition. In conclusion, owing to its superior passive cooling capability and compatibility with large–scale production, this radiative outdoor cooling textile is promising to widely benefit the sustainability of society in many aspects spanning from health to economy.
The exploration of intriguing topological quantum physics in stanene has attracted enormous interest but is challenged by lacking desirable material samples. The successful fabrication of monolayer stanene on PbTe(111) films with low-temperature molecular beam epitaxy and thorough characterizations of its atomic and electronic structures are reported here. In situ angle-resolved photoemission spectroscopy together with first-principles calculations identify two hole bands of p xy orbital with a spin-orbit coupling induced band splitting and meanwhile reveal an automatic passivation of p z orbital of stanene. Importantly, material properties are tuned by substrate engineering, realizing a decorated stanene sample with truly insulating bulk on Sr-doped PbTe. In conclusion, this finding paves a road for studies of stanene-based topological quantum effects and electronics.
Abstract not provided
CeCo{sub 5}-based magnets have recently attracted much attention due to their moderate magnetic performance and low cost. Nevertheless, there have been few studies on the effects of Ce content on the magnetic properties and microstructures of CeCo{sub 5}-based magnets. In response to this, the magnetic properties of sintered bulk magnets with nominal compositions of Ce(Co{sub 0.73}Cu{sub 0.135}Fe{sub 0.135}){sub z} (z = 4.95, 5.15, 5.35, and 5.55), prepared by the conventional powder metallurgy method, were investigated here. Based on experimental findings, it was shown that Ce(Co{sub 0.73}Cu{sub 0.135}Fe{sub 0.135}){sub 5.15} sintered bulk magnets had comprehensive magnetic properties—maximum energy product of 80 kJ m{sup − 3} (10 MGOe) and intrinsic coercivity (H{sub cj}) of 452 kA m{sup − 1} (5.69 kOe)—superior to those previously reported by us. For z = 5.35 and 5.55, due to the presence of the minor Ce{sub 2}Co{sub 17} phase (which has a Curie temperature (T{sub c}) < 20 °C), magnets had low H{sub cj} values. Based on x-ray diffraction and scanning electron microscopy observations, it was suggested that the volume fraction of the 1:5 matrix phase was the main factor determining the H{sub cj} of CeCo{sub 5}-based sintered bulk magnets obtained with different Ce contents. Furthermore, the importance of the dispersion characteristics of the Ce{sub 2}O{sub 3} phase within the matrix was emphasized. Uniform dispersion of the Ce{sub 2}O{sub 3} phase can significantly improve the overall magnetic performance of CeCo{sub 5}-based magnets.
Highlights: • Decreased TNIP1 was measured in hepatic I/R. • TNIP1 affected hepatocyte proliferation and apoptosis after H/R. • TNIP1 attenuated the inflammatory response in hepatocytes injured by H/R. • TNIP1 inhibited the TLR4-Myd88 signaling in hepatocytes injured by H/R. • TLR4 reversed improvement induced by TNIP1 in hepatocytes injured by H/R. Hepatic ischemia/reperfusion (I/R) injury induces oxidative stress, hepatocyte apoptosis, and release of inflammatory cytokines, which together causes liver damage and even organ dysfunction. TNF-α-induced protein 3-interacting protein 1 (TNIP1) reportedly decreases expression of genes associated with stress response and inflammation. Thus, we investigated the effects of TNIP1 on hepatic cells injury caused by hypoxia/reoxygenation (H/R). Reduced expression of TNIP1 was determined in I/R mice compared to normal mice. Then, TNIP1 transgene mice were used to determine the effects of TNIP1 on mice after treatment for I/R. In the normal transgene (NTG) group, serum liver damage markers alanine aminotransferase (ALT), aspartate aminotransferase (AST), lactate dehydrogenase (LDH) and gamma glutamyl transferase (GGT) in I/R mice significantly increased compared to the sham-operated mice. However, in the TNIP1 transgene (TNIP1-TG) group, those levels in I/R mice were reduced than that in NTG mice. Additionally, cell viability and apoptosis in the hepatic cell line L02 were detected after H/R treatment, MTT assay showed that cell viability was inhibited after H/R treatment, but reversed after ad-TNIP1 transfection. Cell apoptosis also was inhibited after ad-TNIP1 transfection, as shown by the caspase-3 and caspase-9 levels and Bcl-2 and Bax values. Furthermore, TNIP1 overexpression also attenuated the inflammatory response of L02 cells after H/R treatment. Finally, treatment with TNIP1 reduced the elevated expression of TLR2, TLR4, and Myd88 after H/R injury, but overexpression of TLR4 reversed the effects of TNIP1. In conclusion, TNIP1 may protect H/R-induced hepatic cell injury by inhibiting the TLR4/Myd88 pathway.