Engineering Papers⌕ Search

Engineering topics

Li, Wei

Publications and source records attributed to Li, Wei.

At least 181 records · Page 10

Exploring novel QCD matter in proton-proton and proton-nucleus collisions at the LHC

This project focuses on studying a novel hot quark-gluon plasma (QGP) matter possibly created in high-multiplicity proton-proton (pp) and proton-lead (pPb) collisions at the LHC using the CMS detector. Over the past year, the PI has been leading the Rice heavy-ion group to focus on the analysis of new high-luminosity pp and pPb data at the LHC run 2 at highest energy ever achieved. The Rice group continues strengthening our leadership in the study of collective phenomena in small colliding systems, with a focus on heavy flavor production and dynamics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The influence of curvature on domain distribution in binary mixture membranes

Curvature-induced domain sorting, a strategy exploited by cells to organize membrane components, is a promising mechanism to control self-assembly of materials. To comprehend this phenomenon, we explore the effects of curvature on component rearrangement in thin polymer films and lipid bilayers supported on sinusoidal substrates. Self-consistent field theory (SCFT), specifically, was used to study the spatial distribution of polymers in blends containing conformationally asymmetric chains. In addition, coarse-grained molecular dynamics (MD) simulations were used to probe the arrangement of rigid lipid domains in a relatively soft lipid matrix. Besides the expected preference of rigid species localizing in regions with low mean curvature, both systems exhibit unexpected localization of rigid components in comparatively high curvature regions. The origins of this unexpected sorting are discussed in terms of entropic and enthalpic contributions. In summary, this study demonstrates that domain distribution strongly depends on local topography and further highlights the collective effects that thermodynamic forces have on the morphological behavior of membranes.

36 MATERIALS SCIENCE↗

Thermal tensor renormalization group simulations of square-lattice quantum spin models

In this work, we benchmark the well-controlled and numerically accurate exponential thermal tensor renormalization group (XTRG) in the simulation of interacting spin models in two dimensions. Finite temperature introduces a finite thermal correlation length ξ, such that for system sizes L >> ξ finite-size calculations actually simulate the thermodynamic limit. Here in this paper, we focus on the square lattice Heisenberg antiferromagnet (SLH) and quantum Ising models (QIM) on open and cylindrical geometries up to width W = 10 . We explore various one-dimensional mapping paths in the matrix product operator (MPO) representation, whose performance is clearly shown to be geometry dependent. We benchmark against quantum Monte Carlo (QMC) data, yet also the series-expansion thermal tensor network results. Thermal properties including the internal energy, specific heat, and spin structure factors, etc. are computed with high precision, obtaining excellent agreement with QMC results. XTRG also allows us to reach remarkably low temperatures. For SLH, we obtain an energy per site u$^*_g$ ≃ -0.6694 (4) and a spontaneous magnetization m$^*_S$ ≃ 0.30 ( 1 ) already consistent with the ground-state properties, which is obtained from extrapolated low-T thermal data on W ≤ 8 cylinders and W ≤ 10 open strips, respectively. We extract an exponential divergence versus T of the structure factor S (M), as well as the correlation length ξ, at the ordering wave vector M = ($π,π$) , which represents the renormalized classical behavior and can be observed over a narrow but appreciable temperature window, by analyzing the finite-size data by XTRG simulations. For the QIM with a finite-temperature phase transition, we employ several thermal quantities, including the specific heat, Binder ratio, as well as the MPO entanglement to determine the critical temperature $T_c$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Red-Shifted Absorptions of Cation-Defective and Surface-Functionalized Anatase with Enhanced Photoelectrochemical Properties

Manipulating the atomic structure of semiconductors is a fine way to tune their properties. The rationalization of their modified properties is, however, particularly challenging as defects locally disrupt the long-range structural ordering, and a deeper effort is required to fully describe their structure. In this work, we investigated the photoelectrochemical properties of an anatase-type structure featuring a high content of titanium vacancies stabilized by dual-oxide substitution by fluoride and hydroxide anions. Such atomic modification induces a slight red-shift band gap energy of 0.08 eV as compared to pure TiO 2 , which was assigned to changes in titanium–anion ionocovalent bonding. Under illumination, electron paramagnetic resonance spectroscopy revealed the formation of Ti III and O 2 – radicals which were not detected in defect-free TiO 2 . Consequently, the modified anatase shows higher ability to oxidize water with lower electron–hole recombination rate. To further increase the photoelectrochemical properties, we subsequently modified the compound by a surface functionalization with N-methyl-2-pyrrolidone (NMP). This treatment further modifies the chemical composition, which results in a red shift of the band gap energy to 3.03 eV. Moreover, the interaction of the NMP electron-donating molecules with the surface induces an absorption band in the visible region with an estimated band gap energy of 2.25–2.50 eV. Under illumination, the resulting core–shell structure produces a high concentration of reduced Ti III and O 2 – , suggesting an effective charge carrier separation which is confirmed by high photoelectrochemical properties. This work provides new opportunities to better understand the structural features that affect the photogenerated charge carriers.

74 ATOMIC AND MOLECULAR PHYSICS↗

A Finite-Element Approach for the Partitioning of Carbon in Q&P Steel

This paper reports a Galerkin finite-element analysis of carbon partitioning from martensite into austenite during the quenching and partitioning (Q&P) processes in steels. In contrast to classical or sophisticated diffusion field models, an alternative nonlinear governing equation based on chemical potential and composition is considered. The model is applied to simulate the carbon partitioning of modified 22MnB5 alloys assuming an immobile austenite–martensite phase boundary and, in turn, is compared with experimental measurements of the volume fraction and carbon content of retained austenite. The simulations show outstanding results on the influence of Si and C content on the partitioning parameters.

36 MATERIALS SCIENCE↗

A novel synthetic-genetic-array–based yeast one-hybrid system for high discovery rate and short processing time

Eukaryotic gene expression is often tightly regulated by interactions between transcription factors (TFs) and their DNA cis targets. Yeast one-hybrid (Y1H) is one of the most extensively used methods to discover these interactions. We developed a high-throughput meiosis-directed yeast one-hybrid system using the Magic Markers of the synthetic genetic array analysis. The system has a transcription factor–DNA interaction discovery rate twice as high as the conventional diploid-mating approach and a processing time nearly one-tenth of the haploid-transformation method. The system also offers the highest accuracy in identifying TF–DNA interactions that can be authenticated in vivo by chromatin immunoprecipitation. With these unique features, this meiosis-directed Y1H system is particularly suited for constructing novel and comprehensive genome-scale gene regulatory networks for various organisms.

59 BASIC BIOLOGICAL SCIENCES↗

Alternating crystalline lamellar structures from thermodynamically miscible poly(ε-caprolactone) H/D blends

Thermodynamic interaction and non-isothermal crystallization behavior in a series of protiated (H-) and deuterated (D-) poly(ε-caprolactone) (PCL) blends have been systematically investigated. The blends were thermodynamically miscible in the melt. The Flory–Huggins interaction parameter (χ) between H- and D-PCL segments was estimated. The hydroxyl groups in the PCL chain-ends were found to contribute significantly to the negative χ values. Combined characterization of small-angle X-ray scattering (SAXS) and small-angle neutron scattering (SANS) revealed that upon slow cooling, unique alternating H-rich and D-rich PCL lamellar structures are formed regardless of the blend ratio, which is attributed to the T c difference between H- and D-PCLs. While upon rapid cooling, mixed crystals of H- and D-PCLs are predominantly formed. These results provide insightful information on the melt thermodynamics as well as detailed chain arrangements in lamellar crystals for semi-crystalline H/D polyester blends.

36 MATERIALS SCIENCE↗

Experimental demonstration of energy harvesting from the sky using the negative illumination effect of a semiconductor photodiode

We experimentally demonstrate electric power generation from the coldness of the universe directly, using the negative illumination effect when an infrared semiconductor diode faces the sky. Our theoretical model, accounting for the experimental results, indicates that the performance of such a power generation scheme is strongly influenced by the degree of matching between the responsivity spectrum and the atmospheric transparency window, as well as the quantum efficiency of the diode. A Shockley-Queisser analysis of an ideal optimized diode, taking into consideration the realistic transmissivity spectrum of the atmosphere, indicates the theoretical maximum power density of 3.99 W/m2 with the diode temperature at 293 K. The results here point to a pathway towards night-time power generation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Isotope Effects on the Crystallization Kinetics of Selectively Deuterated Poly(ε-Caprolactone)

Deuterium labeling of semi-crystalline polymers can dramatically affect their crystallization behaviors. However, the influence of different labeled positions in a partially deuterated polymer on its crystallization is still far from understood. Here, we synthesized a series of selectively deuterated poly(ε-caprolactones) (PCLs) through ring-opening polymerization of ε-caprolactone with controlled deuteration sites, including fully protiated (D0), fully deuterated (D10), tetra deuteration at the 3- and 7- caprolactone ring positions (D4) and hexa deuteration at the 4-, 5-, and 6- caprolactone ring positions (D6). All the PCLs showed a similar lamellar structure and parameters. Differential scanning calorimetry (DSC) analysis revealed that the equilibrium melting temperature $T^{0}_{m}$, melting temperature T m , crystallization temperature T c , and crystallization kinetics changed systemically with the deuterium content except for D4, which indicates that the presence of—CD 2 —moieties on either side of ester group in the polymer chain combined with isotopic inhomogeneity could influence the chain packing. The nonmonotonic trend of T m as a function of deuterium content could be attributed to the difference in a hydrogen-bond like intermolecular interaction between different PCLs. Partially deuterated PCLs (D4 and D6) showed an Avrami index near 2. After analyzing the parameters at the same supercooling temperature Δ T c , the existence of two crystallization regimes of PCLs were detected.

36 MATERIALS SCIENCE↗

Two-temperature scales in the triangular-lattice Heisenberg antiferromagnet

The anomalous thermodynamic properties of the paradigmatic frustrated spin-1/2 triangular-lattice Heisenberg antiferromagnet (TLH) has remained an open topic of research over decades, both experimentally and theoretically. We further the theoretical understanding based on the recently developed, powerful exponential tensor renormalization group method on cylinders and stripes in a quasi-one-dimensional (1D) setup, as well as a tensor product operator approach directly in 2D. The observed thermal properties of the TLH are in excellent agreement with two recent experimental measurements on the virtually ideal TLH material ${\mathrm{Ba}}_{8}{\mathrm{CoNb}}_{6}{\mathrm{O}}_{24}$. Remarkably, our numerical simulations reveal two crossover temperature scales, at ${T}_{l}/J{\sim}0.20$ and ${T}_{h}/J{\sim}0.55$, with $J$ the Heisenberg exchange coupling, which are also confirmed by a more careful inspection of the experimental data. We propose that in the intermediate regime between the low-temperature scale ${T}_{l}$ and the higher one ${T}_{h}$, the "rotonlike" excitations are activated with a strong chiral component and a large contribution to thermal entropies. Bearing remarkable resemblance to the renowned roton thermodynamics in liquid helium, these gapped excitations suppress the incipient ${120}^{{\circ}}$ order that emerges for temperatures below ${T}_{l}$.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Nb on Superelasticity and Low Modulus Properties of Metastable β-Type Ti-Nb-Ta-Zr Biomedical Alloys

In this work, a series of Ti-xNb-2Ta-3Zr (x = 25, 30, 35, 40 wt.%) alloys are designed, and the transformation of β-phase to α″ martensitic, β-phase stability, microstructure, mechanical properties and corrosion performance of these alloys are investigated. The phase analysis shows as the Nb content increases, the α″ phase in these alloys decreases, while the intensity of the two main peaks β(110) and β(211) of Ti-40Nb-2Ta-3Zr alloy is reduced. These results can be attributed to the variation of β-phase stability caused by Nb element of alloy and cold rolling process. The mechanical properties test shows that the elastic modulus (52 GPa) of the Ti-35Nb-2Ta-3Zr alloy is the lowest and the elongation (18.8%) is the maximum. In addition, the alloy is susceptible to β-phase elastic deformation and stress-induced martensitic transformation resulting in the highest recovery strain of the alloy (66.87%). The polarization curves show that the Ti-35Nb-2Ta-3Zr alloy has the highest corrosion potential (− 0.34 V) and the lowest corrosion current density (0.21 μA cm{sup −2}) exhibiting the best corrosion resistance.

36 MATERIALS SCIENCE↗

Wear and Corrosion Behavior of Graphene-Nanoplate-Reinforced Copper Matrix Composites Prepared Through Electrostatic Self-Assembly

Synthesis of graphene nanoplates (GNPs)/copper (Cu) composites is one of the key challenges in the uniform dispersion of GNPs in the Cu matrix because of their density difference. In this work, GNPs/Cu composites are synthesized through electrostatic self-assembly and spark plasma sintering. The GNPs are uniformly dispersed in the Cu matrix. The graphene protective films are formed in the composites to protect the Cu matrix. The antifriction performance of the GNPs/Cu composites is investigated using a ball-on-disk apparatus. The corrosion resistance of the GNPs/Cu composites is estimated using potentiodynamic polarization curves. Wear and corrosion mechanisms are analyzed through scanning electron microscopy with energy-dispersive spectroscopy. The antifriction performance and corrosion resistance of the composites can be significantly improved by adding GNPs.

36 MATERIALS SCIENCE↗

Visualization of Local Conductance in MoS 2 /WSe 2 Heterostructure Transistors

The vertical stacking of van der Waals (vdW) materials presents a new degree of freedom to the research of two-dimensional (2D) systems. The interlayer coupling strongly influences the band structure of the heterostructures, resulting in novel properties that can be utilized for electronic and optoelectronic applications. Based on microwave microscopy studies, we report quantitative electrical imaging on gated molybdenum disulfide (MoS 2 )/tungsten diselenide (WSe 2 ) heterostructure devices, which exhibit an intriguing antiambipolar effect in their transfer characteristics. Interestingly, in the region with significant source-drain current, electrons in the n-type MoS 2 and holes in the p-type WSe 2 segments are nearly balanced, whereas the heterostructure area is depleted of mobile charges. The spatial evolution of local conductance can be ascribed to the lateral band bending and formation of depletion regions along the line of MoS 2 -heterostructure-WSe 2 . Our work vividly illustrates the microscopic origin of novel transport behaviors, which is important for the vibrant field of vdW heterojunction research.

42 ENGINEERING↗

High-Temperature Properties and Microstructural Stability of the AISI H13 Hot-Work Tool Steel Processed by Selective Laser Melting

The microstructural stabilities, softening resistance, and high-temperature tensile properties of the H13 hot-work tool steel by selective laser melting (SLM) were systematically studied. A series of tempering procedures were performed on the as-SLMed specimens. Afterwards, the mechanism of softening resistance behavior was discussed based on the XRD, SEM, EBSD observations, hardness measurements, and high-temperature tensile tests. It was found that the as-SLMed H13 consisted of α-iron and γ-iron. The carbide-stabilizing elements aggregated as the cell-like substructures for the rapid solidification of the SLM process. After the softening resistance treatment, the retained austenite transformed to ferrite and carbide mixtures. The cell-like substructures dissolved slowly into the matrix when the temperature was below 550 °C. These factors increased the hardness and retarded the softening of the material. When the temperature was 600 °C, the microstructural constituents transformed to soft ferrite and globular carbides, which lead to a considerable decrease of the hardness. Due to the grain refinement, solid solution strengthening, and residual stress, the as-SLMed H13 exhibited better mechanical properties than that of the wrought counterparts.

36 MATERIALS SCIENCE↗