Engineering Papers⌕ Search

Engineering topics

Li, Rui

Publications and source records attributed to Li, Rui.

At least 55 records · Page 3

Ultrasmall Zeolite L Crystals Prepared from Highly Interdispersed Alkali‐Silicate Precursors

Abstract The preparation of nanosized zeolites is critical for applications where mass‐transport limitations within microporous networks hinder their performance. Often the ability to generate ultrasmall zeolite crystals is dependent upon the use of expensive organics with limited commercial relevance. Herein, we report the generation of zeolite L crystals with uniform sizes less than 30 nm using a facile, organic‐free method. Time‐resolved analysis of precursor assembly and evolution during nonclassical crystallization highlights key differences among silicon sources. Our findings reveal that a homogenous dispersion of potassium ions throughout silicate precursors leads to the formation of a metastable nonporous phase, which undergoes an intercrystalline transformation to zeolite L. The generation of highly interdispersed alkali‐silicate precursors is seemingly critical to enhancing the rate of nucleation and facilitating the formation of ultrasmall crystal.

Li, Rui↗

Tunable surface acoustic wave device using semiconducting MgZnO and piezoelectric NiZnO dual-layer structure on glass

Tunable surface acoustic wave (SAW) devices have attracted considerable interests due to its applications in emerging fields, such as secured wireless communication, adaptive signal processing, and smart sensing systems. We report a dual-input-voltage-controlled tunable SAW built on glass, which uses a ZnO-based dual-layer structure consisting of a piezoelectric Ni- doped ZnO (NZO) and semiconducting Mg-doped ZnO (MZO). The interdigital (IDT) electrodes are buried in the piezoelectric NZO layer to form the delay line for SAW propagation, while the semiconductor MZO layer serves as the channel of a thin film transistor (TFT) to modulate the conductivity. Results show the interface between MZO channel and SiO 2 gate dielectric layer of the TFTT significantly impacts on SAW tuning performances due to Zn diffusion from MZO into SiO 2 . The TFT-SAW device using an ultra-thin MgO layer as interface modification enables SAW frequency tuning of 0.53% under solely V gs control with 0–12 V. The required voltage range is significantly reduced compared regular MZO-NZO TFT-SAW counterpart (Δf/f c ~ 0.25%; V gs –30 to –14 V) without interface modification. With additional control of V ds , the SAW frequency tunability is further expanded from 0.46% to 0.63%. As a result, this dual-input voltage-controlled frequency tuning device on glass is promising for low-voltage, low-cost portable smart sensors and voltage-controlled reconfigurable radio-frequency identification tags.

36 MATERIALS SCIENCE↗

Development of a bunched beam electron cooler for the Jefferson Lab electron-ion collider

Jefferson Lab is in the process of designing an electron-ion collider with unprecedented luminosity at a 65 GeV center-of-mass energy. This luminosity relies on ion cooling in both the booster and the storage ring of the accelerator complex. The cooling in the booster will use a conventional DC cooler similar to the one at COSY. The high-energy storage ring, operating at a momentum of up to 100 GeV/nucleon, requires novel use of bunched-beam cooling. We will present a new design for a Circulator Cooler Ring for bunched-beam electron cooling. This requires the generation and transport of very high-charge magnetized bunches, acceleration of the bunches in an energy recovery linac, and transfer of these bunches to a circulating ring that passes the bunches 11 times through the proton or ion beam inside cooling solenoids. This design requires the suppression of the effects of space charge and coherent synchrotron radiation using shielding and RF compensation.

Benson, Stephen V.↗

Coupled Bunch Instability from JLEIC Crab Cavity Higher Order Modes

Particle bunches traveling in a ring can excite wakefields inside any radio-frequency (rf) element present. These electromagnetic modes can resonate long enough and interact with subsequent passing bunches. A coherent oscillation between bunches can quickly become an instability and needs to be addressed. The Jefferson Lab Electron-Ion Collider (JLEIC) has a large 50 mrad crossing angle and thus relies on bunch crabbing to achieve high luminosity. Bunch crabbing is done with compact superconducting rf dipole cavities. We study coupled bunch oscillations driven by the higher order modes (HOM) of multi-cell rf dipole (rfd) crab cavities under study for JLEIC, we calculate the instability growth time assuming a symmetric beam frequency spectrum, identify the HOM driving the instability and discuss mitigation measures.

Sosa Guitron, Salvador I.↗

LONGITUDINAL COUPLED BUNCH INSTABILITY IN JLEIC

The luminosity performance of the JLEIC design is achieved by using a high bunch repetition rate (476MHz) with moderate bunch charges, similar to the strategy employed in modern lepton colliders. Such a bunch configuration will make single bunch instabilities less problematic, yet makes the machine more prone to the onset of longitudinal and transverse coupled bunch instabilities. Consequently, this will set higher demands on the bunch-by-bunch feedback systems to mitigate the multi-bunch instabilities. In this paper we present our detailed analysis of the growth rate of the coupled bunch instabilities for beams in both the electron and ion rings due to the accelerating RF cavities in JLEIC at the collision scenario. The implication of the growth rate on the feedback system will be discussed.

Li, Rui↗

Updates on Collective Effects Estimations for the JLEIC

JLEIC is the high luminosity and high polarization electron-ion collider (EIC) currently under active design at Jefferson Lab. It aims at high luminosity 1033~1034 cm-2s-1for a wide range of ion species and center-of-mass energies. This luminosity performance relies sensibly on beam stability with high intensity electron and ion beam operation. The impedance budget analysis and the estimations of the single and multibunch instabilities are currently underway. In this paper, we present the update status of estimations for the longitudinal and transverse coherent instabilities, and identify areas or parameter regimes where special attentions for instability mitigations are required.

Li, Rui↗

Diverse Physical States of Amorphous Precursors in Zeolite Sol Gel Syntheses

The assembly and structural evolution of amorphous precursors during zeolite crystallization is an important area of interest owing to their putative roles in the nucleation and growth of aluminosilicate microporous materials. Precursors range in complexity from oligomeric molecules and colloidal particles to gels comprised of heterogeneous silica and alumina domains. The physical state of precursors in most zeolite syntheses is generally not well understood; however, it is evident that the physicochemical properties of precursors depend on a wide range of conditions that include (but are not limited to) the selection of reagents, the composition of growth mixtures, the methods of preparation, and the use of inorganic and/or organic structure-directing agents. The fact that precursors evolve in size, shape, and/or microstructure during the course of nucleation and potentially throughout crystallization leads to questions pertaining to their mode of action in the formation of zeolites. Finally, this also highlights the diversity of species that are present in growth media, thus rendering the topic of zeolite synthesis essentially a black box to those attempting to better understand the fundamental role(s) of precursors. Here in this Article, we discuss the wide variety of precursors encountered in the synthesis of various framework types, emphasizing their complex physical states and the thermodynamic and kinetic factors that govern their heterogeneity.

36 MATERIALS SCIENCE↗

Evolution of topological skyrmions across the spin reorientation transition in Pt/Co/Ta multilayers

Magnetic skyrmions in multilayers are particularly appealing as next generation memory devices due to their topological compact size, the robustness against external perturbations, the capability of electrical driving and detection, and the compatibility with the existing spintronic technologies. To date, Néel-type skyrmions at room temperature (RT) have been studied mostly in multilayers with easy-axis magnetic anisotropy. Here in this paper, we systematically broadened the evolution of magnetic skyrmions with sub-50-nm size in a series of Pt/Co/Ta multilayers where the magnetic anisotropy is tuned continuously from easy axis to easy plane by increasing the ferromagnetic Co layer thickness. The existence of nontrivial skyrmions is identified via the combination of in situ Lorentz transmission electron microscopy (L-TEM) and Hall transport measurements. A high density of magnetic skyrmions over a wide temperature range is observed in the multilayers with easy-plane anisotropy, which will stimulate further exploration for new materials and accelerate the development of skyrmion-based spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Improve the efficiency of the Cartesian tensor based fast multipole method for Coulomb interaction using the traces

To compute the non-oscillating mutual interaction for a systems with N points, the fast multipole method (FMM) has an efficiency that scales linearly with the number of points. Specifically, for Coulomb interaction, FMM can be constructed using either the spherical harmonic functions or the totally symmetric Cartesian tensors. In this paper, we will present that the effciency of the Cartesian tensor-based FMM for the Coulomb interaction can be significantly improved by implementing the traces of the Cartesian tensors in calculation to reduce the independent elements of the n-th rank totally symmetric Cartesian tensor from (n + 1)(n + 2)=2 to 2n + 1. The computation complexity for the operations in FMM are analyzed and expressed as polynomials of the highest rank of the Cartesian tensors. For most operations, the complexity is reduced by one order. Numerical examples regarding the convergence and the effciency of the new algorithm are demonstrated. As a result, a reduction of computation time up to 50% has been observed for a moderate number of points and rank of tensors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Targeting Myeloid-derived Suppressor Cells and Programmed Death Ligand 1 Confers Therapeutic Advantage of Ablative Hypofractionated Radiation Therapy Compared With Conventional Fractionated Radiation Therapy

Ablative hypofractionated radiation therapy (AHFRT) presents a therapeutic advantage compared with conventional fractionated radiation therapy (CFRT) for primary and oligometastatic cancers. However, the underlying mechanisms remain largely unknown. In the present study, we compared the immune alterations in response to AHFRT versus CFRT and examined the significance of immune regulations contributing to the efficacy of AHFRT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Genomic variation in 3,010 diverse accessions of Asian cultivated rice

Here we analyse genetic variation, population structure and diversity among 3,010 diverse Asian cultivated rice (Oryza sativa L.) genomes from the 3,000 Rice Genomes Project. Our results are consistent with the five major groups previously recognized, but also suggest several unreported subpopulations that correlate with geographic location. We identified 29 million single nucleotide polymorphisms, 2.4 million small indels and over 90,000 structural variations that contribute to within- and between-population variation. Using pan-genome analyses, we identified more than 10,000 novel full-length protein-coding genes and a high number of presence–absence variations. The complex patterns of introgression observed in domestication genes are consistent with multiple independent rice domestication events. The public availability of data from the 3,000 Rice Genomes Project provides a resource for rice genomics research and breeding.

59 BASIC BIOLOGICAL SCIENCES↗

Development of a Bunched Beam Electron Cooler based on ERL and Circulator Ring Technology for the Jefferson Lab Electron-Ion Collider

Jefferson Lab is in the process of designing an electron ion collider with unprecedented luminosity at a 45 GeV center-of-mass energy. This luminosity relies on ion cooling in both the booster and the storage ring of the accelerator complex. The cooling in the booster will use a conventional DC cooler similar to the one at COSY. The high-energy storage ring, operating at a momentum of up to 100 GeV/nucleon, requires novel use of bunched-beam cooling. There are two designs for such a cooler. The first uses a conventional Energy Recovery Linac (ERL) with a magnetized beam while the second uses a circulating ring to enhance both peak and average currents experienced by the ion beam. This presentation will describe the design of both the Circulator Cooling Ring (CCR) design and that of the backup option using the stand-alone ERL operated at lower charge but higher repetition rate than the ERL injector required by the CCR-based design.

Benson, Stephen V.↗

The bioaccessibility of iodine in the biofortified vegetables throughout cooking and simulated digestion

Biofortification of crops with exogenous iodine is a novel strategy to control iodine deficiency disorders (IDD). The bioaccessibility of iodine (BI) in the biofortified vegetables in the course of soaking, cooking and digestion, were examined. Under hydroponics, the concentration of iodine in leafstalks of the celery and pakchoi increased with increasing exogenous iodine concentration, 54.8–63.9% of the iodine absorbed by pakchoi was stored in the soluble cellular substance. Being soaked in water within 8 h, the iodine loss rate of the biofortified celery was 3.5–10.4% only. More than 80% of the iodine in the biofortified celery was retained after cooking under high temperature. The highest BI of the biofortified vegetables after digestion in simulated gastric and intestinal juice amounted to 74.08 and 68.28%, respectively. Factors influencing BI included pH, digestion duration, and liquid-to-solid ratio. The high BI of the biofortified vegetables provided a sound reference for the promotion of iodine biofortification as a tool to eliminate the IDD.

60 APPLIED LIFE SCIENCES↗