Engineering topics
Li, Rui
Publications and source records attributed to Li, Rui.
Carbon sequestration of steel slag and carbonation for activating RO phase
Carbonation of Ca/Mg minerals in industrial alkaline residues is a technology to sequester CO{sub 2} and reduce its emissions to the atmosphere. In this work, BSE-EDS were used to determine the mineral phase in steel slag; compositions of RO phase were identified and simulated. The carbon sequestration of steel slag was studied, and RO phase was activated by carbonation. Result shows that the amount of CO{sub 2} sequestered in steel slag and RO phase increases as carbonation time increases. Under autoclaving condition, the hydration ratio of MgO in RO phase was 20.10%. Through carbonation, up to 58.83% of MgO in RO phase can be converted into MgCO{sub 3}, and the activation of RO phase by carbonation was manifested. The mechanical properties and volume stability of carbonated steel slag were improved, proving that the positive effect of carbonation on steel slag when applied in cement and cementitious materials.
Magnetocaloric Effect in a Frustrated Gd-Garnet with No Long-Range Magnetic Order
Abstract not provided
Numerical study of the convective heat transfer coefficient of the hand and the effect of wind
Not Available
MCBI in an Electron-Ion Collider
The luminosity performance for an electron-ion collider demands high-current operation for both the electron and ion beams, for a wide range of collision energies. This poses many challenges on the beam stability with regard to collective effects. In this paper, we present preliminary estimations of coherent instabilities for both of the EIC designs, i.e., JLEIC and eRHIC. Mitigation mechanisms or schemes envisioned for suppression of the instabilities are also discussed.
Application of consumer RGB-D cameras for fruit detection and localization in field: A critical review
Not Available
Statistics of the NiCoCr medium-entropy alloy: Novel aspects of an old puzzle
Abstract We study the K -state phenomenon in the NiCoCr medium-entropy alloy using first-principles techniques jointly with the efficient Wang–Landau Monte Carlo and simulated annealing algorithms. Our theoretical results successfully explain the existence of the peak around 940 K in the experimental specific heat curve that characterizes the K -state phenomenon and give a fine picture of its atomic origin. The peak is caused by the maximum change of the local configurations characterized by the short-range-order (SRO) parameters at that temperature. The maximum change in SRO parameters is dominated by the nearest-neighbor interactions of atoms but substantially tuned by the many-body interactions. One surprising aspect revealed by the reciprocal-space SRO parameters is that the Ni–Co pair distribution is not random even above the ordering transition temperature, dramatically different from Ni–Cr and Co–Cr, indicating the system cannot be treated as a pseudo binary alloy. This prototypical example shows the complicated nature of multicomponent alloys, different from binary alloys. Our methods can be directly used to study the important K -state phenomenon observed in a number of other composition-concentrated alloys regardless of their number of components.
Experimental observations of large changes in electron density distributions in β - Ge
We report the electron density distributions in β-Ge have been experimentally determined at in situ high-pressure conditions using synchrotron diffraction techniques in a diamond anvil cell. Upon decompression, the electron density along the $c$ axis in tetragonal β-Ge displays a sudden drop at 10–11 GPa close to that of the structural α-β transition, while the β-Ge samples remain as single crystals until transforming to metastable Ge phases around 6.7–8.5 GPa. In contrast to the covalently bonded α-Ge that displays only a weak participation of $d$ electrons in the valence band under compression above 7.7 GPa, our experimental results suggest that a large change in $d$-orbital participation can occur in the β-Ge lattice which has mixed covalent and metallic bonding. The β-Ge below 10 GPa may display large fluctuations in electronic properties, which sheds light for exploring novel materials with intriguing electronic and optical properties.
Gas hydrate exploitation using CO2/H2 mixture gas by semi-continuous injection-production mode
Not Available
Synthesizing radioisotopes using an energy recovery linac
An apparatus and method for the production of radioisotopes utilizing an energy recovery linac. The ERL system is composed of an electron beam source, multiple superconducting radio frequency cavities operating at 4.5 K, a thin radiator, a target material, and a beam dump. The accompanying method discloses the use of the ERL system to generate desired radioisotopes via target interaction with bremsstrahlung photons while allowing recovery of a substantial portion of the electron beam energy before the beam is extracted to the beam dump.
First-principles study of the solute segregation in twin boundaries in Mg and possible descriptors for mechanical properties
Not Available
Interfacial and electronic properties of heterostructures of MXene and graphene
MXene-based heterostructures have received considerable interest owing to their unique properties. In this paper, we examine various heterostructures of the prototypical MXene Ti 3 C 2 T 2 (T=O, OH, F; terminal groups) and graphene using density-functional theory. We find that the adhesion energy, charge transfer, and band structure of these heterostructures are sensitive not only to the surface functional group, but also to the stacking order. Due to its greatest difference in work function with graphene, Ti 3 C 2 (OH) 2 has the strongest interaction with graphene, followed by Ti 3 C 2 O 2 and then Ti 3 C 2 F 2 . Electron transfers from Ti 3 C 2 (OH) 2 to graphene but from graphene to Ti 3 C 2 O 2 and Ti 3 C 2 F 2 , which causes a shift in the Dirac point of the graphene bands in the heterostructures of monolayer graphene and monolayer MXene. In the heterostructures of bilayer graphene and monolayer MXene, the interface breaks the symmetry of the bilayer graphene; in the case of the AB-stacking bilayer, the electron transfer leads to an interfacial electric field that opens up a gap in the graphene bands at the K point. This internal polarization strengthens both the interfacial adhesion and the cohesion between the two graphene layers. The MXene-graphene-MXene and graphene-MXene-graphene sandwich structures behave as two mirror-symmetric MXene-graphene interfaces. In conclusion, our first-principles studies provide a comprehensive understanding for the interaction between a typical MXene and graphene.
Electromagnetic Wave-Absorbing Properties of Steel Slag
This research explores the electromagnetic radiation protection function of steel slag for use as a building material. Scanning electron microscopy, x-ray diffraction, x-ray photoelectron spectroscopy and Mössbauer spectroscopy were used to analyze the chemical composition and mineralogical phase of steel slag powder. Electromagnetic parameters of the samples were analyzed and discussed in detail for the frequency range of 1-18 GHz. We found that steel slag had the electromagnetic wave-absorbing property due to electric components (such as FeO and carbon powder) and magnetic components [such as magnetite (Fe{sub 3}O{sub 4}) and hematite (α-Fe{sub 2}O{sub 3})]; electric loss was far greater than magnetic loss. With the increasing milling time, the electric and magnetic properties were increased. The calculated reflectivity curve of steel slag powder epoxide resin–matrix composite at a thickness of 10 mm had several interference peaks, and the absorbing properties increased gradually with increasing frequency. Moreover, the minimum reflectivity was − 21 dB (Decibel) at 13 GHz (Gigahertz). The steel slag powder cement-based composite showed electromagnetic wave-absorbing properties at 10-18 GHz, and the greatest absorption of the 25 mm sample reached 11.5 dB; therefore, the steel slag shows promise as a building material for electromagnetic protection.
Facile sol-gel foaming synthesized nano foam Bi2Mo3O12 as novel photocatalysts for Microcystis aeruginosa treatment
Highlights: • A novel nano foam Bi{sub 2}Mo{sub 3}O{sub 12} catalyst with high specific surface area was prepared through a facile sol-gel foaming technology. • Bi{sub 2}Mo{sub 3}O{sub 12} exhibited excellent photocatalytic activity for treating cyanobacteria.∙O{sub 2}{sup −} is the main active specie during the system. • The obtained Bi{sub 2}Mo{sub 3}O{sub 12} nanocrystals showed superior stability and reusability. - Abstract: Novel nano foam Bi{sub 2}Mo{sub 3}O{sub 12} with high specific surface area was prepared through a facile sol-gel foaming technology. It was found for the first time that the obtained nano foam Bi{sub 2}Mo{sub 3}O{sub 12} exhibited excellent photocatalytic activity for treating Microcystis aeruginosa under visible light irradiation. Microcystis aeruginosa damage process was monitored by measuring chlorophyll-a content, L-glutathione content, and malondialdehyd content of the treated Microcystis aeruginosa suspension. Trapping experiment revealed that ∙O{sub 2}{sup −} is the main active specie in the catalytic system. Also the catalyst had superior stability and reusability.
Atomic imprinting into metallic glasses
Abstract Nanoimprinting by thermoplastic forming has attracted significant attention due to its promise of low-cost fabrication of functionalized surfaces and nanostructured devices, and metallic glasses have been identified as a material class ideally suited for nanoimprinting. In particular, their featureless atomic structure suggests that there may not be an intrinsic size limit to the material’s ability to replicate a mould. Here we demonstrate atomic-scale imprinting into a platinum-based metallic glass alloy under ambient conditions using atomic step edges of a strontium titanate single crystal as a mould. The moulded metallic glass replicates the ‘atomic smoothness’ of the strontium titanate, with identical roughness to the one measured on the mould even after multiple usages and with replicas exhibiting an exceptional long-term stability of years. By providing a practical, reusable, and potentially high-throughput approach for atomic imprinting, our findings may open novel applications in surface functionalization through topographical structuring.