Engineering Papers⌕ Search

Engineering topics

Li, Rui

Publications and source records attributed to Li, Rui.

At least 73 records · Page 4

Asymmetric K/Li-Ion Battery Based on Intercalation Selectivity

In this paper, using ab initio calculations combined with experimental confirmation, we design an asymmetric intercalation battery using K 2 NiFe II (CN) 6 as the cathode, commercial graphite as the anode, and an organic electrolyte containing mixed lithium and potassium salts. It works by reversible K-ion intercalation at the cathode side and reversible Li-ion intercalation at the anode side simultaneously. The π-electron coordination environment in K 2 NiFe II (CN) 6 ensures the preferred reversible intercalation of the K-ion, and the small ionic radius ensures the preferred reversible intercalation of the Li-ion in graphite. Finally, it also shows a high working voltage (~3.6 V) and an ultralong cycling life with no capacity fading even after 5000 cycles.

25 ENERGY STORAGE↗

The poly-proline tail of SIVmac Vpx provides gain of function for resistance to a cryptic proteasome-dependent degradation pathway

The lentiviral accessory protein Vpx is critical for viral infection of myeloid cells and acts by hijacking CRL4(DCAF1) E3 ubiquitin ligase to induce the degradation of the host restriction factor SAMHD1. It has been observed that the sequences from HIV-2 and SIVsmm/SIVmac Vpx contain a poly-proline tail which is distinct from other SIV Vpx proteins. However, the role of this region in Vpx function is controversial. Herein, we found proteasome-dependent degradation of a Vpx mutant lacking the poly-proline tail in the nucleus in a CRL4(DCAF1) E3 ligase-independent fashion. Unlike wild-type Vpx, the poly-proline tail mutant Vpx is partly defective in enhancing viral infection in macrophages. Our findings suggest that during Vpx evolution, Vpx of the HIV-2/SIVsm/SIVmac lineage is targeted by a CRL4(DCAF1) E3 ligase-independent ubiquitination pathway, and have gained this interesting region, allowing them to maintain nuclear accumulation as part of their adaptation to host cell regulation. - Highlights: • The poly-proline motif is essential for SIVmac Vpx resistance to a CRL4(DCAF1) E3 ligase-independent proteasome degradation. • The poly-proline tail confers the nuclear accumulation of Vpx. • The poly-proline tail enhances the ability of Vpx to promote viral infection of macrophages.

60 APPLIED LIFE SCIENCES↗

The implications of dust ice nuclei effect on cloud top temperature in a complex mesoscale convective system

Mineral dust is the most important natural source of atmospheric ice nuclei (IN) which may significantly mediate the properties of ice cloud through heterogeneous nucleation and lead to crucial impacts on hydrological and energy cycle. The potential dust IN effect on cloud top temperature (CTT) in a well-developed mesoscale convective system (MCS) was studied using both satellite observations and cloud resolving model (CRM) simulations. We combined satellite observations from passive spectrometer, active cloud radar, lidar, and wind field simulations from CRM to identify the place where ice cloud mixed with dust particles. For given ice water path, the CTT of dust-mixed cloud is warmer than that in relatively pristine cloud. The probability distribution function (PDF) of CTT for dust-mixed clouds shifted to the warmer end and showed two peaks at about -45°C and -25°C. The PDF for relatively pristine cloud only show one peak at -55°C. Cloud simulations with different microphysical schemes agreed well with each other and showed better agreement with satellite observations in pristine clouds, but they showed large discrepancies in dust-mixed clouds. Some microphysical schemes failed to predict the warm peak of CTT related to heterogeneous ice formation.

54 ENVIRONMENTAL SCIENCES↗

Salicylates promote mitochondrial biogenesis by regulating the expression of PGC-1α in murine 3T3-L1 pre-adipocytes

Mitochondrial dysfunction has been associated with insulin resistance and diabetes. Decreased mitochondrial density and mitochondrial copy numbers have been found in insulin-resistant individuals. Restoration of the number of mitochondria and normal mitochondrial function has become an important therapeutic target of diabetes. Salicylate, the main active ingredient in aspirin, has been in medicinal use since ancient times. Little information regarding the effects of salicylate on mitochondrial function has been reported. In this study, we assessed the effects of salicylate on the peroxisome proliferator-activated receptor γ coactivator 1α (PGC-1α) signaling pathway and mitochondrial biogenesis in pre-adipocytes. Our findings demonstrate that treatment with salicylate promoted the expression of PGC-1α and its downstream targets nuclear respiratory factor 1 (NRF1) and mitochondrial transcription factor A (TFAM). Importantly, salicylate treatment significantly increased the number of mDNA, citrate synthase activity, expression of respiratory chain complex I, and mitochondrial mass, which were suppressed by the specific AMPK inhibitor Compound C. Indeed, salicylate treatment induced the phosphorylation of AMPK, which was involved in the induction of PGC-1α, NRF1, and TFAM. Importantly, inhibition of PGC-1α expression using PGC-1α small RNA interference abolished the effects of salicylate on mitochondrial biogenesis. These results suggest that salicylate has a potential therapeutic capacity against mitochondrial dysfunction in diabetes. - Highlights: • First time to show that salicylate promotes the expressions of PGC-1α, NRF1, TFAM. • First time to show that salicylate stimulates mitochondrial biogenesis. • AMPK mediates the effect of salicylate on PGC-1α expression. • Suggesting the roles of salicylate in mitochondrial dysfunction related disease.

60 APPLIED LIFE SCIENCES↗

Simulation Study on JLEIC High Energy Bunched Electron Cooling

In the Jefferson Lab (JLab) Electron Ion Collider (JLEIC) project the traditional electron cooling technique is used to reduce the ion beam emittance at the booster ring, and to compensate the intrabeam scattering effect and maintain the ion beam emittance during the collision at the collider ring. Different with other electron coolers using DC electron beam, the proposed electron cooler at the JLEIC ion collider ring uses high energy bunched electron beam, provided by an ERL. In this paper, we report the new electron cooling simulation program developed at JLab to fulfil specific simulation requirements of JLEIC and some recent simulation study on how the electron cooling rate will be affected by the bunched electron beam properties, such as the correlation between the longitudinal position and momentum, the bunch size, and the Larmor emittance.

Zhang, He↗

Estimations of Coherent Instabilities for JLEIC

JLEIC is the medium energy electron-ion collider currently under active design at Jefferson Lab*. The design goals of JLEIC are both high luminosity (1033-1034 cm-2ses-1) and high polarization (>70%) for the electron and light ion beams, for a wide range of electron and ion beam energies and for a wide spectrum of ion species. The unprecedented luminosity goal for this electron-ion collider sets strong requirements for the understanding and management of potential collective effects in JLEIC. In this paper, we present preliminary estimations of single and coupled bunch coherent instabilities for the electron and proton beams at collision energies for the JLEIC design. Further improvement of the estimations and mitigation methods are discussed.

43 PARTICLE ACCELERATORS↗

Entrance and Exit CSR Impedance for Non-Ultrarelativistic Beam

For a high-brightness electron beam being transported through beamlines involving bending systems, the coherent synchrotron radiation (CSR) and longitudinal space charge (LSC) interaction could often cause microbunching instability. The semi-analytical Vlasov solver for microbunching gain* depends on the impedances for the relevant collective effects. The existing results for CSR impedances are usually obtained for the ultrarelativistic limit. To extend the microbunching analysis to cases of low energies, such as the case of an ERL merger, or to density modulations at extremely small wavelength, it is necessary to extend the impedance analysis to the non-ultrarelativistic regime. In this study, we present the impedance analysis for the transient CSR interaction in the non-ultrarelativistic regime, for transients including both entrance to and exit from a magnetic dipole. These impedance results will be compared to their ultra-relativistic counterparts**, and the corresponding wakefield obtained from the impedance for low-energy beams will be compared with the existing results of transient CSR wakefield for general beam energies***.

Li, Rui↗

Fast multipole method using Cartesian tensor in beam dynamic simulation

Here, the fast multipole method (FMM) using traceless totally symmetric Cartesian tensor to calculate the Coulomb interaction between charged particles will be presented. The Cartesian tensor-based FMM can be generalized to treat other non-oscillating interactions with the help of the differential algebra or the truncated power series algebra. Issues on implementation of the FMM in beam dynamic simulations are also discussed.

43 PARTICLE ACCELERATORS↗

In-Plane Deformation Mechanics for Highly Stretchable Electronics

Scissoring in thick bars suppresses buckling behavior in serpentine traces that have thicknesses greater than their widths, as detailed in a systematic set of analytical and experimental studies. Scissoring in thick copper traces enables elastic stretchability as large as ≈350%, corresponding to a sixfold improvement over previously reported values for thin geometries (≈60%).

36 MATERIALS SCIENCE↗

Development of the electron cooling simulation program for MEIC

In the medium energy electron ion collider (MEIC) project at Jefferson Lab, the traditional electron cooling technique is used to reduce the ion beam emittance at the booster ring, and to compensate the intrabeam scattering effect and maintain the ion beam emittance during collision at the collider ring. A DC cooler at the booster ring and a bunched beam cooler at the collider ring are proposed. To fulfil the requirements of the cooler design for MEIC, we are developing a new program, which allows us to simulate the following cooling scenarios: DC cooling to coasting ion beam, DC cooling to bunched ion beam, bunched cooling to bunched ion beam, and bunched cooling to coasting ion beam. The new program has been benchmarked with existing code in aspect of accuracy and efficiency. The new program will be adaptive to the modern multicore hardware. We will present our models and some simulation results.

Zhang, He↗

MgZnO High Voltage Thin Film Transistors on Glass for Inverters in Building Integrated Photovoltaics

Building integrated photovoltaics (BIPV) have attracted considerable interests because of its aesthetically attractive appearance and overall low cost. In BIPV, system integration on a glass substrate like windows is essential to cover a large area of a building with low cost. But, the conventional high voltage devices in inverters have to be built on the specially selected single crystal substrates, limiting its application for large area electronic systems, such as the BIPV. We demonstrate a Magnesium Zinc Oxide (MZO) based high voltage thin film transistor (HVTFT) built on a transparent glass substrate. We designed devices with unique ring-type structures and use modulated Mg doping in the channel - gate dielectric interface, resulting in a blocking voltage of over 600 V. In addition to BIPV, the MZO HVTFT based inverter technology also creates new opportunities for emerging self-powered smart glass.

14 SOLAR ENERGY↗

Engineering Crystal Modifiers: Bridging Classical and Nonclassical Crystallization

The use of growth modifiers in natural, biological, and synthetic crystallization is a ubiquitous strategy for controlling growth and achieving desired physicochemical properties. For crystals that grow classically (i.e., monomer-by-monomer addition), theories of crystallization are well established and the field of growth modification is rather mature, although many questions remain regarding the molecular driving forces of modifier–crystal interactions. A new frontier in crystallization is the application of classical methods to tailor materials that grow nonclassically (i.e., growth by the addition of species more complex than monomers). A recent surge of interest and activity in this field has been driven by mounting evidence of both inorganic and organic materials that grow via nonclassical pathways. In these systems, the challenge of elucidating the mechanism(s) of crystallization is underscored by a diversity of growth units that far outnumber those available for classical routes. In this Perspective, we consider growth modification in nonclassical crystallization, including examples in the literature, the challenges associated with elucidating the modes of modifier action, and to what degree classical theories can be applied to these complex problems as a means of establishing versatile blueprints for crystal engineering.

36 MATERIALS SCIENCE↗

Real-time measurements of secondary organic aerosol formation and aging from ambient air in an oxidation flow reactor in the Los Angeles area

Field studies in polluted areas over the last decade have observed large formation of secondary organic aerosol (SOA) that is often poorly captured by models. The study of SOA formation using ambient data is often confounded by the effects of advection, vertical mixing, emissions, and variable degrees of photochemical aging. An oxidation flow reactor (OFR) was deployed to study SOA formation in real-time during the California Research at the Nexus of Air Quality and Climate Change (CalNex) campaign in Pasadena, CA, in 2010. A high-resolution aerosol mass spectrometer (AMS) and a scanning mobility particle sizer (SMPS) alternated sampling ambient and reactor-aged air. The reactor produced OH concentrations up to 4 orders of magnitude higher than in ambient air. OH radical concentration was continuously stepped, achieving equivalent atmospheric aging of 0.8 days–6.4 weeks in 3 min of processing every 2 h. Enhancement of organic aerosol (OA) from aging showed a maximum net SOA production between 0.8–6 days of aging with net OA mass loss beyond 2 weeks. Reactor SOA mass peaked at night, in the absence of ambient photochemistry and correlated with trimethylbenzene concentrations. Reactor SOA formation was inversely correlated with ambient SOA and O x , which along with the short-lived volatile organic compound correlation, indicates the importance of very reactive ( τ OH ~ 0.3 day) SOA precursors (most likely semivolatile and intermediate volatility species, S/IVOCs) in the Greater Los Angeles Area. Evolution of the elemental composition in the reactor was similar to trends observed in the atmosphere (O : C vs. H : C slope ~ –0.65). Oxidation state of carbon (OSc) in reactor SOA increased steeply with age and remained elevated (OS C ~ 2) at the highest photochemical ages probed. The ratio of OA in the reactor output to excess CO (ΔCO, ambient CO above regional background) vs. photochemical age is similar to previous studies at low to moderate ages and also extends to higher ages where OA loss dominates. The mass added at low-to-intermediate ages is due primarily to condensation of oxidized species, not heterogeneous oxidation. The OA decrease at high photochemical ages is dominated by heterogeneous oxidation followed by fragmentation/evaporation. A comparison of urban SOA formation in this study with a similar study of vehicle SOA in a tunnel suggests the importance of vehicle emissions for urban SOA. Pre-2007 SOA models underpredict SOA formation by an order of magnitude, while a more recent model performs better but overpredicts at higher ages. Furthermore, these results demonstrate the value of the reactor as a tool for in situ evaluation of the SOA formation potential and OA evolution from ambient air.

54 ENVIRONMENTAL SCIENCES↗

Strain field of the monovacancy in silicene: First-principles study

The in-plane strain fields of single-vacancy silicene with different monovacancy (MV) concentrations, as well as the corresponding electronic band structures, are investigated by using the first-principle calculations. Firstly the self-healing MV is found to be the most stable ground structure in silicene, which is different from the other 2D hexagonal honeycomb materials, e.g. graphene, h-BN. In the isolated MV center, the bonds along the pentagons are compressed, creating a compress field, and those close to the distorted hexagons are stretched, creating a stretch field. As the MV concentration increasing, the interacted compress field tends to corrugate the defected silicene, while the interacted stretch field impacts little on the low-buckled structure. Especially, the corrugation presents in those supercells with small MV concentration, just as the (4, 5), (4, 6), (4, 7), (4, 8) supercells. The corrugations approach zero at both low and high MV concentrations, and the (4, 6) supercell with a MV concentration of about 0.021, has a peak value of 3.23Å. The electronic calculations show that the linear dispersion at Γ point in pristine silicene is broken by the lower lattice symmetry of the self-healing MV reconstruction, which translates it into metal as well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗