Engineering Papers⌕ Search

Engineering topics

Li, Jing

Publications and source records attributed to Li, Jing.

At least 253 records · Page 14

Controllable deuteration of halogenated compounds by photocatalytic D2O splitting

Deuterium labeling is of great value in organic synthesis and the pharmaceutical industry. However, the state-of-the-art C–H/C–D exchange using noble metal catalysts or strong bases/acids suffers from poor functional group tolerances, poor selectivity and lack of scope for generating molecular complexity. Herein, we demonstrate the deuteration of halides using heavy water as the deuteration reagent and porous CdSe nanosheets as the catalyst. The deuteration mechanism involves the generation of highly active carbon and deuterium radicals via photoinduced electron transfer from CdSe to the substrates, followed by tandem radicals coupling process, which is mechanistically distinct from the traditional methods involving deuterium cations or anions. Our deuteration strategy shows better selectivity and functional group tolerances than current C–H/C–D exchange methods. Extending the synthetic scope, deuterated boronic acids, halides, alkynes, and aldehydes can be used as synthons in Suzuki coupling, Click reaction, C–H bond insertion reaction etc. for the synthesis of complex deuterated molecules.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

1D SbSeI, SbSI, and SbSBr With High Stability and Novel Properties for Microelectronic, Optoelectronic, and Thermoelectric Applications

Mechanical exfoliation of 2D materials has triggered an explosive interest in lowdimensional material research. We extend this idea to 1D van derWaals materials. Three 1D semiconductors (SbSeI, SbSI and SbSBr) with high stability and novel electronic properties are discovered using first principles calculations. Both the dynamical and the thermal stability of these 1D materials are examined. We demonstrate that their nanowire thinner than 7 Å can be easily obtained by mechanical exfoliation, hydrothermal method or sonochemical method. The bulk-to-1D transition results in dramatic changes in band gap, effective mass and static dielectric constant due to quantum confinement, making 1D SbSeI a highly promising channel material for transistors with gate length shorter than 1 nm. Under small uniaxial strain, these materials are transformed from indirect into direct band gap semiconductors, paving the way for optoelectronic devices and mechanical sensors. Moreover, the thermoelectric performance of these materials is significantly improved over their bulk counterparts. These highly desirable properties render SbSeI, SbSI and SbSBr promising 1D materials for applications in future microelectronics, optoelectronics, mechanical sensors, and thermoelectrics.

36 MATERIALS SCIENCE↗

A Study of the Physical Properties of Li-Ion Battery Electrolytes Containing Esters

Adding esters as co-solvents to Li-ion battery electrolytes can improve low-temperature performance and rate capability of cells. This work uses viscosity and electrolytic conductivity measurements to evaluate electrolytes containing various ester co-solvents, and their suitability for use in high-rate applications is probed. Among the esters studied, methyl acetate (MA) outperforms other esters in its impact on the conductivity and viscosity of the electrolyte. Therefore, viscosity and conductivity were measured as a function of temperature and LiPF 6 concentration for electrolytes ethylene carbonate (EC): linear carbonate: MA in the ratio 30:(70-x):x, where linear carbonate = {ethyl methyl carbonate (EMC), dimethyl carbonate (DMC)}, and x = {0, 10, 20, 30}. Adding MA leads to an increase in conductivity and decrease in viscosity over all conditions. Calculations of electrolyte properties from a model based on a statistical-mechanical framework, the Advanced Electrolyte Model (AEM), are compared to all measurements and excellent agreement is found. All electrolytes studied roughly agree with a Stokes’ Law model of conductivity. In conclusion, a Walden analysis shows that the ionicity of the electrolyte is not significantly impacted by either MA content or LiPF 6 concentration. Li[Ni 0.5 Mn 0.3 Co 0.2 ]O 2 /graphite cells containing MA were cycled at charging rates up to 2C and showed improved cycling performance.

25 ENERGY STORAGE↗

Two-Dimensional Holey Nanoarchitectures Created by Confined Self-Assembly of Nanoparticles via Block Copolymers: From Synthesis to Energy Storage Property

Advances in liquid-phase exfoliation and surfactant-directed anisotropic growth of two-dimensional (2D) nanosheets have enabled their rapid development. However, it remains challenging to develop assembly strategies that lead to the construction of 2D nanomaterials with well-defined geometry and functional nanoarchitectures that are tailored to specific applications. Here we report a facile self-assembly method leading to the controlled synthesis of 2D transition metal oxide (TMO) nanosheets containing a high density of holes. We utilize graphene oxide sheets as a sacrificial template and Pluronic copolymers as surfactant. By using ZnFe 2 O 4 (ZFO) nanoparticles as a model material, we demonstrate that by tuning the molecular weight of the Pluronic copolymers that we can incorporate the ZFO particles and tune the size of the holes in the sheets. The resulting 2D ZFO nanosheets offer synergistic characteristics including increased electrochemically active surface areas, shortened ion diffusion paths, and strong inherent mechanical properties, leading to enhanced lithium-ion storage properties. Post-cycling characterization confirms that the samples maintain structural integrity after electrochemical cycling. In conclusion, our findings demonstrate that this template-assisted self-assembly method is a useful bottom-up route for controlled synthesis of 2D nanoarchitectures, and these holey 2D nanoarchitectures are promising for improving the electrochemical performance of nextgeneration lithium-ion batteries.

25 ENERGY STORAGE↗

Salinization of porewater in a multiple aquitard-aquifer system in Jiangsu coastal plain, China

Chemical and isotopic compositions were analyzed in porewater squeezed from a clayey aquitard in Jiangsu coastal plain, eastern China, to interpret the salinity origin, chemical evolution and water-mass mixing process. A strong geochemical fingerprint was obtained with an aligned Cl/Br ratio of 154 in the salinized aquitard porewater over a wide Cl{sup −} concentration range (396–9,720 mg/L), indicating that porewater salinity is likely derived from a mixing with old brine with a proportion of less than 20%. Very small contributions of brine exerted limited effects on water stable isotopes. The relationships between porewater δ{sup 18}O and δD indicate that shallow and intermediate porewaters could be original seawater and were subsequently diluted with modern meteoric water, whereas deep porewaters with depleted stable isotopic values were probably recharged during a cooler period and modified by evaporation and seawater infiltration. The cation–Cl relationship and mineralogy of associated strata indicate that porewater has been chemically modified by silicate weathering and ion-exchange reactions. {sup 87}Sr/{sup 86}Sr ratios of 0.7094–0.7112 further confirm the input source of silicate minerals. Numerical simulations were used to evaluate the long-term salinity evolution of the deep porewater. The alternations of boundary conditions (i.e., the third aquifer mixed with brine at approximately 70 ka BP, followed by recharge of glacial meltwater at 20–25 ka BP, and then mixing with Holocene seawater at 7–10 ka BP) are responsible for the shift in porewater salinity. These timeframes correspond with the results of previous studies on ancient marine transgression-regression in Jiangsu coastal plain.

58 GEOSCIENCES↗

Control of Carbide Precipitation During Electroslag Remelting-Continuous Rapid Solidification of GCr15 Steel

The effect of the electroslag remelting-continuous rapid solidification (ESR-CRS) process on element segregation and carbide precipitation in GCr15 bearing steel was investigated. The results showed that a microstructure with fewer primary carbides and less segregation can be achieved via the ESR-CRS process. In the specimen subjected to ESR, the morphology of primary carbide changed from angular to lumplike. After the ESR-CRS process, the dimension of primary carbide and the mass fraction of Cr in primary carbide decreased. With the increase of cooling intensity during the ESR-CRS process, the microstructure of ESR ingot became more refined and uniform and the size of large primary carbides in ESR ingot gradually decreased. Suppressing the formation of grain boundary cementite and primary carbide during ESR of GCr15 steel is beneficial to inhibiting the presence of large secondary carbide formation after annealing. With the increase of cooling intensity, the mass fraction of carbides in ESR ingot decreased and the mass fraction of Cr in carbides increased, whereas the types of carbides did not change; all the M{sub 3}C, M{sub 3}C{sub 2}, and M{sub 7}C{sub 3} exist before and after ESR-CRS. Al{sub 2}O{sub 3} inclusions promoted the formation of Ti(N,C) by serving as preferred heterogeneous nucleation sites, whereas the formation of Ti(N,C) was suppressed through the refinement of Al{sub 2}O{sub 3} inclusions by increasing the cooling intensity.

36 MATERIALS SCIENCE↗

Correction to: Simultaneous Modification of Alumina and MgO·Al 2 O 3 Inclusions by Calcium Treatment During Electroslag Remelting of Stainless Tool Steel

In Table III, the correct value of first-order interaction parameter of Cr on S should be -0.0105, rather than 0.0105. It should be stressed that the thermodynamic calculation associated with this parameter was performed using e S Cr = - 0.0105 in the published article. Thus, all calculated results associated with this parameter are correct in this article.

36 MATERIALS SCIENCE↗

TRIP6 promotes cell proliferation in hepatocellular carcinoma via suppression of FOXO3a

Highlights: • TRIP6 was upregulated in HCC cells and tissue. • TRIP6 expression was correlated with HCC patients’ clinical stage and poor survival. • TRIP6 enhanced the proliferation of HCC cells via suppression of FOXO3a. • TRIP6 may serve as a novel prognostic biomarker and therapeutic target in HCC. Thyroid hormone receptor-interacting protein 6 (TRIP6), a member of LIM family, acts as an adaptor protein and is overexpressed in several tumor types. However, the clinical significance and biological role of TRIP6 in HCC remains unknown. In our study, we found that TRIP6 was markedly overexpressed in HCC cells and clinical specimens compared with normal hepatocytes and adjacent non-tumor tissues. Immunohistochemical and statistical analysis showed that the expression of TRIP6 significantly correlated with HCC patients' clinical stage and poor survival. Moreover, we demonstrated that overexpressing TRIP6 significantly enhanced, whereas silencing endogenous TRIP6 inhibited, the proliferation and the anchorage-independent growth ability of HCC cells. In addition, overexpression of TRIP6 accelerated, while inhibition of TRIP6 retarded, G1-S phase transition in HCC cells. We further found that overexpression of TRIP6 increased the activation of AKT and suppressed the transactivity of FOXO3a. Meanwhile, overexpression of TRIP6 leaded to the decreased expression of cyclin-dependent kinase inhibitors p21{sup Cip1} and p27{sup Kip1} and increased expression of the cell cycle regulator cyclin D1. While silencing TRIP6 triggered the opposite effect. Taken together, these findings showed that TRIP6 plays an important role in promoting HCC cells proliferation and may serve as a novel prognostic biomarker and therapeutic target in HCC.

60 APPLIED LIFE SCIENCES↗

First-principles study on the electronic, optical, and transport properties of monolayer α- and β-GeSe

The extraordinary properties and the novel applications of black phosphorene induce the research interest in the monolayer group-IV monochalcogenides. Here using first-principles calculations, we systematically investigate the electronic, transport, and optical properties of monolayer α- and β-GeSe, revealing a direct band gap of 1.61 eV for monolayer α-GeSe and an indirect band gap of 2.47 eV for monolayer β-GeSe. For monolayer β-GeSe, the electronic/hole transport is anisotropic, with an extremely high electron mobility of 2.93×104cm2/Vs along the armchair direction, comparable to that of black phosphorene. However, for β-GeSe, robust band gaps nearly independent of the applied tensile strain along the armchair direction are observed. Both monolayer α- and β-GeSe exhibit anisotropic optical absorption in the visible spectrum.

36 MATERIALS SCIENCE↗

Metal-organic frameworks derived platinum-cobalt bimetallic nanoparticles in nitrogen-doped hollow porous carbon capsules as a highly active and durable catalyst for oxygen reduction reaction

Pt-based nanomaterials are regarded as the most efficient electrocatalysts for the oxygen reduction reaction (ORR) in proton exchange membrane fuel cells (PEMFCs). However, widespread adoption of PEMFCs requires solutions to major challenges encountered with ORR catalysts, namely high cost, sluggish kinetics, and low durability. In this paper, a new efficient method utilizing Co-based metal-organic frameworks is developed to produce PtCo bimetallic nanoparticles embedded in unique nitrogen-doped hollow porous carbon capsules. The obtained catalyst demonstrates an outstanding ORR performance, with a mass activity that is 5.5 and 13.5 times greater than that of commercial Pt/C and Pt black, respectively. Most importantly, the product exhibits dramatically improved durability in terms of both electrochemically active surface area (ECAS) and mass activity compared to commercial Pt/C and Pt black catalysts. Finally, the remarkable ORR performance demonstrated here can be attributed to the structural features of the catalyst (its alloy structure, high dispersion and fine particle size) and the carbon support (its nitrogen dopant, large surface area and hollow porous structure).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Chemical intuition for high thermoelectric performance in monolayer black phosphorus, α-arsenene and aW-antimonene

Identifying materials with intrinsically high thermoelectric performance remains a challenge even with the aid of a high-throughput search. Here, using a chemically intuitive approach based on the bond-orbital theory, three anisotropic 2D group-V materials (monolayer black phosphorus, α-arsenene, and aW-antimonene) are identified as candidates for high thermoelectric energy conversion efficiency. Concepts, such as bond length, bond angle, and bond strength, are used to explain the trends in their electronic properties, such as the band gap and the effective mass. Our first principles calculations confirm that high carrier mobilities and large Seebeck coefficients can be obtained at the same time in these materials, due to complex Fermi surfaces originating from the anisotropic structures. An intuitive understanding of how the bonding character affects phonon transport is also provided with emphasis on the importance of bonding strength and bond anharmonicity. High thermoelectric performance is observed in these materials. In conclusion, our approach provides a powerful tool to identify new thermoelectric materials and evaluate their transport properties.

30 DIRECT ENERGY CONVERSION↗

Portable Medical Diagnosis Instrument

A system that integrates several technologies into a single, portable medical diagnostic apparatus for analyzing a sample body fluid (liquid and/or gas): (1) a mechanism to capture airborne microdroplets and to separate the body fluid into a first fluid component (primarily gas) and a second fluid component (primarily liquid); (2) a volatilizer to convert a portion of the second fluid component into a third fluid component that is primarily a gas; (3) a functionalized nanostructure (NS) array configured to receive, identify, and estimate concentration of at least one constituent in the first and/or third fluid components; (4) a miniaturized differential mobility spectrometer (DMS) module; and (5) a biomarker sensor, to detect volatile and non-volatile molecules in a sample fluid, which may contain one or more components of blood, breath, perspiration, saliva, and urine.

Straume, Tore↗