Engineering topics
Li, Jing
Publications and source records attributed to Li, Jing.
Activated hepatic stellate cells directly induce pathogenic Th17 cells in chronic hepatitis B virus infection
Th17 cells are involved in liver fibrosis by activating hepatic stellate cells (HSCs). We aimed to investigate whether HSCs are able to regulate the function of Th17 cells and to determine the relevant mechanism. Sixty-five patients diagnosed with chronic hepatitis B (CHB) were enrolled in this study. To determine the effect of HSCs on T cells, naïve CD4{sup +}T cells and Th17 cells were sorted from CHB patients and cultured with or without activated-HSCs, and cytokine expression and gene transcription were analyzed. In addition, the regulatory mechanism of HSCs was investigated. ELISA and qRT-PCR showed that Th17 cells from CHB patients were more pathogenic, on the basis of the expression of IL-17A, IL-23R, RORC, CCL20 and CCR6, and meanwhile, they could activate the primary HSCs. Co-culture experiments indicated that activated HSCs dramatically promoted proliferation of CD4{sup +}T cells in a time- and dose-dependent manner. In addition, they could induce naïve CD4{sup +}T cells to become Th17 cells which had a more pathogenic phenotype. Moreover, activated HSCs-mediated induction of Th17 cells might depend on the release of IL-1β and IL-6 as well as on the COX-PGE2 pathway. Th17 cells cooperated with HSCs in a proinflammatory feedback loop might provide a better understanding of the pathogenic role of Th17 cells in the chronicity of HBV infection. - Highlights: • Th17 cells from CHB patients promoted the activation of primary HSCs. • Activated HSCs induced Th17 cells which displayed a pathogenic phenotype. • The induction of Th17 cells by activated HSCs depended on IL-1β and IL-6 release as well as on the COX-PGE2 pathway.
A Comet Active Beyond the Crystallization Zone
We present observations showing inbound long-period comet C/2017 K2 (PANSTARRS) to be active at a record heliocentric distance. Nucleus temperatures are too low (60–70 K) either for water ice to sublimate or for amorphous ice to crystallize, requiring another source for the observed activity. Using the Hubble Space Telescope we find a sharply bounded, circularly symmetric dust coma 10{sup 5} km in radius, with a total scattering cross-section of ∼10{sup 5} km{sup 2}. The coma has a logarithmic surface brightness gradient −1 over much of its surface, indicating sustained, steady-state dust production. A lack of clear evidence for the action of solar radiation pressure suggests that the dust particles are large, with a mean size ≳0.1 mm. Using a coma convolution model, we find a limit to the apparent magnitude of the nucleus V>25.2 (absolute magnitude H>12.9). With assumed geometric albedo p {sub V} = 0.04, the limit to the nucleus circular equivalent radius is <9 km. Prediscovery observations from 2013 show that the comet was also active at 23.7 au heliocentric distance. While neither water ice sublimation nor exothermic crystallization can account for the observed distant activity, the measured properties are consistent with activity driven by sublimating supervolatile ices such as CO{sub 2}, CO, O{sub 2}, and N{sub 2}. Survival of supervolatiles at the nucleus surface is likely a result of the comet’s recent arrival from the frigid Oort Cloud.
Discovery of PF-06928215 as a high affinity inhibitor of cGAS enabled by a novel fluorescence polarization assay
Cyclic GMP-AMP synthase (cGAS) initiates the innate immune system in response to cytosolic dsDNA. After binding and activation from dsDNA, cGAS uses ATP and GTP to synthesize 2', 3' -cGAMP (cGAMP), a cyclic dinucleotide second messenger with mixed 2'-5' and 3'-5' phosphodiester bonds. Inappropriate stimulation of cGAS has been implicated in autoimmune disease such as systemic lupus erythematosus, thus inhibition of cGAS may be of therapeutic benefit in some diseases; however, the size and polarity of the cGAS active site makes it a challenging target for the development of conventional substrate-competitive inhibitors. We report here the development of a high affinity (K D = 200 nM) inhibitor from a low affinity fragment hit with supporting biochemical and structural data showing these molecules bind to the cGAS active site. We also report a new high throughput cGAS fluorescence polarization (FP)-based assay to enable the rapid identification and optimization of cGAS inhibitors. This FP assay uses Cy5-labelled cGAMP in combination with a novel high affinity monoclonal antibody that specifically recognizes cGAMP with no cross reactivity to cAMP, cGMP, ATP, or GTP. Given its role in the innate immune response, cGAS is a promising therapeutic target for autoinflammatory disease. Our results demonstrate its druggability, provide a high affinity tool compound, and establish a high throughput assay for the identification of next generation cGAS inhibitors.
Capture of organic iodides from nuclear waste by metal-organic framework-based molecular traps
Effective capture of radioactive organic iodides from nuclear waste remains a significant challenge due to the drawbacks of current adsorbents such as low uptake capacity, high cost, and non-recyclability. We report here a general approach to overcome this challenge by creating radioactive organic iodide molecular traps through functionalization of metal-organic framework materials with tertiary amine-binding sites. The molecular trap exhibits a high CH 3 I saturation uptake capacity of 71 wt% at 150 °C, which is more than 340% higher than the industrial adsorbent Ag 0 @MOR under identical conditions. These functionalized metal-organic frameworks also serve as good adsorbents at low temperatures. Furthermore, the resulting adsorbent can be recycled multiple times without loss of capacity, making recyclability a reality. In combination with its chemical and thermal stability, high capture efficiency and low cost, the adsorbent demonstrates promise for industrial radioactive organic iodides capture from nuclear waste. The capture mechanism was investigated by experimental and theoretical methods.
A Tunable 3D Nanostructured Conductive Gel Framework Electrode for High-Performance Lithium Ion Batteries
This study develops a tunable 3D nanostructured conductive gel framework as both binder and conductive framework for lithium ion batteries. A 3D nanostructured gel framework with continuous electron pathways can provide hierarchical pores for ion transport and form uniform coatings on each active particle against aggregation. The hybrid gel electrodes based on a polypyrrole gel framework and Fe3O4 nanoparticles as a model system in this study demonstrate the best rate performance, the highest achieved mass ratio of active materials, and the highest achieved specific capacities when considering total mass, compared to current literature. This 3D nanostructured gelbased framework represents a powerful platform for various electrochemically active materials to enable the next-generation high-energy batteries.
Lithium Vanadium Oxide (Li 1.1 V 3 O 8 ) Coated with Amorphous Lithium Phosphorous Oxynitride (LiPON): Role of Material Morphology and Interfacial Structure on Resulting Electrochemistry
In the present work, lithium vanadium oxide (Li 1.1 V 3 O 8 ) particles synthesized at two different temperatures were coated with an amorphous lithium phosphorous oxynitride (LiPON) film for the first time, and the effects of the LiPON coating on the electrochemistry of the Li 1.1 V 3 O 8 materials with different morphologies were systematically investigated by comparing uncoated Li 1.1 V 3 O 8 and Li 1.1 V 3 O 8 coated with LiPON of various thicknesses. Galvanostatic discharge-charge cycling revealed increased functional capacity for the LiPON-coated materials. Post-cycling electrochemical impedance spectroscopy showed that LiPON-coated Li 1.1 V 3 O 8 materials developed less interfacial resistance with extended cycling, rationalized by vanadium migration into the LiPON coating seen by electron energy loss spectra. Post-mortem quantitative analysis of the anodes revealed more severe vanadium dissolution for the more irregularly shaped Li 1.1 V 3 O 8 materials with less LiPON coverage. Thus, this study highlights the specific benefits and limitations of LiPON coatings for stabilizing a moderate voltage Li 1.1 V 3 O 8 cathode material under extended cycling in liquid electrolyte, and describes a generally applicable approach for comprehensive characterization of a composite electroactive material which can be used to understand interfacial transport properties in other functional systems.
Visualization of structural evolution and phase distribution of a lithium vanadium oxide (Li 1.1 V 3 O 8 ) electrode via an operando and in situ energy dispersive X-ray diffraction technique
We present Li 1+n V 3 O 8 (n = 0–0.2) has been extensively investigated as a cathode material for Li ion batteries because of its superior electrochemical properties including high specific energy and good rate capability. In this paper, a synchrotron based energy dispersive X-ray diffraction (EDXRD) technique was employed to profile the phase transitions and the spatial phase distribution of a Li 1.1 V 3 O 8 electrode during electrochemical (de)lithiation in situ and operando. As annealing temperature during the preparation of the Li 1.1 V 3 O 8 material has a strong influence on the morphology and crystallinity, and consequently influences the electrochemical outcomes of the material, Li 1.1 V 3 O 8 materials prepared at two different temperatures, 500 and 300°C (LVO500 and LVO300), were employed in this study. The EDXRD spectra of LVO500 and LVO300 cells pre-discharged at C/18, C/40 and C/150 were recorded in situ, and phase localization and relative intensity of the peaks were compared. For cells discharged at the C/18 rate, although α and β phases were distributed uniformly within the LVO500 electrode, they were localized on two sides of the LVO300 electrode. Discharging rates of C/40 and C/150 led to homogeneous β phase formation in both LVO500 and LVO300 electrodes. Furthermore, the phase distribution as a function of position and (de)lithiation extent was mapped operando as the LVO500 cell was (de)lithiated. In conclusion, the operando data indicate that (1) the lithiation reaction initiated from the side of the electrode facing the Li anode and proceeded towards the side facing the steel can, (2) during discharge the phase transformation from a Li-poor to a Li-rich α phase and the formation of a β phase can proceed simultaneously in the electrode after the first formation of a β phase, and (3) the structural evolution occurring during charging is not the reverse of that during discharge and takes place homogenously throughout the electrode.
Anatomy of an Asteroid Breakup: The Case of P/2013 R3
We present an analysis of new and published data on P/2013 R3, the first asteroid detected while disintegrating. Thirteen discrete components are measured in the interval between UT 2013 October 01 and 2014 February 13. We determine a mean, pair-wise velocity dispersion among these components of Δv = 0.33 ± 0.03 m s{sup −1} and find that their separation times are staggered over an interval of ∼5 months. Dust enveloping the system has, in the first observations, a cross-section of ∼30 km{sup 2} but fades monotonically at a rate consistent with the action of radiation pressure sweeping. The individual components exhibit comet-like morphologies and also fade except where secondary fragmentation is accompanied by the release of additional dust. We find only upper limits to the radii of any embedded solid nuclei, typically ∼100–200 m (geometric albedo 0.05 assumed). Combined, the components of P/2013 R3 would form a single spherical body with a radius of ≲400 m, which is our best estimate of the size of the precursor object. The observations are consistent with rotational disruption of a weak (cohesive strength of ∼50 to 100 N m{sup −2}) parent body, ∼400 m in radius. Estimated radiation (YORP) spin-up times of this parent are ≲1 Myr, shorter than the collisional lifetime. If present, water ice sublimating at as little as 10{sup −3} kg s{sup −1} could generate a torque on the parent body rivaling the YORP torque. Under conservative assumptions about the frequency of similar disruptions, the inferred asteroid debris production rate is ≳10{sup 3} kg s{sup −1}, which is at least 4% of the rate needed to maintain the Zodiacal Cloud.
Vaccination efficacy with marrow mesenchymal stem cell against cancer was enhanced under simulated microgravity
Stem cell vaccination can induce consistent and strong anti-tumor immunity against cancer in mice model. The antigenic similarity between tumors and embryos has been appreciated for many years and reflects the expression of embryonic gene products by cancer cells and/or cancer-initiating stem cells. Taking advantage of this similarity, we have tested a prophylactic lung cancer vaccine composed of allogeneic murine MSCs. Based on this conception, we first compared their tumor vaccines intervention effects of adult MSCs and MSCs under simulated microgravity (MSC/SMG). In this study, BALB/c mice were vaccinated with MSCs or MSC/SMG, compared with mice vaccinated with phosphate buffered saline (PBS) as negative controls. We then subcutaneously implanted the A549 human lung cancer cell line into vaccinated mice and monitored tumor growth potential in vivo. The smaller tumor size and less tumor weight were observed in mice vaccinated with MSCs or MSC/SMG, compared with that of the Control group. Particularly, it was much more significant in the group of MSC/SMG than that group of the MSCs. Vaccination with SMG treated MSCs inhibited proliferation and promoted apoptosis of tumor tissue. SMG/MSC vaccination induced bothTh1-mediated cytokine response; CD8-dependent cytotoxic response which reduced the proportion of Treg cells. Furthermore, SMG/MSC vaccination significantly increased MHC1 and HSPs proteins expression. In conclusion, we demonstrated the SMG could improve tumor-suppressive activity of MSC. The enhanced anti-tumor immune response of MSCs/SMG was strongly associated with the higher expression of MHC class I molecule on DCs, and the abundance of HSPs in the SMG treated MSCs may make antigens in the MSC more cross-presentable to the host DCs for generating protective antitumor activity. This study gains an insight into the mechanism of MSCs anti-tumor efficacy and gives a new strategy for cancer therapies in the future. - Highlights: • Vaccination with SMG treated MSCs inhibited tumor growth. • SMG/MSC vaccination induced Th1-mediated cytokine response, elicited CD8-dependent cytotoxic response and reduced the proportion of Treg cells. • SMG/MSC vaccination increased MHC1 and HSPs proteins expression.
Poly(naphthalene diimide) vinylene: solid state red emission and semiconducting properties for transistors
Here in this work, a conjugated polymer PNV is developed, linking naphthalene diimide with a vinyl linkage. Owing to the C-H ∙∙∙O hydrogen bond between the carbonyl and the vinyl, PNV exhibits a high red emission with a quantum yield of 33.4% in the solid state while it shows n-type properties with an electron mobility up to 1.5 x 10 -3 cm 2 V -1 s -1 in organic field effect transistors, simultaneously.
Investigation of Structural Evolution of Li 1.1 V 3 O 8 by In Situ X-ray Diffraction and Density Functional Theory Calculations
Li 1.1 V 3 O 8 is a promising cathode material for Li-ion batteries, because of its high theoretical capacity (362 mAh g-1) and good rate performance. In this study, the structural evolution of Li 1.1 V 3 O 8 material during electrochemical dis(charge) processes was investigated using a combination of theoretical calculations and experimental data. Density functional theory (DFT) was used to predict the intermediate structures at various lithiation states, as well as the stability of major phases. In order to validate these predictions, in situ X-ray diffraction (XRD) data was collected operando, allowing for the phase transformations to be monitored under current load and eliminating the possibilities of structural relaxation processes and environmental oxidation. Rietveld refinement was performed to fit the diffraction data with the DFT-derived structures and to analyze the fractions of major phases as a function of dis(charge). The DFT calculations identified three stable states that were validated by the in situ XRD result: a Li-poor α-phase (Li1), a Li-rich α-phase (Li2.5), and a β-phase (Li4). The DFT-predicted particle shape based on the surface energy of the (100), (001), and (010) planes rationalized the preferential orientation of Li 1.1 V 3 O 8 particles along the [010] direction in the electrode. Furthermore, the onset and offset of the α → β transition, as well as the phase fractions of α and β determined via in situ XRD, related well with the DFT-derived relative stability of each phase. Thus, by integrating DFT calculations with experimental work, this work provides a thorough understanding of the structural transformations in Li 1.1 V 3 O 8 during electrochemical dis(charge).
Correlating Preparative Approaches with Electrochemical Performance of Fe 3 O 4 -MWNT Composites Used as Anodes in Li-Ion Batteries
Fe 3 O 4 nanoparticles (NPs) with an average size of 8-10 nm and a loading ratio of 50 wt% have been successfully attached onto the external surfaces of multi-walled carbon nanotubes (MWNTs) by means of three different preparative approaches, namely a sonication method, a covalent attachment protocol, as well as a non-covalent π-π interaction strategy. Specifically, the Fe 3 O 4 NPs associated with the sonication method lie directly on the outer surfaces of the MWNTs. Particles covalently attached onto the MWNTs formed amide chemical bonds through the mediation of the amorphous (3- aminopropyl) triethoxysilane (APTES) linker. Finally, particles were anchored noncovalently onto the underlying conjugated MWNTs via an aromatic 4-mercaptobenzoic acid (4-MBA) linker. Both structural and electrochemical characterization protocols have been used to systematically correlate the electrode performance with the corresponding attachment strategies. Fe3O4-MWNT composites generated by the π-π interaction strategy delivered 813, 768, 729, 796, 630, 580, 522, and 762 mAh/g under rates of 200, 400, 800, 100, 1200, 1600, 2000, and 100 mA/g, with 72% retention between cycles 2 and 80, demonstrating both higher capacity and better cycling stability as compared with analogues derived from the physical sonication as well as covalent attachment strategies. This finding may be attributed to the enhanced charge and ion transport coupled with retention of physical contact with the underlying MWNTs after a large volume change during cycling. Our collective results suggest that the non-covalent π-π attachment modality is a more effective preparative strategy for enhancing the performance of MWNT-Fe 3 O 4 composite electrodes after a full discharge process.
Simultaneous Modification of Alumina and MgO·Al{sub 2}O{sub 3} Inclusions by Calcium Treatment During Electroslag Remelting of Stainless Tool Steel
Calcium modification of both alumina and MgO·Al{sub 2}O{sub 3} inclusions during protective gas electroslag remelting (P-ESR) of 8Cr17MoV stainless steel and its effect on nitrides and primary carbides were studied by analyzing the transient evolution of oxide and sulfide inclusions in the P-ESR process. The oxide inclusions that were not removed during P-ESR without calcium treatment were found to retain their original state until in as-cast ingot. Calcium treatment modified all MgO·Al{sub 2}O{sub 3} and alumina inclusions that had not been removed in the P-ESR process to liquid/partially liquid CaO-Al{sub 2}O{sub 3}-(MgO) with uniformly distributed elements, in addition to a small proportion of partially modified inclusions of a CaO-MgO-Al{sub 2}O{sub 3} core surrounded by a liquid CaO-Al{sub 2}O{sub 3}. The modification of low-MgO-containing MgO·Al{sub 2}O{sub 3} inclusions involves the preferential reduction of MgO from the MgO·Al{sub 2}O{sub 3} inclusion by calcium and the reaction of calcium with Al{sub 2}O{sub 3} in the inclusion. It is the incomplete/complete reduction of MgO from the spinel by calcium that contributes to the modification of spinels. Alumina inclusions were liquefied by direct reaction with calcium. Calcium treatment during P-ESR refining also provided an effective approach to prevent the formation of nitrides and primary carbides in stainless steel through modifying their preferred nucleation sites (alumina and MgO·Al{sub 2}O{sub 3} inclusions) to calcium aluminates, which made no contribution to improving the steel cleanliness.
Synthesis, Structure, and Selective Gas Adsorption of a Single-Crystalline Zirconium Based Microporous Metal–Organic Framework
Porous metal-organic framework (MOF) materials with high thermal and water stability are desirable for various adsorption based applications. Early transition metal based MOFs such as those built on zirconium metal have been well recognized for their excellent stability toward heat and/or moisture. However, the difficulty growing large single crystals makes their structural characterization challenging. Herein we report a porous Zr-MOF, [Zr 6 O 4 (OH) 4 (cca) 6 ] (Zr-cca), which is assembled from zirconium and 4-carboxycinnamic acid (H 2 cca) under solvothermal conditions. Single crystal X-ray diffraction analysis reveals that the structure of Zr-cca is isoreticular to the prototype zirconium based MOF, UiO-66. Zr-cca shows permanent porosity upon removal of solvent molecules initially residing inside the pores, with a BET surface area of 1178 m 2 /g. As expected, it exhibits good thermal stability (stable up to 400 °C) and high resistance to acidity over a wide pH range. Evaluation of its gas adsorption performance on various hydrocarbons and fluorocarbons indicates that it preferentially adsorbs C 3 and C 4 hydrocarbons over C 2 analogues. At 30°C Zr-cca takes up more than 50 wt % of perfluorohexane and the adsorption-desorption process is fully recyclable. We have compared this material with UiO-66 and studied the underlying reasons for the difference in their adsorption performance toward perfluorohexane.
Metal–organic frameworks: functional luminescent and photonic materials for sensing applications
This review summarizes the diverse routes to derive sensing applications from suitably functionalized and crystal-engineered metal–organic framework (MOF) materials, either by fluorometric responses, or based on photonic crystal-based signal transduction.