Engineering Papers⌕ Search

Engineering topics

Li, Jing

Publications and source records attributed to Li, Jing.

At least 235 records · Page 13

Identification and expression pattern analysis of BoMYB51 involved in indolic glucosinolate biosynthesis from broccoli (Brassica oleracea var. italica)

Highlights: • Overexpression of BoMYB51 in Arabidopsis increases indolic glucosinolate production by upregulating biosynthetic genes. • Overexpression of BoMYB51 in Arabidopsis results in enhanced flagellin22 (Flg22) induced callose deposition. • BoMYB51 is upregulated by SA, JA, ABA and ET. GA represses BoMYB51 expression in true leaves, but not in cotyledons. • BoMYB51 is induced by both biotic and abiotic stresses. Glucosinolates are a class of amino acid-derived specialized metabolites characteristic of the Brassicales order. Trp derived indolic glucosinolates are essential for the effective plant defense responses to a wide range of pathogens and herbivores. In Arabidopsis, MYB51 is the key transcription factor positively regulates indolic glucosinolate production by activating certain biosynthetic genes. In this study, we report the isolation and identification of a MYB51 from broccoli designated as BoMYB51. Overexpression of BoMYB51 in Arabidopsis increased indolic glucosinolate production by upregulating biosynthetic genes and resulted in enhanced flagellin22 (Flg22) induced callose deposition. The spatial expression pattern and responsive expression of BoMYB51 to several hormones and stress treatments were investigated by expressing the β-glucuronidase (GUS) reporter gene driven by BoMYB51 promotor in Arabidopsis and quantitative real-time PCR analysis in broccoli. Our study provides information on molecular characteristics of BoMYB51 and possible physiological process BoMYB51 may involve.

60 APPLIED LIFE SCIENCES↗

Topologically guided tuning of Zr-MOF pore structures for highly selective separation of C6 alkane isomers

Effective separation of alkane isomers is a critical step in the petroleum refining process to produce gasoline with high octane rating. Current technology relies on energy intensive distillation method. Adsorptive separation using porous solids offers an alternative route that is more cost effective, lower energy and higher efficiency. Guided by topology-directed design and synthesis, we have developed a series of zirconium-based metal-organic frameworks with optimized pore structure for efficient separation of C6 alkane isomers, Zr-bptc adsorbs a large amount of n-hexane while excluding branched isomers. The n-hexane uptake is ~70% higher than that of a benchmark adsorbent, zeolite-5A. A derivative structure, Zr-abtc, is capable of discriminating all three C6 isomers with a high separation factor for 3-methylpentane over 2,3-dimethylbutane. This property is important for producing gasoline with further improved quality.

36 MATERIALS SCIENCE↗

Genomic variation in 3,010 diverse accessions of Asian cultivated rice

Here we analyse genetic variation, population structure and diversity among 3,010 diverse Asian cultivated rice (Oryza sativa L.) genomes from the 3,000 Rice Genomes Project. Our results are consistent with the five major groups previously recognized, but also suggest several unreported subpopulations that correlate with geographic location. We identified 29 million single nucleotide polymorphisms, 2.4 million small indels and over 90,000 structural variations that contribute to within- and between-population variation. Using pan-genome analyses, we identified more than 10,000 novel full-length protein-coding genes and a high number of presence–absence variations. The complex patterns of introgression observed in domestication genes are consistent with multiple independent rice domestication events. The public availability of data from the 3,000 Rice Genomes Project provides a resource for rice genomics research and breeding.

59 BASIC BIOLOGICAL SCIENCES↗

Nanoscale Lacing by Electrons

The ability to harness the optical or electrical properties of nanoscale particles depends on their assembly in terms of size and spatial characteristics which remains challenging due to lack of size focusing. Electrons provide a clean and focusing agent to initiate the assembly of nanoclusters or nanoparticles. Here an intriguing route is demonstrated to lace gold nanoclusters and nanoparticles in string assembly through electron-initiated nucleation and aggregative growth of Au(I)-thiolate motifs on a thin film substrate. This size-focused assembly is demonstrated by controlling the electron dose under transmission electron microscopic imaging conditions. The Au(I)-thiolate motifs, in combination with the molecularly mediated alignment, facilitate the interstring electrostatic and intrastring aurophilic interactions, which functions as a molecular template to aid electron-initiated 1D lacing. The findings demonstrate a hierarchical route for the 1D assemblies with size and spatial tunable catalytic, optical, sensing, and diagnostic properties.

Cheng, Han-Wen↗

An improved Armstrong–Frederick-Type Plasticity Model for Stable Cyclic Stress–Strain Responses Considering Nonproportional Hardening

This paper modified an Armstrong–Frederick-type plasticity model for investigating the stable cyclic deformation behavior of metallic materials with different sensitivity to nonproportional loadings. In the modified model, the nonproportionality factor and nonproportional cyclic hardening coefficient coupled with the Jiang–Sehitoglu incremental plasticity model were used to estimate the stable stress–strain responses of the two materials (1045HR steel and 304 stainless steel) under various tension–torsion strain paths. A new equation was proposed to calculate the nonproportionality factor on the basis of the minimum normal strain range. Procedures to determine the minimum normal strain range were presented for general multiaxial loadings. Then, the modified model requires only the cyclic strain hardening exponent and cyclic strength coefficient to determine the material constants. It is convenient for predicting the stable stress–strain responses of materials in engineering application. Comparisons showed that the modified model can reflect the effect of nonproportional cyclic hardening well.

36 MATERIALS SCIENCE↗

Impact of pH and urea content on size and luminescence of upconverting Y2O3:Yb, Er nanophosphors

Highlights: • The granula size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+}, Er{sup 3+} nanophosphors was tuned via altering the pH values and urea contents. • Steady state and transient spectroscopy along with FTIR analysis are performed to clarify the insight photophysical mechanism. • Nonradiative transition probability modulation due to the OH{sup −} group variation could be responsible for improved R/G intensity ratio. - Abstract: The pH value and urea concentration of precursor dramatically impact on the particle size, morphology and upconversion luminescence of Y{sub 2}O{sub 3}:Yb{sup 3+} , Er{sup 3+} nanophosphors. The lower pH leads to the smaller granula size of the final product, for instance, the crystalline size reduces from ∼30 nm to ∼16 nm as pH value varies from 9.3 to 6.7. The intensity of green (2H11/2, 4S3/2 → 4I15/2) and red emission (4F9/2 → 4I15/2) can be effectively and readily tuned by adjusting the pH value and urea content of precursor solution. The sample derived at pH of 6.7 and urea content of 384 mg/mL exhibits the highest red to green ratio, as a result of more surface defects and hydroxyl residues. Besides, the upconversion lifetime investigation further proved that the quenching and nonradiative relaxation from 2H11/2 and 4S3/2 to 4F9/2 caused by the surface defects could be responsible for the relative enhancement of the red emission.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Natural Product Micheliolide (MCL) Irreversibly Activates Pyruvate Kinase M2 and Suppresses Leukemia

Metabolic reprogramming of cancer cells is essential for tumorigenesis in which pyruvate kinase M2 (PKM2), the low activity isoform of pyruvate kinase, plays a critical role. Herein, we describe the identification of a nature-product-derived micheliolide (MCL) that selectively activates PKM2 through the covalent binding at residue cysteine424 (C424), which is not contained in PKM1. This interaction promotes more tetramer formation, inhibits the lysine433 (K433) acetylation, and influences the translocation of PKM2 into the nucleus. In addition, the pro-drug dimethylaminomicheliolide (DMAMCL) with similar properties as MCL significantly suppresses the growth of leukemia cells and tumorigenesis in a zebrafish xenograft model. Cell-based assay with knock down PKM2 expression verifies that the effects of MCL are dependent on PKM2 expression. DMAMCL is currently in clinical trials in Australia. Our discovery may provide a valuable pharmacological mechanism for clinical treatment and benefit the development of new anticancer agents.

60 APPLIED LIFE SCIENCES↗

Synthesis, Structural Characterization, and Growth Mechanism of Li 1+ x V 3 O 8 Submicron Fibers for Lithium-Ion Batteries

Here, we report on the synthesis of submicron Li 1+x V 3 O 8 fibers through a facile mixed ethanol/water solution-mediated solvothermal route in the absence of surfactants. All the raw materials used are commercially available, relatively inexpensive, and low-toxic, and these can be handled in an ambient atmosphere, rendering this synthetic route as reasonably facile and efficient. To ensure a desirable and acceptable sample crystallinity and purity, we introduced a postannealing treatment at 500°C. The monoclinic phase formation of the fiber sample was probed in detail using a series of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, infrared spectroscopy, X-ray photoelectron spectroscopy, high resolution transmission electron microscopy, and selected area electron diffraction measurements. Both morphology and chemical composition could be carefully and systematically tuned in terms of generating a class of novel, pure, and well-defined motifs of Li 1+x V 3 O 8 . A plausible mechanism for the formation of submicron-diameter fibers has been discussed in addition to the expected phase transformation within our Li-V-O materials. Our comprehensive study should provide for needed fundamental insights into putting forth a viable synthesis strategy for the generation of well-defined morphological variants of layered oxide materials for battery applications.

25 ENERGY STORAGE↗

Synthesis and Characterization of CuFe 2 O 4 Nano/Submicron Wire–Carbon Nanotube Composites as Binder-free Anodes for Li-Ion Batteries

Here, a series of one-dimensional CuFe 2 O 4 nano/sub-micron wires possessing different diameters, crystal phases, and crystal sizes have been successfully generated using a facile template-assisted co precipitation reaction at room temperature, followed by a short post-annealing process. The diameter and the crystal structure of the resulting CuFe 2 O4 (CFO) wires were judiciously tuned by varying the pore size of the template and the post-annealing temperature, respectively. Carbon nanotubes (CNTs) were incorporated to generate CFO-CNT binder-free anodes, and multiple characterization techniques were employed with the goal of delineating the relationships between electrochemical behavior and the properties of both the CFO wires (crystal phase, wire diameter, crystal size) and the electrode architecture (binder-free vs. conventionally prepared approaches). The study reveals several notable findings. First, the crystal phase (cubic or tetragonal) did not influence the electrochemical behavior in this CFO system. Second, regarding crystallite size and wire diameter, CFO wires with larger crystallite sizes exhibit improved cycling stability, while wires possessing smaller diameters exhibiting higher capacities. Finally, the electrochemical behavior is strongly influenced by the electrode architecture, with CFO-CNT binder-free electrodes demonstrating significantly higher capacities and cycling stability compared to conventionally prepared coatings. The mechanism(s) associated with the high capacities under low current density but limited electrochemical reversibility of CFO electrodes under high current density were probed via x-ray absorption spectroscopy (XAS) mapping with sub-micron spatial resolution for the first time. Results suggest that the capacity of the binder-free electrodes under high rate is limited by the irreversible formation of Cu 0 , as well as limited reduction of Fe 3+ , to Fe 2+ not Fe 0 . The results (1) shed fundamental insight into the reversibility of CuFe 2 O 4 materials cycled at high current density and (2) demonstrate that a synergistic effort to control both active material morphology and electrode architecture is an effective strategy for optimizing electrochemical behavior.

25 ENERGY STORAGE↗

Groundwater mixing and mineralization processes in a mountain–oasis–desert basin, northwest China: hydrogeochemistry and environmental tracer indicators

Hydrogeochemistry and environmental tracers ({sup 2}H, {sup 18}O, {sup 87}Sr/{sup 86}Sr) in precipitation, river and reservoir water, and groundwater have been used to determine groundwater recharge sources, and to identify mixing characteristics and mineralization processes in the Manas River Basin (MRB), which is a typical mountain–oasis–desert ecosystem in arid northwest China. The oasis component is artificial (irrigation). Groundwater with enriched stable isotope content originates from local precipitation and surface-water leakage in the piedmont alluvial–oasis plain. Groundwater with more depleted isotopes in the north oasis plain and desert is recharged by lateral flow from the adjacent mountains, for which recharge is associated with high altitude and/or paleo-water infiltrating during a period of much colder climate. Little evaporation and isotope exchange between groundwater and rock and soil minerals occurred in the mountain, piedmont and oasis plain. Groundwater δ{sup 2}H and δ{sup 18}O values show more homogeneous values along the groundwater flow direction and with well depths, indicating inter-aquifer mixing processes. A regional contrast of groundwater allows the {sup 87}Sr/{sup 86}Sr ratios and δ{sup 18}O values to be useful in a combination with Cl, Na, Mg, Ca and Sr concentrations to distinguish the groundwater mixing characteristics. Two main processes are identified: groundwater lateral-flow mixing and river leakage in the piedmont alluvial–oasis plain, and vertical mixing in the north oasis plain and the desert. The {sup 87}Sr/{sup 86}Sr ratios and selected ion ratios reveal that carbonate dissolution and mixing with silicate from the southern mountain area are primarily controlling the strontium isotope hydrogeochemistry.

58 GEOSCIENCES↗

Atomic Cluster Aggregates in Nucleation of Solid Alumina Inclusion in the Aluminum Deoxidation for Liquid Iron

Nucleation plays a decisive role in determining the structure and size distribution of a solid inclusion particle in liquid iron. The literature does not yet provide a clear picture about the pathway leading to solid alumina inclusion from liquid iron. The main confusion surrounds the little-known structures and thermodynamic properties of metastable alumina phase (MAP) that appear in the nucleation of alumina inclusion. In this work, it is suggested that MAP could appear in the Al-deoxidation reaction, based on the summaries and analysis in terms of various equilibrium experimental results and thermodynamic modeling of the Al deoxidation in liquid iron since the 1950s. The structures and thermodynamic properties of a species of MAP, alumina atomic cluster aggregates (AACAs), are calculated by density functional theory (DFT) methods. The thermodynamics on formation and transformation of AACAs shows that AACAs are in equilibrium with Al and O with various contents measured in the Al-deoxidation equilibrium experiments for liquid iron. It is suggested that the residual Al and O, which cannot nucleate, appear in the form of AACAs in Al-deoxidized liquid iron. It can be concluded that AACAs are the metastable intermediates and structural units for alumina inclusion nucleating from liquid iron. Thus, the behaviors of AACAs are important to the control of the nucleation rate of alumina inclusions in the Al deoxidation for liquid iron.

36 MATERIALS SCIENCE↗

Controlling Chemical Reactions in Confined Environments: Water Dissociation in MOF-74

The confined porous environment of metal organic frameworks (MOFs) is an attractive system for studying reaction mechanisms. Compared to flat oxide surfaces, MOFs have the key advantage that they exhibit a well-defined structure and present significantly fewer challenges in experimental characterization. As an example of an important reaction, we study here the dissociation of water—which plays a critical role in biology, chemistry, and materials science—in MOFs and show how the knowledge of the structure in this confined environment allows for an unprecedented level of understanding and control. In particular, combining in-situ infrared spectroscopy and first-principles calculations, we show that the water dissociation reaction can be selectively controlled inside Zn-MOF-74 by alcohol, through both chemical and physical interactions. Methanol is observed to speed up water dissociation by 25% to 100%, depending on the alcohol partial pressure. On the other hand, co-adsorption of isopropanol reduces the speed of the water reaction, due mostly to steric interactions. In addition, we also investigate the stability of the product state after the water dissociation has occurred and find that the presence of additional water significantly stabilizes the dissociated state. With this being said, our results show that precise control of reactions within nano-porous materials is possible, opening the way for advances in fields ranging from catalysis to electrochemistry and sensors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and Electrochemical Characteristics of Ca-Doped “Flower-like” Li 4 Ti 5 O 12 Motifs as High-Rate Anode Materials for Lithium-Ion Batteries

Doped motifs offer an intriguing structural pathway toward improving conductivity for battery applications. Specifically, Ca-doped, three-dimensional “flower-like” Li 4–x Ca x Ti 5 O 12 (“x” = 0, 0.1, 0.15, and 0.2) micrometer-scale spheres have been successfully prepared for the first time using a simple and reproducible hydrothermal reaction followed by a short calcination process. The products were experimentally characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) mapping, inductively coupled plasma optical emission spectrometry (ICP-OES), X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and galvanostatic charge–discharge testing. Calcium dopant ions were shown to be uniformly distributed within the LTO structure without altering the underlying “flower-like” morphology. The largest lattice expansion and the highest Ti 3+ ratios were noted with XRD and XPS, respectively, whereas increased charge transfer conductivity and decreased Li + -ion diffusion coefficients were displayed in EIS for the Li 4–x Ca x Ti 5 O 12 (“x” = 0.2) sample. The “x” = 0.2 sample yielded a higher rate capability, an excellent reversibility, and a superior cycling stability, delivering 151 and 143 mAh/g under discharge rates of 20C and 40C at cycles 60 and 70, respectively. In addition, a high cycling stability was demonstrated with a capacity retention of 92% after 300 cycles at a very high discharge rate of 20C. In addition, first-principles calculations based on density functional theory (DFT) were conducted with the goal of further elucidating and understanding the nature of the doping mechanism in this study. The DFT calculations not only determined the structure of the Ca-doped Li 4 Ti 5 O 12 , which was found to be in accordance with the experimentally measured XPD pattern, but also yielded valuable insights into the doping-induced effect on both the atomic and electronic structures of Li 4 Ti 5 O 12 .

25 ENERGY STORAGE↗

A vinyl flanked difluorobenzothiadiazole–dithiophene conjugated polymer for high performance organic field-effect transistors

Fluorine containing conjugated polymers have been widely applied in high performance organic solar cells, but their use in field-effect transistors is still quite limited. In this work, a conjugated polymer PTFBTV based on difluorobenzothiadiazole (DFBT) and dithiophene was synthesized, utilizing multiple vinylene as linkers. The polymer exhibits a relatively high hole mobility up to 2.0 cm 2 V -1 s -1 compared with the reported DFBT–oligothiophene based polymers, yet its structural complexity is much simpler. The polymer thin film exhibits a typical ‘face on’ molecular orientation. A single crystal of its monomer revealed a non-covalent intramolecular contact between fluorine and the neighbouring proton, which strengthens the backbone co-planarity. Meanwhile an intermolecular F∙∙∙F contact was also observed, which might cause rather scattered lamellar crystallinity for PTFBTV in the solid state.

36 MATERIALS SCIENCE↗

Islet β cell: An endocrine cell secreting miRNAs

Highlights: • Islets can secret not only insulin but also miRNAs. • Islets secret miRNAs actively and selectively and may have function on target tissues. • Most of the secret miRNAs by islets were packaged by exosomes. The pancreas is an important endocrine organ. Pancreatic beta (β) cells secrete insulin to regulate the metabolism of glucose and maintain the stability of blood glucose. MicroRNAs (miRNAs), small (20-25 nt) non-coding RNA molecules, function in target gene silencing through post-transcriptional patterns, and multiple miRNAs regulate insulin secretion, insulin signaling pathways in pancreatic β cells and islet activity. In recent years, it has been found that many types of cells can secrete regulatory miRNA, but whether islet cells can secrete miRNA has not been clarified yet. In this study, we detected miRNA expressions in cell culture medium of primary mouse islet cells and islet cell line MIN6. And we found that islet cells can selectively and actively secrete miRNAs, mainly through the way of exosome package, and that miRNA secretion profiling patterns vary according to different insulin secretion stimulating conditions (high Glucose, high Kcl, high Arginine and high Free fat acid (FFA)). Additionally, we found that these miRNAs secreted by islet cells can be transported and have gene-regulating functions on recipient tissue cells, such as liver and muscles. In conclusion, we find another secretory function of the islet β cells: not only insulin, but also miRNAs.

60 APPLIED LIFE SCIENCES↗