Engineering Papers⌕ Search

Engineering topics

Li, Jing

Publications and source records attributed to Li, Jing.

At least 217 records · Page 12

Development of an MKIDs-Based THz Superconducting Imaging Array (TeSIA) at 0.85 THz

Dome A, the highest point of the cold and dry Antarctic ice sheet, offers the best access to atmospheric windows at THz/FIR wavelengths on Earth. China is planning to build a 5-m THz telescope (DATE5) there. To achieve its scientific goals associated with large sky surveys, we are developing a THz superconducting imaging array (TeSIA) at 0.85 THz (350-μm window) with a pixel number of 32 × 32 and targeting background-limited sensitivity. In this paper, detailed system design and performance of the TeSIA based on aluminum MKIDs are presented.

42 ENGINEERING↗

Electron Dose-Controlled Formation, Growth, and Assembly of Nanoclusters and Nanoparticles from Aurophilic Au(I)–Thiolate Ensemble on Surfaces

The ability to precisely control electron irradiationinduced formation, growth, and assembly of nanoclusters or nanoparticles on a solid surface is important for design and creation of catalytically or chemically active surface sites and interfaces free from chemical reducing agents. Here, we show the results of an investigation of the electron dose-controlled formation, growth, and assembly of nanoclusters and nanoparticles in a molecularly assembled thin film of Au(I)–thiolate motifs on a substrate, highlighting an in situ monitoring of the evolution of morphology under controlled electron dose. With aurophilic motifs of Au(I)–thiolate being confined by electrostatic interactions, the sizes of Au nanoclusters and nanoparticles were shown to increase with electron dose, revealing a propensity of a string alignment of the grown nanoclusters and nanoparticles. This growth preference to onedimensional assembly is supported by the analysis of the surface reaction kinetics in terms of the surface density of electron dose for the growth of the nanoclusters and nanoparticles. Here, the electron dose-controlled size-focusing and directional assembly of nanoclusters and nanoparticles may be exploited as new strategy for the precise control of nanoclusters or nanoparticles and their assemblies on solid surfaces not only free from chemical reducing agent but also with the ability of visual monitoring of the morphological evolution during growth.

36 MATERIALS SCIENCE↗

Tailor-Made Microporous Metal–Organic Frameworks for the Full Separation of Propane from Propylene Through Selective Size Exclusion

Adsorptive separation of olefin/paraffin mixtures by porous solids can greatly reduce the energy consumption associated with the currently employed cryogenic distillation technique. Here, the complete separation of propane and propylene by a designer microporous metal–organic framework material is reported. The compound, Y 6 (OH) 8 (abtc) 3 (H 2 O) 6 (DMA) 2 (Y-abtc, abtc = 3,3',5,5'-azobenzene-tetracarboxylates; DMA = dimethylammonium), is rationally designed through topology-guided replacement of inorganic building units. Y-abtc is both thermally and hydrothermally robust, and possesses optimal pore window size for propane/propylene separation. It adsorbs propylene with fast kinetics under ambient temperature and pressure, but fully excludes propane, as a result of selective size exclusion. Multicomponent column breakthrough experiments confirm that polymer-grade propylene (99.5%) can be obtained by this process, demonstrating its true potential as an alternative sorbent for efficient separation of propane/propylene mixtures.

36 MATERIALS SCIENCE↗

Automatic Organ Segmentation for CT Scans Based on Super-Pixel and Convolutional Neural Networks

Accurate segmentation of specific organ from computed tomography (CT) scans is a basic and crucial task for accurate diagnosis and treatment. To avoid time-consuming manual optimization and to help physicians distinguish diseases, an automatic organ segmentation framework is presented. The framework utilized convolution neural networks (CNN) to classify pixels. To reduce the redundant inputs, the simple linear iterative clustering (SLIC) of super-pixels and the support vector machine (SVM) classifier are introduced. To establish the perfect boundary of organs in one-pixel-level, the pixels need to be classified step-by-step. First, the SLIC is used to cut an image into grids and extract respective digital signatures. Next, the signature is classified by the SVM, and the rough edges are acquired. Finally, a precise boundary is obtained by the CNN, which is based on patches around each pixel-point. The framework is applied to abdominal CT scans of livers and high-resolution computed tomography (HRCT) scans of lungs. The experimental CT scans are derived from two public datasets (Sliver 07 and a Chinese local dataset). Experimental results show that the proposed method can precisely and efficiently detect the organs. This method consumes 38 s/slice for liver segmentation. The Dice coefficient of the liver segmentation results reaches to 97.43%. For lung segmentation, the Dice coefficient is 97.93%. This finding demonstrates that the proposed framework is a favorable method for lung segmentation of HRCT scans.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Zeolite-Encapsulated Pt Nanoparticles for Tandem Catalysis

Encapsulation of metal nanoparticles in a zeolite matrix is a promising route to integrate multiple sequential reactions into a one-pot and one-step tandem catalytic reaction. We report a cationic polymer-assisted synthetic strategy to encapsulate Pt nanoparticles (NPs) into MFI zeolites. Degrees of encapsulation of Pt NPs in the synthesized catalysts exceeding 90% were demonstrated via kinetic studies of model reactions involving substrates with different molecular dimensions. HZSM-5 zeolite-encapsulated Pt NPs are able to selectively mediate the tandem Aldol condensation and hydrogenation of furfural and acetone to form hydrogenated C8 products with a combined yield of 87%. In contrast, hydrogenation and decarbonylation of furfural dominate on Pt NPs supported on HZSM-5 at otherwise identical conditions. The high selectivity towards the tandem reaction on the encapsulated catalyst is attributed to the distribution of metal and acid sites, which limits the access of furfural to Pt sites and promotes the acid-catalyzed Aldol condensation. This is the first demonstration that the product distribution in a tandem reaction is manipulated by tailoring the architecture of catalytic materials via encapsulation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Long noncoding RNA LINC00339 aggravates doxorubicin-induced cardiomyocyte apoptosis by targeting MiR-484

Highlights: • LncRNA LINC00339 was highly expressed in DOX stimulated primary rat cardiomyocytes and H9c2 cells. • Knockdown of LINC00339 significantly reduced primary rat cardiomyocytes and H9c2 cells proliferation and apoptosis. • LINC00339 acts as a critical pro-apoptosis lncRNA that aggravates DOX-induced cardiac remodeling by miR-484. Abnormally expressed long noncoding RNAs (lncRNAs) has been recognized as one of the key source in cardiac diseases. However, the role of lncRNA in doxorubicin (DOX)-induced cardiotoxicity remains largely unknown. In previous studies, we have screened some aberrantly expressed lncRNAs from an animal model for DOX-induced cardiotoxicity, and LINC00339 is one of the highly expressed lncRNA. In this study, we validated and further explored its regulatory mechanisms using in vitro model systems. Primary cultured myocardial cell (PC) and H9C2 cell line were treated with different concentrations of DOX and the expression of LINC00339 were markedly up-regulated. However, knockdown of endogenous LINC00339 by its siRNA improved cells proliferation activity and reduced cardiomyocyte apoptosis. Further experiments showed the opposite trend of expression between LINC00339 and miR-484. Bioinformatics analysis and luciferase reporter assay indicated that LINC00339 directly binds to miR-484. Moreover, miR-484 inhibitor abrogated the collagen synthesis inhibition induced by LINC00339. These findings reveal a novel function of the LINC00339/miR-484 axis in DOX-induced cardiotoxicity.

60 APPLIED LIFE SCIENCES↗

Probing enhanced lithium-ion transport kinetics in 2D holey nanoarchitectured electrodes

Nanostructuring has been proved effective towards improving many energy storage and conversion devices, and is feasible for a wide range of materials. In particular, secondary nanoarchitectured materials exhibit collective advantages compared with nano-sized primary building blocks. Despite the manifold efforts in designed nanoarchitectures and synthetic routes, the underlying ion diffusion kinetics and phase transformation behaviours within nanoarchitectures still remain less explored. Herein, we probed enhanced lithium-ion transport behaviours using 2D holey zinc ferrite (ZFO) nanosheets as a model material, to demonstrate how self-assembled 2D holey nanoarchitectured electrodes can feature efficient ion diffusion channels, robust yet continuous electron transfer framework, and enlarged surface area, contributing to the superior performance over the ZFO nanoparticles without secondary structures. By revealing kinetic parameters through combined spectroscopic measurements and electrochemical techniques, our study manifests increased lithium-ion diffusion coefficients, higher capacitive charge storage contribution and reduced charge transfer impedance in holey nanosheets compared to randomly aggregated nanoparticles. Furthermore, our results promote deeper understanding of significantly enhanced electrochemical energy storage properties of these 2D holey nanoarchitectured electrodes resulted from more uniform and complete phase transformation and better active material utilization.

25 ENERGY STORAGE↗

Structure–Property Relations in Multiferroic [(CH 3 ) 2 NH 2 ]M(HCOO) 3 (M = Mn, Co, Ni)

In this paper, we bring together magnetization, infrared spectroscopy, and lattice dynamics calculations to uncover the magnetic field-temperature (B-T) phase diagrams and vibrational properties of the [(CH 3 ) 2 NH 2 ]M(HCOO) 3 (M = Mn 2+ , Co 2+ , Ni 2+ ) family of multiferroics. While the magnetically driven transition to the fully saturated state in [(CH 3 ) 2 NH 2 ]Mn(HCOO) 3 takes place at 15.3 T, substitution with Ni or Co drives the critical fields up toward 100 T, an unexpectedly high energy scale for these compounds. Analysis of the infrared spectrum of the Mn and Ni compounds across T C reveals doublet splitting of the formate bending mode which functions as an order parameter of the ferroelectric transition. By contrast, [(CH 3 ) 2 NH 2 ]Co(HCOO) 3 reveals a surprising framework rigidity across the order-disorder transition due to modest distortions around the Co 2+ centers. The transition to the ferroelectric state is thus driven by the dimethylammonium cation freezing and the resulting hydrogen bonding. Under applied field, the Mn (and most likely, the Ni) compounds engage the formate bending mode to facilitate the transition to their fully saturated magnetic states, whereas the Co complex adopts a different mechanism involving formate stretching distortions to lower the overall magnetic energy. Finally, similar structure–property relations involving substitution of transition-metal centers and control of the flexible molecular architecture are likely to exist in other molecule-based multiferroics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Reoxidation of Liquid Steel and Slag Composition on the Chemistry Evolution of Inclusions During Electroslag Remelting

Electroslag remelting (ESR) is increasingly used to produce some varieties of special steels and alloys, mainly because of its ability to provide extreme cleanliness and an excellent solidification structure simultaneously. In the present study, the combined effects of varying SiO{sub 2} contents in slag and reoxidation of liquid steel on the chemistry evolution of inclusions and the alloying element content in steel during ESR were investigated. The inclusions in the steel before ESR refining were found to be oxysulfides of patch-type (Ca,Mn)S adhering to a CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusion. The oxide inclusions in both the liquid metal pool and remelted ingots are CaO-Al{sub 2}O{sub 3}-MgO and MgAl{sub 2}O{sub 4} together with CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusions (slightly less than 30 pct of the total inclusions), which were confirmed to originate from the reduction of SiO{sub 2} from the original oxide inclusions by dissolved Al in liquid steel during ESR. CaO-Al{sub 2}O{sub 3}-MgO and MgAl{sub 2}O{sub 4} are newly formed inclusions resulting from the reactions taking place inside liquid steel in the liquid metal pool caused by reoxidation of liquid steel during ESR. Increasing the SiO{sub 2} content in slag not only considerably reduced aluminum pickup in parallel with silicon loss during ESR, but also suppressed the decrease in SiO{sub 2} content in oxide inclusions. (Ca,Mn)S inclusions were fully removed before liquid metal droplets collected in the liquid metal pool.

36 MATERIALS SCIENCE↗

Achieving High Cycling Rates via In Situ Generation of Active Nanocomposite Metal Anodes

The morphological control of electrochemically deposited metallic anodes, such as Li, Zn, and Mg, under high applied rates is essential for the development of high-energy-density batteries. For transportation applications, maximizing high rates and high energy density is key to attaining viable customer acceleration and range expectations, respectively. In this work, the in situ generation of Mg nanocrystals allowed cycling under high rates (10 mA cm –2 ) and reduced temperature (0 °C) for the very first time. Through operando STEM analysis, we discovered a highly functional SEI, a first of its kind, which enabled continuous deposition and dissolution of Mg without internal shorting. As a result, the unique morphology of the deposited Mg and the functional capability of the SEI are key to future development of practical metallic Mg anodes.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Rapid constriction of the selectivity filter underlies C-type inactivation in the KcsA potassium channel

C-type inactivation is a time-dependent process observed in many K+ channels whereby prolonged activation by an external stimulus leads to a reduction in ionic conduction. While C-type inactivation is thought to be a result of a constriction of the selectivity filter, the local dynamics of the process remain elusive. Here, we use molecular dynamics (MD) simulations of the KcsA channel to elucidate the nature of kinetically delayed activation/inactivation gating coupling. Microsecond-scale MD simulations based on the truncated form of the KcsA channel (C-terminal domain deleted) provide a first glimpse of the onset of C-type inactivation. We observe over multiple trajectories that the selectivity filter consistently undergoes a spontaneous and rapid (within 1–2 µs) transition to a constricted conformation when the intracellular activation gate is fully open, but remains in the conductive conformation when the activation gate is closed or partially open. Multidimensional umbrella sampling potential of mean force calculations and nonequilibrium voltage-driven simulations further confirm these observations. Electrophysiological measurements show that the truncated form of the KcsA channel inactivates faster and greater than full-length KcsA, which is consistent with truncated KcsA opening to a greater degree because of the absence of the C-terminal domain restraint. Together, these results imply that the observed kinetics underlying activation/inactivation gating reflect a rapid conductive-to-constricted transition of the selectivity filter that is allosterically controlled by the slow opening of the intracellular gate.

Li, Jing↗

The mechanism and function of circular RNAs in human diseases

Circular RNAs (circRNAs) are a recently discovered form of RNA. Initially, circRNAs were believed to result from errors during the process of gene transcription. However, after further investigation, scientists suggested that circRNAs are of great biological significance. CircRNAs show stability, conservation, abundance, and tissue and stage specificity. They can also function as miRNA sponges, regulate gene expression, and interact with proteins to affect cell behavior. Emerging evidence has also demonstrated that circRNAs participate or show abnormal expression in diseases, including central nervous system diseases, cardiovascular diseases and cancers, indicating their marked potential in the prediction and prognosis of diseases and clinical treatment.

60 APPLIED LIFE SCIENCES↗

A robust two-dimensional zirconium-based luminescent coordination polymer built on a V-shaped dicarboxylate ligand for vapor phase sensing of volatile organic compounds

Here we report herein a new two-dimensional zirconium-based luminescent coordination polymer Zr 6 (sdba) 4 (μ 3 -O) 4 (μ 3 - OH) 4 (HCOO) 2 (OH) 2 (H 2 O) 2 (1) [sdba = 4,4'-sulfonyldibenzoate] exhibiting selective fluorescence responses towards a variety of volatile organic compounds upon exposure in the vapor phase. Having a unique two-dimensional signal response towards aromatic molecules, including but not limited to nitroaromatic explosives, it is capable of identification of a diverse set of analytes. In addition, compound 1 shows a remarkably high sensitivity toward acetone vapors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Precipitation Behaviors of TiN Inclusion in GCr15 Bearing Steel Billet

There are many types of non-metallic TiN-based inclusions observed in GCr15 bearing steel, including single-particle TiN, multi-particle polymerized TiN, and complex inclusions like TiN-MnS, TiN-MgO-MgAl{sub 2}O{sub 4} (TiN-MgO-MA), and TiN-MgAl{sub 2}O{sub 4}-MnS (TiN-MA-MnS). Thermodynamic calculations suggest that single-particle TiN precipitates dominate the mushy zone of GCr15 bearing steel. Kinetic calculations regarding TiN growth suggest that the final size of the single-particle TiN ranges between 1 and 6 μm in the initial concentration range of [pct Ti] = 0.0060 to 0.0079 and [pct N] = 0.0049 to 0.0070, at 1620 to 1640 K and a local cooling rate of 0.5 to 10 K/s. The multi-particle polymerized TiN are formed by single TiN particles in three stages: single-particle TiN inclusions approach each other drawn by the cavity bridge force (CBF), local active angles consolidate, and neck region sintering occurs. Based on the thermodynamic calculations of TiN, MnS, and MgO precipitation, the formation behaviors of complex inclusions of TiN-MnS, TiN-MgO-MA, and TiN-MA-MnS were investigated.

36 MATERIALS SCIENCE↗

STAT3 activation by IL-6 from adipose-derived stem cells promotes endometrial carcinoma proliferation and metastasis

Endometrial cancer is the most common gynaecological cancer, and its incidence is increasing. Obesity is a well-recognized risk factor for endometrial cancer, and the mechanisms by which adipose tissue influences tumour development remain controversial. In this study, we examined the high IL-6 level in the ADSCs supernatant following treatment of endometrial cancer cell CM. Then, the activation of STAT3, a major tumourigenic IL-6 effector, was examined in ADSCs CM treated endometrial cancer cells. Conditioned ADSC medium was used to stimulate endometrial cancer cell growth in vitro. Similar to IL-6, ADSC-conditioned medium significantly promoted endometrial cancer growth and invasion. Furthermore, siRNA-mediated STAT3 inhibition in endometrial cancer cells decreased the ADSC-mediated promotion of cell proliferation and invasion. In addition, a subcutaneous nude mouse model of endometrial cancer was established to monitor the tumour-promoting effect of ADSCs. ADSC-conditioned medium promoted tumour growth, and STAT3 inhibition attenuated this effect. Based on these data, ADSCs promote endometrial cancer progression by the STAT3 signalling pathway.

60 APPLIED LIFE SCIENCES↗