Engineering Papers⌕ Search

Engineering topics

Li, Jing

Publications and source records attributed to Li, Jing.

At least 199 records · Page 11

Highly efficient and very robust blue-excitable yellow phosphors built on multiple-stranded one-dimensional inorganic–organic hybrid chains

Inorganic–organic hybrid semiconductors are promising candidates for energy-related applications. Here, we have developed a unique class of multiple-stranded one-dimensional (1D) structures as very robust and efficient lighting phosphors. Following a systematic ligand design strategy, these structures are constructed by forming multiple coordination bonds between adjacent copper iodide inorganic building units Cu m I m (m = 2, 4, 6) (e.g. dimer, tetramer and hexamer clusters) and strong-binding bidentate organic ligands with low LUMO energies which give rise to infinite 1D chains of high stability and low bandgaps. The significantly enhanced thermal/photostability of these multiple-stranded chain structures is largely attributed to the multi-dentate nature and enhanced Cu–N bonding, and their excellent blue excitability is a result of using benzotriazole based ligands with low-lying LUMO energies. These facts are confirmed by Density Functional Theory (DFT) calculations. The luminescence mechanism of these compounds is studied by temperature dependent photoluminescence experiments. High internal quantum yields (IQYs) are achieved under blue excitation, marking the highest value reported so far for crystalline inorganic–organic hybrid yellow phosphors. Excellent thermal- and photo-stability, coupled with high luminescence efficiency, make this class of materials promising candidates for use as rare-earth element (REE) free phosphors in energy efficient general lighting devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

n -Butanol and ethanol production from cellulose by Clostridium cellulovorans overexpressing heterologous aldehyde/alcohol dehydrogenases

With high cellulolytic and acetic/butyric acids production abilities, Clostridium cellulovorans is promising for use to produce cellulosic n -butanol. Here, we introduced three different aldehyde/alcohol dehydrogenases encoded by bdh B, adh E1, and adh E2 from Clostridium acetobutylicum into C. cellulovorans and studied their effects on ethanol and n-butanol production. Compared to AdhE2, AdhE1 was more specific for n -butanol biosynthesis over ethanol. Co-expressing adh E1 with bdh B produced a comparable amount of butanol but significantly less ethanol, leading to a high butanol/ethanol ratio of 7.0 and 5.6 (g/g) in glucose and cellulose fermentation, respectively. Co-expressing adh E1 or adh E2 with bdh B did not increase butanol production because the activity of BdhB was limited by the NADPH availability in C. cellulovorans . Altogether, the strain overexpressing adhE2 alone produced the most n -butanol (4.0 g/L, yield: 0.22 ± 0.01 g/g). Based on the insights from this study, further metabolic engineering of C. cellulovorans for cellulosic n -butanol production is suggested.

09 BIOMASS FUELS↗

Effects of surface recombination on the charge collection in h-BN neutron detectors

Hexagonal boron nitride (h-BN) epilayers have been recognized as a promising material for applications in solid-state neutron detectors. However, the highest detection efficiency of 58% attained so far for 1 mm 2 detectors fabricated from 50 μm thick B-10 enriched h-BN films still falls short of the expected theoretical value of 64%. This is due to the less than perfect charge collection efficiency. In this work, we have fabricated and analyzed photocurrent-voltage characteristics of 11 h-BN neutron detectors. The dependence of the charge collection efficiency ( n c ) on the charge carrier mobility-lifetime (µτ) product of the bulk trapping parameter reveals that the charge collection efficiency n c is nearly perfect at a bias voltage of 200 V if we neglect the effects of surface recombination. Our results have clearly demonstrated that the surface recombination of charge carriers is the dominant factor which prevents a further enhancement in the charge collection efficiency in our current detectors. The surface recombination field E S (= s/µ), defined as the ratio of the surface recombination velocity (s) to the carrier mobility (µ), of holes was found to have a linear relationship with that of electrons and has a magnitude on the order of 10 4 V/cm. Here the present study indicates that it is critical to reduce surface recombination E S in h-BN in order to further push the charge collection and hence the total detection efficiency of h-BN neutron detectors to 100%.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Modeling of Mixed-Pixel Clumping Index From Remote Sensing Data and Its Evaluation

The clumping index (CI) is a canopy structure parameter that describes the dispersion or grouping of leaves. Previously, it has been estimated based on the normalized difference between hotspot and darkspot (NDHD), which is derived from multi-angle remote sensing data. However, currently it is impossible to derive CI from NDHD for a large area at a spatial resolution finer than 275 m since such fine multi-angle data are unavailable. In this study, an algorithm of the mixed-pixel clumping index (MPCI) was implemented, and an MPCI map of China's landmass at 1 km resolution was derived from the HJ-1A/1B data at 30 m resolution. The MPCI map was compared with the previous NDHD CI derived from the moderate resolution imaging spectroradiometer (MODIS). The correlation of these two datasets was greater than 0.9, and the mean bias was approximately 0.1. Indirectly, the MPCI map was applied to an effective leaf area index (LAI) product to derive true LAI. Using the MODIS LAI product as a reference, we found that the coefficient of determination was improved from 0.72 to 0.80, and the root mean squared error was reduced from 0.53 to 0.35 m 2 /m 2 after the effective LAI is corrected by this MPCI map, suggesting that this MPCI map is comparable to the NDHD CI. Although our algorithm is currently tested at 1 km resolution, potentially, it can be applied to higher spatial resolution than 275 m for mapping LAI and carbon cycle modeling before these multi-angle data at higher resolution are available.

47 OTHER INSTRUMENTATION↗

Robust Cubature Kalman Filter for Dynamic State Estimation of Synchronous Machines Under Unknown Measurement Noise Statistics

The Kalman-type filtering techniques including cubature Kalman filter (CKF) does not work well in non-Gaussian environments, especially in the presence of outliers. To solve this problem, Huber's M-estimation-based robust CKF (RCKF) is proposed for synchronous machines by combining the Huber's M-estimation theory with the classical CKF, which is capable of coping with the deterioration in performance and discretization of tracking curves when measurement noise statistics deviate from the prior noise statistics. The proposed RCKF algorithm has good adaptability to unknown measurement noise statistics characteristics including non-Gaussian measurement noise and outliers. The simulation results on the WSCC 3-machine 9-bus system and New England 16-machine 68-bus system verify the effectiveness of the proposed method and its advantage over the classical CKF.

42 ENGINEERING↗

Rice black‐streaked dwarf virus P10 acts as either a synergistic or antagonistic determinant during superinfection with related or unrelated virus

Summary Rice black‐streaked dwarf virus (RBSDV), a member of the genus Fijivirus , is a devastating pathogen of crop plants. RBSDV S10 encodes a capsid protein (P10) that is an important component of the double‐layered particle. However, little information is available on the roles of RBSDV P10 in viral infection or in interactions with other viruses. Here, we demonstrate that the expression of P10 in plants alleviates the symptoms of both RBSDV and the closely related Southern rice black‐streaked dwarf virus (SRBSDV), and reduces the disease incidence, but renders the plants more susceptible to the unrelated Rice stripe virus (RSV). Further experiments suggest that P10‐mediated resistance to RBSDV and SRBSDV operates at the protein level, rather than the RNA level, and is not a result of post‐transcriptional gene silencing. Transcriptomic data reveal that the expression of P10 in plants significantly suppresses the expression of rice defence‐related genes, which may play important roles in resistance to RSV infection. After infection with RBSDV, plants are more resistant to subsequent challenge by SRBSDV, but more susceptible to RSV. Overall, these results indicate that P10 acts as an important effector in virus interactions.

Zhang, Hehong↗

Distant Comet C/2017 K2 and the Cohesion Bottleneck

The distant long-period comet C/2017 K2 (PANSTARRS) has been outside the planetary region of the solar system for ∼3 Myr, negating the possibility that heat retained from the previous perihelion could be responsible for its activity. This inbound comet is also too cold for water ice to sublimate and too cold for amorphous water ice, if present, to crystallize. C/2017 K2 thus presents an ideal target in which to investigate the mechanisms responsible for activity in distant comets. We have used the Hubble Space Telescope to study the comet in the pre-perihelion heliocentric distance range 13.8 ≤ r {sub H} ≤ 15.9 au. In this range, the coma maintains a logarithmic surface brightness gradient m = −1.010 ± 0.004, consistent with mass loss proceeding in steady state. The absence of a radiation pressure swept tail indicates that the effective particle size is large (radius ≳0.1 mm) and the mass-loss rate is ∼200 kg s{sup −1}, remarkable for a comet still beyond the orbit of Saturn. Extrapolation of the photometry indicates that activity began in 2012.1 ± 0.5, at r {sub H} = 25.9 ± 0.9 au, where the isothermal blackbody temperature is only T {sub BB} = 55 K. This large distance and low temperature suggest that cometary activity is driven by the sublimation of a super-volatile ice (e.g., CO), presumably preserved by K2's long-term residence in the Oort cloud. The mass-loss rate can be sustained by CO sublimation from an area ≲2 km{sup 2}, if located near the hot subsolar point on the nucleus. However, while the drag force from sublimated CO is sufficient to lift millimeter-sized particles against the gravity of the cometary nucleus, it is 10{sup 2}–10{sup 3} times too small to eject these particles against interparticle cohesion. Our observations thus require either a new understanding of the physics of interparticle cohesion or the introduction of another mechanism to drive distant cometary mass loss. We suggest thermal fracture and electrostatic supercharging in this context.

79 ASTRONOMY AND ASTROPHYSICS↗

Active Asteroid P/2017 S5 (ATLAS)

Observations of active asteroid P/2017 S5 when near perihelion reveal the ejection of large (10{sup 2}–10{sup 4} μm) particles at 0.2–2 m s{sup −1} speeds, with estimated mass-loss rates of a few kg s{sup −1}. The protracted nature of the mass loss (continuous over ∼150 days) is compatible with a sublimation origin, meaning that this object is likely an ice-bearing main-belt comet. Equilibrium sublimation of exposed water ice covering as little as 0.1 km{sup 2} can match the data. Observations a year after perihelion show the object in an inactive state from which we deduce a nucleus effective radius 450{sub −60}{sup +100} m (albedo 0.06 ± 0.02 assumed). The gravitational escape speed from a body of this size is just ∼0.3 m s{sup −1}, comparable to the inferred ejection speed of the dust. Time-series photometry provides tentative evidence for rapid rotation (lightcurve period 1.4 hr) that may also play a role in the loss of mass and which, if real, is a likely consequence of spin-up by sublimation torques. P/2017 S5 shares both physical and orbital similarities with the split active asteroid pair P/2016 J1-A and J1-B, and all three objects are likely members of the ∼7 Myr old, collisionally produced, Theobalda family.

79 ASTRONOMY AND ASTROPHYSICS↗

Size-dependent kinetics during non-equilibrium lithiation of nano-sized zinc ferrite

Spinel transition metal oxides (TMOs) have emerged as promising anode materials for lithium-ion batteries. It has been shown that reducing their particle size to nanoscale dimensions benefits overall electrochemical performance. Here, we use in situ transmission electron microscopy to probe the lithiation behavior of spinel ZnFe 2 O 4 as a function of particle size. We have found that ZnFe 2 O 4 undergoes an intercalation-to-conversion reaction sequence, with the initial intercalation process being size dependent. Larger ZnFe 2 O 4 particles (40 nm) follow a two-phase intercalation reaction. In contrast, a solid-solution transformation dominates the early stages of discharge when the particle size is about 6–9 nm. Using a thermodynamic analysis, we find that the size-dependent kinetics originate from the interfacial energy between the two phases. Furthermore, the conversion reaction in both large and small particles favors {111} planes and follows a core-shell reaction mode. Finally, these results elucidate the intrinsic mechanism that permits fast reaction kinetics in smaller nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The role of Anderson’s rule in determining electronic, optical and transport properties of transition metal dichalcogenide heterostructures

Two-dimensional (2D) transition metal dichalcogenides (TMDs) MX 2 (M = Mo, W; X = S, Se, Te) possess unique properties and novel applications in optoelectronics, valleytronics and quantum computation. In this work, we performed first-principles calculations to investigate the electronic, optical and transport properties of the van der Waals (vdW) stacked MX 2 heterostructures formed by two individual MX 2 monolayers. Here, we found that the so-called Anderson's rule can effectively classify the band structures of heterostructures into three types: straddling, staggered and broken gap. The broken gap is gapless, while the other two types possess direct (straddling, staggered) or indirect (staggered) band gaps. The indirect band gaps are formed by the relatively higher energy level of Te-d orbitals or the interlayer couplings of M or X atoms. For a large part of the formed MX2 heterostructures, the conduction band maximum (CBM) and valence band minimum (VBM) reside in two separate monolayers, thus the electron–hole pairs are spatially separated, which may lead to bound excitons with extended lifetimes. The carrier mobilities, which depend on three competitive factors, i.e. elastic modulus, effective mass and deformation potential constant, show larger values for electrons of MX 2 heterostructures compared to their constituent monolayers. Finally, the calculated optical properties reveal strong absorption in the ultraviolet region.

36 MATERIALS SCIENCE↗

Evolution of Oxide–Sulfide Complex Inclusions and Its Correlation with Steel Cleanliness During Electroslag Rapid Remelting (ESRR) of Tool Steel

The evolution of CaO-Al{sub 2}O{sub 3}-MgO-(SiO{sub 2}) inclusions associated with CaS during electroslag rapid remelting (ESRR) of the tool steel with ultra low oxygen (8 ppm) under protective atmosphere was investigated. Thermodynamic calculation was performed to evaluate the oxygen level of liquid steel and the inclusion evolution during ESRR with the help of FactSage software (CON2 database). The results demonstrated that the reoxidation of liquid steel took place during industrial ESRR, resulting in the oxygen pickup of approximately double content. The oxygen level in the steel was determined by [Al]-[O] equilibrium during ESRR, whereas FeO in the slag transferred oxygen into the liquid steel, as indicated by the significant oxygen pickup. The inclusions in the steel electrode are oxide–sulfide type of CaO-Al{sub 2}O{sub 3}-MgO partially wrapped with CaS. The original oxide inclusions that had not been removed in ESRR process were transformed to liquid CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusions through reacting with the dissolved oxygen supplied from the reoxidation of liquid steel and concerned elements in liquid steel during ESRR. These CaO-Al{sub 2}O{sub 3}-SiO{sub 2}-MgO inclusions were invariably associated with patch-type or shell-type CaS, which hold different formation mechanisms. The inclusions ranging from 2 to 4 µm take up a dominant proportion (a little more than 50 pct of the total inclusions) in the remelted ingots, and those larger than 8 µm account for about 3 pct. Melting rates of ESRR not only exerted a negligible effect on the steel cleanliness and the removal efficiency of oxide inclusions, but also on the inclusion size distribution.

36 MATERIALS SCIENCE↗

In Situ Observation of the Precipitation, Aggregation, and Dissolution Behaviors of TiN Inclusion on the Surface of Liquid GCr15 Bearing Steel

In this study, the precipitation, aggregation, and dissolution behaviors of TiN inclusions on the surface of liquid GCr15 bearing steel have been investigated by combining the observations of confocal laser scanning microscope (CLSM) and field emission scanning electron microscope (FE-SEM) with those obtained from energy dispersive spectrometer (EDS) and theoretical analysis. The kinetic results show that the initial concentration of Ti and N are 0.0078 and 0.0049, respectively, the precipitation temperature is between 1640 K and 1680 K (1367 °C and 1407 °C), and the local cooling rate is between 0.5 and 10 K/s; TiN inclusion can precipitate only when the solid fraction is higher than 0.847 and its precipitation radius is between 1 and 6 μm. The precipitation radius of a TiN inclusion in the GCr15 bearing steel sheet can be reduced by decreasing the N content and increasing the cooling strength. The aggregation and densification of multi-particle aggregated TiN inclusions are verified by CLSM observation and theoretical analysis. The inclusions are aggregated by the cavity bridge force (CBF), and the aggregated TiN is formed by solid-phase sintering. The results of force analysis show that CBF plays a dominant role in the aggregation process of the inclusions. The atomic ratio of Ti and V obtained by EDS is 18:1, which may melt TiN and form the liquid inclusion at 1688 K (1415 °C) observed by CLSM. The theoretical analysis is conducted for the dissolution of the TiN inclusions observed by CLSM, which shows that the dissolution of the TiN inclusions is related to the size of the inclusions; the larger the size, the greater the dissolution rate. The long-strip TiN inclusion may be formed by the Ostwald ripening of two TiN inclusions. The TiN inclusions smaller than 3 μm in the GCr15 bearing steel may be formed by the dissolved Ti and N generated by the dissolution of TiN.

36 MATERIALS SCIENCE↗