Engineering Papers⌕ Search

Engineering topics

Li, Jing

Publications and source records attributed to Li, Jing.

At least 181 records · Page 10

Optimal Control by Transfer-Learning

Through the project, a transfer-learning based optimal control methodology was developed. This can significantly reduce the time and data required for model learning and increase operation robustness and resilience via data-driven controller optimization. This methodology includes three major elements: 1) extraction of control knowledge or knowledge of tuning control parameter from a source feedback control task; 2) transferring of control knowledge from the source control task to a target control task (initialization of control parameters for the target control task); and 3) fast-adaptation of control parameters for the target task to achieve optimized performance.

42 ENGINEERING↗

Development of a Point of Care Technology for Military Medical Applications in Austere Environments

NASA, Lawrence Livermore National Laboratory (LLNL) and the Department of Defense (DoD) share a common interest in compact medical diagnostic technologies—also known as “point of care testing” (POCT) technologies. For NASA, the need is to take care of astronauts on deep space missions. For LLNL, the focus is on technologies needed to support homeland security applications. For DoD, the need is to support warfighters in military theaters of operation, especially for prolonged field care and en route care. A recently patented technology, “Portable Medical Diagnosis Instrument” (U.S. Patent 9824870), co-invented by NASA and LLNL, is being developed further in a partnership between NASA, LLNL and Travis Air Force Base, with a focus on military applications. This instrument, the NASA-LLNL Medical Tricorder, can be used for a wide range of clinical samples including breath, saliva and blood. One component of the Tricorder is the NASA E-Nose, a carbon nanotube-based chemical sensor, integrated into a hand-held smart phone, that can detect and measure “breath biomarkers” in the gas phase of exhaled breath. The response of the NASA E-Nose is rapid, which makes it possible to detect various gas-phase substances in real time. The NASA E-Nose, with modification, can also be used for breath condensate analysis. Another component of the Tricorder is a miniaturized microfluidic analyzer, under development by LLNL, that does not require any pumps. The microfluidic analyzer can detect and measure biomarkers in liquid samples, such as blood, saliva and breath condensate. This microfluidic system requires small quantities of liquid sample and can perform analysis very rapidly (seconds to minutes), which makes it possible to detect relevant biomarkers in near real time in the field. The Clinical Investigation Facility (CIF) at Travis Air Force Base is currently conducting research with the goal to develop improved field-able technologies and procedures for the emergency response to life threatening injuries soldiers may receive in theater. This work includes experimental large animal systems and comprehensive collection of clinical specimens and physiological data. NASA and LLNL are partnering with Travis to test and further develop the Tricorder technology for high priority military applications, initially focused on lung injury models and traumatic brain injury.

Loftus, David J.↗

Noninvasive Breath Analysis Using NASA E-Nose Technology for Health Assessment

Clinical breath analysis is based on the fact that many important metabolites and biomarker molecules are present at detectable levels in exhaled breath, and many of these molecules correlate with human disease or correlate with physiological states that could lead to a decline in health. Presented is a technology that utilizes an array of chemical sensors combined with humidity, temperature and pressure for real time breath analysis to correlate the chemical information in the breath with the state and functioning of different human organs. For example, a marker for pulmonary inflammation processes of the lower respiratory tract, e.g. asthma, is the increase of the nitrogen oxide (NO) concentration in breath. Other volatile biomarkers may correlate with infectious process, metabolic conditions and inflammatory diseases, such as traumatic brain injury (TBI). This technology is also called "electronic nose" (E-Nose) in the sense that the device can mimic human nose to smell odors using a pattern recognition technique to analyze the sensor array data. Breath sampling is non-invasive and can be analyzed in real-time.

Li, Jing↗

Effect of Primary Carbides on the Sharpness of Kitchen Knives Made of 8Cr13MoV Steel

Although there are many primary carbides in the cutting edge of knives made of high-carbon martensitic steel, the effect of primary carbides on the sharpness of knives has not been clarified. In this paper, the evolution of primary carbides during the production process of 8Cr13MoV steel was presented. The effect of size and amount of primary carbides on the sharpness of knives was studied via employing rolling forging and diffusion annealing process, respectively. Results indicated that primary carbides easily fell off from cutting edge during cutting process, which would decrease the wear resistance of knives. The refinement of primary carbides could not only improve the wear resistance of cutting edge, but also weaken the fluctuation of sharpness during the service process of knives. By decreasing the amount of primary carbides, the wear resistance of knives would increase effectively, which improved the cutting performance effectively. Reducing the amount of primary carbides and refining the primary carbides in cutting edge were both effective ways to improve the sharpness of knives.

36 MATERIALS SCIENCE↗

Experimental and Theoretical Analyses of Zinc-Vacancy-Induced Room-Temperature Ferromagnetism in ZnO Films

Room-temperature ferromagnetism (RTFM) has been observed in RF magnetron sputtered ZnO films with O{sub 2} as an auxiliary gas after annealing. The films exhibit hexagonal wurtzite structure and observable ferromagnetism. A maximum of saturation magnetization of 4.75 emu/cm{sup 3} is obtained. The zinc vacancies are believed as the RTFM origin, and oxygen vacancies are not an incentive of magnetization of the ZnO films. Theoretical study based on first principles calculation is performed for better understanding of the RTFM in substance. The intrinsic physical mechanism of regulating the ferromagnetic of the ZnO film is analyzed in detail.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Catalytic conversion of rubber wastes to produce aromatic hydrocarbons over USY zeolites: Effect of SiO 2 /Al 2 O 3 mole ratio

Catalytic conversion of rubber wastes to produce an alternative fuel resource is a promising approach to dispose of solid wastes and address environmental issues. In this study, catalytic fast pyrolysis (CFP) of rubber wastes over acidic zeolites was conducted, and the effect of SiO 2 /Al 2 O 3 mole ratio of USY zeolites on the formation of aromatic hydrocarbons was explored. Experimental results indicated that alkenes and aromatic hydrocarbons were the main pyrolytic products obtained from fast pyrolysis of rubber wastes, and the pyrolysis temperature played a vital role in the formation of aromatics with the highest concentration achieved at 750 °C. Furthermore, catalyst types also affected the catalytic degradation of rubber wastes since limonene was completely decomposed in the presence of zeolites. Compared to SAPO-34, zeolites with higher external surface area, stronger Brønsted acid sites, and larger pore size, including USY, HY, and Hβ, were more effective in the production of aromatic hydrocarbons with the highest content obtained from USY catalyzed run. Given the observed effect of SiO 2 /Al 2 O 3 mole ratio of USY zeolites on the formation of aromatic hydrocarbons during the CFP of rubber wastes, USY with low SiO 2 /Al 2 O 3 ratio of 5.3 was more beneficial to the generation of aromatic hydrocarbons, while that with higher SiO 2 /Al 2 O 3 mole ratio (11.5) facilitated the formation of alkenes. Simultaneously, the product distribution of aromatic hydrocarbons obtained from CFP of rubber wastes over USY zeolites was dominated by xylenes, alkylbenzenes, and toluene, and USY with SiO 2 /Al 2 O 3 mole ratio of 5.3 was more active in the production of toluene and xylenes.

30 DIRECT ENERGY CONVERSION↗

A simple vaporous probe with atomic-scale sensitivity to structural ordering and orientation of molecular assembly

Understanding the structural ordering and orientation of interfacial molecular assemblies requires an insight into the penetration depth of the probe molecules which determines the interfacial reactivity. In contrast to the conventional liquid probe-based contact angle measurement in which penetration depth is complicated by the liquid cohesive interaction, we report here a new approach that features a simple combination of vaporous hexane, which involves only van der Waals interaction, and quartz crystal microbalance operated at the third harmonic resonance, which is sensitive to sub-monolayer (0.2%) adsorption. Using this combination, we demonstrated the ability of probing the structural ordering and orientation of the self-assembled monolayers with a sensitivity from penetrating the top portion of the monolayers to interacting with the very top atomic structure at the interface. The determination of the dependence of the adsorption energy of vaporous hexane on the penetration depth in the molecular assembly allowed us to further reveal the atomic-scale origin of the odd–even oscillation, which is also substantiated by density functional theory calculations. The findings have broader implications for designing interfacial reactivities of molecular assemblies with atomic-scale depth precision.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystallization Characteristics and In-Mold Performance of Electroslag Remelting-Type TiO{sub 2}-Bearing Slag

The non-isothermal crystallization characteristics of the electroslag remelting (ESR)-type TiO{sub 2}-bearing slag were studied. The effect of crystallization characteristics of the slag on the in-mold performance was verified by ESR pilot trials operating in a static mode. The results showed that increasing TiO{sub 2} content decreased the crystallization temperature and liquidus temperature of the slag and suppressed the crystallization tendency of the slag. There is no change in the types of the crystalline phases in the slag with different TiO{sub 2} contents during cooling, i.e., 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2}, CaTiO{sub 3}, and CaF{sub 2}. The sequence of crystal precipitation during cooling was 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} to CaTiO{sub 3}, and then CaF{sub 2} with increasing TiO{sub 2} content from 4.2 to 12.6 mass pct. With adding 16.8 mass pct TiO{sub 2} in the slag, the precipitation of 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} and CaTiO{sub 3} took place simultaneously, followed by CaF{sub 2}. With the increase in the TiO{sub 2} content from 4.2 to 16.8 mass pct in the slag, the dominant crystalline phase changed from 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} to CaTiO{sub 3}. The morphology of 11CaO·7Al{sub 2}O{sub 3}·CaF{sub 2} and CaTiO{sub 3} changed from faceted and bonelike to elliptically faceted and blocky, respectively. The morphology of CaF{sub 2} were spherical in all cases, irrespective of TiO{sub 2} contents in the slag. The decrease in the crystallization tendency of the slag with increasing TiO{sub 2} contents was attributed to the decrease in the activity of CaO in the slag. The increasing of TiO{sub 2} content in the slag are favorable for providing thin slag skin and stable heat flux across the slag skin, which improved the surface quality of the as-cast ESR ingot as demonstrated by ESR pilot trials operating in a static mode.

36 MATERIALS SCIENCE↗

Precipitation Mechanism and Reduction of Amount of Primary Carbides During Electroslag Remelting of 8Cr13MoV Stainless Steel

The precipitation and growth of primary carbides in 8Cr13MoV steel during electroslag remelting (ESR) were studied. The effects of melting rate and fill ratio of ESR on the reduction of primary carbides were clarified. Primary carbides M{sub 7}C{sub 3} precipitated from liquid steel at the final stage of solidification, which is attributed to an enrichment of carbon and chromium in liquid steel. The carbon content in the residual liquid steel was the determining factor for the formation of primary carbides. The growth of primary carbides was affected mainly by the chromium-concentration and temperature-field gradients. An appropriate melting rate facilitated the nucleation and growth of dendrites, which caused dendrite closure and prevented the further enrichment of carbon atoms. Primary carbides were refined and their amount was reduced when using a lower ESR melting rate. The fill ratio can affect the uniformity of the temperature field in the liquid metal pool and heat transfer from the slag pool to the liquid metal pool, and an optimal fill ratio resulted in a minimum mushy zone and less primary carbides. The volume fraction of primary carbides was reduced by 23 pct when the melting rate decreased from 150 to 133 kg/h and the fill ratio increased from 0.23 to 0.33.

36 MATERIALS SCIENCE↗

A data-driven framework for sparsity-enhanced surrogates with arbitrary mutually dependent randomness

The challenge of quantifying uncertainty propagation in real-world systems is rooted in the high-dimensionality of the stochastic input and the frequent lack of explicit knowledge of its probability distribution. Traditional approaches show limitations for such problems, especially when the size of the training data is limited. To address these diculties, we have developed a general framework of constructing surrogate models on spaces of stochastic input with arbitrary probability measure irrespective of the mutual dependencies between individual components of the random inputs and the analytical form. The present Data-driven Sparsity-enhancing Rotation for Arbitrary Randomness (DSRAR) framework includes a data-driven construction of multivariate polynomial basis for arbitrary mutually dependent probability measure and a sparsity enhancement rotation procedure. This sparsity-enhancing rotation method was initially proposed in our previous work [1] for Gaussian density distributions, which may not be feasible for non-Gaussian distributions due to the loss of orthogonality after the rotation. To remedy such diculties, we developed a new data-driven approach to construct orthonormal polynomials for polynomials for arbitrary mutually dependent (amdP) randomness, ensuring the constructed basis maintains the orthogonality/near-orthogonality with respect to the density of the rotated random vector, where directly applying the regular polynomial chaos including arbitrary polynomial chaos (aPC) [2] shows limitations due to the assumption of the mutual independence between the components of the random inputs. The developed DSRAR framework leads to accurate recovery, with only limited training data, of a sparse representation of the target functions. The eectiveness of our method is demonstrated in challenging problems such as PDEs and realistic molecular systems within high-dimensional conformational space (O(10)) where the underlying density is implicitly represented by a large collection of sample data, as well as systems with explicitly given non-Gaussian probabilistic measures.

Lei, Huan↗

Mori-Zwanzig reduced models for uncertainty quantification

In many time-dependent problems of practical interest the parameters and/or initial conditions entering the equations describing the evolution of the various quantities exhibit uncertainty. One way to address the problem of how this uncertainty impacts the solution is to expand the solution using polynomial chaos expansions and obtain a system of differential equations for the evolution of the expansion coefficients. We present an application of the Mori-Zwanzig (MZ) formalism to the problem of constructing reduced models of such systems of differential equations. In particular, we construct reduced models for a subset of the polynomial chaos expansion coefficients that are needed for a full description of the uncertainty caused by uncertain parameters or initial conditions. Even though the MZ formalism is exact, its straightforward application to the problem of constructing reduced models for estimating uncertainty involves the computation of memory terms whose cost can become prohibitively expensive. For those cases, we present a Markovian reformulation of the MZ formalism which can lead to approximations that can alleviate some of the computational expense while retaining an accuracy advantage over reduced models that discard the memory altogether. Our results support the conclusion that successful reduced models need to include memory effects.

Mori-Zwanzig, Model Reduction, Uncertainty Quantif↗

Phase evolution of conversion-type electrode for lithium ion batteries

Batteries with conversion-type electrodes exhibit higher energy storage density but suffer much severer capacity fading than those with the intercalation-type electrodes. The capacity fading has been considered as the result of contact failure between the active material and the current collector, or the breakdown of solid electrolyte interphase layer. Here, using a combination of synchrotron X-ray absorption spectroscopy and in situ transmission electron microscopy, we investigate the capacity fading issue of conversion-type materials by studying phase evolution of iron oxide composited structure during later-stage cycles, which is found completely different from its initial lithiation. The accumulative internal passivation phase and the surface layer over cycling enforce a rate-limiting diffusion barrier for the electron transport, which is responsible for the capacity degradation and poor rate capability. This work directly links the performance with the microscopic phase evolution in cycled electrode materials and provides insights into designing conversion-type electrode materials for applications.

25 ENERGY STORAGE↗

Effects of Multiple Laser Peening impacts on Mechanical Properties and Microstructure Evolution of 40CrNiMo Steel

The effects of multiple laser peening impacts on mechanical properties and microstructure of 40CrNiMo steel were investigated. The surface residual stress and microhardness of the samples with different treatments were measured. The surface morphologies, tensile behavior and microstructure of the samples before and after laser peening were compared and analyzed. The experimental results showed that laser peening, especially multiple laser peening impacts has significant effects on the microhardness, residual stress and microstructure of 40CrNiMo steel. The surface roughness and the depth of the pit increased with increasing the impact times. After 3 laser peening impacts, the surface microhardness, compressive residual stress, the strength and ductility were significantly improved. Meanwhile, some microstructures, such as sub-grains, the precipitation of carbide and dislocations were also induced in the surface layer. Additionally, the microscopic strengthening mechanism of multiple laser peening impacts on the mechanical properties of 40CrNiMo steel was analyzed in detail.

36 MATERIALS SCIENCE↗

High-resolution Thermal Infrared Imaging of 3200 Phaethon

We present thermal infrared observations of the active asteroid (and Geminid meteoroid stream parent) 3200 Phaethon using the Very Large Telescope. The images, at 10.7 μm wavelength, were taken with Phaethon at its closest approach to Earth (separation of 0.07 au) in 2017 December, at a linear resolution of about 14 km. We probe the Hill sphere (of radius ∼66 km) for trapped dust and macroscopic bodies, finding neither, and we set limits to the presence of unbound dust. The derived limits to the optical depth of dust near Phaethon depend somewhat on the assumed geometry, but are of an order of 10{sup −5}. The upper limit to the rate of loss of mass in dust is ≲14 kg s{sup −1}. This is ∼50 times smaller than the rate needed to sustain the Geminid meteoroid stream in steady state. The observations thus show that the production of the Geminids does not proceed in a steady state.

79 ASTRONOMY AND ASTROPHYSICS↗