Engineering Papers⌕ Search

Engineering topics

Chen, Xi

Publications and source records attributed to Chen, Xi.

At least 127 records · Page 7

Enhanced Spontaneous Polarization in Ultrathin SnTe Films with Layered Antipolar Structure

2D SnTe films with a thickness of as little as 2 atomic layers (ALs) have recently been shown to be ferroelectric with in–plane polarization. Remarkably, they exhibit transition temperatures (T c ) much higher than that of bulk SnTe. Here, combining molecular beam epitaxy, variable temperature scanning tunneling microscopy, and ab initio calculations, the underlying mechanism of the Tc enhancement is unveiled, which relies on the formation of γ–SnTe, a van der Waals orthorhombic phase with antipolar inter–layer coupling in few–AL thick SnTe films. In this phase, 4n – 2 AL (n = 1, 2, 3…) thick films are found to possess finite in–plane polarization (space group Pmn2 1 ), while 4n AL thick films have zero total polarization (space group Pnma). Above 8 AL, the γ–SnTe phase becomes metastable, and can convert irreversibly to the bulk rock salt phase as the temperature is increased. This finding unambiguously bridges experiments on ultrathin SnTe films with predictions of robust ferroelectricity in GeS–type monochalcogenide monolayers. Here, the observed high transition temperature, together with the strong spin–orbit coupling and van der Waals structure, underlines the potential of atomically thin γ–SnTe films for the development of novel spontaneous polarization–based devices.

2d ferroelectrics↗

De Novo Design and Implementation of a Tandem Acyl Carrier Protein Domain in a Type I Modular Polyketide Synthase

During polyketide and fatty acid biosynthesis, the growing acyl chain is attached to the acyl carrier protein via a thioester linkage. The acyl carrier protein interacts with other enzymes that perform chain elongation and chain modification on the bound acyl chain. Most type I polyketide synthases and fatty acid synthases contain only one acyl carrier protein. However, polyunsaturated fatty acid synthases from deep-sea bacteria contain anywhere from two to nine acyl carrier proteins. Recent studies have shown that this tandem acyl carrier protein feature is responsible for the unusually high fatty acid production rate of deep-sea bacteria. To investigate if a similar strategy can be used to increase the production rate of type I polyketide synthases, a 3×ACP domain was rationally designed and genetically installed in module 6 of 6-deoxyerythronolide B synthase, which is a prototypical type I modular polyketide synthase that naturally harbors just one acyl carrier protein. As a result, this modification resulted in an ~2.5-fold increase in the total amount of polyketide produced in vitro , demonstrating that installing a tandem acyl carrier domain in a type I polyketide synthase is an effective strategy for enhancing the rate of polyketide natural product biosynthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Super Charge Separation and High Voltage Phase in Na x MnO 2

Na x MnO 2 shows Mn 3+ and Mn 4+ charge separation with the charge stripe ordering upon Na deintercalation at x = 5/8. In this paper it is shown that, surprisingly, at lower Na compositions of 5/8 > x ≥ 1/18 the phase evolution pathway of Na x MnO 2 upon Na deintercalation shows a unique phenomenon of super charge separation, where the Mn 3+ and Mn 4+ ions fully charge-separate into charge superplanes formed by succession of charge stripes in the third dimension. Furthermore, the Mn 3+ superplanes attract Na ions electronically, and dominate the antiferromagnetic interactions in NaMnO 2 . Na ions in Mn 3+ superplanes also naturally pillar the MnO 2 layers to form the unusual O1 phases with large interlayer distances at x < 1/3, which dominates the unique electrochemical behavior of NaMnO 2 .

25 ENERGY STORAGE↗

Carbon Nanotube Porins in Amphiphilic Block Copolymers as Fully Synthetic Mimics of Biological Membranes

Biological membranes reflect a fascinating example of a separation system that is multifunctional, tunable, precise, and efficient. Biomimetic membranes, which mimic the architecture of cellular membranes, have the potential to deliver significant improvements in specificity and permeability. In this work, a fully synthetic biomimetic membrane is introduced that incorporates ultra-efficient 1.5 nm diameter carbon nanotube porin (CNTPs) channels in a block-copolymer matrix. It is demonstrated that CNTPs maintain high proton and water permeability in these membranes. CNTPs can also mimic the behavior of biological gap junctions by forming bridges between vesicular compartments that allow transport of small molecules.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Silicon Nanoribbon pH Sensors Protected by a Barrier Membrane with Carbon Nanotube Porins

Limited biocompatibility and fouling propensity can restrict real-world applications of a large variety of biosensors. Biological systems are adept at protecting and separating vital components of biological machinery with semipermeable membranes that often contain defined pores and gates to restrict transmembrane transport only to specific species. Here we use a similar approach for creating fouling-resistant pH sensors. We integrate silicon nanoribbon transistor sensors with an antifouling lipid bilayer coating that contains proton-permeable carbon nanotube porin (CNTP) channels and demonstrate robust pH detection in a variety of complex biological fluids.

47 OTHER INSTRUMENTATION↗

Digital Proxy Simulation of Robotic Hardware

A computer-implemented method, computer program product, and computing system is provided for a digital proxy simulation of robotic hardware. In an implementation, a method may include creating a digital proxy simulation for a robotic hardware wherein the digital simulation and the robotic hardware may share a network interface. a user may be provided with an option to switch between the robotic hardware and the digital proxy simulation. The switch may be executed, upon receiving a user selection, between the robotic hardware and the digital proxy simulation, wherein executing the switch includes transferring input and output signals between the digital proxy simulation and the robotic hardware.

Bacon, James A.↗

FOXP4-AS1 participates in the development and progression of osteosarcoma by downregulating LATS1 via binding to LSD1 and EZH2

Highlights: • We first confirmed that FOXP4-AS1 is overexpressed in OS, and is the independent risk factor in OS prognosis. • We further clarified that Upregulated FOXP4-AS1 promotes the proliferation, migration and cell cycle, but inhibits apoptosis of OS cells. • Finally, we demonstrated that FOXP4-AS1 participates in the development and progression of OS by downregulating LATS1. Osteosarcoma (OS) is the most common malignant bone tumor in children and adolescents. LncRNA has been confirmed to participate in a variety of cancers. The purpose of this study was to explore the effect of FOXP4-AS1 on the development of osteosarcoma (OS) and its underlying mechanism. FOXP4-AS1 expressions in 60 OS tissues and paracancerous tissues were detected by qRT-PCR (quantitative real-time polymerase chain reaction). We confirmed that FOXP4-AS1 was overexpressed in OS tissues than that of paracancerous tissues. The disease-free survival and overall survival of OS patients were not correlated with age, gender and tumor location, but remarkably correlated with FOXP4-AS1 expression, tumor size and lung metastasis. For in vitro experiments, MG63 cells expressed a higher expression of FOXP4-AS1, whereas U2OS cells expressed a lower expression, which were selected for the following studies. Overexpressed FOXP4-AS1 led to enhanced proliferation, migration and invasion, shortened G0/G1 phase, as well as inhibited cell cycle. Knockdown of FOXP4-AS1 in MG63 cells obtained the opposite results. Furthermore, RIP assay indicated that FOXP4-AS1 could inhibit LATS1 expression by binding to LSD1 and EZH2, so as to participate in OS development. In conclusion, these results revealed that FOXP4-AS1 is overexpressed in OS, and is the independent risk factor in OS prognosis. Upregulated FOXP4-AS1 promotes the proliferation, migration and cell cycle, but inhibits apoptosis of OS cells. Furthermore, FOXP4-AS1 participates in the development and progression of OS by downregulating LATS1 via binding to LSD1 and EZH2.

60 APPLIED LIFE SCIENCES↗

Preparation and up-conversion luminescence of Tb3+/Yb3+ co-doped BaO-WO3-SiO2 glass ceramic

Highlights: • The Tb{sup 3+}/Yb{sup 3+} co-doped glass ceramics containing BaWO{sub 4} is prepared. • The optimum heat treatment schedules is obtained. • The up conversion luminescence mechanism is investigated. - Abstract: The Tb{sup 3+}/Yb{sup 3+} co-doped BaO-WO{sub 3}-SiO{sub 2} glass ceramic is prepared by melt crystallization method. The optimum heat treatment schedule is determined on basis of differential scanning calorimetry. The crystal phase is BaWO{sub 4} by X-ray diffraction analysis. The crystal grain sizes are examined by scanning electron microscope and crystal grain sizes increase with the increasing of heat treatment time. In the visible region, the transmittance of glass ceramic is 79%. The up-conversion fluorescence intensity increase with the increasing of heat treatment time up to 90 min and with the increasing of Yb{sup 3+} concentration up to 0.3 mol%. The possible mechanism of up-conversion in Tb{sup 3+}/Yb{sup 3+} co-doped BaWO{sub 4} glass ceramic is discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Reversible Flat to Rippling Phase Transition in Fe Containing Layered Battery Electrode Materials

Layered sodium transition metal oxides of NaTMO 2 (TM = 3d transition metal) show unique capability to mix different compositions of Fe to the TM layer, a phenomenon that does not exist in LiTMO 2 . Here we report a novel spontaneous TM layer rippling in the sodium ion battery cathode materials, revealed by in-situ X-ray diffraction, Cs-corrected scanning transmission electron microscopy and density functional theory simulation, where the softening and distortion of FeO 6 octahedra collectively drives the flat TM planes into rippled ones with inhomogeneous interlayer distance at high voltage. In such a rippling phase, charge and discharge of Na ions take different evolution pathways, resulting in an unusual hysteresis voltage loop. Importantly, upon discharge beyond a certain Na composition, the rippling TM layer will go back to flat, giving the reversibility of such structural evolution in the following cycles.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Wide Pedestal Quiescent H-mode Plasmas in DIII-D Tokamak

Quiescent H-mode (QH-mode) is a naturally ELM-stable high performance operation mode which has been obtained in DIII-D, ASDEX Upgrade, JET, and JT-60U [1 and references within]. The additional transport to maintain constant density and radiation is provided by the benign coherent edge harmonic oscillations mode (EHO) [2] which is thought to be a kink/peeling mode [3]. A new QH-mode regime with enhanced pedestal has been discovered in DIII-D at reactor-relevant low torque and collisionality [4]. The regime was originally found in conventional QH-mode when the counter-Ip neutral beam torque drops to ~2Nm in double null plasma shapes. It is referred to as ‘wide-pedestal QH-mode’ because the pedestal width exceeds the EPED kinetic ballooning mode (KBM) limit [5]. Across the transition from QH to wide-pedestal QH, the pedestal electron pressure generally increases by 60% and widens by 50% and the plasma confinement (ITER Hy98y2) rises by 40%. The onset of broadband edge MHD modes and micro-turbulence accompanied with a lower ExB shear in this region is a common feature of the wide-pedestal QH, instead of EHO. It is conjectured that the increased transport provided by these edge modes reduces the pedestal gradients resulting in a higher pedestal while still remaining below the ELM-limit.

Chen, Xi↗

The Effects of Excess Co on the Phase Composition and Thermoelectric Properties of Half-Heusler NbCoSb

NbCoSb with nominal 19 valence electrons, and is supposed to be metallic, has recently been reported to also exhibit the thermoelectric properties of a heavily doped n-type semiconductor. In this study, we prepared Co-rich NbCo 1+x Sb samples (x = 0, 0.2, 0.3, 0.4, 0.5), and their phase compositions, microstructures and thermoelectric properties were investigated. The Seebeck coefficient increased a great deal with increasing x, due to decreasing carrier concentration, and the total thermal conductivity reduced mainly because of declining κ e . Finally, a peak thermoelectric figure of merit, ZT, was about 0.46 for NbCo 1.3 Sb at 973 K. This enhancement was mainly attributed to the reduction of electric thermal conductivity and the increase of Seebeck coefficient. The excess Co had effects on the carrier concentration, deformation potential E def and DOS effective mass m * . Adding an excessive amount of Co leads to a very high E def , which was detrimental for transport characteristics.

36 MATERIALS SCIENCE↗

Apparatus and methods for memory using in-plane polarization

A memory device includes a semiconductor layer with an in-plane polarization component switchable between a first direction and a second direction. A writing electrode is employed to apply a writing voltage to the semiconductor layer to change the in-plane polarization component between the first direction and the second direction. A reading electrode is employed to apply a reading voltage to the semiconductor layer to measure a tunneling current substantially perpendicular to the polarization direction of the in-plane polarization component. The directions of the reading voltage and the writing voltage are substantially perpendicular to each other. Therefore, the reading process is non-destructive. Thin films (e.g., one unit cell thick) of ferroelectric material can be used in the memory device to increase the miniaturization of the device.

42 ENGINEERING↗

Quasistationary Plasma Predator-Prey System of Coupled Turbulence, Drive, and Sheared E × B Flow During High Performance DIII-D Tokamak Discharges [A New, Quasi-stationary Plasma Predator-Prey System of Coupled Turbulence, Drive, and Sheared E × B Flow During High Performance DIII-D Tokamak Discharges]

A new, long-lived limit cycle oscillation (LCO) regime has been observed in the edge of near zero torque high-performance DIII-D tokamak plasma discharges. These LCOs are localized and comprised of density turbulence, gradient drives, and E X B velocity shear damping ( E and B are the local radial electric and total magnetic fields). Density turbulence sequentially acts as a predator (via turbulence transport) of profile gradients and a prey (via shear suppression) to the E X B velocity shear. Reported here for the first time, a unique spatiotemporal variation of the local E X B velocity which is found to be essential for the existence of this system. The LCO system is quasi-stationary, existing from 3 to 12 plasma energy confinement times (~30 to 900 LCO cycles) limited by hardware constraints. In conclusion, this plasma system appears to contribute strongly to the edge transport in these high-performance and transient-free plasmas as evident from oscillations in transport relevant edge parameters at LCO timescale.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of Interfacial Fracture Toughness of Surface Coatings Using Pulsed-Laser-Induced Ultrasonic Waves

This research develops a new technique for the measurement of interfacial fracture toughness of films/surface coatings using laser-induced ultrasonic waves. Using pulsed laser ablation on the bottom substrate surface, strong stress waves are generated leading to interfacial fractures and coating delamination. Simultaneously, a laser ultrasonic interferometer is used to measure the normal (out-of-plane) displacement of the top surface coating in order to detect coating delamination in a non-destructive manner. We can thus determine the critical laser energy for delamination, yielding the critical stress (that is, the interfacial strength). Subsequently, to examine the interfacial fracture toughness, additional pulsed laser irradiation is applied to a pre-delaminated specimen to show that the delamination area expands. This type of interfacial crack growth can be visualized using laser ultrasonic scanning. Furthermore, the calculation of elastic wave propagation was carried out using a finite-difference time-domain method) in order to accurately estimate the interfacial stress field. In this calculation, the stress distribution around the initial delamination is calculated to obtain the stress intensity factor. Based on the experimental and computational results, interfacial fracture toughness can be quantitatively evaluated. Since this technique relies on a two-laser system in a non-contact approach, it may be useful for a quantitative evaluation of adhesion/bonding quality (including both interfacial fracture strength and toughness) in various environments.

42 ENGINEERING↗