SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Calculations of the ground state energy in the solid phase were performed with the aid of a variational approach. The Morse potential form of the atomic triple potential computed by Kolos and Wolniewicz (1965) was employed for the calculations. The ground state energies of both the liquid and solid phases of spin-aligned atomic hydrogen around the volume of the transition are presented in a graph.
The problem of liquid slosh in spinning containers represents an important factor in an analytical assessment of the destabilizing energy dissipation in dual spin spacecraft. The solution of the governing equations in this problem is involved due to the occurrence of the Coriolis term. Pfeiffer (1974) introduced the concept of homogeneous vorticity. Although the assumption is valid for completely filled ellipsoidal cavities, it is only an approximation for a partially filled cavity. On the basis of the results of a stability analysis, it appears that the assumption of homogeneous vorticity may be true for filling volumes more than 55%, while for lesser volumes this assumption cannot possibly be true, even approximately. Great care should then be taken in using Pfeiffer's model in flow problems involving intrinsic resonances.
An effective theory of superconductivity based on a microscopic theory of the T- and P-breaking spin-liquid state is proposed. There are two independent gauge invariances broken by two separate condensates. The theory may be useful for phenomenological calculations. In particular, it is found that the H(c1) are different for magnetic fields with opposite orientations. It is also found that the polarization of an electromagnetic wave is rotated after reflection from these T- and P-breaking superconductors.
The theory of a two-component quantum fluid comprised of spin-1/2 fermions and nonzero spin bosons is examined. This system is of interest because it embodies a possible quantum liquid metallic phase of highly compressed deuterium. Bose condensation is assumed present and the two cases of nuclear-spin-polarized and -unpolarized systems are considered. A significant feature in the unpolarized case is the presence of a nonmagnetic mode with quadratic dispersion owing its existence to nonzero boson spin. The physical character of this mode is examined in detail within a Bogoliubov approach. The specific heat, bulk modulus, spin susceptibility, and thermal expansion are all determined. Striking contrasts in the specific heats and thermal-expansion coefficients of the liquid and corresponding normal solid metallic phase are predicted.
Electron spin resonance signals of negative ions in liquid helium were observed. The line width and g-value were measured. Electrons injected into helium by field emission from ferromagnetic tips are shown to be polarized. A new technique for the measurement of electron spin polarization is presented.
The purposes of this vanadyl spin probe study are threefold: (1) to establish when the breakdown of motionally narrowed formulas occurs; (2) to analyze the experimental vanadyl EPR line shapes by the stochastic Lioville method as developed by Polnaszek et al. (1973) for slow tumbling in an anisotropic liquid; and (3) to compare the vanadyl probe study results with those of Polnaszek and Freed (1975). Spectral EPR line shapes are simulated for experimental spectra of vanadyl acetylacetonate (VOAA) in nematic liquid crystal butyl p-(p-ethoxyphenoxycarbonyl) phenyl carbonate (BEPC) and Phase V of EM laboratories. It is shown that the use of typical vanadyl complexes as spin probes for nematic liquid crystals simplifies the theoretical analysis and the subsequent interpretation. Guidelines for the breakdown of motionally narrowed formulas are established. Both the slow tumbling aspects and the effects of non-Brownian rotation should be resolved in order to extract quantitative information about molecular ordering and rotational mobility.
The problem of forced fluid sloshing in a partially filled spinning spherical tank is solved numerically using the finite element method. The governing equations include Coriolis acceleration, empirical fluid damping and spatially homogeneous vorticity first introduced by Pfeiffer. An exponential instability similar to flutter is detected in the present simulation for fill ratios below 50 percent. This instability appears in the model as a result of the homogeneous vortex assumption since the free slosh equations are neutrally stable in the Liapunov sense.
Although the fundamental principles of spin stabilization are well established, uncertainty regarding the potential for rapid nutation growth caused by onboard liquids is a continuing concern. NASA and other organizations regularly encounter the issue of rapid nutation growth due to energy dissipation by liquids on spinning vehicles. Of concern is the stability of spinning upper stages and of spacecraft that spin for part or all of their missions. Several missions have required last-minute hardware or operational changes to deal with rapid nutation divergences that were identified late in the program. In some instances, major schedule slips were barely averted. In at least two cases, it was determined that a spinning upper stage was not a viable option. Historically, the "slosh" issue has been addressed by each space vehicle project individually, if it has been addressed at all. Due to budgetary and programmatic constraints, individual projects are unable to address the problem globally. Hence, there has been little effort to collect available test and flight data and use that data to make a coherent, unified picture of the "slosh" effect and how to deal with it. To some extent, each project has had to "reinvent the wheel", which can be both costly and risky. This study is a step toward correcting the situation. Specifically, the goal was to identify and collect available flight and test data for spinning vehicles with onboard liquid propellants. A total of 149 flight data points and 1,692 test points were collected as part of this study. This data was analyzed, correlated, and is presented here in a normalized form. In most cases, the normalization involves a dimensionless nutation time constant that can be used to predict performance of other vehicles with the same type of tank. For some configurations, it was also possible to identify conditions that can lead to resonance between nutational motion and liquid modes. Gaps in the knowledge base are identified and approaches to filling those gaps are outlined. The data presented here has two different but related uses. First, it can be applied directly to current and future spacecraft programs. Second, it can provide truth models for testing analytical techniques. Experience has shown that purely analytical models of the liquid "slosh" effect on spinning vehicles are unreliable unless they are validated against flight or test data. To the author's knowledge, this report contains the most extensive and varied data set available. As such, it should be a good resource for anyone seeking to develop and validate improved analytical techniques. All of the original digital data sets have been archived on disk, with copies provided to NASA/KSC. With some restrictions, many of these data sets can be made available to researchers within the United States. Whenever possible, spacecraft are identified by name in this report. However, several organizations provided access to data with the explicit proviso that their programs not be identified and that parameters be presented only in normalized form. These constraints have been respected.
An analysis of EPR line shapes by the method of Polnaszek, Bruno, and Freed is made for slowly tumbling vanadyl spin probes in viscous nematic liquid crystals. The use of typical vanadyl complexes as spin probes for nematic liquid crystals is shown to simplify the theoretical analysis and the subsequent interpretation. Rotational correlation times tau and orientational ordering parameters S sub Z where slow tumbling effects are expected to be observed in vanadyl EPR spectra are indicated in a plot. Analysis of the inertial effects on the probe reorientation, which are induced by slowly fluctuating torque components of the local solvent structure, yield quantitative values for tau and S sub Z. The weakly ordered probe VOAA is in the slow tumbling region and displays these inertial effects throughout the nematic range of BEPC and Phase V. VOAA exhibits different reorientation behavior near the isotropic-nematic transition temperature than that displayed far below this transition temperature.
ESR line shapes that are appropriate for slowly tumbling vanadyl spin probes in viscous nematic liquid crystals were calculated by the stochastic Liouville method. Because of the symmetry possessed by vanadyl, the analysis and interpretation of these line shapes was simplified considerably. Spectral line shapes agreed well with experimental spectra of VOAcAc in the nematic liquid crystal Phase V and BEPC. Deviations from Brownian rotational diffusion were noted. A slowly fluctuating torque analysis yielded good agreement with the experimental spectra.
The Liquid Motion Experiment (LME), which flew on STS 84 in May 1997, was an investigation of liquid motions in spinning, nutating tanks. LME was designed to quantify the effects of such liquid motions on the stability of spinning spacecraft, which are known to be adversely affected by the energy dissipated by the liquid motions. The LME hardware was essentially a spin table which could be forced to nutate at specified frequencies at a constant cone angle, independently of the spin rate. Cylindrical and spherical test tanks, partially filled with liquids of different viscosities, were located at the periphery of the spin table to simulate a spacecraft with off-axis propellant tanks; one set of tanks contained generic propellant management devices (PMDs). The primary quantitative data from the flight tests were the liquid-induced torques exerted on the tanks about radial and tangential axes through the center of the tank. Visual recordings of the liquid oscillations also provided qualitative information. The flight program incorporated two types of tests: sine sweep tests, in which the spin rate was held constant and the nutation frequency varied over a wide range; and sine dwell test, in which both the spin rate and the nutation frequency were held constant. The sine sweep tests were meant to investigate all the prominent liquid resonant oscillations and the damping of the resonances, and the sine dwell tests were meant to quantify the viscous energy dissipation rate of the liquid oscillations for steady state conditions. The LME flight data were compared to analytical results obtained from two companion IR&D programs at Southwest Research Institute. The comparisons indicated that the models predicted the observed liquid resonances, damping, and energy dissipation rates for many test conditions but not for all. It was concluded that improved models and CFD simulations are needed to resolve the differences. This work is ongoing under a current IR&D program.
Controlled amount of etchant applied to surface of rotating sample removes only few angstroms of material. Technique is suited to study of chemical and crystal structures. Rate can be varied through control of spin frequency, liquid viscosity, droplet size, total etchant volume, etchant concentration.
Conventional heavy fermion (HF) theories require existence of massive fermions. We show that heavy fermion phenomena can also be simply explained by existence of bosons with moderate mass but temperature dependent concentration below the formation temperature T(sub B), which in turn is close to room temperature. The bosons B(++) are proposed to be in chemical equilibrium with a system of holes h(+): B(++) = h(+) + h(+). This equilibrium is governed by a boson breaking function f(T), which determines the decreasing boson density and the increasing fermion density with increasing temperature. Since HF-compounds are hybridized from minimum two elements, we assume in addition existence of another fermion component h(sub s)(+) with temperature independent density. This spectator component is thought to be the main agent in binding the bosons in analogy with electronic or muonic molecules. Using a linear boson breaking function we can explain temperature dependence of the giant linear specific heat coefficient gamma(T) coming essentially from bosons. The maxima in resistivity, Hall coefficient, and susceptibility are explained by boson localization effects due to the Wigner crystallization. The antiferromagnetic transitions in turn are explained by similar localization of the pairing fermion system when their density n(sub h)(T(sub FL)) becomes lower than n(sub WC), the critical density of Wigner crystallization. The model applies irrespective whether a compound is superconducting or not. The same model explains the occurrence of low temperature antiferromagnetism also in high-T(sub c) superconductors. The double transition in UPt3 is proposed to be due to the transition of the pairing fermion liquid from spin polarized to unpolarized state.
The escape of Mercury from the stable spin-orbit resonance in which the spin angular velocity is twice the orbital mean motion (2n) requires that the kinematic viscosity of a molten core with a laminar boundary layer be comparable to that of water (0.01 sq cm/s) and the tidal Q be less than about 100. If the boundary layer is turbulent, escape from the resonance is only consistent with a liquid core of low viscosity if the critical Reynolds number for the onset of turbulence is above about 500, the moment difference (B - A)/C is below about 0.00001, and the tidal dissipation factor Q is less than about 40. These conclusions depend on the assumptions that Mercury's obliquity was near 0 deg at the time of resonance passage, that the liquid core was not stably stratified at the time at which Mercury passed through the resonance, that a turbulent boundary layer can be characterized by a turbulent or eddy viscosity coefficient, and that the most important coupling between core and mantle is a viscous coupling at a smooth spherical boundary.
Techniques of generating monodisperse sprays and information concerning chemical liquids used in agricultural aviation are surveyed. The periodic dispersion of liquid jet, the spinning disk method, and ultrasonic atomization are the techniques discussed. Conceptually designed spray nozzles for generating monodisperse sprays are assessed. These are based on the classification of the drops using centrifugal force, on using two opposing liquid laden air jets, and on operating a spinning disk at an overloaded flow. Performance requirements for the designs are described and estimates of the operational characteristics are presented.
The problem of forced fluid vibrations in a partially filled spinning spherical tank is solved numerically by using the finite element method. The governing equations include Coriolis acceleration and spatially homogeneous vorticity. An exponential instability is detected in the present simulation for fill ratios below 0.5 and centrifugal acceleration to thrust ratios less than 1.7. This fictitious instability appears in the model as a result of the homogeneous vortex assumption since the free slosh equations are neutrally stable in the Liapunov sense.
A document proposes an improved liquid- ring nutation damper for a spin-stabilized spacecraft. The improvement addresses the problem of accommodating thermal expansion of the damping liquid. Heretofore, the problem has been solved by either (1) filling the ring completely with liquid and accommodating expansion by attaching a bellows or (2) partially filling the ring and accepting the formation of bubbles. The disadvantage of (1) is that a bellows is expensive and may not be reliable; the disadvantage of (2) is that bubbles can cause fluid lockup and consequent loss of damping. In the improved damper, the ring would be nearly completely filled with liquid, and expansion would be accommodated, but not by a bellows. Instead, an escape tube would be attached to the ring. The escape tube would be positioned and oriented so that the artificial gravitation and the associated buoyant force generated by the spin of the spacecraft would cause the bubbles to migrate toward the tip of the tube. In addition, when the spacecraft was on the launch pad, the escape tube would be at the top of the ring, so that bubbles would rise into the tube.
A brief summary of the nominal cryogenic performance of the Dewar is presented, with emphasis on several aspects of the helium and spacecraft dynamical behavior. The occurrence of temperature and pressure oscillators in the Dewar porous plug is examined. The impact of the internal instrument malfunctions and of external radiation sources on the performance of the Dewar and of the instruments is reviewed. From measurements of the COBE spacecraft spin rate, the spin coupling of the liquid helium to the walls of the Dewar was monitored. The spin measurements are analyzed and a model for the coupling is presented. A number of 'lessons learned' from the COBE mission are reviewed, and the applicability of these lessons to future missions involving cryogenic payloads is addressed.