Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “REFLECTION COEFFICIENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

An Interferometric Method of Measuring Reflection Coefficients

A method for determining the reflection coefficients of optical elements, which is based on the use of a reflection interferometer, is proposed. The results of measurements with a He–Ne laser for several samples with different reflectivity levels are presented. Comparison with results of conventional measurements is made. The gain from the use of the reflection interferometer is estimated.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Decay of photoinduced oscillations of the optical reflection coefficient of bismuth

A model describing the decay of photoinduced oscillations of the optical reflection coefficient R of bismuth is constructed, taking the crystal lattice anharmonicity into account. The decay time of oscillations of R is calculated as a function of the energy density of a laser pulse. The results of calculations explain the experimental data on the anomalously strong decay of oscillations of the optical reflection coefficient of bismuth (the decay time decreases by more than an order of magnitude with an increase in the laser pulse energy density from 0 to 4 mJ/cm{sup 2})

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

PyOECP: A flexible open-source software for the measurement and modeling of the dielectric spectrum from the reflection coefficient

We present PyOECP, a Python-based flexible open-source software for estimating and modeling the complex permittivity obtained from the open-ended coaxial probe (OECP) technique. The transformation of the measured reflection coefficient to complex permittivity is performed based on two different models, including the capacitance model and the antenna model. The software library contains dielectric spectra of common reference liquids, which can be used to transform the reflection coefficient into the dielectric spectra. Several Python routines that are commonly employed (e.g., SciPy and NumPy) are only required so that the users can alter the software structure depending on their needs. The modeling algorithm exploits the Markov chain Monte Carlo method for the data regression. The discrete relaxation models can be built by a proper combination of well-known relaxation models. In addition to these models, the electrode polarization, which is a common measurement artifact for interpreting the dielectric spectra, can be incorporated in the modeling algorithm. A continuous relaxation model, which solves the Fredholm integral equation of the first kind (a mathematically ill-posed problem) is also included.

Yoon, Tae-Jun↗

Characterization of interface reflection coefficients using a finite-difference injection technique

In this paper, a numerical wave field injection technique for characterizing the reflection coefficient of a planar medium interface is proposed. By injecting recorded wave field quantities into a 3D finite-difference calculation, two key objectives are addressed: first, the recorded wave field is separated into its incident and reflected constituents without the need of spatial Fourier transforms or a temporal separation of incident and reflected parts in the recorded data. Second, the separated constituents are independently extrapolated to the location of the reflecting interface to determine its reflecting properties. The methodology is experimentally validated on 3D laboratory data consisting of reflections from the water-air interface in a water tank and is shown to give accurate results for incidence angles of up to 60°.

58 GEOSCIENCES↗

Effect of microwave reflection from the region of electron cyclotron resonance heating in the L-2M stellarator

In experiments on electron cyclotron resonance (ECR) heating of plasma at the second harmonic of the electron gyrofrequency in the L-2M stellarator, the effect of partial reflection of high-power gyrotron radiation from the ECR heating region located in the center of the plasma column was revealed. The reflection coefficient is found to be on the order of 10{sup −3}. The coefficient of reflection of an extraordinary wave from the second-harmonic ECR region is calculated in the one-dimensional full-wave model. The calculated and measured values of the reflection coefficient are found to coincide in order of magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Multiple-scale analysis for resonance reflection by a one-dimensional rectangular barrier in the Gross-Pitaevskii problem

We consider a quantum above-barrier reflection of a Bose-Einstein condensate by a one-dimensional rectangular potential barrier, or by a potential well, for nonlinear Schroedinger equation (Gross-Pitaevskii equation) with a small nonlinearity. The most interesting case is realized in resonances when the reflection coefficient is equal to zero for the linear Schroedinger equation. Then the reflection is determined only by small nonlinear term in the Gross-Pitaevskii equation. A simple analytic expression has been obtained for the reflection coefficient produced only by the nonlinearity. An analytical condition is found when common action of potential barrier and nonlinearity produces a zero reflection coefficient. The reflection coefficient is derived analytically in the vicinity of resonances which are shifted by nonlinearity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Precipitation of energetic neutral atoms and induced non-thermal escape fluxes from the Martian atmosphere

The precipitation of energetic neutral atoms, produced through charge exchange collisions between solar wind ions and thermal atmospheric gases, is investigated for the Martian atmosphere. Connections between parameters of precipitating fast ions and resulting escape fluxes, altitude-dependent energy distributions of fast atoms and their coefficients of reflection from the Mars atmosphere, are established using accurate cross sections in Monte Carlo (MC) simulations. Distributions of secondary hot (SH) atoms and molecules, induced by precipitating particles, have been obtained and applied for computations of the non-thermal escape fluxes. A new collisional database on accurate energy-angular-dependent cross sections, required for description of the energy-momentum transfer in collisions of precipitating particles and production of non-thermal atmospheric atoms and molecules, is reported with analytic fitting equations. Three-dimensional MC simulations with accurate energy-angular-dependent cross sections have been carried out to track large ensembles of energetic atoms in a time-dependent manner as they propagate into the Martian atmosphere and transfer their energy to the ambient atoms and molecules. Results of the MC simulations on the energy-deposition altitude profiles, reflection coefficients, and time-dependent atmospheric heating, obtained for the isotropic hard sphere and anisotropic quantum cross sections, are compared. Atmospheric heating rates, thermalization depths, altitude profiles of production rates, energy distributions of SH atoms and molecules, and induced escape fluxes have been determined.

79 ASTRONOMY AND ASTROPHYSICS↗

Experimental Investigations on Pulsed Nd:YAG Laser Welding of C17300 Copper-Beryllium and 49Ni-Fe Soft Magnetic Alloys

Copper-beryllium and soft magnetic alloys must be joined in electrical and electro-mechanical applications. There is a high difference in melting temperatures of these alloys which cause to make the joining process very difficult. In addition, copper-beryllium alloys are of age hardenable alloys and precipitations can brittle the weld. 49Ni-Fe alloy is very hot crack sensitive. Moreover, these alloys have different heat transfer coefficients and reflection of laser beam in laser welding process. Therefore, the control of welding parameters on the formation of adequate weld puddle composition is very difficult. Laser welding is an advanced technique for joining of dissimilar materials since it can precisely control and adjust the welding parameters. In this study, a 100W Nd:YAG pulsed laser machine was used for joining 49Ni-Fe soft magnetic to C17300 copper-beryllium alloys. Welding of samples was carried out autogenously by changing the pulse duration, diameter of beam, welding speed, voltage and frequency. The spacing between samples was set to almost zero. The ample were butt welded. It was required to apply high voltage in this study due to high reflection coefficient of copper alloys. Metallography, SEM analysis, XRD and microhardness measurement was used for survey of results. The results show that the weld strength depends upon the chemical composition of the joints. To change the wells composition and heat input of the welds, it was attempted to deviate the laser focus away from the weld centerline. The best strength was achieved by deviation of the laser beam away about 0.1mm from the weld centerline. The result shows no intermetallic compounds if the laser beam is deviated away from the joint.

36 MATERIALS SCIENCE↗

Method for manufacturing a fibre reflection interferometer based on a metal-dielectric diffraction structure

A new method for manufacturing a two-mirror reflection fibre interferometer in a single-mode fibre consisting of an input mirror with an asymmetric reflection coefficients and a highly reflective end mirror is presented and experimentally demonstrated. The input mirror is based on a metal-dielectric diffraction structure in the form of an aperture in an aluminium film and a dielectric multilayer coating, which provides asymmetry of the reflection coefficient. The method includes the calculation of the energy coefficients of the aluminium film with a hole, the determination of the optimal diameter of the hole, as well as making of the hole, the entrance mirror and the resonator with a short fibre base. A sample interferometer is demonstrated that has an increased (at least by two orders of magnitude) radiation resistance compared to variants based on a continuous metal film, namely, at least 100 mW of radiation in a single-mode SMF-28e fibre at a wavelength of 1550 nm. (fibre optics)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The Role of Excitation Photons Energy in the Photoinduced Carrier Dynamics in InGaAs/InAlAs Superlattice Heterostructures

The influence of excitation photons energy on the relaxation times of photoexcited carriers is studied. The involved relaxation mechanisms are evaluated and the reflection coefficient of the InGaAs/InAlAs superlattice heterostructures is analyzed. A model is built for the reflection coefficient of the InAlAs barrier layer, depending on the excitation photons energy. The resonance behavior of the reflection coefficient is explained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of roughness, deterministic and random errors in film thickness on the reflecting properties of aperiodic mirrors for the EUV range

By the example of three aperiodic multilayer Mo/Si mirrors (AMM) for the wavelength ranges 17–21 nm, 24–29 nm, and 28–33 nm we have studied numerically the effect of the linearly determinisctic and random fluctuations of the film thickness and the interlayer roughness on the spectral dependences of the reflection coefficient. The simulation results are used to solve the inverse problem of reconstructing the interlayer roughness and the thickness of individual films from the measured dependences of the extreme UV radiation reflection coefficients. It is shown that the 'asymmetry' of the boundaries affects the magnitude and slope of the reflection coefficient plateau. Random fluctuations of the film thickness with the variance of 1%–2% weakly influence the reflection characteristics of AMMs and allow reliable reconstruction of the thickness of individual films. The fluctuations with the variance 8%–10% allow the estimation of individual thicknesses, but the reflection curve in this case strongly differs from the desirable one. Larger fluctuations do not allow the reconstruction of the AMM structure. The basic criteria for high-quality AMM synthesis are formulated. (extreme laser radiation: physics and fundamental applications)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Determination of the coefficient of reflection of metastable argon atoms from the discharge tube wall

Radial profiles of the density of metastable atoms Ar({sup 3}P{sub 2}) in the positive column of a dc glow discharge in argon were measured. Gas-discharge glass tubes with clean inner surfaces and surfaces covered with a carbonitride or carbon film were utilized. The parameters of the discharge plasma under experimental conditions were calculated in the framework of a one-dimensional (along the tube radius) discharge model. The coefficient K of reflection of Ar({sup 3}P{sub 2}) atoms from the tube wall was estimated by comparing the measured and calculated density profiles. It is found that, for a clean tube wall, the coefficient of reflection is K = 0.4 ± 0.2, whereas for a wall covered with a carbonitride or carbon film, it is K < 0.2.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Flocculation and Sedimentation in Suspensions Using Ultrasonic Wave Reflection

This work was undertaken to help understand and interpret the ultrasonic wave reflection (UWR) response of portland cement paste as it transforms from a fluid-like suspension to a solid in the first hours after mixing. A high impact polystyrene buffer (delay line) was used to measure small changes in the P-wave and S-wave reflection coefficients. Two materials were studied: a non-hydrating colloidal alumina suspension whose microstructure was manipulated between dispersed and flocculated states by adjusting the pH, and a coarse silica suspension that readily sedimented. The S-wave reflection coefficient clearly distinguished between dispersed and flocculated states. Sedimentation of particles in dispersed suspensions was distinguished using the P-wave reflection coefficient. Based on these findings, the observed P- and S-wave responses from hydrating portland cement paste are interpreted in terms of flocculation and sedimentation processes.

36 MATERIALS SCIENCE↗

Optical Elements: Effect of structural defects of aperiodic multilayer mirrors on the properties of reflected (sub)femtosecond pulses

The effect of structural defects (for example, of interlayer roughness, layer thickness fluctuations and departures of Mo film density from the tabular one) on the amplitude and phase of the complex reflection coefficient as well as on the amplitude and duration of reflected pulses is numerically studied by the example of a model aperiodic Mo/Si multilayer mirror intended for the compression of a chirped pulse with a spectrum lying in a 50 – 80 eV photon energy range. The departures of Mo film density from the tabular values and film thickness fluctuations are shown to exert the strongest effect on the amplitude and duration of the reflected pulses. The interlayer roughness has a comparable effect on the amplitude of the reflection coefficient, but its effect on the duration of reflected pulses is weaker. Even small film thickness fluctuations may give rise to additional reflected pulses of high intensity, which are delayed in time relative to the principal pulse. The Mo-film density in a Mo/Si mirror is shown to vary from 0.77 to 0.97 (in units of the tabular value for massive molybdenum) as the film thickness varies from 1.5 to 5.5 nm. We discuss the key problems that have to be solved in the development of the fabrication technology of multilayer mirrors with desired characteristics. (paper)

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Measurement Temperature on Electrical Cable Frequency Domain Reflectometry Response

In nuclear power plants, electrical cables are exposed to stressors, such as elevated temperature and radiation. Evaluation of the effect of stressors on the lifetime of electrical cables can be conducted using offline electrical reflectometry techniques, such as frequency domain reflectometry (FDR). However, recent work has raised the concern that FDR measurements at temperatures higher than ambient may diminish or reduce the response due to stressors, potentially leading to incorrect predictions of electrical cable damage and lifetime. In this work, we explore the FDR response of an electrical cable exposed to an oven-based thermal stressor up to 140°C, including both ramping up and ramping down temperature. It was observed that, for both the oven entrance and exit, an increase in the FDR measurement temperature led to a decrease in the FDR reflection coefficient. In particular, it was found that the reflection coefficient at the oven entrance decreased from the ambient measurement by approximately 7%, 22%, and 36% at a temperature of 60°C, 100°C, and 140°C, respectively.

Spencer, Mychal P.↗

Scattering of Klein–Gordon particles by a Kink-like potential

The Klein–Gordon equation for the non-minimal vector and a scalar Kink-like potential is solved in terms of the hypergeometric functions. The scattering problem, i.e. the transmission and reflection coefficients, is studied as well. -- Highlights: •The Klein–Gordon equation for the non-minimal vector and a scalar Kink-like potential is solved. •We have calculated the corresponding transmission and reflection coefficients. •We discussed the behavior of the reflection and transmission coefficients vs. energy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗