SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Here, we report carbon-supported Ni-nanoparticles as reusable catalysts for reductive amidation of nitro compounds with polylactic acid (PLA).
The use of γ-Al 2 O 3 -supported Ni catalysts promoted with either Cu or Fe was investigated for the reductive catalytic fractionation (RCF) of hybrid poplar in methanol at 200 and 250 °C. The effectiveness of lignin depolymerization was quantified in terms of the lignin oil production, the quantity and distribution of identifiable monomers present in the lignin oil, and the yield of residual solids. All of the Ni-based catalysts tested provided improved yields of lignin oil and monomers, along with reduced char formation, relative to blank (sans catalyst) runs. The highest monomer yield of 51 % was obtained at 250 °C over a 20 wt.% Ni-5 wt.% Cu/Al 2 O 3 catalyst, the improved performance obtained through Cu promotion being attributed to the ability of Cu to facilitate NiO reduction, resulting in an increased amount of Ni 0 on the catalyst surface and, consequently, improved hydrogenation activity. Finally, the main monomers formed were propanol-, propyl- and propenyl-substituted guaiacol and syringol, the S/G ratio of the products corresponding closely to that in the native lignin.
We report evidence for superconductivity with onset temperatures up to 11 K in thin films of the infinite-layer nickelate parent compound NdNiO 2 . A combination of oxide molecular beam epitaxy and atomic hydrogen reduction yields samples with high crystallinity and low residual resistivities, a substantial fraction of which exhibit superconducting transitions. We survey a large series of samples with a variety of techniques, including electrical transport, scanning transmission electron microscopy, x-ray absorption spectroscopy, and resonant inelastic x-ray scattering, to investigate the possible origins of superconductivity. We propose that superconductivity could be intrinsic to the undoped infinite-layer nickelates but suppressed by disorder due to a possibly sign-changing order parameter, a finding which would necessitate a reconsideration of the nickelate phase diagram. Another possible hypothesis is that the parent materials can be hole doped from randomly dispersed apical oxygen atoms, which would suggest an alternative pathway for achieving superconductivity. Published by the American Physical Society 2025
The reactivity of 2,4,6-triphenylpyridinium-substituted nickel(II)-salicyliminato catalysts in ethylene polymerization has been explored. Here, the known complex 6a equipped with a 2,6-diisopropylphenyl group affords polyethylene with M n = 10-12 kDa at 19 ⁰C, while 8a possessing the bulkier 2,6-diphenylphenyl moiety gives polymer with M n = 270-310 kDa. The stability of catalyst 6a depends on the borane activator. If B(C 6 F 5 ) 3 is employed, enhanced stability is observed compared with using 3H 2 O·B(C 6 F 5 ) 3 activator. Catalyst 6a decomposes forming a hydroxyl-bridged dimer 14 which may be reac-tivated, albeit inefficiently, by excess borane activator. Polymer formed by 6a contains ca. 3-6% of 2-trifluoromethylphenyl, pentafluorophenyl, and 3,5-bis(trifluoromethyl)phenyl end groups combined. The pentafluoro-phenyl end group originates from reaction of 6a with borane activator, and from reactivation of hydroxyl-bridged dimer 14. 3,5-Bis(trifluoromethyl)phenyl end groups are likely formed in a reaction sequence initiated by protonation of one aryl group in NaBArF which creates B[C 6 H 3 (CF 3 ) 2 ] 3 . The triarylborane can then react with 6a or 14 transferring the 3,5-bis(trifluoromethyl)phenyl group to nickel.
Carbonation of alkaline earth metals ( e.g. , magnesium (Mg)) and sulfidation of nickel (Ni) are promising methods to achieve concurrent carbon mineralization and selective Ni recovery. However, the coexistence of alkaline earth metals and Ni from silicate ores or mining wastewater complicates the carbonation and sulfidation owing to cation coprecipitation. To better understand simultaneous metal carbonation and Ni-sulfide formation, we used Mg- and Ni-containing solutions and systematically investigated the Mg and Ni coprecipitates’ phase transformation during sequential/concurrent carbonation and sulfidation. During a single carbonation process, hydromagnesite dehydrated and formed magnesite over time. Nickel bicarbonate formed and became a Mg–Ni carbonate solid solution because of their similar ionic radii. During a single sulfidation process, the pH did not affect Ni-sulfide formation, but it controlled Mg behavior. Specifically, at pH 9.6, brucite formed, while at pH 7.8, Mg 2+ remained in the solution. For the sequential carbonation–sulfidation process, Ni-carbonate formed during carbonation converted to Ni-sulfide because of the low Ni-sulfide K sp . For the sulfidation–carbonation process, Ni-sulfide remained the same even after carbonation and Mg-carbonate precipitates. For the concurrent carbonation and sulfidation process, Mg-carbonate and Ni-sulfide formed simultaneously. Finally, this study develops a scientific foundation of carbonation and sulfidation processes, benefiting coupled CO 2 storage and sulfide-enabled resource recovery.
Atomistic structures of materials offer valuable insights into their functionality. Determining these structures remains a fundamental challenge in materials science, especially for systems with defects. While both experimental and computational methods exist, each has limitations in resolving nanoscale structures. Core-level spectroscopies, such as X-ray absorption (XAS) or electron energy-loss spectroscopies (EELS), have been used to determine the local bonding environment and structure of materials. Recently, machine learning (ML) methods have been applied to extract structural and bonding information from XAS/EELS data. However, frameworks relying solely on a single data stream, defined as characterization data derived from a single element using one technique, are often insufficient because multiple local environments can yield similar spectral features, making it challenging to differentiate between competing structural hypotheses. Here, in this work, we address this challenge by integrating multimodal ab initio simulations, experimental data acquisition, and ML techniques for structure characterization. Our goal is to determine local structures and properties using EELS and XAS data from multiple elements and edges. To showcase our approach, we use various lithium nickel manganese cobalt (NMC) oxide compounds which are used for lithium ion batteries, including those with oxygen vacancies and antisite defects, as the sample material system. We successfully inferred local element content, ranging from lithium to transition metals, with quantitative agreement with experimental data. Beyond local element inference, we find that ML model based on multimodal spectroscopic data is able to determine whether local defects such as oxygen vacancy and antisites are present, a task which is impossible for single mode spectra or other experimental techniques. Furthermore, our framework is able to provide physical interpretability, bridging spectroscopy with the local atomic and electronic structures.
Molybdenum sulfide-based catalysts, such as nickel–molybdenum on alumina (NiMoS x /Al 2 O 3 ), are widely used in hydrotreating and have potential for catalyzing waste plastic conversion via hydrogenolysis, yet their performance, such as reaction kinetics and network, for amide-rich polymer feeds is poorly defined. Here we combine Nylon 66 with the amide model compound, N,N-dibutylhexanediamide (DBDAD), to quantify hydrodeoxygenation (HDO) and hydrodenitrogenation (HDN) chemistry in a stirred batch reactor (53 bar H 2 , 280–320°C). DBDAD conversion is near-linear with time, indicating strong adsorption of the substrates on the active sites. Time-resolved product identification indicates parallel C─O first-cleavagedeoxygenation (DO) and C─N first-cleavagedenitrogenation (DN) sequences proceeding through amine and diol intermediates, respectively, to C 4 ─C 6 alkanes. Increasing temperature shifts selectivity toward DN, decreasing the initial r(DO)/r(DN) from 1.38 (280°C) to 0.69 (320°C), with an apparent activation energy of 173 kJ mol −1 for DBDAD conversion. At 300°C, nylon 66 converts faster than DBDAD, producing a complex mixture of oxygen- and nitrogen-containing species and an initial rate ratio r(DO)/r(DN) of 1.6. No heteroaromatic nitrogen products are detected by the method used. These results provide reaction pathways and product signatures relevant to hydro-processing catalysts exposed to polyamide-derived streams.
The discovery of high-temperature superconductivity in layered nickelates under pressure has recently triggered enormous interest. Studies of these compounds have revealed a density-wave-like transition at ambient pressure, though its connection with superconductivity is still not well understood. Here, we report a detailed µSR study on single crystals of trilayer nickelate La4Ni3O10 at ambient pressure. We have identified a spin-density-wave (SDW) transition at the temperature of 𝑇N∼130K, as well as a broad crossover around 70–100 K. Based on the temperature dependence of the muon precession amplitudes and magnetic susceptibility, we attribute this additional crossover either to a spin reorientation, or to an inhomogeneous SDW ordering.
NiMoO x compounds are widely regarded as among the most efficient non-noble metal catalysts for the hydrogen evolution reaction (HER). Nevertheless, understanding the structural evolution under in situ conditions and further enhancing their performance remain key challenges. Herein, we report that single-atom Mo doping in NiO significantly enhances its HER activity, reducing the overpotential to 131 mV at 10 mA cm −2 compared to undoped NiO. In situ X-ray absorption spectroscopy and Raman spectroscopy reveal that under catalytic conditions, Mo single atoms remain structurally stable, while Ni 2+ species in NiO are converted to Ni(OH) 2 in alkaline media under the applied working potential for HER. Notably, this transformation is absent in undoped NiO, indicating that Mo doping promotes the formation of active Ni(OH) 2 sites, which, in turn, accelerate the rate-limiting water dissociation step. These findings provide critical mechanistic insights into the structural evolution of NiMoO x during alkaline HER and highlight the importance of in situ studies in the development of highly efficient catalysts.
Abstract A key open question in the study of layered superconducting nickelate films is the role that hydrogen incorporation into the lattice plays in the appearance of the superconducting state. Due to the challenges of stabilizing highly crystalline square planar nickelate films, films are prepared by the deposition of a more stable parent compound which is then transformed into the target phaseviaa topotactic reaction with a strongly reducing agent such as CaH 2 . Recent studies, both experimental and theoretical, have introduced the possibility that the incorporation of hydrogen from the reducing agent into the nickelate lattice may be critical for the superconductivity. In this work, we use secondary ion mass spectrometry to examine superconducting La 1−x X x NiO 2 / SrTiO 3 (X= Ca and Sr) and Nd 6 Ni 5 O 12 / NdGaO 3 films, along with non-superconducting NdNiO 2 / SrTiO 3 and (Nd,Sr)NiO 2 / SrTiO 3 . We find no evidence for extensive hydrogen incorporation across a broad range of samples, including both superconducting and non-superconducting films. Theoretical calculations indicate that hydrogen incorporation is broadly energetically unfavorable in these systems, supporting our conclusion that extensive hydrogen incorporation is not generally required to achieve a superconducting state in layered square-planar nickelates.
Superconductivity in infinite-layer nickelates has stirred much research interest, to which questions regarding the nature of superconductivity remain elusive. A critical leap forward to address these intricate questions is through the growth of high-crystallinity infinite-layer nickelates, including the “parent” phase. Here, we report the synthesis of a high-quality thin-film nickelate, NdNiO 2 . This is achieved through the growth of a perovskite precursor phase (NdNiO 3 ) of superior crystallinity on the NdGaO 3 substrate by off-axis RF magnetron sputtering and a low-temperature topochemical reduction using NaH. We observe a nonlinear Hall effect at low temperatures in this “non-doped” phase. We further study the electronic properties using advanced X-ray scattering and first-principles calculations. We observe spectroscopic indications of the enhanced two-dimensionality and a reduced hybridization of Nd 5d and Ni 3d orbitals. These findings unlock new pathways for preparing high-quality infinite-layer nickelates and provide new insights into the intrinsic features of these compounds.
Layered oxides, in which transition metal atoms form a honeycomb lattice, are known for complex magnetic phase diagrams. In this work we study the doped compounds, Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$, $D$ = Mg, Ga, and Co (0.10 ≤ $x$ ≤ 0.25), to understand how chemical dilution at the nickel site influences the stability of magnetic exchanges within the honeycomb layer of the parent, Na$_2$ Ni$_2$ TeO$_6$. Here, the studied compounds were found to crystallize in $P6_3/mcm$ space group common to P2 type layered oxides. In general, the lattice parameters and the unit cell volume expanded with increased doping. The oxidation states determined from X-ray photoelectron spectroscopy were consistent with bond valence sum estimates, that confirmed the presence of Ni$^{2+}$, Mg$^{2+}$, Ga$^{3+}$, Co$^{2+}$ in our samples. Irrespective of magnetic or non-magnetic doping, the magnetic phase transition temperature ($T_N$) of the doped compounds were reduced from that of Na$_2$ Ni$_2$ TeO$_6$ or Na$_2$ Co$_2$ TeO$_6$, and lay between 21.7 K and 26.8 K. The effective paramagnetic moments extracted from Curie–Weiss analysis were in the range 3.17 μ B to 3.84 μ B and the Weiss temperatures were between $-15$ K and $-25$ K, suggesting antiferromagnetism. Mg- and Ga-doped compounds showed free spin formation, indicated by Curie–Weiss tails in their magnetic susceptibility. Our results suggest emergence of short-range magnetic correlations in Na$_2$(Ni$_{2-x}$D$_x$)TeO$_6$, enhanced due to the depletion of the Ni honeycomb lattice.
The discovery of superconductivity in square-planar nickelates has offered a rich materials platform to explore the origins of high-temperature superconductivity. However, experimental investigations have largely been limited to the infinite-layer R NiO 2 ( R , rare earth) nickelates. For this work we constructed a phase diagram of multilayer square-planar Nd n+1 Ni n O 2n+2 compounds and found signatures of superconductivity for dimensionality n = 4 to 8. Upon decreasing n , the superconducting anisotropy evolves owing to 4ƒ electron effects, and electronic structure characteristics approach cuprate-like behavior. Magnetic fluctuations persist from within the superconducting regime and into the overdoped, nonsuperconducting regime. The superconducting regime overlaps with that of chemically doped infinite-layer nickelates, demonstrating underlying commonalities as well as differences across varying structural realizations of square-planar nickelates. Our work establishes this layered template for creating new nickel-based superconductors.
This work presents a MOOSE-based Multiphysics model of the LOTUS MSR reactor system. The model includes the coarse-mesh turbulent thermal-hydraulics including passive advection of delayed neutron precursors of the primary system through Pronghorn, the power density and neutronics calculation employing Griffin, and the chemical interactions through Gibbs energy minimization and redox potential with Thermochimica. Incorporating a plate-out model, the full multi-physics model is used to evaluate the effects of deposition and removal of solid compounds formed in the molten salt in the reactor surfaces, evaluating the concentrations and regions in which nickel, chromium and iron would be deposited. Results indicate an almost isothermal state of the fuel during operation at 25 kW that do not increase the plate-out effects due to low temperature gradients.
Nickelates have continued to surprise since their unconventional superconductivity was discovered. Recently, the layered nickelate La 5 Ni 3 O 11 with hybrid single-layer and bilayer stacking showed superconductivity under high pressure. This compound combines features of single-layer La 2 NiO 4 and bilayer La 3 Ni 2 O 7 , but its pairing mechanism remains to be understood. Motivated by this finding, here we report a comprehensive theoretical study of this system. Our density functional theory calculations reveal that the undistorted P4/mmm phase without pressure is unstable due to three distortion modes. As pressure increases, these modes are suppressed, leading to the high-symmetry P4/mmm phase without NiO 6 octahedron tilting. Moreover, the “charge transfer” between the single-layer and bilayer sublattices was observed, leading to hole doping in the single-layer blocks. Our random-phase approximation calculations indicate a leading 𝑑 𝑥 2 −𝑦 2 -wave pairing state that arises from spin-fluctuation scattering between Fermi surface states mainly originating from the single-layer blocks and additional weaker contributions from the bilayer blocks. These spin fluctuations could be detected by inelastic neutron scattering as a strong peak at 𝐪 = (𝜋,𝜋). Our findings distinguish La 5 Ni 3 O 11 from other nickelate superconductors discovered so far and the high-𝑇 𝑐 cuprates. We also discuss both similarities and differences between La 5 Ni 3 O 11 and other hybrid stacking nickelates.
Cathode active material is the most valuable component of spent lithium‐ion batteries, accounting for ≈30% of their overall value. Direct recycling of cathode materials involves recovering, regenerating, and reusing them without breaking down their chemical structure. This approach maximizes the added value of the cathode compound and reduces manufacturing costs by avoiding the need for virgin material production. However, one key challenge in scaling direct recycling from lab to industry is the requirement for highly purified cathode materials, contrasting with the low purity of black mass generated from battery shredding. No efficient separation process currently exists to isolate different lithium‐nickel‐manganese‐cobalt oxides (NMCs) from each other. Thus, direct recycling technologies that can operate with mixtures of multiple NMC stoichiometries will be best‐suited for industrial adoption. This study explores the direct recycling of NMC mixtures into NMC 622 using a “reciprocal ternary molten salts (RTMS)” system. Ionothermal relithiation and upcycling within the RTMS system successfully restore the layered structure, lithium content, and electrochemical performance of degraded NMCs, yielding results comparable to pristine NMC 622 (P‐NMC 622).
Recently, a new class of magnetic phenomenon, called altermagnetism, is proposed where the underlying spin configuration resembles antiferromagnetic structure, but the system violates PT (PT: Parity times Time reversal) symmetry due to the alternation of crystalline symmetry across magnetic ions. Although the original idea is proposed for the collinear spin structure, a recent report by Cheong et al. has suggested that antiferromagnetic materials with non-collinear spin structure and local alternation of crystalline arrangement can also manifest altermagnetism. Besides breaking the PT symmetry, altermagnetic compounds are also expected to exhibit anomalous Hall effects of odd orders. Here, possible candidates are discussed in this regard. One example is nickel monosilicide, which is recently shown to exhibit high temperature antiferromagnetism with non-collinear spin structure. It fulfills both criteria of breaking the PT symmetry and manifesting nonlinear anomalous Hall effect. In addition to NiSi, other potential antiferromagnetic materials are also discussed with non-collinear spin configuration for the exploration of altermagnetic states.