Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

CaloScore v2: single-shot calorimeter shower simulation with diffusion models

Diffusion generative models are promising alternatives for fast surrogate models, producing high-fidelity physics simulations. However, the generation time often requires an expensive denoising process with hundreds of function evaluations, restricting the current applicability of these models in a realistic setting. In this work, we report updates on the CaloScorearchitecture, detailing the changes in the diffusion process, which produces higher quality samples, and the use of progressive distillation, resulting in a diffusion model capable of generating new samples with a single function evaluation. Here we demonstrate these improvements using the Calorimeter Simulation Challenge 2022 dataset.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

DiffESM: Conditional Emulation of Temperature and Precipitation in Earth System Models With 3D Diffusion Models

Earth system models (ESMs) are essential for understanding the interaction between human activities and the Earth's climate. However, the computational demands of ESMs often limit the number of simulations that can be run, hindering the robust analysis of risks associated with extreme weather events. While low-cost climate emulators have emerged as an alternative to emulate ESMs and enable rapid analysis of future climate, many of these emulators only provide output on at most a monthly frequency. This temporal resolution is insufficient for analyzing events that require daily characterization, such as heat waves or heavy precipitation. We propose using diffusion models, a class of generative deep learning models, to effectively downscale ESM output from a monthly to a daily frequency. Trained on a handful of ESM realizations, reflecting a wide range of radiative forcings, our DiffESM model takes monthly mean precipitation or temperature as input, and is capable of producing daily values with statistical characteristics close to ESM output. Combined with a low-cost emulator providing monthly means, this approach requires only a small fraction of the computational resources needed to run a large ensemble. We evaluate model behavior using a number of extreme metrics, showing that DiffESM closely matches the spatio-temporal behavior of the ESM output it emulates in terms of the frequency and spatial characteristics of phenomena such as heat waves, dry spells, or rainfall intensity.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Modeling diffusion and types I-V sorption of water vapor in heterogeneous systems

Here, a sorption and diffusion model is developed using a mobile-immobile decomposition of the vapor concentration. Henry’s mode represents the mobile species which diffuses through the solid, while Langmuir and pooling modes represent possible immobilization processes that cause nonlinearities in sorption capacity. The model can simulate the five classical sorption types and can incorporate additional dynamics compared to models based on thermodynamic equilibrium. Additionally, the framework allows for discontinuities in material properties encountered in multi-material systems. The resulting non-linear coupled equations are solved by employing a finite element method to discretize in space, and a backward Euler method to discretize in time. The discretized system of equations is solved via a Newton-type iteration scheme at each time-step. Four different materials are parameterized for the model, which are then used in examples to demonstrate the model’s ability to capture complex sorption processes in multi-material systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Metal oxide candidates for thermochemical water splitting obtained with a generative diffusion model

Generative diffusion models (DMs) for inorganic crystalline materials are being actively investigated for their potential to expand the chemical and structural design spaces for known functional materials. Generative candidates are particularly useful for applications where few functional, let alone commercially viable, materials currently exist, such as metal oxides for thermochemical water-splitting, which have strict requirements for defect thermodynamics and host stability. Here, we critically examine generated metal oxides from the M ATTER G EN DM conditioned on select chemical systems for thermochemical water splitting applications. Perhaps most notably, we find that M ATTER G EN predicts a novel, thermodynamically stable, quinary metal oxide, Ba 2 SrInFeO 6 , although this compound represents an ordered and layered substitution within the same A 3 B 2 O 6 structural prototype as its two ternary end members. Detailed density functional theory calculations and spin configuration sampling for this material and its possible decomposition products—beyond what existed in M ATTER G EN training data—are required to quantitatively validate hull energy predictions and conclusions of stability. Furthermore, the material exhibits oxygen defect formation energies appropriate for thermochemical water splitting, warranting targeted investigation in an experimental validation campaign, along with other future M ATTER G EN candidates in this application space.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Modeling diffusion and depletion in high-aspect-ratio atomic layer deposition processes: Process parameters and manufacturing impacts

Atomic layer deposition (ALD) is a powerful technique for modifying the surface chemistry and properties of substrates with complex and nonplanar topologies. However, achieving uniform and conformal deposition on ultrahigh-aspect-ratio substrates remains challenging, typically requiring large quantities of precursors and long exposure times. Furthermore, process optimization is often performed empirically and involves substantial trial and error. In this work, we perform a combined experimental and computational study of ALD Al 2 O 3 infiltration into silica aerogel monoliths (aspect ratio >10 5 ). A reaction-diffusion model is used to explore the effects of key processing parameters, namely, exposure time per dose, precursor source temperature, number of aerogels in the reactor, and reactor volume. The model is based on quasi-static mode ALD, where the dosed precursor is held in the chamber for a fixed period of time before purging. We analyze the trade-offs between process throughput and precursor utilization for each of these parameters. Furthermore, we investigate the co-optimization and interactions between multiple process parameters, demonstrating the potential for further improvements. Furthermore, this physics-based model can be used to identify a set of process parameters for high-aspect-ratio ALD that meet specific manufacturing objective functions, including throughput, cost, and sustainability.

Aerogel↗
DOE OSTI2015

Hybrid approaches for multiple-species stochastic reaction–diffusion models

Reaction–diffusion models are used to describe systems in fields as diverse as physics, chemistry, ecology and biology. The fundamental quantities in such models are individual entities such as atoms and molecules, bacteria, cells or animals, which move and/or react in a stochastic manner. If the number of entities is large, accounting for each individual is inefficient, and often partial differential equation (PDE) models are used in which the stochastic behaviour of individuals is replaced by a description of the averaged, or mean behaviour of the system. In some situations the number of individuals is large in certain regions and small in others. In such cases, a stochastic model may be inefficient in one region, and a PDE model inaccurate in another. To overcome this problem, we develop a scheme which couples a stochastic reaction–diffusion system in one part of the domain with its mean field analogue, i.e. a discretised PDE model, in the other part of the domain. The interface in between the two domains occupies exactly one lattice site and is chosen such that the mean field description is still accurate there. In this way errors due to the flux between the domains are small. Our scheme can account for multiple dynamic interfaces separating multiple stochastic and deterministic domains, and the coupling between the domains conserves the total number of particles. The method preserves stochastic features such as extinction not observable in the mean field description, and is significantly faster to simulate on a computer than the pure stochastic model. - Highlights: • A novel hybrid stochastic/deterministic reaction–diffusion simulation method is given. • Can massively speed up stochastic simulations while preserving stochastic effects. • Can handle multiple reacting species. • Can handle moving boundaries.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

On the Importance of Using Event-Specific Wave Diffusion Rates in Modeling Diffuse Electron Precipitation

A few to tens of keV electron precipitation that carries substantial energy source down to the upper atmosphere to create aurora is manifested as an important magnetosphere-ionosphere coupling process. The precipitation is usually caused by scattering processes associated with plasma waves in the magnetosphere. The scattering process is often quantified by wave diffusion rates that indicate how fast an electron is scattered. Global models commonly use diffusion coefficients that are derived from statistical wave models. However, due to the statistical nature, many localized, transient features could be smeared out. In this study, we investigate electron precipitation using event-specific diffusion coefficients that are obtained based on simultaneous in-situ measured/inferred, rather than statistical, chorus wave dynamics. We find that the application of the event-specific diffusion coefficients associated with a more dynamic and intense chorus wave model leads more electrons, particularly at several to tens of keV in the dawn-to-noon sector at L > 3, to precipitate than using statistical coefficients. Here, the new simulation roughly captures both the intensity and variability of the precipitating flux as detected by the NOAA/POES satellites. Ionospheric electron density in the lower E region (100–120 km) observed by the mid-latitude Millstone Hill radar is also much better reproduced, while the case using statistical diffusion coefficients underestimates the ionization rate. This study implies the importance of using event-specific diffusion rates in simulating the diffuse electron precipitation and understanding the magnetosphere-ionosphere coupling.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2014

A reduced multicomponent diffusion model

Here, the diffusion models for multicomponent mixtures are investigated in planar premixed flames, counterflow diffusion flames, and ignition of droplet flames. Discernable discrepancies were observed in the simulated flames with the mixture-averaged and multicomponent diffusion models, respectively, while the computational cost of the multicomponent model is significantly higher than that of the mixture-averaged model. A systematic strategy is proposed to reduce the cost of the multicomponent diffusion model by accurately accounting for the species whose diffusivity is important to the global responses of the combustion systems, and approximating those of less importance. The important species in the reduced model are identified with sensitivity analysis, and are found to be typically among those in high concentrations with exception of a few radicals, e.g. H and OH, that are known to participate in critical reactions. The reduced model is validated in simulating the propagation of planar premixed flames, extinction of counterflow non-premixed flames and ignition of droplet flames. The reduced model was shown to feature similar accuracy to that of the multicomponent model while the computational cost was reduced by a factor of approximately 5 for an n -heptane mechanism with 88 species.

42 ENGINEERING↗
DOE OSTI2015

Revisited reaction-diffusion model of thermal desorption spectroscopy experiments on hydrogen retention in material

Desorption phase of thermal desorption spectroscopy (TDS) experiments performed on tungsten samples exposed to flux of hydrogen isotopes in fusion relevant conditions is analyzed using a reaction-diffusion model describing hydrogen retention in material bulk. Two regimes of hydrogen desorption are identified depending on whether hydrogen trapping rate is faster than hydrogen diffusion rate in material during TDS experiments. In both regimes, a majority of hydrogen released from material defects is immediately outgassed instead of diffusing deeply in material bulk when the evolution of hydrogen concentration in material is quasi-static, which is the case during TDS experiments performed with tungsten samples exposed to flux of hydrogen isotopes in fusion related conditions. In this context, analytical expressions of the hydrogen outgassing flux as a function of the material temperature are obtained with sufficient accuracy to describe main features of thermal desorption spectra (TDSP). These expressions are then used to highlight how characteristic temperatures of TDSP depend on hydrogen retention parameters, such as trap concentration or activation energy of detrapping processes. The use of Arrhenius plots to characterize retention processes is then revisited when hydrogen trapping takes place during TDS experiments. Retention processes are also characterized using the shape of desorption peaks in TDSP, and it is shown that diffusion of hydrogen in material during TDS experiment can induce long desorption tails visible aside desorption peaks at high temperature in TDSP. These desorption tails can be used to estimate activation energy of diffusion of hydrogen in material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2016

Measuring and modeling diffuse scattering in protein X-ray crystallography

X-ray diffraction has the potential to provide rich information about the structural dynamics of macromolecules. To realize this potential, both Bragg scattering, which is currently used to derive macromolecular structures, and diffuse scattering, which reports on correlations in charge density variations, must be measured. Until now, measurement of diffuse scattering from protein crystals has been scarce because of the extra effort of collecting diffuse data. Here, we present 3D measurements of diffuse intensity collected from crystals of the enzymes cyclophilin A and trypsin. The measurements were obtained from the same X-ray diffraction images as the Bragg data, using best practices for standard data collection. To model the underlying dynamics in a practical way that could be used during structure refinement, we tested translation–libration–screw (TLS), liquid-like motions (LLM), and coarse-grained normal-modes (NM) models of protein motions. The LLM model provides a global picture of motions and was refined against the diffuse data, whereas the TLS and NM models provide more detailed and distinct descriptions of atom displacements, and only used information from the Bragg data. Whereas different TLS groupings yielded similar Bragg intensities, they yielded different diffuse intensities, none of which agreed well with the data. In contrast, both the LLM and NM models agreed substantially with the diffuse data. In conclusion, these results demonstrate a realistic path to increase the number of diffuse datasets available to the wider biosciences community and indicate that dynamics-inspired NM structural models can simultaneously agree with both Bragg and diffuse scattering.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2026

Development of physics-consistent conditional diffusion model to overcome data scarcity in critical heat flux

Deep generative modeling provides a powerful pathway to overcome data scarcity in energy-related applications where experimental data are often limited. By learning the underlying probability distribution of the training dataset, deep generative models, such as the diffusion model, can generate high-fidelity synthetic samples that statistically resemble the training data. Such synthetic data generation can significantly enrich the size and diversity of the available training data, and more importantly, improve the robustness of downstream machine learning models in predictive tasks. The objective of this paper is to investigate the effectiveness of diffusion models for overcoming data scarcity in nuclear energy applications. By leveraging a public dataset on critical heat flux which covers a wide range of commercial nuclear reactor operational conditions, we developed a diffusion model that can generate an arbitrary amount of synthetic samples. Since a vanilla diffusion model can only generate samples randomly, we also developed a conditional diffusion model capable of generating targeted critical heat flux data under user-specified thermal-hydraulic conditions. The performance of the diffusion model was evaluated based on its ability to capture empirical feature distributions and pair-wise correlations, as well as to maintain physical consistency. The results showed that both the diffusion model and conditional diffusion model can successfully generate realistic and physics-consistent critical heat flux data. Furthermore, uncertainty quantification results demonstrate that the conditional diffusion model is highly effective in augmenting critical heat flux data while maintaining acceptable levels of uncertainty.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2014

Incorporating photon recycling into the analytical drift-diffusion model of high efficiency solar cells

The analytical drift-diffusion formalism is able to accurately simulate a wide range of solar cell architectures and was recently extended to include those with back surface reflectors. However, as solar cells approach the limits of material quality, photon recycling effects become increasingly important in predicting the behavior of these cells. In particular, the minority carrier diffusion length is significantly affected by the photon recycling, with consequences for the solar cell performance. In this paper, we outline an approach to account for photon recycling in the analytical Hovel model and compare analytical model predictions to GaAs-based experimental devices operating close to the fundamental efficiency limit.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2026

FunDiff: diffusion models over function spaces for physics-informed generative modeling

Recent advances in generative modeling-particularly diffusion models and flow matching-have been widely used for synthesizing discrete data such as images and videos. However, adapting these models to physical applications remains challenging, as the quantities of interest are continuous functions governed by complex physical laws. To address this, we introduce FunDiff, an efficient and robust framework for generative modeling in function spaces. FunDiff combines a latent diffusion process with a function autoencoder architecture to handle input functions with varying discretizations, generates continuous functions that can be evaluated at arbitrary locations, and seamlessly incorporate physical priors. These priors are enforced through architectural constraints or physics-informed loss functions, ensuring that generated samples satisfy fundamental physical laws. We theoretically establish minimax optimality guarantees for density estimation in function spaces, demonstrating that diffusion-based estimators achieve optimal convergence rates under suitable regularity conditions. We further demonstrate the practical effectiveness of FunDiff across diverse applications in fluid dynamics and solid mechanics. Empirical results indicate that our method can generate physically consistent samples with high fidelity to the target distribution, and exhibit robustness to noisy and low-resolution data.

Wang, Sifan [Yale University, New Haven, CT (Unite↗
NASA NTRS1978

A comparative study of tropospheric ground cloud diffusion models

Calculated values obtained from several diffusion models are compared with field measurements. The diffusion models that are examined include: NASA/MSFC multilayer diffusion models, the meteorological effluent transport simulation model, the TREATS model, the atmsopheric diffusion particle in cell model, and a model for diffusion in shear flow (DISF). The atmospheric turbulence in the PBL turbulent wind field above and below 150 m is calculated. Concentrations calculated from the DISF model are found to correlate, in general, quite well with flight measurements.

Hwang, B.↗