SEARCH · Engineering Papers
Results for “ADI”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
WASP-117 b: An Eccentric Hot Saturn as a Future Complex Chemistry Laboratory
We present spectral analysis of the transiting Saturn-mass planet WASP-117 b, observed with the G141 grism of the Hubble Space Telescope's (HST) Wide Field Camera 3. We reduce and fit the extracted spectrum from the raw transmission data using the open-source software Iraclis before performing a fully Bayesian retrieval using the publicly available analysis suite TauREx 3.0. We detect water vapor alongside a layer of fully opaque cloud, retrieving a terminator temperature of T{sub term}=833{sub -156}{sup +260} K. In order to quantify the statistical significance of this detection, we employ the atmospheric detectability index (ADI), deriving a value of ADI = 2.30, which provides positive but not strong evidence against the flat-line model. Due to the eccentric orbit of WASP-117 b, it is likely that chemical and mixing timescales oscillate throughout orbit due to the changing temperature, possibly allowing warmer chemistry to remain visible as the planet begins transit, despite the proximity of its point of ingress to apastron. We present simulated spectra of the planet as would be observed by the future space missions such as the Atmospheric Remote-sensing Infrared Exoplanet Large-survey and the James Webb Space Telescope and show that, despite not being able to probe such chemistry with current HST data, these observatories should make it possible in the not too distant future.
Imaging Wavepackets in Real-Space & Disentangling Ultrafast Solvation Dynamics with High-Energy Ultrafast X-ray Scattering
The microscopic information of solute and solute-solvent motions can be measured using ultrafast diffuse x-ray scattering, and compared to molecular dynamics simulations, as demonstrated in studies of solvated molecular systems done in X-ray free-electron lasers. However, for the typical photon energies used in these experiments, the photon momentum transfer range was limited to lower Q values where the signals arising from different parts of the studied system overlap significantly. Recently, this limitation was greatly alleviated by extending the photon energy at the Linac Coherent Light-Source (LCLS), significantly increasing the accessible momentum transfer range. This improvement is transformative for ultrafast diffuse x-ray scattering measurements, enabling for the first time to disentangle the solute scattering difference signal, that persists to higher Q values, from the bulk solvent and solute-solvent cross-terms difference signals. In addition, it enhances the prediction ability of modeling and simulation methods such as the hybrid QM/MM approach. The extended Q range also opens the way to resolve in real-space details regarding coherent wavepackets motions beyond their center-of-mass positions. Here, we present the first results on high-energy (18keV) diffuse x-ray scattering in solution, demonstrating high fidelity time-resolved scattering and analysis of the photoexcited model photocatalysts PtPOP ([Pt2(POP)4]4-), and IrDimen ([Ir2(dimen)4]2+) in several solvents. These complexes provide ideal systems for demonstrating the ability of high-Q ultrafast scattering and QM/MM simulations to decompose ultrafast solvation dynamics into specific changes in the solute-solvent pair distribution function with a particular focus on how electronically excited states change the interaction between the solvent and photo-catalytically active metal sites. We introduce an approach to further utilize the high-energy capability and demonstrate a single-shot ultra-wide-angle X-ray Scattering modality using two perpendicular detectors, spanning a scattering angle range of more than 100 degrees, allowing to extend the accessible momentum transfer range up to Q~14 Å-1. We develop a model-free method to invert the x-ray scattering signals and enable the recovery of multiple pair-density motions that happen simultaneously, allowing us to directly measure in real-space nuclear wavepacket motions. . [1] Natan, Adi. "Real-Space Inversion and Super-Resolution of Ultrafast X-ray Scattering using Natural Scattering Kernels." arXiv preprint arXiv:2107.05576 (2021)
Optical and mass-spectral characterization of mixed-gas flowing atmospheric-pressure afterglow sources
Plasma-based ambient desorption/ionization (ADI) sources for mass spectrometry (MS) often use helium as the primary discharge gas due to the large reaction cross section of excited helium species with atmospheric gases, which ultimately leads to efficient reagent-ion formation. However, some studies have shown that mixed-gas plasmas provide unique advantages. For instance, our group showed that a helium-oxygen flowing atmospheric-pressure afterglow (He:O 2 -FAPA) source yielded enhanced ion signals for small polar analytes, but compounds with aromatic rings underwent chemical modification to produce pyrylium species. Here, it is shown that the addition of H 2 to the helium FAPA gas significantly decreased the reagent-ion signals, but analyte-ion signal was not affected to the same degree. In addition, mass spectra obtained with He:H 2 -FAPA were chemically cleaner with fewer ions stemming from analyte species and produced less oxidation of analytes. Addition of nitrogen increased the abundance of negative reagent ions (e.g., NO 2 - and NO 3 - ) which led to enhanced ion signal for RDX. To better understand these unique advantages of a mixed-gas FAPA, the impact of molecular-gas (O 2 , N 2 , or H 2 ) addition on the optical-emission spectra from the discharge was also measured. Spatially resolved emission was obtained from the anode- and negative-glow regions. In general, addition of small fractions (~0.1%) of molecular gases decreased helium and OH emission intensities. Atomic oxygen and hydrogen emission increased with the addition of O 2 and H 2 , respectively. Furthermore, emission characteristics of N 2 , N 2 + , and NO with respect to molecular gas composition on He-FAPA were measured. Finally, fundamental plasma parameters, such as OH rotational temperature (T rot ), were also calculated for these mixed-gas systems.
CTSA MHRI Datasets
Oak Ridge National Laboratory (ORNL) has collaborated with MedStar Health Research Institute (MHRI) to develop, test, and validate health outcomes using electronic health records (EHRs) from hospitals associated with participating Clinical and Translational Science Awards (CTSA). MHRI, the research organization of MedStar Health (MSH), has a history of initiating projects, both in the laboratory and in the field, that serve the needs of medically underserved and disenfranchised groups. In this document, the ORNL team is providing data curation documentation for the following datasets, which are publicly available: 1. Area Deprivation Index (ADI) 2015 block group; 2. Child Opportunity Index 2015 tract; 3. Low food access 2017 block group; 4. Neighborhood deprivation index 2017 tract; 5. Social Capital Index 2014 county; and, 6. Social Vulnerability Index 2014 tract.
CACTI Radar b1 Processing: Corrections, Calibrations, and Processing Report
The U.S. Department of Energy’s (DOE) Atmospheric Radiation Measurement (ARM) user facility deployed a large number of instruments to a region nearby the Sierra de Córdobas mountains in Argentina as part of the Cloud, Aerosol, and Complex Terrain Interactions (CACTI) field campaign (1). During this campaign, four radars were installed at a site outside of Villa Yacanto as shown in Figure 1. As part of a post-campaign effort to improve the usability of these data, a significant activity was undertaken towards the calibration, correction, and improvement of the data quality of these radar datastreams. This process in ARM nomenclature is referred to as generating a “b1” datastream. While these “b1” standards may imply different corrections or standards for various ARM instruments, for radars it refers to a datastream that has been calibrated (and cross-calibrated), including a serious effort to deliver the highest-quality (well-characterized) data possible. This report details (i) the status/quality of the original “a1” (raw) data, (ii) the corrections and calibrations that are applied to generate these b1 datastreams, (iii) the details of the applied algorithms and how radar offset/calibration numbers were determined for the eventual corrections, and (iv) the new and flexible plug-in-based processing system designed during CACTI for radar b1 activities (current, future) that interfaces with ARM’s Data Integrator (ADI) and high-performance computing (HPC) system.
Monolithic Integration of Lateral HV Power MOSFET with LV CMOS for SiC Power IC Technology
This paper reports the design and process flow for monolithic integration of lateral high voltage (HV) power MOSFET with low voltage (LV) CMOS circuits for SiC Power IC technology. The reported devices and circuits are fabricated on a N-/N+ 4H-SiC substrate at 150mm, production grade- Analog Devices Inc. (ADI) Hillview fabrication facility located in San Jose. Here, the static performance characteristics of HV NMOS and LV CMOS are reported. For future high temperature applications, the static performances are fully characterized and are reported up to 200oC. Finally, to validate the fabricated CMOS, a 5-stage ring oscillator is also demonstrated.
microbasekaplus.c1
This microbasekaplus datastream is produced by re-writed micorbaseka vap (microbasekaplus) in python under ADI framewrok, and added uncertainties for the microphysics. The original Microbase VAP was developed in 2002. The primary purpose of producing this VAP was to provide the required microphysical values for input to the Broad Band Heating Rate Profiles (BBHRP) VAP in order to generate estimations of radiative heating rates. It served the Radiatively Important Parameters Best Estimate (RIBPE) VAP in the capacity of providing baseline cloud microphysical values as input. Microbase produces cloud microphysical properties based on cloud radar measurements taken at all fixed ARM sites.
Mutually Reinforced Polymer–Graphene Bilayer Membranes for Energy‐Efficient Acoustic Transduction
Abstract Graphene holds promise for thin, ultralightweight, and high‐performance nanoelectromechanical transducers. However, graphene‐only devices are limited in size due to fatigue and fracture of suspended graphene membranes. Here, a lightweight, flexible, transparent, and conductive bilayer composite of polyetherimide and single‐layer graphene is prepared and suspended on the centimeter scale with an unprecedentedly high aspect ratio of 10 5 . The coupling of the two components leads to mutual reinforcement and creates an ultrastrong membrane that supports 30 000 times its own weight. Upon electromechanical actuation, the membrane pushes a massive amount of air and generates high‐quality acoustic sound. The energy efficiency is ≈ 10–100 times better than state‐of‐the‐art electrodynamic speakers. The bilayer membrane's combined properties of electrical conductivity, mechanical strength, optical transparency, thermal stability, and chemical resistance will promote applications in electronics, mechanics, and optics.
Controlled Formation of Conduction Channels in Memristive Devices Observed by X–ray Multimodal Imaging
Neuromorphic computing provides a means for achieving faster and more energy efficient computations than conventional digital computers for artificial intelligence (AI). However, its current accuracy is generally less than the dominant software-based AI. The key to improving accuracy is to reduce the intrinsic randomness of memristive devices, emulating synapses in the brain for neuromorphic computing. Here using a planar device as a model system, the controlled formation of conduction channels is achieved with high oxygen vacancy concentrations through the design of sharp protrusions in the electrode gap, as observed by X-ray multimodal imaging of both oxygen stoichiometry and crystallinity. Classical molecular dynamics simulations confirm that the controlled formation of conduction channels arises from confinement of the electric field, yielding a reproducible spatial distribution of oxygen vacancies across switching cycles. Furthermore, this work demonstrates an effective route to control the otherwise random electroforming process by electrode design, facilitating the development of more accurate memristive devices for neuromorphic computing.
High Thermoelectric Performance through Crystal Symmetry Enhancement in Triply Doped Diamondoid Compound Cu 2 SnSe 3
The presence of high crystallographic symmetry and nanoscale defects are favorable for thermoelectrics. With proper electronic structures, a highly symmetric crystal tends to possess multiple carrier channels and promote electrical conductivity without sacrificing Seebeck coefficient. In addition, nanoscale defects can effectively scatter acoustic phonons to suppress thermal conductivity. Here, we report that the triple doping of Cu 2 SnSe 3 leads to a high ZT value of 1.6 at 823 K for Cu 1.85 Ag 0.15 (Sn 0.88 Ga 0.1 Na 0.02 )Se 3 , and a decent average ZT (ZT ave ) value of 0.7 is also achieved for Cu 1.85 Ag 0.15 (Sn 0.93 Mg 0.06 Na 0.01 )Se 3 from 475 to 823 K. Our study reveals: (1) Ag doping on Cu sites generates numerous point defects and greatly decreases lattice thermal conductivity. (2) Doping Mg or Ga converts the monoclinic Cu 2 SnSe 3 into a cubic structure. This symmetry enhancing leads to increase in the effective mass from 0.8 m e to 2.6 m e (m e , free electron mass) and the power factor from 4.3 μW/cm –1 K –2 for Cu 2 SnSe 3 to 11.6 μW/cm –1 K –2 . (3) Na doping creates dense dislocation arrays and nanoprecipitates, which strengthens the phonon scattering. (4) Pair distribution function analysis shows localized symmetry breakdwon in the cubic Cu 1.85 Ag 0.15 (Sn 0.88 Ga 0.1 Na 0.02 )Se 3 . Furthermore, the present work provides a standpoint to design promising thermoelectric materials by synergistically manipulating crystal symmetry and nanoscale defects.
Incidence of cancer among U.S. combat casualties: a DoD Trauma Registry study
Not Available
Intrinsic and environmental drivers of pairwise cohesion in wild Canis social groups
Animals within social groups respond to costs and benefits of sociality by adjusting the proportion of time they spend in close proximity to other individuals in the group (cohesion). Variation in cohesion between individuals, in turn, shapes important group-level processes such as subgroup formation and fission–fusion dynamics. Although critical to animal sociality, a comprehensive understanding of the factors influencing cohesion remains a gap in our knowledge of cooperative behavior in animals. We tracked 574 individuals from six species within the genus Canis in 15 countries on four continents with GPS telemetry to estimate the time that pairs of individuals within social groups spent in close proximity and test hypotheses regarding drivers of cohesion. Pairs of social canids (Canis spp.) varied widely in the proportion of time they spent together (5%–100%) during seasonal monitoring periods relative to both intrinsic characteristics and environmental conditions. The majority of our data came from three species of wolves (gray wolves, eastern wolves, and red wolves) and coyotes. For these species, cohesion within social groups was greatest between breeding pairs and varied seasonally as the nature of cooperative activities changed relative to annual life history patterns. Across species, wolves were more cohesive than coyotes. For wolves, pairs were less cohesive in larger groups, and when suitable, small prey was present reflecting the constraints of food resources and intragroup competition on social associations. Pair cohesion in wolves declined with increased anthropogenic modification of the landscape and greater climatic variability, underscoring challenges for conserving social top predators in a changing world. We show that pairwise cohesion in social groups varies strongly both within and across Canis species, as individuals respond to changing ecological context defined by resources, competition, and anthropogenic disturbance. Our work highlights that cohesion is a highly plastic component of animal sociality that holds significant promise for elucidating ecological and evolutionary mechanisms underlying cooperative behavior.
Bayesian optimization to design a novel x-ray shaping device
In radiation therapy, x-ray dose must be precisely sculpted to the tumor, while simultaneously avoiding surrounding organs at risk. This requires modulation of x-ray intensity in space and/or time. Typically, this is achieved using a multi leaf collimator (MLC) - a complex mechatronic device comprising over one hundred individually powered tungsten ‘leaves’ that move in or out of the radiation field as required. Here, an all-electronic x-ray collimation concept with no moving parts is presented, termed “SPHINX”: Scanning Pencil-beam High-speed Intensity-modulated X-ray source. SPHINX utilizes a spatially distributed bremsstrahlung target and collimator array in conjunction with magnetic scanning of a high energy electron beam to generate a plurality of small x-ray “beamlets.” A simulation framework was developed in Topas Monte Carlo incorporating a phase space electron source, transport through user defined magnetic fields, bremsstrahlung x-ray production, transport through a SPHINX collimator, and dose in water. This framework was completely parametric, meaning a simulation could be built and run for any supplied geometric parameters. This functionality was coupled with Bayesian optimization to find the best parameter set based on an objective function which included terms to maximize dose rate for a user defined beamlet width while constraining inter-channel cross talk and electron contamination. Designs for beamlet widths of 5, 7, and 10 mm 2 were generated. Each optimization was run for 300 iterations and took approximately 40 h on a 24-core computer. For the optimized 7-mm model, a simulation of all beamlets in water was carried out including a linear scanning magnet calibration simulation. Finally, a back-of-envelope dose rate formalism was developed and used to estimate dose rate under various conditions. The optimized 5–, 7–, and 10-mm models had beamlet widths of 5.1 , 7.2 , and 10.1 mm 2 and dose rates of 3574, 6351, and 10 015 Gy/C, respectively. The reduction in dose rate for smaller beamlet widths is a result of both increased collimation and source occlusion. For the simulation of all beamlets in water, the scanning magnet calibration reduced the offset between the collimator channels and beam centroids from 2.9 ±1.9 mm to 0.01 ±0.03 mm. A slight reduction in dose rate of approximately 2% per degree of scanning angle was observed. Based on a back-of-envelope dose rate formalism, SPHINX in conjunction with next-generation linear accelerators has the potential to achieve substantially higher dose rates than conventional MLC-based delivery, with delivery of an intensity modulated 100 x 100 mm 2 field achievable in 0.9 to 10.6 s depending on the beamlet widths used. Bayesian optimization was coupled with Monte Carlo modeling to generate SPHINX geometries for various beamlet widths. A complete Monte Carlo simulation for one of these designs was developed, including electron beam transport of all beamlets through scanning magnets, x-ray production and collimation, and dose in water. These results demonstrate that SPHINX is a promising candidate for sculpting radiation dose with no moving parts, and has the potential to vastly improve both the speed and robustness of radiotherapy delivery. A multi-beam SPHINX system may be a candidate for delivering magavoltage FLASH RT in humans.
Splitting amplitudes at N 3 LO in QCD
In the limit where partons become collinear to each other, scattering amplitudes factorize into a product of universal, process-independent building blocks and scattering amplitudes involving fewer partons. We compute these universal building blocks — known as splitting amplitudes — for two collinear QCD partons up to third loop order in QCD. Our results describe arbitrary time-like splitting processes. Due to the violation of strict collinear factorization in space-like splitting processes, we specifically present space-like splitting amplitudes for three-parton QCD scattering amplitudes at third loop order. To achieve our results, we perform a collinear expansion of three-loop scattering amplitudes using a new expansion-by-subgraph technology, which is based on the method of regions.
Single-soft emissions for amplitudes with two colored particles at three loops
We compute the three-loop correction to the universal single-soft emission current for the case of scattering amplitudes with two additional color-charged partons. We present results valid for QCD and $\mathcal{N}$ = 4 super-symmetric Yang-Mills theory. To achieve our results we develop a new integrand expansion technique for scattering amplitudes in the presence of soft emissions. Furthermore, we obtain contributions from single final-state parton matrix elements to the Higgs boson and Drell-Yan production cross section at next-to-next-to-next-to-next-to leading order (N 4 LO) in perturbative QCD in the threshold limit.
Plant-specific microbial diversity facilitates functional redundancy at the soil-root interface
Abstract Aims Plant-specific microbial diversity reflecting host-microbe coevolution was frequently shown at the structural level but less on the functional scale. We studied the microbiome of three compartments at the soil root interface (root endosphere, rhizosphere, bulk soil) of medicinal plants cultivated under organic management in Egypt. The study aimed to examine the impact of the rhizosphere on microbial community composition and diversity in desert agricultural soil, as well as to identify specific functions associated with the rhizosphere. Methods The microbiome community structure, diversity, and microbial functioning were evaluated through the utilization of 16S rRNA gene amplicon and shotgun metagenome sequencing. Results We found the typical rhizosphere effect and plant-species-specific enrichment of bacterial diversity. The annual plants Calendula officinalis and Matricaria chamomilla ( Asteraceae ) were more similar than the perennial Solanum distichum ( Solanaceae ). Altogether, plant species explained 50.5% of the variation in bacterial community structures in the rhizosphere. Our results indicate a stronger effect of the plant species in terms of modulating bacterial community structures in the rhizosphere than in root endosphere samples. The plant-driven rhizosphere effect could be linked to redundant plant beneficial functions in the microbiome, while enrichment of specific genes related to amino acid ion transport and metabolism, carbohydrate transport and metabolism, defense mechanisms, and secondary metabolites biosynthesis were more specific. Conclusions The study explores the microbiome continuum at the soil-root interface of medicinal plant species, revealing significant bacterial community structure shifts and plant specificity. The study provides insights into the essential microbiome components contributing to rhizosphere functionality.
Structure–activity relationship study of small-molecule inhibitor of Atg12-Atg3 protein–protein interaction
Not Available