Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “critical experiments”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS1989

Critical fluid light scattering

Thermal fluctuations give rise to a host of thermodynamic anomalies near critical points. The background for these phenomena is presented, and an experimental design on STS flight experiment called Zeno is described. The objective is to measure the decay rates of critical density fluctuations in a simple fluid (xenon) very near its liquid-vapor critical point using laser light scattering and photon correlation spectroscopy. Such experiments have been limited on Earth by the presence of gravity, which causes large density gradients in the sample. Fluctuation decay rates in xenon will be measured at least 100 times closer to the critical point than is possible on Earth. This will require taking data as close as 145 micro K to the critical temperature, after locating it to + or - 10 micro K. The minimum mission time of 100 hours will allow a complete range of temperature points to be covered, limited by the thermal response of the sample. An essential part of the apparatus is the thermostat. Its design principles and key features are given together with some observed performance characteristics of a prototype: + or - 20 micro K stability for 18 hours, and one minute programmed step response for steps less than 10 mK.

Gammon, Robert W.↗
DOE OSTI2022

Development of a Direct Neutral Density Diagnostic for Fusion Edge Plasmas

As magnetically confined plasmas progress towards ignition and long pulse experiments, measurement and control of the neutral density in the plasma edge has become a critical issue for stability, formation of transport barriers, and fueling. Recent experiments by our research group have demonstrated that is possible to use two-photon absorption laser induced fluorescence (TA-LIF) to directly measure the density of neutral hydrogen in helicon sources and in the HIT-SI3 spheromak. While those experiments validated key elements of a diagnostic system that would enable similar measurements in tokamak plasmas, they did not fully address the issue of performance optimization in the presence of intense background light at the fluorescence wavelength and they also identified a number of other issues that must be resolved before successful TALIF neutral density measurements in a tokamak are likely to be achieved. Additional specific concerns raised during design reviews with the leadership of the DIII-D tokamak facility included: the minimum detection threshold for this TALIF diagnostic (currently ~ 5 x 10 15 m -3 ) and the rate at which neutral density measurements could be obtained. Improving the system performance to reduce the minimum detection threshold and demonstrating a faster rate of density determination are required to advance this diagnostic to the level where it could be considered for implementation on a major tokamak facility in the USA. The key issues that will be addressed through additional technological development are: validation of a new, chromatic aberration-free, xenon calibration scheme; increasing the output power of the laser; and suppression of background emission at the fluorescence wavelength through optimization of the collection optics and gating of the photomultiplier detector with a goal of obtaining a minimum detection threshold of 5 x 10 14 m -3 . Another key technological development, so far only tested in helicon source experiments, is the validation of Doppler-free TALIF as a means of obtaining higher speed, calibrated, neutral density measurements in tokamak-like conditions at the full cadence of the pulsed TALIF laser. In this work, we propose to complete these technological advancements through installation and testing of our prototype TALIF system on the proto-MPEX experiment at Oak Ridge National Laboratory (ORNL). The proto-MPEX facility will provide plasma conditions similar to the edge plasma of a major tokamak experiment but with pulse lengths and pulse repetition rates ideally suited for extensive development of a TALIF neutral density diagnostic. Measurement of the absolute neutral density in the edge of a magnetically confined plasma is necessary for plasma density control; calculation of charge-exchange power losses; control of plasma-wall interactions; determination of the braking of plasma flow; determination of the fuel mixture in deuterium-tritium plasma; and understanding the dynamics of the divertor region in the plasma edge. In terms of potential impact on the worldwide fusion program, we note that in burning plasma experiments, such as ITER, a 100 mJ/pulse Doppler-free TALIF diagnostic should be capable of directly measuring the deuterium/tritium (D/T) isotope ratio in the outer 0.5 to 1.0 m of the plasma radius. The D/T ratio is a critically important parameter for the control and optimization of burning plasmas. Therefore, development of the diagnostic system proposed here is also relevant to long-term US participation in diagnostic development for large tokamaks.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1997

An Experimental Investigation on the Static Equilibria and Dynamics of Liquid Bridges

A liquid bridge is a volume of liquid held between two or more solid supports. In the case of small disk supports with a sharp edge, the contact line between the bridge and the support disk will be anchored along the edge of the disk. For these cases the solid presents a geometrical singularity and the contact angle is indeterminate within a given range. This dissertation presents research conducted on liquid bridges with anchored contact lines. The three major topics covered are: determining the role of support geometry on static equilibria, liquid bridge dynamical behavior, and forces exerted by a liquid bridge on a support structure. The work was primarily experimental and conducted in a "Plateau tank" that allowed for the simulation of equivalent low-gravity conditions. The main thrust of the experimental work involved the use of a high resolution optical measurement system for imaging the dynamic zone shape, measurement of the static and dynamic contact angles and non-invasive analysis of excited surface modes. The liquid bridge was manipulated by computer controlled linear actuators which allowed precise control over the physical characteristics of the bridge. Experiments have been carried out to locate a bifurcation point along the maximum volume axisymmetric stability margin. Below the critical slenderness the bifurcation from an axisymmetric to a stable nonaxisymmetric configuration is supercritical. However, above this critical slenderness, the bifurcation is subcritical. A series of experiments analyzed the effect on axisymmetric bridge stability by using support disks of different radii, The shape behavior as transition points were approached, as well as the limiting case of a vanishing support radius was investigated. Experiments were performed to determine the resonant frequencies of axisymmetric bridges subject to lateral vibrations. Anomolous results led to a series of experiments to characterize nonlinearities present in the dynamic bridge shape. Finally, an attempt was made to experimentally measure the force exerted by the bridge on the lower support disk. This was done through use of a force balance apparatus. Particular attention was paid to the behavior of the bridge as the minimum volume stability limit was approached.

Resnick, Andrew Howard↗
DOE OSTI2013

Fabrication and Properties of Technetium-Bearing Pyrochlores and Perovskites as Potential Waste Forms - 13222

Technetium-99 (t{sub 1/2}= 2.13x10{sup 5} years) is important from a nuclear waste perspective and is one of the most abundant, long-lived radioisotopes in used nuclear fuel (UNF). As such, it is targeted in UNF separation strategies such as UREX+, for isolation and encapsulation in solid waste forms for storage in a nuclear repository. We report here results regarding the incorporation of Tc-99 into ternary oxides of different structure types: pyrochlore (Nd{sub 2}Tc{sub 2}O{sub 7}), perovskite (SrTcO{sub 3}), and layered perovskite (Sr{sub 2}TcO{sub 4}). The goal was to determine synthesis conditions of these potential waste forms to immobilize Tc-99 as tetravalent technetium and to harvest crystallographic, thermophysical and hydrodynamic data. The objective of this research is to provide fundamental crystallographic and thermophysical data on advanced ceramic Tc-99 waste forms such as pyrochlore, perovskite, and layered perovskite in support of our current efforts on the corrosion of technetium-bearing waste forms. The ceramic Tc-99-bearing waste forms exhibit good crystallinity. The lattice parameters and crystal structures of the technetium host phases could be refined with high accuracies of ±3, ±4, and ±7 fm (10{sup -15} m), for Nd{sub 2}Tc{sub 2}O{sub 7}, SrTcO{sub 3}, and Sr{sub 2}TcO{sub 4}, respectively. The associated refinement residuals (R{sub Wp}) for the patterns are 4.1 %, 4.7 % and 6.7 %, and the refinement residuals for the individual phases (R{sub Bragg}) are 2.0 %, 2.4 % and 3.9 %, respectively. Thermophysical properties of the oxides SrTcO{sub 3}, Sr{sub 2}TcO{sub 4}, and Nd{sub 2}Tc{sub 2}O{sub 7} were analyzed using AC magnetic susceptibility measurements to further harvest information on the critical temperature (T{sub c}) for superconductivity. In our experiments the strontium technetates, SrTcO{sub 3} and Sr{sub 2}TcO{sub 4}, show superconductivity at rather high critical temperatures of T{sub c} = 7.8 K and 7 K, respectively. On the other hand Nd{sub 2}Tc{sub 2}O{sub 7} did not show any changes in magnetic properties above 3 K. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1993

Determination of the dispersion constant in a constrained vapor bubble thermosyphon

The isothermal profiles of the extended meniscus in a quartz cuvette were measured in a gravitational field using an image analyzing interferometer which is based on computer enhanced video microscopy of the naturally occurring interference fringes. The experimental results for heptane and pentane menisci were analyzed using the extended Young-Laplace equation. These isothermal results characterized the interfacial force field in-situ at the start of the heat transfer experiments by quantifying the dispersion constant, which is a function of the liquid-solid system and cleaning procedures. The experimentally obtained values of the disjoining pressure and the dispersion constants were compared to that predicted from the DLP theory and good agreements were obtained. The measurements are critical to the subsequent non-isothermal experiments because one of the major variables in the heat sink capability of the CVBT is the dispersion constant. In all previous studies of micro heat pipes the value of the dispersion constant has been 'guesstimated'. One of the major advantages of the current glass cell is the ability to view the extended meniscus at all times. Experimentally. we find that the extended Young-Laplace equation is an excellent model for the force field at the solid-liquid-vapor interfaces.

Dasgupta, SUNANDO.↗
NASA NTRS1995

Determination of the dispersion constant in a constrained vapor bubble thermosyphon

The isothermal profiles of the extended meniscus in a quartz cuvette were measured in a gravitational field using an image analyzing interferometer which is based on computer enhanced video microscopy of the naturally occurring interference fringes. The experimental results for heptane and pentane menisci were analyzed using the extended Young Laplace Equation. These isothermal results characterized the interfacial force field in-siru at the start of the heat transfer experiments by quantifying the dispersion constant, which is a function of the liquid-solid system and cleaning procedures. The experimentally obtained values of the disjoining pressure and the dispersion constants were compared to that predicted from the DLP theory and good agreements were obtained. The measurements are critical to the subsequent non-isothermal experiments because one of the major variables in the heat sink capability of the Constrained Vapor Bubble Thermosyphon, CVBT, is the dispersion constant. In all previous studies of micro heat pipes the value of the dispersion constant has been 'estimated'. One of the major advantages of the current glass cell is the ability to view the extended meniscus at all times. Experimentally, we find that the extended Young-Laplace Equation is an excellent model for the force field at the solid-liquid-vapor interfaces.

Dasgupta, Sunando↗
NASA NTRS1996

Advancement of Solidification Processing Technology Through Real Time X-Ray Transmission Microscopy: Sample Preparation

Two types of samples were prepared for the real time X-ray transmission microscopy (XTM) characterization. In the first series directional solidification experiments were carried out to evaluate the critical velocity of engulfment of zirconia particles in the Al and Al-Ni eutectic matrix under ground (l-g) conditions. The particle distribution in the samples was recorded on video before and after the samples were directionally solidified. In the second series samples of the above two type of composites were prepared for directional solidification runs to be carried out on the Advanced Gradient Heating Facility (AGHF) aboard the space shuttle during the LMS mission in June 1996. X-ray microscopy proved to be an invaluable tool for characterizing the particle distribution in the metal matrix samples. This kind of analysis helped in determining accurately the critical velocity of engulfment of ceramic particles by the melt interface in the opaque metal matrix composites. The quality of the cast samples with respect to porosity and instrumented thermocouple sheath breakage or shift could be easily viewed and thus helped in selecting samples for the space shuttle experiments. Summarizing the merits of this technique it can be stated that this technique enabled the use of cast metal matrix composite samples since the particle location was known prior to the experiment.

Stefanescu, D. M.↗
DOE OSTI2018

Are vulnerable customers any different than their peers when exposed to critical peak pricing: Evidence from the U.S.

Recent broad-based deployment of Advanced Metering Infrastructure (AMI) enables the opportunity for broader adoption of time-based rates, and the benefits that result have been sizable contributors to making the investments cost effective. However, some stakeholders have raised concerns about the assumptions underlying the benefits assessments in AMI business cases. Such concerns are especially acute for certain subpopulations of residential customers. Low income, elderly and chronically ill (i.e., vulnerable) customers are believed to have less load that can be shifted or reduced to capture bill savings, lack the know-how or wherewithal with which to curtail usage, likely have more limited financial resources which may compel them to avoid high priced periods by reducing electricity for essential usage potentially causing them physical harm, and more generally may be more adversely affected by higher bills, which might possibly result from certain forms of time-based rates. There is very limited existing literature that addresses these questions specifically with regard to vulnerable subpopulations. This paper, based on a larger report, extends the existing empirical literature on the experiences of low-income customers exposed to critical peak pricing, and provides the first glimpses into the experiences of the elderly and those who reported being chronically ill.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2025

Integral Experiment Validation of Hafnium with TEX-HEU and TEX-Hf [Slides]

Lead by Lawrence Livermore National Laboratory under the U.S. Department of Energy's Nuclear Criticality Safety Program. The goal of TEX is to provide integral benchmark experiments than span the entire neutron energy spectrum and incorporate high-priority materials. TEX includes two test bed configurations providing a baseline for comparison to better understand the contribution of additional materials

Highly Enriched Uranium↗
NASA NTRSDate not supplied

Novel insights enabled by combining mouse muscle datasets from the Rodent Research-1 mission

Biological space experiments are often expensive and difficult to conduct. As such, it is critical to maximize the value of the data that is collected during these experiments. One way to do this is to combine multiple–previously separate–datasets. This can increase the number of replicates for the conditions of interest (and hence statistical power), allow new multi-factor questions to be asked, and potentially highlight new patterns that otherwise would not have been identified from single-dataset studies. However, the process of combining datasets introduces noise due to inherent technical variations between experiments. To better understand the insights that can be gained from multi-dataset analyses and the problems that may arise from joining multiple datasets, several mouse muscle RNA-Seq datasets from the Rodent Research-1 mission were first selected. Then, using the R package DESeq2, principal component analysis (PCA) plots and differentially expressed gene (DEG) lists between ground and flight muscle samples were generated for individual datasets and for different pairwise combinations of datasets. Several new DEGs were identified in the combined datasets, and patterns in the PCA plots were affected depending on which datasets were joined. Understanding the results of this work will be critical for future studies that seek to perform multi-dataset analyses.

spaceflight↗
DOE OSTI2015

Nanoporous Materials Can Tune the Critical Point of a Pure Substance

Abstract Molecular simulations and NMR relaxometry experiments demonstrate that pure benzene or xylene confined in isoreticular metal–organic frameworks (IRMOFs) exhibit true vapor–liquid phase equilibria where the effective critical point may be reduced by tuning the structure of the MOF. Our results are consistent with vapor and liquid phases extending over many MOF unit cells. These results are counterintuitive since the MOF pore diameters are approximately the same length scale as the adsorbate molecules. As applications of these materials in catalysis, separations, and gas storage rely on the ability to tune the properties of adsorbed molecules, we anticipate that the ability to systematically control the critical point, thereby preparing spatially inhomogeneous local adsorbate densities, could add a new design tool for MOF applications.

Braun, Efrem↗
DOE OSTI2013

High Energy Physics and Nuclear Physics Network Requirements

The Energy Sciences Network (ESnet) is the primary provider of network connectivity for the U.S. Department of Energy (DOE) Office of Science (SC), the single largest supporter of basic research in the physical sciences in the United States. In support of SC programs, ESnet regularly updates and refreshes its understanding of the networking requirements needed by instruments, facilities, scientists, and science programs that it serves. This focus has helped ESnet to be a highly successful enabler of scientific discovery for over 25 years. In August 2013, ESnet and the DOE SC Offices of High Energy Physics (HEP) and Nuclear Physics (NP) organized a review to characterize the networking requirements of the programs funded by the HEP and NP program offices. Several key findings resulted from the review. Among them: 1. The Large Hadron Collider's ATLAS (A Toroidal LHC Apparatus) and CMS (Compact Muon Solenoid) experiments are adopting remote input/output (I/O) as a core component of their data analysis infrastructure. This will significantly increase their demands on the network from both a reliability perspective and a performance perspective. 2. The Large Hadron Collider (LHC) experiments (particularly ATLAS and CMS) are working to integrate network awareness into the workflow systems that manage the large number of daily analysis jobs (1 million analysis jobs per day for ATLAS), which are an integral part of the experiments. Collaboration with networking organizations such as ESnet, and the consumption of performance data (e.g., from perfSONAR [PERformance Service Oriented Network monitoring Architecture]) are critical to the success of these efforts. 3. The international aspects of HEP and NP collaborations continue to expand. This includes the LHC experiments, the Relativistic Heavy Ion Collider (RHIC) experiments, the Belle II Collaboration, the Large Synoptic Survey Telescope (LSST), and others. The international nature of these collaborations makes them heavily reliant on transoceanic connectivity, which is subject to longer term service disruptions than terrestrial connectivity. The network engineering aspects of undersea connectivity will continue to be a significant part of the planning, deployment, and operation of the data analysis infrastructure for HEP and NP experiments for the foreseeable future. Given their critical dependency on networking services, the experiments have expressed the need for tight integration (both technically and operationally) of the domestic and the transoceanic parts of the network infrastructure that supports the experiments. 4. The datasets associated with simulations continue to increase in size, and the need to move these datasets between analysis centers is placing ever-increasing demands on networks and on data management systems at the supercomputing centers. In addition, there is a need to harmonize cybersecurity practice with the data transfer performance requirements of the science. This report expands on these points, and addresses others as well. The report contains a findings section in addition to the text of the case studies discussed during the review.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Particle size effects in metallic microparticle impact-bonding

In cold spray processing of metals, the critical velocity for particle bonding is dependent on both intrinsic material properties, such as density and (spall) strength, and extrinsic process parameters, such as the powder particle size. Here, we specifically isolate and investigate particle size effects on the critical velocity for bonding through laser- induced single particle impact experiments and finite element simulations. We also present a predictive framework to correlate particle size and critical velocity. We show that an increase in particle size leads to an increase in the temperature of the jet formed at the interface of the particle and the substrate. This increased temperature locally decreases the spall strength of the material which, in turn, decreases the critical velocity for larger particles.

36 MATERIALS SCIENCE↗
NASA NTRSDate not supplied

Emissions Characterization and Smoke Transport of A Prescribed Fire

Under the background of climate change, vast regions of the world will face a hotter and probably drier future that favors ignition and spread of wildfires. This poses additional challenges to the communities who are fighting the ever-larger wildfires. Fire and smoke models are valuable tools to fire managers and decision-makers to mitigate the impact of fires. Existing fire modeling systems bear large uncertainties due to the difficulty in collecting data to characterize fire behavior and smoke transport. More observations are urgently needed for improvement of fire modeling and reduction in model uncertainty. The coordinated prescribed burn experiment, such as the Fire and Smoke Model and Measurement Evaluation Experiment (FSMMEE), will allow the concurrent collection of critical measurements of fuel, fire behavior, smoke, and meteorology to better understand and model fires. In this preliminary investigation, we employed the data from the prescribed burn experiment at Langdon Mountain, Utah, in November 2019, to reconstruct the fire emissions and characterize the smoke transport. The NASA Unified Weather Research and Forecasting Model (NU-WRF) was utilized to assist in identifying the potential pre-fire remote sensing capabilities, such as fuel load, moisture, and fire radiative power, which are helpful to model development and advancement. Along the way, two sets of NU-WRF experiments would be done by applying either a default fire emissions inventory (i.e., NASA’s Quick Fire Emissions Dataset, QFED) or reconstructed fire emissions using the data collected from the prescribed fire. The results would help answer the questions such as “How do reconstructed emissions compare to QFED emissions and their impact on plume transport”.

NU-WRF↗
NASA NTRS1988

Independent Orbiter Assessment (IOA): Assessment of the Orbiter Experiment (OEX) subsystem

The results of the Independent Orbiter Assessment (IOA) of the Failure Modes and Effects Analysis (FMEA) and Critical Items List (CIL) are presented. The IOA effort first completed an analysis of the Orbiter Experiments (OEX) hardware, generating draft failure modes and potential critical items. To preserve independence, this analysis was accomplished without reliance upon the results contained within the NASA FMEA/CIL documentation. The IOA results were then compared to the NASA FMEA/CIL baseline with proposed Post 51-L updates included. A resolution of each discrepancy from the comparison is provided through additional analysis as required. The results of that comparison for the Orbiter OEX hardware are documented. The IOA product for the OEX analysis consisted of 82 failure mode worksheets that resulted in two potential critical items being identified.

Compton, J. M.↗
NASA NTRS1991

Improved silicon nitride for advanced heat engines

The results of a four year program to improve the strength and reliability of injection-molded silicon nitride are summarized. Statistically designed processing experiments were performed to identify and optimize critical processing parameters and compositions. Process improvements were monitored by strength testing at room and elevated temperatures, and microstructural characterization by optical, scanning electron microscopes, and scanning transmission electron microscope. Processing modifications resulted in a 20 percent strength and 72 percent Weibull slope improvement of the baseline material. Additional sintering aids screening and optimization experiments succeeded in developing a new composition (GN-10) capable of 581.2 MPa at 1399 C. A SiC whisker toughened composite using this material as a matrix achieved a room temperature toughness of 6.9 MPa m(exp .5) by the Chevron notched bar technique. Exploratory experiments were conducted on injection molding of turbocharger rotors.

Yeh, Harry C.↗
DOE OSTI2024

Taylor-Couette Flow Modeling (Rev.1)

The Taylor-Couette Flow is a form of viscous flow in which fluid flows between two cylindrical walls with a prescribed rotation. A diagram is shown on the right (Figure 1) where Ω is the rotational velocity, H is the distance between the two cylinders, R is the radius the outer cylinder, r is the radius of the inner cylinder and L is the length of the cylinders. When the rotating inner cylinder reaches a critical velocity, the flow of the liquid becomes unstable and creates vortices in between the layers. In this experiment, the Taylor-Couette cylinders were modeled so that the vortices would be created after reaching a critical velocity. After the initial experiment, the velocity of the inner cylinder was decreased and increased to look at how the results changed.

42 ENGINEERING↗
DOE OSTI2016

Finalizing the {sup 63}Cu and {sup 65}Cu Resonance Evaluations for the ENDF/B-VIII Release

The resolved resonance region evaluation for the only two natural isotopes of copper ({sup 63}Cu and {sup 65}Cu) was carried out at the Oak Ridge National Laboratory (ORNL) in support of the US Department of Energy (DOE) Nuclear Criticality Safety Program (NCSP). The particular interest in the isotope of copper arose because it was linked with poor performance of the Zeus series of integral benchmarks from the International Criticality Safety Benchmark Evaluation Project (ICSBEP). Good agreement between the calculated and experimentally measured values for the ICSBEP benchmarks is essential to the NCSP because the ICSBEP benchmarks are used for validation purposes of criticality safety calculations. The particular set of four Zeus experiments had a highly-enriched uranium core with a thick copper-reflector resulting in a large sensitivity of the criticality of these systems to the cross section of copper in the intermediate energy range. Sobes et al. presented the effect of the newly resolved resonance region evaluations for the two isotopes of copper on the Zeus integral benchmarks, as well as 23 other benchmarks from the ICSBEP during the 2016 ANS Annual Meeting. The results presented in Ref. were calculated with the ENDF/B-VII.1 cross section libraries used for all other materials. However, it is suggested that the resolved resonance region evaluations for the isotopes of copper should not be judged only on their performance in the integral benchmark calculations especially when the ENDF/B-VII.1 cross sections are used for all of the other isotopes. Three reasons are provided for this. First and foremost, a new evaluation is an assessment of the physics of the nucleus of the particular isotope, and the goal of an application agnostic nuclear data evaluation is to improve evaluation by fitting state-of-the art R-Matrix formalism to highly precise experimental cross section measurements. The improved performance in the integral benchmarks should only come as a consequence of the improvement in the physics of the evaluation. Secondly, there is some uncertainty in the nuclear data evaluation of the cross section of all isotopes, so there could be some error in evaluating another isotope used in calculating the integral benchmark experiment. Such an error may have been having a compensating effect, in combination with the previous evaluations for the isotopes of copper. Thirdly, with the two isotopes of copper proposed for inclusion in the upcoming release of the ENDF/B-VIII library, performance of the new resonance evaluation for copper should be evaluated based on the calculation of the integral benchmarks with all of the evaluations proposed for inclusion in the ENDF/B-VIII release. These benchmarking results using the ENDF/B-VIII evaluations as they converge closer to their final form will be presented at the conference. This summary stresses the importance of the physics of the evaluation and reviews some of the steps taken in finalizing a resolved resonance region evaluation. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗