Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fourier Transform”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,765 records · Page 98
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Comparison of modal test methods on the Voyager payload

A comparison of the performance of modern modal data analysis methods on test data from the Voyager Jupiter/Saturn payload is presented. Four different test/data-analysis combinations are compared - multiple-point sine excitation tests, single-point random-excitation tests using two different techniques of manipulating Fourier transform data, and a time-domain method for analyzing random data. Results indicate that all four methods can give comparable results. Of the four, the time-domain approach detects more modes in the test data and, at the same time, shows the greatest promise for reducing the time and cost of modal testing.

Hanks, B. R.↗
NASA NTRS1978

The comparison between the synthetic aperture radar imageries and the surface truth of ocean waves

Ocean waves measured offshore of Marineland, Florida, by the synthetic aperture radar (SAR) are compared with the surface truth data. The Fourier transform of SAR imageries are taken and the corrections of the wave directions and wave lengths due to the relative velocities between SAR and waves are considered. Favorable comparisons are obtained for the peak frequencies, wave directions, and directional distributions. However, the one-dimensional SAR spectra are quite different from the surface truth wave height spectra.

Hsiao, S. V.↗
NASA NTRS1979

The spatial variability of coastal surface water temperature during upwelling

Thermal scanner imagery acquired during a field experiment designed to study an upwelling event in Lake Superior is investigated. Temperature data were measured by the thermal scanner, with a spatial resolution of 7 m. These data were correlated with temperatures measured from boats. One- and two-dimensional Fourier transforms of the data were calculated and temperature variances as a function of wavenumber were plotted. A k-to-the-minus-three dependence of the temperature variance on wavenumber was found in the wavenumber range of 1-25/km. At wavenumbers greater than 25/km, a k-to-the-minus-five-thirds dependence was found.

Scarpace, F. L.↗
NASA NTRS1979

A comparison of WFTA and FFT programs

Bounds on the minimum number of data transfers (i.e., loads and stores) required by WFTA (Winograd Fourier Transform Algorithm) and FFT programs are presented. The analysis is applicable to those general-purpose computers with a small number of general processor registers (e.g., the IBM370, PDP-11, etc.). It is shown that the 1008-point WFTA requires about 21% more data transfers than the 1024-point radix-4 FFT; on the other hand, the 120-point WFTA has about 22% fewer data transfers than the 128-point radix-2 FFT. Finally, comparisons of the 'total' program execution times (multiplications, additions, and data transfers, but not indexing or permutations) are presented.

Nawab, H.↗
NASA NTRS1978

Solid state photochemistry of polycarbonates

The quantum yield of photoFries rearrangement in a polycarbonate film has been analyzed as a function of temperature and humidity on the basis of previously reported (Koyler and Mann, 1977) experimental data. Results indicate that in the homogeneous amorphous phase, photoFries rearrangement is a concerted process proceeding either from the pi star reversed arrow n singlet, in which case it must be subject to considerable self quenching, or from a triplet, presumably the first triplet since the lifetime of higher triplets is expected to be very short in the solid phase. If the parent excited state is the first triplet, chain scission is possibly an independent process, probably occurring from the pi star reversed arrow n singlet. Evidence of chain scission on photodegradation in the solid state includes loss of C-O and C-C bond intensities revealed in the Fourier transform infrared spectra, gel permeation chromotography elution profiles of degraded film samples dissolved in CHCl3, and a decrease in tensile strength and T sub g as photodegradation proceeds. Chain scission is apparently inhibited as photoFries products accumulate.

Gupta, A.↗
NASA NTRS1979

Techniques for interpretation of geoid anomalies

For purposes of geological interpretation, techniques are developed to compute directly the geoid anomaly over models of density within the earth. Ideal bodies such as line segments, vertical sheets, and rectangles are first used to calculate the geoid anomaly. Realistic bodies are modeled with formulas for two-dimensional polygons and three-dimensional polyhedra. By using Fourier transform methods the two-dimensional geoid is seen to be a filtered version of the gravity field, in which the long-wavelength components are magnified and the short-wavelength components diminished.

Chapman, M. E.↗
NASA NTRS1979

A method of mapping compact structure in radio sources using VLBI observations

A two-part technique is described for determining the angular structure of the compact components of radio sources from VLBI observations. With this technique, the source structure is first approximated, using both amplitudes and closure phases, by a model consisting of circularly symmetric Gaussian components located on a grid of positions on the sky. The second part begins by employing this model to predict the visibility phase corresponding to each observed visibility amplitude; these estimated visibility phases are then adjusted to agree with the observed closure phases. The resulting estimates of the visibility phases and the observed visibility amplitudes are then combined in a direct Fourier transform to produce a 'dirty' source map that is deconvolved via the CLEAN procedure on the basis of the point-source response. Some examples based on data generated from test models are provided.

Cotton, W. D.↗
NASA NTRS1979

Alternative signal processing techniques for a pulsed laser Doppler velocimeter system

The laser Doppler velocimeter system (LDV) being tested at NASA MSFC, Alabama, relies on a bank of classical filters for processing the returned lidar signal. Due to the complexity of this conventional filter system, alternative signal processing methods have been proposed for obtaining the Doppler spectrum. The fast Fourier transform (FFT) and the pulse-pair estimator are two techniques which appear to offer some advantages over the existing system. The work reported employs digital computer simulation to compare and evaluate these two processing methods for determining the first and second moments of the LDV velocity spectrum.

Calhoun, M. D.↗
NASA NTRS1979

Influence of phase cancellation and pulse shape artifacts on ultrasonic spectrum analysis

Both continuous wave and Fourier transformed pulse ultrasonic spectroscopy are being applied to material and flow characterization. Ideal samples and flaws (flat, parallel, and homogeneous) and ideal ultrasonic apparatus (producing delta function stress waves) provide acoustic spectra which can be partially inverted. However, in the presence of material inhomogeneity, lack of sample flatness or parallelism, or finite risetime pulses, the spectra become quite complex and produce phase cancellations at the transducer as well as pulse shape spectral artifacts. In this paper, we examine the nature of these artifacts for both simple and practical samples. Sample spectra are contrasted for several different transducer/electronic systems. Spectra obtained with a phase insensitive acousto-electric transducer (AET) combined with a frequency tracked tone-burst spectroscopy (TBS) method are presented. Analysis of the test configuration is shown to produce spectra consistent with that obtained with the AET-TBS combination.

Heyman, J. S.↗
NASA NTRS1979

SETI - High sensitivity searches at NASA with high speed tape recorders

The paper reports the two observing programs conducted to compare two techniques which have been proposed as methods for performing the requisite Fourier transformations in very large multichannel spectrum analysers (MCSA): the direct digital FFT and optical transform processor. The details of the observations at NRAO utilizing a direct digital FFT are given. A description of the NAIC, Arecibo observations utilizing an optical processor at the Environmental Research Institute of Michigan (ERIM) and a microdensitometer at Electromagnetics System Laboratories (ESL) is presented. For both observing programs, statistical analysis of the power spectra produced by the nonreal-time MCSAs (or post-processing) was accomplished.

Tarter, J.↗
NASA NTRS1979

Dynamic response of damaged angleplied fiber composites

The effects of low level damage induced by monotonic load, cyclic load and/or residual stresses on the vibration frequencies and damping factors of fiber composite angleplied laminates were investigated. Two different composite systems were studied - low modulus fiber and ultra high modulus fiber composites. The results obtained show that the frequencies and damping factors of angleplied laminates made from low modulus fiber composites are sensitive to low level damage while those made from ultra high modulus composites are not. Vibration tests may not be sufficiently sensitive to assess concentrated local damage in angleplied laminates. Dynamic response determined from low-velocity impact coupled with the Fast Fourier Transform and packaged in a minicomputer can be a convenient procedure for assessing low-level damage.

Chamis, C. C.↗
NASA NTRS1980

Symbolic-numeric interface: A review

A survey of the use of a combination of symbolic and numerical calculations is presented. Symbolic calculations primarily refer to the computer processing of procedures from classical algebra, analysis, and calculus. Numerical calculations refer to both numerical mathematics research and scientific computation. This survey is intended to point out a large number of problem areas where a cooperation of symbolic and numerical methods is likely to bear many fruits. These areas include such classical operations as differentiation and integration, such diverse activities as function approximations and qualitative analysis, and such contemporary topics as finite element calculations and computation complexity. It is contended that other less obvious topics such as the fast Fourier transform, linear algebra, nonlinear analysis and error analysis would also benefit from a synergistic approach.

Ng, E. W.↗
NASA NTRS1980

Verification of interim simulated atmospheric turbulence

During horizontal and near-horizontal flight of the space shuttle orbiter, the effects of atmospheric turbulence on the vehicle are crucial in establishing the space shuttle design, control, and human pilot effects. The effects of both turbulent gusts and gust gradients (shears) must be taken into account. By means of a nonrecursive turbulence simulation model, twelve simulated turbulence time series for gusts and gust gradients were generated as part of a previous investigation. The current investigation was concerned with the spectral analysis of the time series based on the use of Fourier transform theory. A comparison between the computed spectra and the corresponding von Karman theoretical spectra is also included. A basic difference is explained between the computed and theoretical spectra which was identified as a result of the comparison. Conclusions and recommendations are presented.

Tatom, F. B.↗
NASA NTRS1980

Lear jet boundary layer/shear layer laser propagation experiments

Optical degradations of aircraft turbulent boundary layers with shear layers generated by aerodynamic fences are analyzed. A collimated 2.5 cm diameter helium-neon laser (0.63 microns) traversed the approximate 5 cm thick natural aircraft boundary layer in double pass via a reflective airfoil. In addition, several flights examined shear layer-induced optical degradation. Flight altitudes ranged from 1.5 to 12 km, while Mach numbers were varied from 0.3 to 0.8. Average line spread function (LSF) and Modulation Transfer Function (MTF) data were obtained by averaging a large number of tilt-removed curves. Fourier transforming the resulting average MTF yields an LSF, thus affording a direct comparison of the two optical measurements. Agreement was good for the aerodynamic fence arrangement, but only fair in the case of a turbulent boundary layer. Values of phase variance inferred from the LSF instrument for a single pass through the random flow and corrected for a large aperture ranged from 0.08 to 0.11 waves (lambda = .63 microns) for the boundary layer. Corresponding values for the fence vary from 0.08 to 0.16 waves. Extrapolation of these values to 10.6 microns suggests negligible degradation for a CO2 laser transmitted through a 5 cm thick, subsonic turbulent boundary layer.

Gilbert, K.↗
NASA NTRS1980

Cycle II.5 aircraft aero-optical turbulent boundary-layer/shear-layer measurements

The aero-optical effects associated with propagating a laser beam through aircraft turbulent boundary layers and shear layers were examined. Observed laser optical performance levels were compared with those inferred from aerodynamic measurements of unsteady densities and correlation lengths within these random flows. Optical instrumentation included a fast shearing interferometer (FSI). A 9 cm diameter collimated helium neon laser beam made a double pass through the aircraft random flow via an airfoil mirror located one meter from the fuselage. Typical aircraft turbulent boundary layer thickness measured 0.3 meters. Averaging many FSI generated modulation transfer functions (MTFs) and Fourier transforming, this average yields the expected far field intensity degradation associated with an aircraft mounted laser system. Aerodynamic instrumentation included fine wire probes to measure unsteady temperature and mass flux. A laser doppler velocimeter measured unsteady velocity within the flows. An analysis of these data yielded point measurements of unsteady density and correlation length.

Gilbert, K.↗
NASA NTRS1979

Rapid data comparison technique development for N-ray/X-ray analysis

An operational N-ray/X-ray computer analysis system for nondestructive testing problems was realized by developing: (1) more efficient data transfer routines for use in existing image processing systems; (2) the capability to store and analyze multiple N-ray/X-ray images; (3) an efficient 2-D Fast Fourier Transform; and (4) transfer functions compensation capability to correct for distortions and nonlinearities of N-rays/X-rays. Applications of the technique are summarized for the following: thermal protection system tile with hydraulic fluid; thermal protection system tile with corrosion; thermal protection system tile debonding; stainless steel tubing corrosion; defective electrical devices; fast film restoration and deblur; corrosion tracking over time; reduction of source vignetting, and identification of materials (0 rings, Teflon parts, soft goods) via table look up.

Butterfield, R. L.↗
NASA NTRS1980

Scannable beam forming interferometer antenna array system

An antenna array is described which comprises three interferometer pairs of antenna elements with selected spacings made to form a single beam which is readily scannable. All spatial frequencies generated by a signal and intercepted by the array are derived from a signal processing technique applied to the array. The array samples space in the spatial frequency domain while the signal processing technique utilizes real time convolution of functions in the spectral frequency domain. Summation of the appropriate spatial frequencies is equilvalent to a Fourier transform operation, yielding the location of the signal source in space. Resolution and freedom from interference of the interferometer system is equal to that of a fully filled array of the same aperture size containing element spacings of one half wavelength. An antenna array system comprising four antenna elements forming six interferometer pairs with a resolution equal to that of a sixteen element array with spacings of one half wavelength is described, as well as other multiples of one quarter wavelength of partial multiples of a wave length.

Kaiser, J. A., Jr.↗
NASA NTRS1980

The Jet Propulsion Laboratory/California Institute of Technology block 2 VLBI processor

A multistation, multichannel cross correlation processor using the 250 k bit to 4 M bit recording format is discussed. The design is modular, using bit sliced microprocessors to perform the routine calculations for phase and delay on a per station basis, as well as for fractional bit shift correction and Fourier transformation of the correlation coefficients on a per baseline basis.

Rogtad, D. H.↗