Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “pathway analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,729 records · Page 96
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

The bright frontiers of microbial metabolic optogenetics

In recent years, light-responsive systems from the field of optogenetics have been applied to several areas of metabolic engineering with remarkable success. By taking advantage of light's high tunability, reversibility, and orthogonality to host endogenous processes, optogenetic systems have enabled unprecedented dynamical controls of microbial fermentations for chemical production, metabolic flux analysis, and population compositions in co-cultures. In this article, we share our opinions on the current state of this new field of metabolic optogenetics. Furthermore, we make the case that it will continue to impact metabolic engineering in increasingly new directions, with the potential to challenge existing paradigms for metabolic pathway and strain optimization as well as bioreactor operation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Formation and energetics of amorphous rare earth (RE) carbonates in the RE 2 O 3 –CO 2 –H 2 O system

Amorphous materials are of interest in the genesis of crystalline solids. They are often the first to precipitate from supersaturated solutions and are in the nanometer size range, transforming into a nanocrystalline metastable phase, and then to thermodynamically stable phases. One must seek knowledge of the composition, structure, thermodynamics, kinetics, and reaction pathways that relate the amorphous and crystalline phases. The subject of this study is the amorphous phases in the system RE 2 O 3 -CO 2 –H 2 O (RE- La, Nd, Dy,Yb). They were synthesized via direct precipitation and urea hydrolysis, and characterized by powder XRD, DTA with mass spectrometric analysis of the evolved gases. Phases have the non-stoichiometric composition RE 2 O 3 ·xCO 2 ·yH 2 O (1 < x < 3, 3 < y <7), which is different from that of crystalline simple carbonates and hydroxycarbonates. Thus we consider them to be amorphous precursors, rather than amorphous carbonates. High temperature oxide melt solution calorimetry in molten sodium molybdate solvent was used to derive their enthalpies of formation from oxides and elements. Increase of energetic stability per mole of RE 2 O 3 compounds occurs in the order: RE 2 O 3 → 2RE(OH)3→ 2REO(OH) → RE 2 O 2 CO 3 → Amorphous precursor → 2(REOHCO 3 ) → RE 2 (CO 3 ) 3 ·yH 2 O. We calculated the enthalpies of possible transformations of amorphous precursors to crystalline phases and conclude that thermodynamics determines the dependence of the crystallizing products on the temperature and partial pressure of CO 2 and H 2 O. Amorphous precursors are clearly intermediate in the synthesis, and ternary phases containing both H 2 O and CO 2 compete with each other in terms of thermodynamic stability. The energy landscape obtained here will allow one to directly synthesize specific products and control their functionality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Emergent moments in a Hund's impurity

Here, motivated by the relevance of Hund's coupling in the context of multiorbital superconductors, we revisit the problem of a multiorbital Kondo impurity with Hund's interaction. Using dynamical large-N techniques, we propose an efficient approach that retains the essential physics at play, while providing a pathway to scalable quantum impurity solvers. We are able to follow the ground state, dynamic, and thermodynamic properties of this system over many decades of temperature. Our approach captures the emergence of large moments and follows the stretched evolution of the physics down to their exponentially suppressed Kondo temperature. We focus our analysis on the intermediate finite temperature phase which presents an alternate paramagnetic state due to the emergent moment and discuss the relevance of this regime to Hund's metals.

36 MATERIALS SCIENCE↗
DOE OSTI2020

A temporal hierarchy underpins the transcription factor–DNA interactome of the maize UPR

Adverse environmental conditions reduce crop productivity and often increase the load of unfolded or misfolded proteins in the endoplasmic reticulum (ER). This potentially lethal condition, known as ER stress, is buffered by the unfolded protein response (UPR), a set of signaling pathways designed to either recover ER functionality or ignite programmed cell death. Despite the biological significance of the UPR to the life of the organism, the regulatory transcriptional landscape underpinning ER stress management is largely unmapped, especially in crops. To fill this significant knowledge gap, we performed a large–scale systems–level analysis of the protein–DNA interaction (PDI) network in maize (Zea mays). Using 23 promoter fragments of six UPR marker genes in a high–throughput enhanced yeast one–hybrid assay, we identified a highly interconnected network of 262 transcription factors (TFs) associated with significant biological traits and 831 PDIs underlying the UPR. We established a temporal hierarchy of TF binding to gene promoters within the same family as well as across different families of TFs. Cistrome analysis revealed the dynamic activities of a variety of cis–regulatory elements (CREs) in ER stress–responsive gene promoters. By integrating the cistrome results into a TF network analysis, we mapped a subnetwork of TFs associated with a CRE that may contribute to UPR management. Lastly, we validated the role of a predicted network hub gene using the Arabidopsis system. The PDIs, TF networks, and CREs identified in our work are foundational resources for understanding transcription–regulatory mechanisms in the stress responses and crop improvement.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Developing novel electrodes with ultralow catalyst loading for high-efficiency hydrogen production in proton exchange membrane electrolyzer cells

Hydrogen plays more crucial roles for decarbonizing the planets and meeting the climate challenges because of its high energy density and zero-emission. It can be produced with proton exchange membrane electrolyzer cells (PEMECs) driven by sustainable and renewable energy resources. Although PEMECs have a number of advantages, including high purity production, quick response, and the ability to operate at high pressure facilitating the gas delivering, their performance and cost greatly hinder their commercial-scale applications. To achieve high-efficiency and cost-reduced hydrogen production in PEMECs, we proposed thin engineered liquid/gas diffusion layers (LGDLs) and associated electrodes, i.e., catalyst-coated LGDLs (CCLGDLs), over conventional porous transport layers (PTLs) and catalyst-coated membranes (CCMs). The research approaches in this project are based on material synthesis, in-situ and ex-situ characterizations, component design and treatment, numerical modeling, and cost analysis. The thin and tunable LGDLs (TT-LGDLs) and CCLGDLs were successfully developed with great performance improvement as demonstrated in lab-scale, bench-scale, and system-scale electrolyzer tests. The electrode thickness was reduced from 370 µm to less than 100 µm with simplified fabrication processes. With the catalytically enhanced Ir-based catalyst coating, the as-developed CCLGDLs with a catalyst loading of 0.34 mg Ir /cm 2 achieved a cell performance of 1.77 V at 2 A cm -2 , exhibiting the catalyst mass activity enhanced by >20 times with significant catalyst saving over conventional catalyst cell design. In-situ PEMEC characterizations, including the current distribution mapping and high-speed and multiscale visualizations, were conducted for a deeper understanding of mass transport and electrochemical reactions within an electrolyzer with LGDLs and CCLGDLs. A 2D cell model was developed and validated for the enhanced performance on TT-LGDL through reducing ohmic losses due to nonuniform hydration and water transport. Further, the cost analysis results have shown a path to move beyond equivalency and surpass costs associated with the project baseline. In this project, the design and fabrication of TT-LGDLs and CCLGDLs will contribute to the performance enhancement, manufacturing simplification, and cost reduction for PEMECs and other energy conversion devices, thus shortening their pathways towards commercialization. This project also provides a good foundation for furthering the in-situ reaction interface research.

08 HYDROGEN↗
DOE OSTI2024

Microwave-Assisted Catalytic Conversion of Tar Using Iron Catalyst Doped with Ni/La/Ce

The goal of this research is to study the microwave-assisted catalytic dry reforming of toluene using Fe/Al2O3 as a catalyst in the presence of various dopants such as Ni/La/Ce in a conventional fixed-bed reactor. Initial studies show that both CO2 and toluene conversion can be achieved up to 85% at 500 °C. Higher toluene conversion and syngas production was achieved under microwave conditions compared to conventional thermal conditions. The pre and post-reaction catalyst characterizations were performed using X-ray diffraction analysis (XRD) and thermogravimetric analysis (TGA). The tar analysis was performed using gas chromatography–mass spectrometry (GC-MS). The product gas mainly consisted of H2, CO, methane, propane, ethylene, and ethane along with small amounts of benzene, and naphthalene. The production of benzene indicates the hydrodemethylation (HDM) process of toluene, which requires hydrogen to initiate the reaction. The reaction pathway was proposed based on the observed product gas.

Linge Gowda, Anitha Shankara↗
DOE OSTI2022

Decarbonizing Medium & Heavy-Duty On-Road Vehicles

We analyze the decarbonization potential of medium and heavy-duty vehicles (MHDVs) across multiple vehicle classes and market segments. We evaluate the timeframe in which zero-emission vehicles (ZEVs) could achieve cost parity with conventional diesel vehicles and the implications for energy and emissions. Our results show that ZEVs can achieve cost parity with conventional vehicles by 2035 across the majority of vehicle classes and market segments. Emissions reductions range from 27% to 77% by 2050 relative to 2019 across multiple fuel cost and technology progress sensitivities. Multiple technology pathways are viable for decarbonization, including battery-electric vehicles and hydrogen fuel cell electric vehicles. This presentation is based on previous work published by NREL: Ledna, C., Muratori, M., Yip, A., Jadun, P., and Hoehne, C. 2022. Decarbonizing Medium & Heavy-Duty On-Road Vehicles: Zero-Emission Vehicles Cost Analysis. National Renewable Energy Laboratory, https://www.nrel.gov/docs/fy22osti/82081.pdf.

ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2022

Pyruvate, phosphate dikinase regulatory protein impacts light response of C4 photosynthesis in Setaria viridis

In C4 plants, the pyruvate (Pyr), phosphate dikinase regulatory protein (PDRP) regulates the activity of the C4 pathway enzyme Pyr, phosphate dikinase (PPDK) in a light-/dark-dependent manner. The importance of this regulatory action to C4 pathway function and overall C4 photosynthesis is unknown. To resolve this question, we assessed in vivo PPDK phospho-regulation and whole leaf photophysiology in a CRISPR–Cas9 PDRP knockout (KO) mutant of the NADP-ME C4 grass green millet (Setaria viridis). PDRP enzyme activity was undetectable in leaf extracts from PDRP KO lines. Likewise, PPDK phosphorylated at the PDRP-regulatory Thr residue was immunologically undetectable in leaf extracts. PPDK enzyme activity in rapid leaf extracts was constitutively high in the PDRP KO lines, irrespective of light or dark pretreatment of leaves. Gas exchange analysis of net CO2 assimilation revealed PDRP KO leaves had markedly slower light induction kinetics when leaves transition from dark to high-light or low-light to high-light. In the initial 30 min of the light induction phase, KO leaves had an ~15% lower net CO2 assimilation rate versus the wild-type (WT). Despite the impaired slower induction kinetics, we found growth and vigor of the KO lines to be visibly indistinguishable from the WT when grown in normal air and under standard growth chamber conditions. However, the PDRP KO plants grown under a fluctuating light regime exhibited a gradual multi-day decline in Fv/Fm, indicative of progressive photosystem II damage due to the absence of PDRP. Collectively, our results demonstrate that one of PDRP’s functions in C4 photosynthesis is to ensure optimal photosynthetic light induction kinetics during dynamic changes in incident light.

Plant Sciences↗
DOE OSTI2024

Creation of Multi-Principal Element Alloy NiCoCr Nanostructures via Nanosecond Laser-Induced Dewetting

The multi-principal element alloy nanoparticles (MPEA NPs), a new class of nanomaterials, present a highly rewarding opportunity to explore new or vastly different functional properties than the traditional mono/bi/multimetallic nanostructures due to their unique characteristics of atomic-level homogeneous mixing of constituent elements in the nanoconfinements. Here, in this paper, the successful creation of NiCoCr nanoparticles, a well-known MPEA system is reported, using ultrafast nanosecond laser-induced dewetting of alloy thin films. Nanoparticle formation occurs by spontaneously breaking the energetically unstable thin films in a melt state under laser-induced hydrodynamic instability and subsequently accumulating in a droplet shape via surface energy minimization. While NiCoCr alloy shows a stark contrast in physical properties compared to individual metallic constituents, i.e., Ni, Co, and Cr, yet the transient nature of the laser-driven process facilitates a homogeneous distribution of the constituents (Ni, Co, and Cr) in the nanoparticles. Using high-resolution chemical analysis and scanning nanodiffraction, the environmental stability and grain arrangement in the nanoparticles are further investigated. Thermal transport simulations reveal that the ultrashort (≈100 ns) melt-state lifetime of NiCoCr during the dewetting event helps retain the constituent elements in a single-phase solid solution with homogenous distribution and opens the pathway to create the unique MPEA nanoparticles with laser-induced dewetting process.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Priming mechanisms providing plants and microbes access to mineral-associated organic matter

Mineral-associated organic matter (MAOM) is considered a stable reservoir for soil nutrients that influences long-term soil carbon (C) and nitrogen (N) dynamics. However, recent experimental and theoretical evidence shows that root exudates may mobilize MAOM, thereby providing plants and microbes access to a large and N-rich pool. Given the mechanisms underlying MAOM C and N mobilization remain largely untested, we examined direct and indirect pathways by which root exudates destabilize this nutrient pool in laboratory mesocosms. We simulated root exudation with 13 C-labeled oxalic acid to test whether root exudates are directly capable of mobilizing MAOM from mineral surfaces; and with 13 C-labeled glucose to test whether indirect stimulation of microbial and extracellular enzyme activity leads to MAOM decomposition. We also tested the potential for oxalic acid and glucose to mobilize MAOM in an additional subset of sterilized soils to clarify the potential for non-microbial pathways of MAOM destabilization. Over the course of the 12-day MAOM incubation with and without simulated exudates, we measured C cycling (CO 2 respiration rates, 13 C–CO 2 efflux), N cycling (inorganic N pools, gross N mineralization) and related microbial processes (enzyme activities and microbial community composition via phospholipid fatty acid analysis). Both of the simulated root exudates enhanced MAOM-C mineralization, with cumulative respiration increasing 35–89% relative to the water-only control. Likewise, glucose additions enhanced the production of an exo-cellulase and a chitinase by up to 130% and 39%, respectively, while oxalic acid enhanced oxidative enzyme activities up to 91% greater than control rates. We observed a positive association between glucose-induced shifts in enzyme activities, MAOM-C mineralization, and gross ammonification. Oxalic acid additions were associated with initial increases in fungal relative abundance and in sterile soils appeared to stimulate the release of metals and dissolved organic nitrogen into exchangeable pools. Our results indicate that common root exudates, like glucose and oxalic acid, can significantly increase the turnover and potential release of C and N from MAOM through indirect (e.g., enzyme induction) and direct (e.g., mobilization of metal oxides) mechanisms.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Hybrid Grid-Renewable Strategies for Green Steel Production under Electricity Market Uncertainty

Volatility in grid spot prices is expected to rise with climate change-driven demand pressures and the intermittency of renewable generation. This volatility poses financial risks for green hydrogen-based steel production. The Direct Reduced Iron− Electric Arc Furnace (H 2 -DRI-EAF) is a promising pathway to decarbonize steel, which accounts for ∼8% of global GHG emissions. This study assesses how increased grid spot price volatility influences the optimal sizing and operation of H2-DRIEAF plants under three operational scenarios: grid-connected, fully behind-the-meter (islanded), and mixed-mode (semi-islanded). Our analysis identifies the semi-islanded configuration as the most cost-effective solution, achieving a Levelized Cost of Steel (LCOS) 10−35% lower than sourcing energy solely from the grid. Modeling also shows hydrogen storage or selective electricity purchases at high prices (>$1000/MWh) generally outperform battery storage, except under extreme volatility. Additionally, the study explores cost reduction strategies to strengthen the economic viability and sustainability of green steel production.

Batteries↗
DOE OSTI2021

Metastable Metallic Phase of a Bilayer Blue Phosphorene Induced by Interlayer Bonding and Intralayer Charge Redistributions

We have carried out diffusion Monte Carlo calculations for an A 1 B -1 -stacked bilayer blue phosphorene to find that it undergoes a semiconductor-metal transition as the interlayer distance decreases. While the most stable bilayer structure is a semiconducting one with two monolayers coupled through weak van der Waals interaction, the metallic bilayer at a shorter interlayer distance is found to be only metastable. This is in contrast to a recent theoretical prediction based on random phase approximation that the metallic phase would be the most stable bilayer configuration of blue phosphorene. Our analysis of charge density distributions reveals that the metastable metallic phase is induced by interlayer chemical bonding and intralayer charge redistributions. This study enriches our understanding of interlayer binding of a blue phosphorene and contributes to establishment of correct energetic order between its different phases, which will be essential in devising an experimental pathway for a metallic phosphorene.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Proton-Coupled Electron Transfer Mechanisms for CO 2 Reduction to Methanol Catalyzed by Surface-Immobilized Cobalt Phthalocyanine

Immobilized cobalt phthalocyanine (CoPc) is a highly promising architecture for the six-proton, six-electron reduction of CO 2 to methanol. This electroreduction process relies on proton-coupled electron transfer (PCET) reactions that can occur by sequential or concerted mechanisms. Immobilization on a conductive support such as carbon nanotubes or graphitic flakes can fundamentally alter the PCET mechanisms. We use density functional theory (DFT) calculations of CoPc adsorbed on an explicit graphitic surface model to investigate intermediates in the electroreduction of CO 2 to methanol. Our calculations show that the alignment of the CoPc and graphitic electronic states influences the reductive chemistry. These calculations also distinguish between charging the graphitic surface and reducing the CoPc and adsorbed intermediates as electrons are added to the system. This analysis allows us to identify the chemical transformations that are likely to be concerted PCET, defined for these systems as the mechanism in which protonation of a CO 2 reduction intermediate is accompanied by electron abstraction from the graphitic surface to the adsorbate without thermodynamically stable intermediates. Furthermore, this work establishes a mechanistic pathway for methanol production that is consistent with experimental observations and provides fundamental insight into how immobilization of the CoPc impacts its CO 2 reduction chemistry.

Adsorption↗
DOE OSTI2026

High-Rate, Selective Electrosynthesis of Cyclohexanone Oxime via In Situ Generation and Release of Hydroxylamine on Bismuth

Oxime compounds are key industrial intermediates for nylon precursors and commodity chemicals. However, conventional routes rely on multistep reactions and hydroxylamine (NH 2 OH) salts, raising significant safety and sustainability concerns. Although electrosynthesis offers an alternative, oxime formation on d-block transition metals suffers from poor selectivity, as nitrogen oxyanion intermediates bind strongly to the surface and are readily over-reduced to ammonia. Here, we report morphology-controlled p-block bismuth rhombic dodecahedra (Bi RDs) that promote in situ NH 2 OH generation and its desorption into the electrolyte, enabling an electrochemical-chemical decoupled route for cyclohexanone oxime (CHO) synthesis. Bi RDs deliver nearly 100% Faradaic efficiency (FE) at −0.5 V vs. RHE and a yield of 1.4 mmol h –1 cm –2 at −0.9 V vs. RHE in an H-cell, while maintaining a CHO selectivity of nearly 100% at 100 mA cm –2 in a flow cell. Under identical conditions, d-block electrodes (Cu, Pd, Ag) show FE below 30%. Density functional theory calculations reveal that Bi 6p orbital-derived surface states weaken intermediate binding and facilitate NH 2 OH desorption, suppressing over-reduction. Kinetic analysis, post-addition trapping experiments, and in situ ATR-FTIR and Raman spectroscopy suggest the following reaction mechanism: NH 2 OH is selectively generated at the electrode surface, released as a freely diffusing intermediate, and undergoes homogeneous condensation with cyclohexanone in the bulk electrolyte, bypassing the surface-confined Langmuir–Hinshelwood pathway. These findings demonstrate that regulating intermediate desorption through p-block orbital chemistry provides a general strategy for achieving high selectivity in electro-organic nitrogen synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Economic evaluation of infrastructures for thermochemical upcycling of post-consumer plastic waste

Thermochemical technologies, such as pyrolysis, offer a potentially scalable pathway for upcycling diverse types of plastic waste (PW) into value-added chemicals. However, deploying these technologies in waste management infrastructures is not straightforward because such systems involve a wide range of interdependent stakeholders, processing facilities, and products. In this work, we present a holistic optimization framework that integrates value-chain analysis, techno-economic analysis, and life-cycle analysis for investigating the economic viability and environmental benefits of upcycling infrastructures that collect, sort, clean, and process post-consumer PW for producing virgin polymer resins. The framework is applied to a case study in the upper Midwest region of the US. Our analysis reveals that the infrastructures are economically viable and could activate a regional circular economy that generates over 1 billion USD in annual profit. Moreover, our analysis reveals that this economy can reduce the carbon footprint of PW incineration by half. Our framework also determines the inherent values of post-consumer PW and of derived products such as plastic bales and pyrolysis oil; we find that, in these infrastructures, PW becomes a highly valuable feedstock with a market value of 500 USD per tonne. Here, we discuss how this market value can generate incentives that foster more effective waste pre-sorting practices by consumers that can help bypass material recycling facilities and increase total system profit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Statistical relationships across epigenomes using large-scale hierarchical clustering

Recent advances in genomics and sequencing platforms have revolutionized our ability to create immense data sets, particularly for studying epigenetic regulation of gene expression. However, the avalanche of epigenomic data is difficult to parse for biological interpretation given nonlinear complex patterns and relationships. This attractive challenge in epigenomic data lends itself to machine learning for discerning infectivity and susceptibility. In this study, we explore over 3000 epigenomes of uninfected individuals and provide a framework to characterize the relationships among epigenetic modifiers, their modifiers, genetic loci, and specific immune cell types across all chromosomes using hierarchical clustering. Hierarchical clustering of epigenomic data revealed consistent epigenetic patterns across chromosomes, demonstrating that variation due to epigenetic modifiers is greater than variation between cell types. Gene Ontology and KEGG pathway analyses indicated significant enrichment of genes involved in chromatin remodeling, mRNA splicing, immune responses, and the regulation of microRNAs and snoRNAs. Epigenetic modifiers frequently formed biologically relevant clusters, including the cohesin complex, RNA Polymerase II transcription factors, and PRC2 complex members. These clustering behaviors remained consistent across all chromosomes, supported by entropy analysis and high Adjusted Rand Index scores, indicating robust cross-chromosomal similarity. Co-occurrence analysis further revealed specific sets of modifiers that consistently appeared together within clusters, reflecting shared biological functions and interactions. Validation using another dataset confirmed the reproducibility of these clustering patterns and modifier co-occurrence relationships, underscoring the reliability and generalizability of the methodology.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2023

Identification of ancestral gnathostome Gli3 enhancers with activity in mammals

Abnormal expression of the transcriptional regulator and hedgehog (Hh) signaling pathway effector Gli3 is known to trigger congenital disease, most frequently affecting the central nervous system (CNS) and the limbs. Accurate delineation of the genomic cis-regulatory landscape controlling Gli3 transcription during embryonic development is critical for the interpretation of noncoding variants associated with congenital defects. Here, we employed a comparative genomic analysis on fish species with a slow rate of molecular evolution to identify seven previously unknown conserved noncoding elements (CNEs) in Gli3 intronic intervals (CNE15–21). Transgenic assays in zebrafish revealed that most of these elements drive activities in Gli3 expressing tissues, predominantly the fins, CNS, and the heart. Intersection of these CNEs with human disease associated SNPs identified CNE15 as a putative mammalian craniofacial enhancer, with conserved activity in vertebrates and potentially affected by mutation associated with human craniofacial morphology. Finally, comparative functional dissection of an appendage-specific CNE conserved in slowly evolving fish (elephant shark), but not in teleost (CNE14/hs1586) indicates co-option of limb specificity from other tissues prior to the divergence of amniotes and lobe-finned fish. In conclusion, these results uncover a novel subset of intronic Gli3 enhancers that arose in the common ancestor of gnathostomes and whose sequence components were likely gradually modified in other species during the process of evolutionary diversification.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Cytochrome P450–catalyzed biosynthesis of furanoditerpenoids in the bioenergy crop switchgrass ( Panicum virgatum L.)

Specialized diterpenoid metabolites are important mediators of plant-environment interactions in monocot crops. To understand metabolite functions in plant environmental adaptation that ultimately can enable crop improvement strategies, a deeper knowledge of the underlying species-specific biosynthetic pathways is required. Furthermore, we report the genomics-enabled discovery of five cytochrome P450 monooxygenases (CYP71Z25-CYP71Z29) that form previously unknown furanoditerpenoids in the monocot bioenergy crop Panicum virgatum (switchgrass). Combinatorial pathway reconstruction showed that CYP71Z25-CYP71Z29 catalyze furan ring addition directly to primary diterpene alcohol intermediates derived from distinct class II diterpene synthase products. Transcriptional co-expression patterns and the presence of select diterpenoids in switchgrass roots support the occurrence of P450-derived furanoditerpenoids in planta. Integrating molecular dynamics, structural analysis and targeted mutagenesis identified active site determinants that contribute to the distinct catalytic specificities underlying the broad substrate promiscuity of CYP71Z25-CYP71Z29 for native and non-native diterpenoids.

59 BASIC BIOLOGICAL SCIENCES↗