Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ROADS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,675 records · Page 93

Site 300: Swainson's Hawk Survey Report, 2019

Garcia and Associates (GANDA) was contracted by the Lawrence Livermore National Laboratory (LLNL) to conduct Swainson’s Hawk surveys as described by the Swainson’s Hawk Technical Advisory Committee (TAC) within Recommended Timing and Methodology for Swainson’s Hawk Nesting Surveys for the California Central Valley (2000) at Site 300. Surveys were conducted prior to planned well decommissioning activities on LLNL property along Corral Hollow Road in San Joaquin County, located west of Tracy. Well decommissioning work started in the fall of 2018, and two sites require work in the fall of 2019. Eight surveys were conducted at Site 300 from April 2019 to July 2019. Although no nesting Swainson’s Hawks were observed during any of the surveys, LLNL wildlife biologists reported several incidental Swainson’s Hawk observations within the survey area in the spring of 2019 (Lisa Paterson, personal communication, 2019).

54 ENVIRONMENTAL SCIENCES↗

Scoping Sampling at the Site 300 Water Line Project: Soil Sampling and Analysis Plan/Quality Assurance Plan

Lawrence Liverniore National Laboratory’s (LLNL) Mechanical Utilities Division (MUD) is currently scoping a project with the Project Management Office (PMO) Experimental Test Site 300 (S300) to install/upgrade roughly six miles of water line along established roads within the complex. This Sampling and Analysis Plan (SAP) outlines the requirements to collect an initial round of soil samples from the proposed alignment of the water line to provide preliminary data and information that can be used during project design. The samples will be submitted to an offsite contract laboratory for analysis.

54 ENVIRONMENTAL SCIENCES↗

Initial DOE SNF Standardized Canister Storage Configuration Alternatives Study

This study looks at storage configuration alternatives for United States Department of Energy (DOE) Spent Nuclear Fuel (SNF) Standardized Canisters loaded with DOE-owned SNF. The focus of the study is for the DOE SNF Standardized Canisters that would be packaged in the Idaho Nuclear Technology and Engineering Center (INTEC) area at Idaho National Laboratory (INL), but its general findings are useful across the DOE Complex. The study considered storage in existing facilities, modified existing facilities, new facilities, and new modular systems. The existing INTEC facilities considered in the study include the CPP-603 Irradiated Fuel Storage Facility (IFSF), the CPP-749 Underground Fuel Storage Facility (UFSF), the CPP-666 SNF Wet Storage Basin Facility, CPP-1774 Three Mile Island (TMI) Independent Spent Fuel Storage Facility (ISFSF), and the CPP-2707 Cask Pad Facility. The new facilities considered in the study include the Foster Wheeler designed Idaho Spent Fuel (ISF) Independent Spent Fuel Storage Installation (ISFSI) and some conceptual designs. The new modular systems considered in the study include Holtec International’s HI-STAR/HI-STORM, NAC International’s MAGNASTOR/UMS/MPC and Orano TN’s MATRIX/NUHOMS. Based on considerations of various factors, including but not limited to capacity, impact to facility operations, capital costs, expenditure rate, licensing issues, agreements with the State of Idaho, and road ready conditions, new modular storage systems from commercial vendors may have clear advantages over other storage alternatives. This is further supported by recent experience with West Valley Demonstration Project (WVDP) storage project for High Level Waste Glass canisters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Section 110 Evaluation of the Project 57 Rad-Safe Area Personnel Decontamination Building, Nye County, Nevada

Project 57 was an open-air, plutonium-dispersal safety test conducted by the United States in 1957 on a portion of the Nevada Test and Training Range (NTTR) (formerly the Las Vegas Bombing and Gunnery Range). The Project 57 test area, once known as Area 13, was a block of land abutting the northeastern boundary of the Nevada Test Site (NTS). The NTS was renamed the Nevada National Security Site (NNSS) in 2010. In keeping with the historical Cold War period designation, NTS will be used when discussing historic period events, while NNSS will be applied for contemporary activities. During Project 57, the high explosives of a nuclear weapon were triggered asymmetrically to simulate an accidental detonation. The test was conducted to study the extent of plutonium contamination from a nonnuclear yield accident, as well as assess the biological and environmental hazards such an event could create. Following the conclusion of the experiment, the contaminated area surrounding the ground zero (GZ) was fenced off and some of the contaminated equipment was buried in place. The Project 57 Rad-Safe area was abandoned. In 1981, the U.S. Department of Energy (DOE) decontaminated and decommissioned the Project 57 site. This Section 110 documentation was prompted by recognition that more than five decades have passed since the abandonment of the Project 57 Rad-Safe area, particularly the personnel decontamination building, which leaves the temporary structure vulnerable to natural forces of weathering and decay. However, these temporary facilities remain partially standing, allowing for a condition assessment and recommendations regarding the Rad-Safe area’s historical significance. The National Nuclear Security Administration, Nevada Field Office (NNSA/NFO) determined there was no area of potential effect (APE) (direct, indirect, or visual) because there is no planned undertaking and the Project 57 Rad-Safe area will continue to remain unused. Instead, a 4.5-acre study area was established to facilitate recording the Project 57 personnel decontamination building and the remaining accessory resources. The study area is bounded on the east by Valley Road and it extends to the east far enough to encompass the former Project 57 Rad-Safe area (Figure A-2). The Section 110 study area is located in the northwest quarter of Section 35, Township 07S Range 54E Mount Diablo Base and Meridian. It is on the 1962 Groom Mine SW USGS 7.5-minute series topographic quadrangle. Desert Research Institute (DRI) surveyed the Section 110 study area, resulting in the recording and evaluation of the Project 57 Rad-Safe area personnel decontamination building and four accessory resources (AR-1 through AR-4). Copies of the building form and report are on file at DRI and with the NNSA/NFO in Las Vegas, Nevada.

54 ENVIRONMENTAL SCIENCES↗

A summary of the Advanced WEC Dynamics and Control project

This report serves as a comprehensive summary of the work completed by the "Advanced WEC Dynamics and Controls projecr during the period of 2013-2019. This project was first envisioned to simply consider the question of designing a controller for wave energy converters (WECs), without a complete recognition of the broader considerations that such a task must necessarily examine. This document describes both the evolution of the project scope and the key findings produced. The basic goal of the project has been to deliver tractable methodologies and work flows that WEC designers can use to improve the performance of their machines. Engineering solutions, which may offer 80% of the impact, but require 20% of the effort compared to a perfect result (which may be many years of development down the road) were preferred. With this doctrine, the work of the project often involved translating existing methods that have been successfully developed and applied for other fields, into the application area of wave energy.

16 TIDAL AND WAVE POWER↗

Akutan Geothermal: Resource Report

Geothermal energy resources are present in the Hot Springs Bay Valley geothermal area, and the City has invested considerable money and time in the exploration of the resource for future use. Exploration activities funded primarily through a grant the City was awarded from Alaska Energy Authority and later supplemented by the U. S. Department of Energy (DOE), with cost share from the City. The exploration led to the development of a geothermal resource conceptual model that was built and refined between 2008 and 2018. During this period, geological and geophysical studies, exploration drilling and other activities were completed, including a preliminary feasibility study for a power project, investigations of the terrain for suitability for access and development, environmental and archeological review, plus TG well abandonment and a review of economic considerations. The model of the resource predicts that there is a viable geothermal resource in two general areas: on the northwest edge of Hot Springs Bay Valley going northwest of the valley (hot springs area) and southwest of the Valley (fumarole area). The resource temperature for the valley area is expected to be about 170°C (340°F) and given the size and permeability estimates (with a factor for the level of confidence in the estimates), the mean power capacity of the outflow resource is 3 MWe and the P50 (most likely) power capacity is 1 MWe. The fumarole area has an expected resource temperature of 240°C (464°F) and given the size and permeability estimates mean capacity is 20 MWe and the P50 (most likely) capacity is 9 MWe. Permeability is the most difficult factor to predict and has a significant impact on the available geothermal fluids and therefore the amount of power that can be generated. The uncertainty in this value is the main reason for lower confidence in the likelihood of exploration success and the wide range in predicted MW values. The permeability has been difficult to locate as indicated by the results of the flow test at AK-3 in 2017. The test resulted in the production of some fluid, but due to low permeability, the recharge to the wellbore was too slow to sustain flow. The greatest probability of overall MWe production is in the fumarole region, but development is hampered by poor accessibility. The extremely high cost of road building for exploratory drilling, put an end to planning at an intermediate stage of the project and refocused attention on the viability of development in the hot spring outflow part of the resource. The City will be determining what the next steps are with AK-3, which is still that is still open and maintained in a suspended status in HSBV. While AK-3 remains accessible (not plugged with cement) it will need to be maintained. The City has a bond with AOGCC that will remain in place until the well is abandoned. GRG recommends that the well be maintained open as an asset for the foreseeable future.

15 GEOTHERMAL ENERGY↗

An Assessment of the Potential for Utility-Scale Solar Energy Development on the Navajo Nation

The Navajo Nation covers about 27,000 square miles in the Southwestern United States with approximately 270 sunny days a year. Therefore, the Navajo Nation has the potential to develop utility-scale solar photovoltaic (PV) energy for the Navajo people and export electricity to major cities to generate revenues. In April 2019, the Navajo Nation issued a proclamation to increase residential and utility-scale renewable energy development on the Navajo Nation. In response, this research assesses the potential for utility-scale solar energy development on the Navajo Nation using criteria such as access to roads, transmission lines, slope/terrain data, aspect/direction, and culturally sensitive sites. These datasets are applied as layers using ArcGIS to identify regions that have good potential for utility-scale solar PV installations. Land availability on the Navajo Nation has been an issue for developing utility-scale solar PV, so this study proposes potential locations for solar PV and how much energy these potential sites could generate. Furthermore, two coal-fired power plants, the Navajo Generating Station and the San Juan Generating Station, will close soon and impact the Navajo Nation's energy supply and economy. This study seeks to answer two main questions: whether utility- scale solar energy could be used to replace the energy generated by both coal-fired powerplants, and what percentage of the Navajo Nation's energy demands can be met by utility-scale solar energy development? Economic development is a major concern; therefore, this study also examines what utility-scale solar development will mean for the Navajo Nation economy. The results of this study show that the Navajo Nation has a potential PV capacity of 45,729 MW to 91,459 MW. Even with the lowest calculated capacity, utility-scale solar PV has the potential to generate more than 11 times the power of the NGS and SJGS combined.

14 SOLAR ENERGY↗

Real-Time Adaptive Machine Learning Platform

As part of the Cyclotron Road program, Dauntless.io, Inc. extended its existing ultrafast (0.00001 – 0.001 second) real-time, adaptive machine learning platform for modeling & control of complex, high-value physical systems. Objectives included ability to scale ubiquitously & remain differentiated on a 5+ year horizon in the highly competitive, AI / machine learning market — a rapidly growing market that (overall) is estimated to be worth $191 B by 2024 at a CAGR of 37%.

97 MATHEMATICS AND COMPUTING↗

Wide Band-Gap Perovskites for Tandem Photovoltaics

This research was aimed at development of a mechanically-stacked, perovskite Multi-Junction Solar Cell in which (1) at least one Junction is made of metal-halide perovskite and (2) the Junctions are manufactured in parallel and then stacked to create the final module. This technology presented significant advanced manufacturing challenges and opportunities in getting to scale, including materials scale-up and the development of novel roll-to-roll processing and encapsulation methods. Research conducted was also applicable to a monolithically-integrated perovskite Multi-Junction Solar Cell, in which the two or more Junctions are integrated and electrically connected. The project explored the following technical opportunities in conjunction with the Cyclotron Road mentored entrepreneurial research experience: Fabrication of inorganic heterojunction layers on both sides of a perovskite semiconductor, and modification of interfaces; developed transparent electrode layers on both sides of a perovskite semiconductor; and developed a prototype and optimized perovskite Junction Solar Cell.

14 SOLAR ENERGY↗

Efficiency Enhancing Anti-Frost Coatings for Heat Exchangers

As part of the Cyclotron Road program, the participant worked to develop geometric inorganic metamaterial coatings with functional surface energies that approached theoretical minimum. Most coating technologies chemically modify surfaces by applying a fluoropolymer to cause water to bead and roll off the surface, but the metamaterial coatings studied under this project were designed to modify local surface tension of a droplet, such that it pulls down on it at the bottom like a spring and as the droplet grows, the magnitude of the surface tension force increases to overwhelm droplet adhesion forces, causing the droplet to be repelled. These attributes make this technology ideally suited for heat transfer applications. This project’s coating experiments on evaporator coils inside an air conditioning unit demonstrated significant increases in energy efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Fully Recyclable Advanced Composites with Reduced Cure Times for Improved Manufacturing Efficiency

At Cyclotron Road, the participant team from Mallinda focused its research efforts on developing its Polyimine chemistry for commercial applications. The value-differentiating characteristics of the technology are predicated on the chemical reversibility of the system which opens the door for a number of industrial applications. In short, the company’s technology is a highly crosslinked thermoset polymer network that can exchange covalent bonds within the polymer matrix when the polymer is heated to the glass transition temperature of the material. This leads to a resin system that can alternate between rigid and semi-rigid states; allowing for compression molding, and surface welding of thermosetting composite materials made with polyimine polymers. This research project worked towards improving the thermal properties of its resin from 80 °C to over 260 °C. The improved properties of Mallinda’s resin unlocks development potential within the automotive and aerospace markets where advance composite materials require stringent performance requirements and elevated operating temperatures.

36 MATERIALS SCIENCE↗

Electrothermal Micromirror Adaptive Illumination

As part of the Cyclotron Road program, Helux Lighting aimed to develop a highly adaptive illumination source based on microelectromechanical system (MEMS) technology and next-generation solid state lighting. Solid state lighting has caused a paradigm shift in the industry. Developing systems that put light only where it is needed can reduce energy consumption and have an impact on the well-being of the population by eliminating glare and wasted light. Full control could also reduce the disruption of sensitive ecosystems caused by light pollution. The most advanced fixtures available today are based on mechanical components that are bulky and expensive. The track light is the only inexpensive lighting system that permits redirection and, in some cases, spot size by motorized optical components. The most advanced light fixtures today are composed of a strategically arranged array of LEDs. More recent developments in the research community include dynamic liquid crystal lenses but fail to realize simultaneous dynamic steering and spot size. In this project, Helux worked on the capability development of their controllable micromirror combined with state-of-the-art solid state lighting to electronically adjusting light position, brightness, and illumination area.

42 ENGINEERING↗

Process scale-up and optimization of the metal-organic framework synthesis

Mosaic Materials is incubated under Cyclotron Road LBNL, focusing on design, synthesis, and characterization of metal-organic frameworks as highly selective and energy efficient adsorbents for carbon dioxide. The Chief Science Officer, Dr. Thomas McDonald, invented a new class of phase-change adsorbents for acid gas removal that the company is working to commercialize as its first product. ABPD worked with Mosaic team to scale up their synthesis process and evaluate the downstream processing.

36 MATERIALS SCIENCE↗

SMART Mobility. Urban Science Capstone Report

The U.S. Department of Energy’s Systems and Modeling for Accelerated Research in Transportation (SMART) Mobility Consortium is a multiyear, multi-laboratory collaborative, managed by the Energy Efficient Mobility Systems Program of the Office of Energy Efficiency and Renewable Energy, Vehicle Technologies Office, dedicated to further understanding the energy implications and opportunities of advanced mobility technologies and services. The Urban Science (US) Pillar focuses on maximum-mobility and minimum-energy opportunities associated with emerging transportation and transportation-related technologies specifically within the urban context. Such technologies, often referred to as automated, connected, efficient (or electrified), and shared (ACES), have the potential to greatly improve mobility and related quality of life in urban areas. Although all the SMART Mobility research pillars share some commonalities, Urban Science strives to model, analyze, and gain insights from the perspective of human settlements (the “city”) as a living organism. This is especially critical as the United States is one of the most urbanized countries, and as more and more of the global population migrates to urban areas.1 The urban mobility system consists of a complex network that reaches well beyond roads and vehicles and includes significant investments in public transit, private mobility services (such as taxis and transportation network companies, or TNCs), significant parking reserves, and curb management practices, not to mention the abundance of emerging on-demand micromobility services for the movement of people and goods such as e-bikes and scooters, which make the urban space a dynamic laboratory for mobility. Urban spaces also concentrate employment, markets, services, and attractions, which are the destinations for most trips. The concentration of human activities and ensuing density also creates the need and emphasis for space efficiency in urban environments, which is often less of a constraint in suburban or rural contexts. This mixture of transportation and mobility infrastructure and practice, combined with global urbanization trends, make urban spaces a critical focus of research for developing energy-efficient mobility systems (EEMS).

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Co-Optimization of Fuels & Engines: FY17 Year in Review

The U.S. Department of Energy (DOE) Co-Optima initiative is accelerating the introduction of efficient, clean, affordable, and scalable high-performance fuels and engines. This effort is simultaneously tackling fuel and engine research and development (R&D) to maximize light-, medium-, and heavy-duty vehicle fuel economy and performance, while mapping lower-cost pathways to reduce emissions, leveraging diverse domestic fuel resources, boosting U.S. economic productivity, and enhancing national energy security. Co-Optima brings together DOE’s Office of Energy Efficiency & Renewable Energy (EERE), nine national laboratories, 13 universities, and numerous industry and government stakeholders in a collaboration exploring solutions with potential for near-term improvements to the types of fuels and engines found in most vehicles currently on the road, as well as to the development of revolutionary new combustion technologies. This report is an overview of the research activities and accomplishments of the Co-Optima initiative during the 2017 Fiscal Year.

02 PETROLEUM↗

Co-Optimization of Fuels & Engines: FY18 Year in Review

The U.S. Department of Energy (DOE) Co-Optima initiative is accelerating the introduction of efficient, clean, affordable, and scalable high-performance fuels and engines. This first-of-its-kind effort is simultaneously tackling fuel and engine research and development (R&D) to maximize light-, medium-, and heavy-duty vehicle fuel economy and performance, while mapping lower-cost pathways to reduce emissions, leveraging diverse domestic fuel resources, boosting U.S. economic productivity, and enhancing national energy security. Co-Optima brings together DOE’s Office of Energy Efficiency & Renewable Energy (EERE), nine national laboratories, 13 universities, and numerous industry and government stakeholders in a collaboration exploring solutions with potential for near-term improvements to the types of fuels and engines found in most vehicles currently on the road, as well as potential for the development of revolutionary new engine technologies. An overview is provided of the research activities and accomplishments of the Co-Optima initiative during the 2018 Fiscal Year.

02 PETROLEUM↗

Electric Vehicle Adoption in Illinois

Over 1.3 million plug-in electric vehicles (PEVs) have been sold in the United States since 2010 when the first Chevy Volt and Nissan Leaf vehicles came on the market. Currently, electric vehicles account for about 2% of monthly light-duty vehicle (LDV) sales. More than 40 different electric vehicle models are actively being marketed, and most of these are LDVs. Over the last few years, automakers have brought more models, with varying mileage ranges, to the market, including medium-duty and heavy-duty trucks and buses. Government agencies at the federal, regional, and state levels, as well as utilities across the United States, have provided financial and non-financial incentives to promote electric vehicle adoption and charging infrastructure deployment. Argonne National Laboratory, sponsored by the U.S. Department of Energy, has developed tools and collected data to quantify the energy, economic, and environmental benefits of electric vehicles. This project has three objectives. First, we summarize the policies and other actions of the federal government, various states/regions, and utilities to promote PEV adoption, and evaluate their relative effectiveness based on a review of the literature. Second, we identify possible PEV adoption paths or scenarios that would result in PEVs making up 15% of all on-road vehicles in Illinois, and we quantify the resulting impacts on petroleum consumption and electricity demand. We also summarize the possible reduction in greenhouse gas (GHG) and criteria pollutant emissions due to PEV adoption. The PEV scenarios include private and public adoption of electric cars, light trucks (e.g., sports utility vehicles [SUVs], vans, pickups), medium-duty vehicles (MDVs), and heavy-duty vehicles (HDVs). Third, we estimate hourly charging loads of light-duty PEVs in 2030 associated with these scenarios, incorporating assumptions about vehicle electric range, efficiency, and travel behavior.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗