Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “software”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,657 records · Page 92

Microgrid Design Toolkit (MDT) Simple Use Case Example for Islanded Mode Optimization Software (V.1.1)

This simple Microgrid Design Too lkit (MDT) use case will provide you an example of a basic microgrid design. It will introduce basic principles of using the MDT islanded mode optimization by modifying a baseline microgrid design and performing an analysis of the results. Please reference the MDT User Guide (SAND2O15-85930) for detailed instructions on how to use the tool.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Microgrid Design Toolkit (MDT) User Guide Software (V.1.1)

The Microgrid Design Toolkit (MDT) most readily supports decision analysis for new ("greenfield") microgrid designs, but can also be used to evaluate microgrids with existing infrastructure under some limitations. The current version of MDT includes two main capabilities. The first capability, the Microgrid Sizing Capability (MSC), is used to determine the size and composition of a new microgrid in the early stages of the design process. MSC is focused on developing a microgrid that is economically viable when connected to the grid. The second capability is focused on refining a microgrid design for operation in islanded mode. This second capability relies on two models: the Technology Management Optimization (TMO) model and Performance Reliability Model (PRM).

24 POWER TRANSMISSION AND DISTRIBUTION↗

MULTI-PRED: A Software Module for Predictive Modeling of Coupled Multi-Physics Systems: User's Manual

This User’s Manual describes the code module MULTI-PRED, written in FORTRAN which implements the methodology for “predictive modeling of coupled multi-physics systems (PM-CMPS)” formulated by Cacuci (2014). This methodology fully takes into account the coupling terms between the systems but requires only the computational resources that would be needed to perform predictive modeling on each system separately. The PM-CMPS methodology uses the maximum entropy principle to construct an optimal approximation of the unknown a priori distribution based on a priori known mean values and uncertainties characterizing the experimental and computational parameters and results of interest responses, called for the multi-physics models under consideration. This “maximum entropy” a priori distribution is combined, using Bayes’ theorem, with the “likelihood” provided by the multi-physics simulation models to obtain a formal posterior distribution. Subsequently, the posterior distribution thus obtained is evaluated using the saddle-point method to obtain analytical expressions for the optimally predicted values for the multi-physics models parameters and responses along with corresponding reduced uncertainties. Noteworthy, the predictive modeling methodology for the coupled systems is constructed such that the systems can be considered sequentially rather than simultaneously, while preserving exactly the same results as if the systems were treated simultaneously. Consequently, very large coupled systems, which could perhaps exceed available computational resources if treated simultaneously, can be treated with the PM-CMPS methodology presented in this work sequentially and without any loss of generality or information, requiring just the resources that would be needed if the systems were treated sequentially. Three illustrative demonstration problems are also provided. The first problem presents the application of the PM-CMPS methodology to a simple particle diffusion problem which admits a closed-form analytical solution which facilitates a rapid understanding of this methodology and its predicted results. The second demonstration problem presents the application of the PM-CMPS methodology to the problem of inverse prediction, from detector responses in the presence of counting uncertainties, of the thickness of a homogeneous slab of material containing uniformly distributed gamma-emitting sources, for optically thin and thick slabs. This problem highlights the essential role played by the relative uncertainties (or, conversely, accuracies) of measured and computed responses. The third demonstration problem presents the application of the PM-CMPS methodology to the F-area cooling towers at the Savannah River National Lab. This problem demonstrates that the PM-CMPS methodology reduces the predicted response uncertainties not only at locations where measurements are available, but also at locations where measurements are not available.

97 MATHEMATICS AND COMPUTING↗

Photonic Software Defined Radio

Wireless links are the most popular form of communications with an ever-growing demand for speed. This has resulted in an overpopulated Radio Frequency (RF) spectrum with not enough bandwidth to meet demand. The two main tactics utilized by the wireless community to overcome this problem is to 1) put more data in a given bandwidth, i.e. higher spectral efficiency and 2) use the available bandwidth more efficiently by tuning the user’s channel (i.e. carrier frequency) to an unused part of spectrum. Higher spectral efficiency is achieved by using complex signals that carry information on both the in-phase (I) carrier and quadrature-phase (Q) carrier, known as Quadrature Amplitude Modulation (QAM), and increasing the number of levels on each carrier, known as the constellation size (4QAM, 16QAM etc.). However higher constellation sizes and higher bandwidth require higher fidelity RF signals. This project looked at a photonic-based high-fidelity RF amplitude and phase modulator which modulates the amplitude and phase of femtosecond laser pulses to generate relatively high-power complex microwave waveforms at carrier frequencies up to 70GHz. The goal of the feasibility study was to build a proof-of-concept system in a laboratory setting that demonstrates the photonic generation of QAM signals at electronically tunable RF carrier frequencies. Our lab prototype achieved a signal-to-noise-and-distortion (SINAD) ratio of 39dB over a 500MHz bandwidth. The signal-to-noise ratio (SNR) of the system was measured at 42dB over a 500MHz bandwidth which is on par with state-of-the-art. The main limitation to the SINAD was the inadequate pre-compensation of the electronic Digital-to-Analog Converter (eDAC) and amplifier frequency response as well as the noise of the measurement equipment. This was backed up by simulations which showed that with perfect pre compensation and using ideal measurement equipment, a noise limited SINAD of 47dB could be achieved. We also showed, through simulations, that multiple DACs could be “optically stacked” to achieve 54dB SINAD.

42 ENGINEERING↗

Enabling coordinated, distributed development of scientific software: A research agenda for adapting a team of teams approach

The “team of teams” concept is a strategy for coordinating activities within and across organizations, developed by General Stanley McChrystal and his colleagues based on their experiences leading the Joint Special Operations Task Force in Iraq from 2003-2008. These experiences, and the lessons learned from them, are recounted in the books Team of Teams (McChrystal 2015) and One Mission (Fussell 2017) (the authors and contributors to these books will hereafter be jointly referred to as McChrystal et al.). Essentially, their story is one of rapidly adapting a rigid, siloed organization to defeat the flexible, resilient, and fast-moving network of Al Qaeda in Iraq. As described in the books, when McChrystal took over the Task Force, he found a collection of highly competent, efficient teams of analysts and warfighters which nonetheless had difficulty operating in a unified manner due to close internal ties, distrust of outsiders, bureaucratic stove pipes, and cultural differences stemming from the diverse organizations Task Force teams were affiliated with, including Army Special Forces, CIA, and NSA.

97 MATHEMATICS AND COMPUTING↗

Microgrid Design Toolkit (MDT) Simple Use Case Example for Islanded Mode Optimization Software (V1.2)

This simple Microgrid Design Toolkit ( MDT ) use case will provide you an example of a basic microgrid design. It will introduce basic principles of using the MDT islanded mode optimization by modifying a baseline microgrid design and performing an analysis of the results . Please reference the MDT User Guide (SAND201-9374) for detailed instructions on how to use the tool.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Microgrid Design Toolkit (MDT) Simple Use Case Example for the Microgrid Sizing Capability Software (V1.2)

This simple Microgrid Design Toolkit (MDT) use case will provide you an example of performing microgrid sizing by identifying the types and quantities of technology to be purchased for use in a microgrid. It will introduce basic principles of using the MDT microgrid sizing capability by comparing the results of two microgrids in two different markets. Please reference the MDT User Guide (SAND2017-9374) for detailed instructions on how to use the tool.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Software Requirements Specification: Scenario bank for the storage of simulated epidemiological scenarios

North American Animal Disease Spread Model (NAADSM) and other epidemiological simulators are used to examine aspects of the impact of animal diseases, both foreign and endogenous. The inputs and results of these simulators are maintained in the form of files that can be stored in a repository for future reference. The primary goal of the proposed Scenario Bank system is to provide a common mechanism for archiving and retrieval of simulation data and subsequent analysis of that data. Secondary goals include providing support for a modeling work flow process with access restrictions, and serving as a platform where collaborators at different institutions can securely share files.

60 APPLIED LIFE SCIENCES↗

Bringing heterogeneity to the CMS software framework [Slides]

Co-processors or accelerators like GPUs and FPGAs are becoming more and more popular. CMS' data processing framework (CMSSW) implements multi-threading using Intel TBB utilizing tasks as concurrent units of work. We have developed generic mechanisms within the CMSSW framework to interact effectively with non-CPU resources and configure CPU and non-CPU algorithms in a unified way. As a first step to gain experience, we have explored mechanisms for how algorithms could offload work to NVIDIA GPUs with CUDA.

97 MATHEMATICS AND COMPUTING↗

Bringing heterogeneity to the CMS software framework [Slides]

Co-processors or accelerators like GPUs and FPGAs are becoming more and more popular. CMS’ data processing framework (CMSSW) implements multi-threading using Intel TBB utilizing tasks as concurrent units of work. We have developed generic mechanisms within the CMSSW framework to interact effectively with non-CPU resources and configure CPU and non-CPU algorithms in a unified way. As a first step to gain experience, we have explored mechanisms for how algorithms could offload work to NVIDIA GPUs with CUDA.

97 MATHEMATICS AND COMPUTING↗

Microgrid Design Toolkit (MDT) Simple Use Case Example for Islanded Mode Optimization (Software v1.3)

This simple Microgrid Design Toolkit (MDT) use case will provide you an example of a basic microgrid design. It will introduce basic principles of using the MDT islanded mode optimization by modifying a baseline microgrid design and performing an analysis of the results. Please reference the MDT User Guide (SAND2020-4550) for detailed instructions on how to use the tool.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Microgrid Design Toolkit (MDT) Simple Use Case Example for the Microgrid Sizing Capability (Software v1.3)

This simple Microgrid Design Toolkit (MDT) use case will provide you an example of performing microgrid sizing by identifying the types and quantities of technology to be purchased for use in a microgrid. It will introduce basic principles of using the MDT microgrid sizing capability by comparing the results of two microgrids in two different markets. Please reference the MDT User Guide (SAND2020-4550) for detailed instructions on how to use the tool.

24 POWER TRANSMISSION AND DISTRIBUTION↗