Engineering Papers⌕ Search

DOE OSTI · 1572630

Photonic Software Defined Radio

Abstract

Wireless links are the most popular form of communications with an ever-growing demand for speed. This has resulted in an overpopulated Radio Frequency (RF) spectrum with not enough bandwidth to meet demand. The two main tactics utilized by the wireless community to overcome this problem is to 1) put more data in a given bandwidth, i.e. higher spectral efficiency and 2) use the available bandwidth more efficiently by tuning the user’s channel (i.e. carrier frequency) to an unused part of spectrum. Higher spectral efficiency is achieved by using complex signals that carry information on both the in-phase (I) carrier and quadrature-phase (Q) carrier, known as Quadrature Amplitude Modulation (QAM), and increasing the number of levels on each carrier, known as the constellation size (4QAM, 16QAM etc.). However higher constellation sizes and higher bandwidth require higher fidelity RF signals. This project looked at a photonic-based high-fidelity RF amplitude and phase modulator which modulates the amplitude and phase of femtosecond laser pulses to generate relatively high-power complex microwave waveforms at carrier frequencies up to 70GHz. The goal of the feasibility study was to build a proof-of-concept system in a laboratory setting that demonstrates the photonic generation of QAM signals at electronically tunable RF carrier frequencies. Our lab prototype achieved a signal-to-noise-and-distortion (SINAD) ratio of 39dB over a 500MHz bandwidth. The signal-to-noise ratio (SNR) of the system was measured at 42dB over a 500MHz bandwidth which is on par with state-of-the-art. The main limitation to the SINAD was the inadequate pre-compensation of the electronic Digital-to-Analog Converter (eDAC) and amplifier frequency response as well as the noise of the measurement equipment. This was backed up by simulations which showed that with perfect pre compensation and using ideal measurement equipment, a noise limited SINAD of 47dB could be achieved. We also showed, through simulations, that multiple DACs could be “optically stacked” to achieve 54dB SINAD.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gowda, Apurva S., Chan, J. C. K.. 2019-10-30. Photonic Software Defined Radio. https://doi.org/10.2172/1572630

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related reports

Large language models for transportation research: Methodologies, state of the art, and future opportunities

The rapid rise of large language models (LLMs) is transforming transportation research, with significant advancements emerging between 2023 and 2025, a period marked by the inception and swift growth of adopting and adapting LLMs for various transportation applications. Despite these significant advancements, however, a systematic review and synthesis of the existing literature remains lacking. This paper aims to fill this gap by providing a comprehensive review of the methodologies and applications of LLMs in transportation. We explore key applications, including autonomous driving, travel behavior prediction, and general transportation-related queries, alongside LLM methodologies such as zero- or few-shot learning, prompt engineering, and fine-tuning. From the review, critical research gaps are identified. From the methodological perspective, many of the research limitations can be addressed by integrating LLMs with existing tools and refining LLM architectures. From the application perspective, research opportunities for LLMs to address various transportation challenges are also explored. By synthesizing these findings, this review not only presents the state-of-the-art LLM adoption and adaptation in transportation, but also proposes future research directions as well as insights and recommendations for policymakers and practitioners, paving the way for greater LLM-driven research innovations in transportation in the future.

42 ENGINEERING↗