Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Comparative Study”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

SDSS-IV MaNGA: How Galaxy Interactions Influence Active Galactic Nuclei

We present a comparative study of active galactic nuclei (AGN) between galaxy pairs and isolated galaxies with the final data release of the MaNGA integral field spectroscopic survey. We build a sample of 391 kinematic galaxy pairs within the footprint of the survey and select AGN using the survey's spectra. We use the comoving volume densities of the AGN samples to quantify the effects that tidal interactions have on the triggering of nuclear accretion. Our hypothesis is that the pair sample contains AGN that are triggered by not only stochastic accretion but also tidally induced accretion and correlated accretion. With the level of stochastically triggered AGN fixed by the control sample, we model the strength of tidally induced accretion and correlated accretion as a function of projected separation (r p ) and compare the model expectations with the observed volume densities of dual AGN and offset AGN (single AGN in a pair). At r p ~ 10 kpc, we find that tidal interactions induce ~30% more AGN than stochastic fueling and cause ~12% of the offset AGN to become dual AGN because of correlations. The strength of both these effects decreases with increasing r p . We also find that the [O III ] luminosities of the AGN in galaxy pairs are consistent with those found in isolated galaxies, likely because stochastically fed AGN dominate even among close pairs. Our results illustrate that while we can detect tidally induced effects statistically, it is challenging to separate tidally induced AGN and stochastically triggered AGN in interacting galaxies.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2019

Flow Characteristics of a Medium–High Carbon Mn-Si-Cr Alloyed Steel at High Temperatures

This study investigates the deformation behavior of a medium–high carbon Mn-Si-Cr alloyed steel using hot compression tests. The tests were performed on a Gleeble 1500D thermomechanical simulator with a temperature range of 950–1150 °C and a strain rate range of 0.005–5 s{sup −1}. The processing parameters (i.e., temperature T, strain rate ε-dot , and strain ε) influenced the flow softening behavior of the material. The dynamic recrystallization occurred during hot deformation. Correlations between the Zener–Hollomon parameter and the size and the volume fraction of new recrystallized grains were developed. These findings are described using mathematical models. The strain-compensated Arrhenius-type constitutive model and the multiple-linear model were developed based on the true stress–strain curves we obtained. A comparative study was performed in order to measure the validity of the two models in representing hot deformation behavior. Both models were shown to accurately predict flow stress across a range of conditions, reflecting the characteristics of true stress–strain curves by exhibiting work hardening, dynamic recovery, and dynamic recrystallization. The empirical multiple-linear mathematical model was shown to be more efficient and accurate when calculating the hot deformation behavior of steel at elevated temperatures.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Investigation of ramp injectors for supersonic mixing enhancement

A comparative study of wall mounted swept ramp injectors fitted with injector nozzles of different shape has been conducted in a constant area duct to explore mixing enhancement techniques for scramjet combustors. Six different injector nozzle inserts, all having equal exit and throat areas, were tested to explore the interaction between the preconditioned fuel jet and the vortical flowfield produced by the ramp: circular nozzle (baseline), nozzle with three downstream facing steps, nozzle with four vortex generators, elliptical nozzle, tapered-slot nozzle, and trapezoidal nozzle. The main flow was air at Mach 2, and the fuel was simulated by air injected at Mach 1.63 or by helium injected at Mach 1.7. Pressure and temperature surveys, combined with Mie and Rayleigh scattering visualization, were used to investigate the flow field. The experiments were compared with three dimensional Navier-Stokes computations. The results indicate that the mixing process is dominated by the streamwise vorticity generated by the ramp, the injectors' inner geometry having a minor effect. It was also found that the injectant/air mixing in the far-field is nearly independent of the injector geometry, molecular weight of the injectant, and the initial convective Mach number.

Haimovitch, Y.↗
DOE OSTI2015

Dosimetric characteristics of the novel 2D ionization chamber array OCTAVIUS Detector 1500

Purpose: The dosimetric properties of the OCTAVIUS Detector 1500 (OD1500) ionization chamber array (PTW-Freiburg, Freiburg, Germany) have been investigated. A comparative study was carried out with the OCTAVIUS Detector 729 and OCTAVIUS Detector 1000 SRS arrays. Methods: The OD1500 array is an air vented ionization chamber array with 1405 detectors in a 27 × 27 cm{sup 2} measurement area arranged in a checkerboard pattern with a chamber-to-chamber distance of 10 mm in each row. A sampling step width of 5 mm can be achieved by merging two measurements shifted by 5 mm, thus fulfilling the Nyquist theorem for intensity modulated dose distributions. The stability, linearity, and dose per pulse dependence were investigated using a Semiflex 31013 chamber (PTW-Freiburg, Freiburg, Germany) as a reference detector. The effective depth of measurement was determined by measuring TPR curves with the array and a Roos chamber type 31004 (PTW-Freiburg, Freiburg, Germany). Comparative output factor measurements were performed with the array, the Semiflex 31010 ionization chamber and the Diode 60012 (both PTW-Freiburg, Freiburg, Germany). The energy dependence of the OD1500 was measured by comparing the array’s readings to those of a Semiflex 31010 ionization chamber for varying mean photon energies at the depth of measurement, applying to the Semiflex chamber readings the correction factor k{sub NR} for nonreference conditions. The Gaussian lateral dose response function of a single array detector was determined by searching the convolution kernel suitable to convert the slit beam profiles measured with a Diode 60012 into those measured with the array’s central chamber. An intensity modulated dose distribution measured with the array was verified by comparing a OD1500 measurement to TPS calculations and film measurements. Results: The stability and interchamber sensitivity variation of the OD1500 array were within ±0.2% and ±0.58%, respectively. Dose linearity was within 1% over the range from 5 to 1000 MU. The effective point of measurement of the OD1500 for dose measurements in RW3 phantoms was determined to be (8.7 ± 0.2) mm below its front surface. Output factors showed deviations below 1% for field sizes exceeding 4 × 4 cm{sup 2}. The dose per pulse dependence was smaller than 0.4% for doses per pulse from 0.2 to 1 mGy. The energy dependence of the array did not exceed ±0.9%. The parameter σ of the Gaussian lateral dose response function was determined as σ{sub 6MV} = (2.07 ± 0.02) mm for 6 MV and σ{sub 15MV} = (2.09 ± 0.02) mm for 15 MV. An IMRT verification showed passing rates well above 90% for a local 3 mm/3% criterion. Conclusions: The OD1500 array’s dosimetric properties showed the applicability of the array for clinical dosimetry with the possibility to increase the spatial sampling frequency and the coverage of a dose distribution with the sensitive areas of ionization chambers by merging two measurements.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS2021

Investigating the potential of a global precipitation forecast to inform landslide prediction

Extreme rainfall events within landslide-prone areas can be catastrophic, resulting in loss of property, infrastructure, and life. A global Landslide Hazard Assessment for Situational Awareness (LHASA) model provides routine near-real time estimates of landslide hazard using Integrated Multi-Satellite Precipitation Retrievals for the Global Precipitation Mission (IMERG). However, it does not provide information on potential landslide hazard in the future. Forecasting potential landslide events at a global scale presents an area of open research. This study compares a global precipitation forecast provided by NASA's Goddard Earth Observing System (GEOS) with near-real time satellite precipitation estimates. The Multi-Radar Multi-Sensor gauge corrected (MRMS-GC) reference is used to assess the performance of both satellite and model-based precipitation products over the contiguous United States (CONUS). The forecast lead time of 24hrs is considered, with a focus on extreme precipitation events. The performance of IMERG and GEOS-Forecast products is assessed in terms of the probability of detection, success ratio, critical success index and hit bias as well as continuous statistics. The results show that seasonality influences the performance of both satellite and model-based precipitation products. Comparison of IMERG and GEOS-Forecast globally as well as in several event case studies (Colombia, southeast Asia, and Tajikistan) reveals that GEOS-Forecast detects extreme rainfall more frequently relative to IMERG for these specific analyses. For recent landslide points across the globe, the 24hr accumulated precipitation forecast >100 mm corresponds well with near-real time daily accumulated IMERG precipitation estimates. GEOS-Forecast and IMERG precipitation match more closely for tropical cyclones than for other types of storms. The main intention of this study is to assess the viability of using a global forecast for landslide predictions and understand the extent of the variability between these products to inform where we would expect the landslide modeling results to most prominently diverge. Results of this study will be used to inform how forecasted precipitation estimates can be incorporated into the LHASA model to provide the first global predictive view of landslide hazards.

S. Khan↗
NASA NTRS2021

Investigating the Potential of A Global Precipitation Forecast to Inform Landslide Prediction

Extreme rainfall events within landslide-prone areas can be catastrophic, resulting in loss of property, infra-structure, and life. A global Landslide Hazard Assessment for Situational Awareness (LHASA) model provides routine near-real time estimates of landslide hazard using Integrated Multi-Satellite Precipitation Retrievals for the Global Precipitation Mission (IMERG). However, it does not provide information on potential landslide hazard in the future. Forecasting potential landslide events at a global scale presents an area of open research. This study compares a global precipitation forecast provided by NASA’s Goddard Earth Observing System (GEOS) with near-real time satellite precipitation estimates. The Multi-Radar Multi-Sensor gauge corrected (MRMS-GC) reference is used to assess the performance of both satellite and model-based precipitation products over the contiguous United States (CONUS). The forecast lead time of 24hrs is considered, with a focus on extreme precipitation events. The performance of IMERG and GEOS-Forecast products is assessed in terms of the probability of detection, success ratio, critical success index and hit bias as well as continuous statistics. The results show that seasonality influences the performance of both satellite and model-based precipitation products. Comparison of IMERG and GEOS-Forecast globally as well as in several event case studies (Colombia, southeast Asia, and Tajikistan) reveals that GEOS-Forecast detects extreme rainfall more frequently relative to IMERG for these specific analyses. For recent landslide points across the globe, the 24hr accumulated precipitation forecast >100 mm corresponds well with near-real time daily accumulated IMERG precipitation estimates. GEOS-Forecast and IMERG precipitation match more closely for tropical cyclones than for other types of storms. The main intention of this study is to assess the viability of using a global forecast for landslide predictions and understand the extent of the variability between these products to inform where we would expect the landslide modeling results to most prominently diverge. Results of this study will be used to inform how forecasted precipitation estimates can be incorporated into the LHASA model to provide the first global predictive view of landslide hazards.

S. Khan↗
DOE OSTI2014

Volumetric modulated arc therapy versus step-and-shoot intensity modulated radiation therapy in the treatment of large nerve perineural spread to the skull base: a comparative dosimetric planning study

Cutaneous squamous cell carcinoma with large nerve perineural (LNPN) infiltration of the base of skull is a radiotherapeutic challenge given the complex target volumes to nearby organs at risk (OAR). A comparative planning study was undertaken to evaluate dosimetric differences between volumetric modulated arc therapy (VMAT) versus intensity modulated radiation therapy (IMRT) in the treatment of LNPN. Five consecutive patients previously treated with IMRT for LNPN were selected. VMAT plans were generated for each case using the same planning target volumes (PTV), dose prescriptions and OAR constraints as IMRT. Comparative parameters used to assess target volume coverage, conformity and homogeneity included V95 of the PTV (volume encompassed by the 95% isodose), conformity index (CI) and homogeneity index (HI). In addition, OAR maximum point doses, V20, V30, non-target tissue (NTT) point max doses, NTT volume above reference dose, monitor units (MU) were compared. IMRT and VMAT plans generated were comparable for CI (P = 0.12) and HI (P = 0.89). VMAT plans achieved better V95 (P = < 0.001) and reduced V20 and V30 by 652 cubic centimetres (cc) (28.5%) and 425.7 cc (29.1%), respectively. VMAT increased MU delivered by 18% without a corresponding increase in NTT dose. Compared with IMRT plans for LNPN, VMAT achieved comparable HI and CI.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2026

Heavy-Duty Nonroad Material Handler Electrification Part 2: Energy Efficiency and Performance Evaluation

Decarbonization efforts achieved through electrification in nonroad mobile machinery can realize a reduction in fuel consumption of more than 20%, thanks to concepts familiar to light-duty passenger vehicles. This case study compares the results of a hybrid-electric material handler to its conventional counterpart, utilizing machine-specific drive cycles presented in part one of this paper series. The hybrid prototype features an extended-range electric vehicle (EREV) powertrain that demonstrated substantial energy efficiency improvements. Specifically, there was a reduction in equivalent fuel consumption of 75% when operating in electric-only mode, and 33% when maintaining the battery by charging with an on-board generator. Together, the efficiency improvements can be extrapolated over a low-intensity, 8-h shift characterized by significant idle time and highly dynamic engine load for a 47% reduction in net energy consumption. Key technologies that led to this improvement included engine downsizing and decoupling, regenerative braking, and an electrohydraulic pump unit with advanced controls. Finally, his study explains details of the powertrain architecture and subsystems that were implemented on a demonstration vehicle, control strategies used to meet project goals, and an analysis of energy consumption from testing on a closed course. Also included in this study is a discourse on comparison metrics that can be used for quantifying the energy consumption differences between hybrid-electric and conventional diesel powertrains in nonroad mobile machinery.

25 ENERGY STORAGE↗
DOE OSTI2020

Optimal conditions for efficient flow-electrode capacitive deionization

One of the current barriers to achieving fast and stable performance for flow-electrode capacitive deionization (FCDI) is determining optimal operating parameters. To date, however, no consensus has been reached for universal conditions for FCDI. Through experimental and modeling approaches in this study, we systematically evaluated the influence of applied potential (V = 1.2–2.4 V) and electrolyte concentration (C0 = 0.05–0.5 M) on the FCDI and electrodialysis (ED) desalination processes. Evaluation indicators include the concentration decrease in the desalinated solution, salt removal rates, pH fluctuations, charge efficiency, and energy consumption. Results demonstrated that the dynamic curves of concentration decrease at 2.0 V nearly overlapped with the response at 1.6 V at certain electrolyte concentrations, while the salt removal rates at 0.2 M salt concentration were the best among all concentrations tested at a range of applied potential. Therefore, it was thus concluded that the optimum conditions for FCDI operation are 1.6 V applied potential and 0.2 M initial salt concentration, under which faradaic reactions are not being triggered, and concentration polarization does not significantly affect ion transfer. Furthermore, a comparative study between FCDI and ED indicated that ED has a different dependence on the electrolyte concentration and applied potential, in which the desalination can be linearly enhanced with increasing potential but greatly limited at high concentrations. Due to the presence of carbon particles in FCDI, the enhanced charge/ion transfer is probably the main reason for the different desalination performance of FCDI and ED. Overall, the optimal operating parameters obtained in this work could be used as basic test conditions for further development of new carbon-based materials for FCDI.

42 ENGINEERING↗
DOE OSTI2014

VALIDATING SOLAR WIND PREDICTION USING THE CURRENT SHEET SOURCE SURFACE MODEL

We have carried out a comparative study of the predicted solar wind based on the flux tube expansion factor computed using the current sheet source surface (CSSS) model and the potential field source surface (PFSS) model, with the aim of determining whether the CSSS model represents the solar wind sources better than the PFSS model. For this, we obtained the root mean square errors (RMSEs) and the correlation coefficients between the observed solar wind speed and that predicted by the models, the ratio of RMSEs between the two models, and a skill score. On average, the CSSS predictions are more accurate than the PFSS predictions by a factor of 1.6, taking RMSE as the metric of accuracy. The RMSEs increased as the solar cycle progressed toward maximum, indicating the difficulty in modeling the corona as the global field becomes more complex. We also compared the WSA/ENLIL predictions for a few Carrington rotations; the Wang-Sheeley-Arge (WSA) model makes use of the PFSS extrapolations to model the wind source. We found that the average value of RMSE ratio between the CSSS and the WSA/ENLIL predictions was about 1.9, implying that the CSSS predictions are nearly twice better than the WSA/ENLIL predictions, despite the simplicity of the CSSS model compared to ENLIL. We conclude, based on the present analysis, that the CSSS model is a valid proxy for solar wind measurements and that it improves upon existing commonly used methods of wind prediction or proxy analysis.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Broadband Ultrafast Dynamics of Refractory Metals: TiN and ZrN

Transition metal nitrides have recently gained attention in the fields of plasmonics, plasmon-enhanced photocatalysis, photothermal applications, and nonlinear optics because of their suitable optical properties, refractory nature, and large laser damage thresholds. Here we report comparative studies of the transient response of films of titanium nitride (TiN), zirconium nitride (ZrN), and gold (Au) under femtosecond excitation. Broadband transient optical characterization helps to adjudicate earlier, somewhat inconsistent reports regarding hot electron lifetimes based upon single wavelength measurements. These pump–probe experiments show sub-picosecond transient dynamics only within the epsilon-near-zero window of the refractory metals. The dynamics are dominated by photoinduced interband transitions resulting from ultrafast electron energy redistribution. The enhanced reflection modulation in the epsilon-near-zero window makes it possible to observe the ultrafast optical response of these films at low pump fluences. These results indicate that electron–phonon coupling in TiN and ZrN is 25–100 times greater than in Au. Strong electron–phonon coupling drives the sub-picosecond optical response and facilitates greater lattice heating compared to Au, making TiN and ZrN promising for photothermal applications. The spectral response and dynamics of TiN and ZrN are only weakly sensitive to pump fluence and pump excitation energy. However, the magnitude of the response is much greater at higher pump photon energies and higher fluences, reaching peak observed values of 15% in TiN and 50% in ZrN in the epsilon-near-zero window.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Multi-Semester Mentoring and GPA Trajectories in SPINS: A Longitudinal Program Evaluation of STEM Scholars

This exploratory longitudinal program evaluation examined GPA trajectories among 14 STEM scholars participating in the Scholarly Partnership in Nuclear Security (SPINS) mentoring program at an HBCU. Using de-identified administrative data (37 scholar-semester observations), the study compared baseline and latest term GPAs anchored to each scholar’s first funded semester. A Wilcoxon signed-rank test was used to assess within-student change. Mean GPA increased modestly from 3.46 (SD = 0.30) at baseline to 3.61 (SD = 0.33) at the latest observed semester, with 12 of 14 scholars (85.7%) showing net improvement (median change = +0.12). The Wilcoxon signed-rank test indicated a statistically significant positive shift (W = 18, p = 0.030). However, scholars entered the program with a high baseline GPA, and ceiling effects were evident for several participants. Grounded in Social Cognitive Career Theory, findings suggest that multi-semester participation in SPINS is associated with GPA stability and modest improvement in an already high-performing cohort. Results should be interpreted cautiously given the small sample size and single-group design. The study highlights the value of sustained, culturally responsive mentoring at an HBCU while underscoring the need for larger evaluations with comparison cohorts and broader psychosocial outcomes. An evidence-informed mentoring framework is proposed to strengthen multi-semester support.

42 ENGINEERING↗
DOE OSTI2021

Flume and single-pass washing systems for fresh-cut produce processing: Disinfection by-products evaluation

Free chlorine is widely used in fresh-cut produce washing to minimize microbial cross-contamination, but its application can also lead to the formation of harmful disinfection byproducts (DBPs). This study compared DBPs in process water and washed produce during commercial operation. Samples of shredded lettuce and diced cabbages washed in chlorinated water in the traditional double-flume wash and novel immersion-free single-pass wash systems were collected at multiple time points and locations from the processing lines. A suite of 33 conventional and emerging DBPs, including 4 trihalomethanes (THMs), 9 haloacetic acids (HAAs), 9 nitrogenous DBPs (N-DBPs), and 11 carbonaceous DBPs (C-DBPs), were investigated. Overall, N-DBPs and HAAs dominated the concentration of detected DBPs. Wash water in the flumes contained 7–111 folds higher DBP levels compared to that in the single-pass system, with the abundance of DBPs following the order of N-DBPs > HAAs > C-DBPs > THMs. DBPs were detected on washed produce, presenting primarily in the forms of N-DBPs and HAAs followed by C-DBPs and THMs. While higher levels of DBPs were detected in flume-washed produce, the final potable water rinse significantly reduced the DBP concentration in these products. The concentrations of THMs and HAAs on these washed products were used to estimate potential exposure via consumption of fresh-cut produce and the levels were below the daily allowable exposure for drinking water standard established by the U.S. Environmental Protection Agency. The detected high concentration and potential toxicity of N-DBPs indicate the need for further research. Here, the findings of this study advance the understanding of the formation and removal of DBPs during wash processes, and identify additional research opportunities for further reduction in DBPs and food safety improvement.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

Optimizing transmit field inhomogeneity of parallel RF transmit design in 7T MRI using deep learning

Ultrahigh field (UHF) Magnetic Resonance Imaging (MRI) provides a higher signal-to-noise ratio and, thereby, higher spatial resolution. However, UHF MRI introduces challenges such as transmit radiofrequency (RF) field (B+1) inhomogeneities, leading to uneven flip angles and image intensity anomalies. These issues can significantly degrade imaging quality and its medical applications. This study addresses B+1 field homogeneity through a novel deep learning-based strategy. Traditional methods like Magnitude Least Squares (MLS) optimization have been effective but are time-consuming and dependent on the patient’s presence. Recent machine learning approaches, such as RF Shim Prediction by Iteratively Projected Ridge Regression and deep learning frameworks, have shown promise but face limitations like extensive training times and oversimplified architectures. We propose a two-step deep learning strategy. First, we obtain the desired reference RF shimming weights from multi-channel B+1 fields using random-initialized Adaptive Moment Estimation. Then, we employ Residual Networks (ResNets) to train a model that maps B+1 fields to target RF shimming outputs. Our approach does not rely on pre-calculated reference optimizations for the testing process and efficiently learns residual functions. Comparative studies with traditional MLS optimization demonstrate our method’s advantages in terms of speed and accuracy. The proposed strategy achieves a faster and more efficient RF shimming design, significantly improving imaging quality at UHF. This advancement holds potential for broader applications in medical imaging and diagnostics.

Lu, Zhengyi [Vanderbilt University]↗
NASA NTRS1993

Plasma-puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for an azimuthally uniform surface flashover which initiates plasma-puff under wide ranges of fill gas pressures of Ar, He and N2. The optimal fill gas pressures for the azimuthally uniform plasma-puff were about 120 mTorr less than P(opt) less than 450 Torr for He and N2. For Argon 120 mTorr less than P(opt) less than 5 Torr for argon. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with hypocycloidal pinch plasma-puff triggering. The main discharge of the inverse pinch switch with the plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with the hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr. In order to assess the effects of plasma current density on material erosion of electrodes, emissions from both an inverse-pinch plasma switch (INPIStron) and from a spark gap switch under test were studied with an optical multichannel analyzer (OMA). The color temperature of the argon plasma was approximately 4,000 K which corresponded with the peak continuum emission near 750 nm. There are the strong line emissions of argon in the 650 - 800 nm range and a lack of line emissions of copper and other solid material used in the switch. This indicates that the plasma current density during closing is low and the hot spot or hot filament in the switch is negligible. This result also indicates considerable reduction of line emission with the INPIStron switch over that of a spark-gap switch. However, a strong carbon line emission exists due to vaporization of the plastic insulator used. In order to reduce the vaporization of the insulator, the plexiglass insulating material of INPIStron was replaced with Z-9 material. A comparative study of the INPIStron and a spark gap also reveals that the INPIStron, with a low impedance of Z equals 9 ohms, can transfer a high voltage pulse with a superior pulse-shape fidelity over that of a spark gap with Z equals 100 ohms.

Venable, D. D.↗
NASA NTRS1993

Plasma-puff initiation of high Coulomb transfer switches

The plasma-puff triggering mechanism based on a hypocycloidal pinch geometry was investigated to determine the optimal operating conditions for an azimuthally uniform surface flashover which initiates plasma-puff under wide ranges of fill gas pressures of Ar, He and N2. The optimal fill gas pressures for the azimuthally uniform plasma-puff were about 120 mTorr less than P(sub opt) less than 450 Torr for He and N2. For Argon 20 mTorr is less than P(sub opt) is less than 5 Torr. The inverse pinch switch was triggered with the plasma-puff and the switching capability under various electrical parameters and working gas pressures of Ar, He and N2 was determined. It was also shown that the azimuthally uniform switching discharges were dependent on the type of fill gas and its fill pressure. A new concept of plasma-focus driven plasma-puff was also discussed in comparison with hypocycloidal pinch plasma-puff triggering. The main discharge of the inverse pinch switch with the plasma-focus driven plasma-puff trigger is found to be more azimuthally uniform than that with the hypocycloidal pinch plasma-puff trigger in a gas pressure region between 80 mTorr and 1 Torr. In order to assess the effects of plasma current density on material erosion of electrodes, emissions from both an inverse-pinch plasma switch (INPIStron) and from a spark gap switch under test were studied with an optical multichannel analyzer (OMA). The color temperature of the argon plasma was approximately 4,000 K which corresponded with the peak continuum emission near 750 nm. There are the strong line emissions of argon in the 650 - 800 nm range and a lack of line emissions of copper and other solid material used in the switch. This indicates that the plasma current density during closing is low and the hot spot or hot filament in the switch is negligible. This result also indicates considerable reduction of line emission with the INPIStron switch over that of a spark-gap switch. However, a strong carbon line emission exists due to vaporization of the plastic insulator used. In order to reduce the vaporization of the insulator, the plexiglass insulating material of INPIStron was replaced with Z-9 material. A comparative study of the INPIStron and a spark gap also reveals that the INPIStron, with a low impedance of Z = 9 ohms, can transfer a high voltage pulse with a superior pulse-shape fidelity over that of a spark gap with Z = 100 ohms.

Han, Kwang S.↗
DOE OSTI2022

Radon-222 Charcoal Canister Steady State Model Calibrations Performed in a Highly Controlled Environmental Chamber and a Natural Indoor Environment

Charcoal canisters are a common method of 222 Rn screening. The calibrations of different batches of activated charcoal used in different canister designs are typically performed in large volume controlled environmental chambers with known and controlled radon concentration, temperature, and humidity. Radon screening could be facilitated in locations without ready access to environmental chambers if canisters could be accurately calibrated and undergo quality control in less controlled environments. This study compares charcoal canister calibrations from a highly controlled radon chamber with calibrations from a basement storage area experiencing temporally varying radon. In addition, the impacts of exposure time and spectral region of interest selection on calibration accuracy are investigated by comparing calibrations calculated using three different choices. Approximately 30 mo after calibrations were completed, groups of canisters were exposed for different durations of time to investigate measurement accuracy and calibration validity over an extended time. A digital simulation of charcoal canister kinetics was also performed to establish limits on how stable radon must be in a space for equilibrium-based calibration to be performed there. Overall, the accuracy of measurements using calibrations from each space differed by less than 10% after 2 d exposure time, showing that carefully controlled conditions are not necessary for the accurate calibration of charcoal canisters. Furthermore, measurement accuracy differed by less than 2% for different spectral region selections. Accuracy improved slightly with canister exposure duration. Simulations suggest that radon instability is most tolerable near the beginning of canister calibration exposures, but this merits further experimental study.

07 ISOTOPE AND RADIATION SOURCES↗
NASA NTRS1979

Computational simulation of corotational vortex merger using 0, 1, and 2 equation turbulence models

A computational study has been conducted to gain a better understanding of the role of turbulence in the merger of corotating vortices and in the decay of a single vortex. The flow field is simulated by using an inviscid flow model and zero-, one-, and two-equation turbulent-flow models. An implicit finite-difference procedure is employed to integrate the unsteady, two-dimensional, incompressible flow equations in a cross-plane. In the zero- and one-equation models, a spatially varying mixing-length model that simulates the streamline curvature effect is used to define an eddy viscosity. The computational merging distance criterion is in good agreement with the experimental one. In the case of the two-equation model, the turbulent kinetic energy and a modified rate of dissipation equation incorporating a curvature correction term are solved. A comparative study of the computational results corresponding to the various flow models and the available experimental data is presented.

Raj, P.↗