Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Atomic Interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,621 records · Page 90
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Hierarchical TiO 2 :Cu 2 O Nanostructures for Gas/Vapor Sensing and CO 2 Sequestration

We investigate the effect of high-surface-area self-assembled TiO 2 :Cu 2 O nanostructures for CO 2 and relative humidity gravimetric detection using polyethylenimine (PEI), 1-ethyl-3-methylimidazolium (EMIM), and polyacrylamide (PAAm). Introduction of hierarchical TiO 2 :Cu 2 O nanostructures on the surface of quartz crystal microbalance sensors is found to significantly improve sensitivity to CO 2 and to H 2 O vapor. The response of EMIM to CO 2 increases fivefold for 100 nm-thick TiO 2 :Cu 2 O as compared to gold. At ambient CO 2 concentrations, the hierarchical assembly operates as a sensor with excellent reversibility, while at higher pressures, the CO 2 desorption rate decreases, suggesting possible application for CO 2 sequestration under these conditions. The gravimetric response of PEI to CO 2 increases by a factor of 3 upon introduction of a 50 nm TiO 2 :Cu 2 O layer. The PAAm gravimetric response to water vapor also increases by a factor of 3 and displays improved reversibility with the addition of 50 nm TiO 2 :Cu 2 O structures. We found that TiO 2 :Cu 2 O can be used to lower the detection limits for CO 2 sensing with EMIM and PEI and lower the detection limits for H 2 O sensing with PAAm by over a factor of 2. Coarse-grained and all-atom molecular dynamics simulations indicate the dissociative character of ionic liquid assembly on TiO 2 :Cu 2 O interfaces and different distributions of CO 2 and H 2 O molecules on bare and ionic liquid-coated surfaces, confirming experimental observations. Overall, our results show high potential of hierarchical assemblies of TiO 2 :Cu 2 O/room temperature ionic liquid and polymer films for sensors and CO 2 sequestration.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Feature engineering descriptors, transforms, and machine learning for grain boundaries and variable-sized atom clusters

Abstract Obtaining microscopic structure-property relationships for grain boundaries is challenging due to their complex atomic structures. Recent efforts use machine learning to derive these relationships, but the way the atomic grain boundary structure is represented can have a significant impact on the predictions. Key steps for property prediction common to grain boundaries and other variable-sized atom clustered structures include: (1) describing the atomic structure as a feature matrix, (2) transforming the variable-sized feature matrix to a fixed length common to all structures, and (3) applying a machine learning algorithm to predict properties from the transformed matrices. We examine how these steps and different combinations of engineered features impact the accuracy of grain boundary energy predictions using a database of over 7000 grain boundaries. Additionally, we assess how different engineered features support interpretability, offering insights into the physics of the structure-property relationships.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Coarse-grained molecular dynamics simulation of the interface behaviour and self-assembly of CTAB cationic surfactants

Here, we study the behaviour at interfaces and the micelle self-assembly of a cationic surfactant (CTAB) by Molecular Dynamics (MD) simulations of coarse-grained models. We consider both the standard (with explicit water) Martini force field and the implicit solvent version of the Martini force field (Dry Martini). First, we study the behaviour of CTAB at a water/vacuum interface, at a water/organic solvent interface and in a pre-assembled CTAB micelle using both standard and Dry Martini and all-atomic simulations. Our results indicate that there are significant quantitative differences between the predictions of the two models. Interestingly, implicit solvent simulations with Dry Martini show good quantitative agreement with all-atomic MD simulations, better than explicit solvent Martini MD simulations. The computational efficiency of the Martini and Dry Martini models allowed us to study the self-assembly of CTAB in a large system with many micelles. We observe the self-assembly of CTAB into micelles and also the exchange of CTAB molecules between micelles by events such as micelle fusion and fission which are difficult to observe in all-atomic MD simulations due to the time and length scales involved. Under the studied conditions, both Martini models predict a rather different self-assembly behaviour. The standard Martini model predicts a final equilibrium state with spherical micelles with an average size of ≈70 CTAB molecules. In contrast, the Dry Martini model predicts the formation of large tubular micelles with ≈330 CTAB molecules. Compared with experiments, standard Martini and Dry Martini underestimate and overestimate, respectively, the micelle size.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

On interfacial properties of tetrahydrofuran: Atomistic and coarse-grained models from molecular dynamics simulation

We have determined the interfacial properties of tetrahydrofuran (THF) from direct simulation of the vapor-liquid interface. The molecules are modeled using six different molecular models, three of them based on the united-atom approach and the other three based on a coarse-grained (CG) approach. In the first case, THF is modeled using the transferable parameters potential functions approach proposed by Chandrasekhar and Jorgensen [J. Chem. Phys. 77, 5073 (1982)] and a new parametrization of the TraPPE force fields for cyclic alkanes and ethers [S. J. Keasler et al., J. Phys. Chem. B 115, 11234 (2012)]. In both cases, dispersive and coulombic intermolecular interactions are explicitly taken into account. In the second case, THF is modeled as a single sphere, a diatomic molecule, and a ring formed from three Mie monomers according to the SAFT-γ Mie top-down approach [V. Papaioannou et al., J. Chem. Phys. 140, 054107 (2014)]. Simulations were performed in the molecular dynamics canonical ensemble and the vapor-liquid surface tension is evaluated from the normal and tangential components of the pressure tensor along the simulation box. In addition to the surface tension, we have also obtained density profiles, coexistence densities, critical temperature, density, and pressure, and interfacial thickness as functions of temperature, paying special attention to the comparison between the estimations obtained from different models and literature experimental data. The simulation results obtained from the three CG models as described by the SAFT-γ Mie approach are able to predict accurately the vapor-liquid phase envelope of THF, in excellent agreement with estimations obtained from TraPPE model and experimental data in the whole range of coexistence. However, Chandrasekhar and Jorgensen model presents significant deviations from experimental results. We also compare the predictions for surface tension as obtained from simulation results for all the models with experimental data. The three CG models predict reasonably well (but only qualitatively) the surface tension of THF, as a function of temperature, from the triple point to the critical temperature. On the other hand, only the TraPPE united-atoms models are able to predict accurately the experimental surface tension of the system in the whole temperature range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Formation of a Ti–Cu(111) single atom alloy: Structure and CO binding

A single atom Ti–Cu(111) surface alloy can be generated by depositing small amounts of Ti onto Cu(111) at slightly elevated surface temperatures (~500 to 600 K). Here, scanning tunneling microscopy shows that small Ti-rich islands covered by a Cu single layer form preferentially on ascending step edges of Cu(111) during Ti deposition below about 400 K but that a Ti–Cu(111) alloy replaces these small islands during deposition between 500 and 600 K, producing an alloy in the brims of the steps. Larger partially Cu-covered Ti-containing islands also form on the Cu(111) terraces at temperatures between 300 and 700 K. After surface exposure to CO at low temperatures, reflection absorption infrared spectroscopy (RAIRS) reveals distinct C–O stretch bands at 2102 and 2050 cm –1 attributed to CO adsorbed on Cu-covered Ti-containing domains vs sites in the Ti–Cu(111) surface alloy. Calculations using density functional theory (DFT) suggest that the lower frequency C–O stretch band originates specifically from CO adsorbed on isolated Ti atoms in the Ti–Cu(111) surface alloy and predicts a higher C–O stretch frequency for CO adsorbed on Cu above subsurface Ti ensembles. DFT further predicts that CO preferentially adsorbs in flat-lying configurations on contiguous Ti surface structures with more than one Ti atom and thus that CO adsorbed on such structures should not be observed with RAIRS. The ability to generate a single atom Ti–Cu(111) alloy will provide future opportunities to investigate the surface chemistry promoted by a representative early transition metal dopant on a Cu(111) host surface.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

LibERI—A portable and performant multi-GPU accelerated library for electron repulsion integrals via OpenMP offloading and standard language parallelism

A portable and performant graphics processing unit (GPU)-accelerated library for electron repulsion integral (ERI) evaluation, named LibERI, has been developed and implemented via directive-based (e.g., OpenMP and OpenACC) and standard language parallelism (e.g., Fortran DO CONCURRENT). Offloaded ERIs consist of integrals over low and high contraction s, p, and d functions using the rotated-axis and Rys quadrature methods. GPU codes are factorized based on previous developments with two layers of integral screening and quartet presorting. In this work, the density screening is moved to the GPU to enhance the computational efficacy for large molecular systems. Here, the L-shells in the Pople basis set are also separated into pure S and P shells to increase the ERI homogeneity and reduce atomic operations and the memory footprint. LibERI is compatible with any quantum chemistry drivers supporting the MolSSI Driver Interface. Benchmark calculations of LibERI interfaced with the GAMESS software package were carried out on various GPU architectures and molecular systems. The results show that the LibERI performance is comparable to other state-of-the-art GPU-accelerated codes (e.g., TeraChem and GMSHPC) and, in some cases, outperforms conventionally developed ERI CUDA kernels (e.g., QUICK) while fully maintaining portability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

An automatic multi-precursor flow-type atomic layer deposition system

Designs for two automated atomic layer deposition (ALD) flow reactors are presented, and their capabilities for coating additively manufactured (AM) metal prints are described. One instrument allows the coating of several AM parts in batches, while the other is useful for single part experiments. To demonstrate reactor capabilities, alumina (Al 2 O 3 ) was deposited onto AM 316L stainless steel by dosing with water (H 2 O) vapor and trimethylaluminum (TMA) and purging with nitrogen gas (N 2 ). Both instruments are controlled by custom-programmed LabVIEW software that enables in situ logging of temperature, total pressure, and film thickness using a quartz crystal microbalance. An initial result shows that 150 ALD cycles led to a film thickness of ~55 nm, which was verified with Rutherford backscattering spectroscopy. This indicates that the reactors were indeed depositing single atomic layers of Al 2 O 3 per ALD cycle, as intended.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Spray: Sparse Reductions of Arrays in OPEN MP

We present SPRAY, an open-source header-only C++ library for sparse reductions of arrays. SPRAY is meant for applications in which a large array is collaboratively updated by multiple threads using an associative and commutative operation such as +=. Especially when each thread accesses only parts of the array, SPRAY can perform significantly better than OPENMP's built-in reduction clause or atomic updates, while also using less memory than the former. SPRAY provides both an easy-to-use interface that can serve as a drop-in replacement for OPENMP reductions and a selection of reducer objects that accumulate the final result in different thread-safe ways. We demonstrate SPRAY through multiple test cases including the LULESH shock hydrodynamics code and a transpose-matrix-vector multiplication for sparse matrices stored in CSR format. SPRAY reductions outperform built-in OPENMP reductions consistently, in some cases improving run time and memory overhead by 20X, and even beating domain-specific approaches such as Intel MKI, by over 2X in some cases. Furthermore, SPRAY reductions have a minimal impact on the code base, requiring only a few lines of source code changes. Once in place, SPRAY reduction schemes can be switched easily, allowing performance portability and tuning opportunities by separating performance-critical implementation details from application code.

OpenMP↗
DOE OSTI2019

Spontaneous Relaxation through Graphene Suggests an Alternative Strain Relaxation Mechanism in Heteroepitaxy

While conventional epitaxy produces high-quality epitaxial layers, the limited set of commercially available wafers restricts the number of material choice that can be grown through epitaxy. To extend the set of epi-materials, heteroepitaxy has been widely used although the epi-materials have severe lattice mismatch from wafers. The problem of heteroepitaxy of the lattice mismatched systems is that introducing dislocations is unavoidable because of the strain energy built up in epitaxial layers exceeds the threshold energy value to create dislocation. As the dislocations significantly reduce the materials’ properties, people have put intensive effort into finding a new way to resolve this issue. Here, we introduce a new strain relaxation approach which can efficiently engineer the lattice with minimizing dislocation formation. Remote epitaxy allows single-crystalline growths on graphene-coated substrates as atomic potential field guides atomic registry through graphene while weakening binding energy of epilayer to the substrate. We discovered that this weakened interface offers a new pathway for strain relaxation during epitaxy in the lattice mismatched systems. While conventional heteroepitaxy relaxes accumulated strain energy through involving misfit dislocations, heteroepitaxy on graphene-coated substrates spontaneously relaxes its strain minimizing dislocation density. Thus, at the same thickness and misfit strain, the epilayer grown on graphene-coated substrates shows full relaxation with substantially reduced dislocations while that by conventional heteroepitaxy exhibits slight relaxation with full of dislocations. It means that full of strain relaxation at much lower thickness is available through this approach. We strongly believe that our strategy allows broadening range of available semiconductors through epitaxy, which could lead high performance electronic and photonics.

Bae, Sang-Hoon↗
NASA NTRS1976

On a model of calculating bond strength

Diffusion bonding is a fabricating process to join the fibers and a matrix together forming a composite. The efficiency of the bonding process depends on temperature, time, and pressure. Based on a simplified pair potential model, an expression for the bond-energy at the fiber-matrix interface is formulated in terms of the above-mentioned three parameters. From this expression and the mean atomic distance, the bond-strength between the fibers and the matrix can be calculated.

Yue, A. S.↗
DOE OSTI2018

Electron-stimulated reactions in nanoscale water films adsorbed on (alpha)-Al2O3(0001)

The radiation-induced decomposition and desorption of nanoscale amorphous solid water (D2O) films adsorbed on -Al2O3(0001) surface was studied at low temperature in ultrahigh vacuum using temperature programmed desorption (TPD) and electron stimulated desorption (ESD) with a mono-energetic, low energy electron source. ESD yields of molecular products ( D2, O2 and D¬2O) and the total sputtering yield increased with increasing D2O coverage up to ~15 water monolayers (i.e. ~15 1015 cm-2) to a coverage-independent level for thicker water films. Experiments with isotopically-layered water films (D2O and H2O) demonstrated that the highest water decomposition yields occurred at the interfaces of the nanoscale water films with the alumina substrate and vacuum. However, the increased reactivity of the water/alumina interface is relatively small compared to the enhancements in the non-thermal reactions previously observed at the water/Pt(111) and water/TiO2(110) interfaces. We propose that the relatively low activity of Al2O3(0001) for the radiation-induced production of molecular hydrogen is associated with lower reactivity of this surface with hydrogen atoms, which are likely precursors for the molecular hydrogen.

Petrik, Nikolay G.↗
DOE OSTI2018

Water at surfaces and interfaces: From molecules to ice and bulk liquid

The structure and growth of water films on surfaces is reviewed, starting from single molecules to two-dimensional wetting layers, and liquid interfaces. This progression follows the increase in temperature and vapor pressure from a few degrees Kelvin in ultra-high vacuum, where Scanning Tunneling and Atomic Force Microscopies (STM and AFM) provide crystallographic information at the molecular level, to ambient conditions where surface sensitive spectroscopic techniques provide electronic structure information. We show how single molecules bind to metal and non-metal surfaces, their diffusion and aggregation. We examine how water molecules can be manipulated by the STM tip via excitation of vibrational and electronic modes, which trigger molecular diffusion and dissociation. We review also the adsorption and structure of water on non-metal substrates including mica, alkali halides, and others under ambient humid conditions. Finally, we discuss recent progress in the exploration of the molecular level structure of solid-liquid interfaces, which impact our fundamental understanding of corrosion and electrochemical processes.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2017

Dynamic interface rearrangement in LaFeO 3 / n - SrTiO 3 heterojunctions

Thin-film synthesis methods that have developed over the past decades have unlocked emergent interface properties ranging from conductivity to ferroelectricity. However, our attempts to exercise precise control over interfaces are constrained by a limited understanding of growth pathways and kinetics. In this paper, we demonstrate that shuttered molecular beam epitaxy induces rearrangements of atomic planes at a polar/nonpolar junction of LaFeO 3 (LFO)/n-SrTiO 3 (STO) depending on the substrate termination. Surface characterization confirms that substrates with two different (TiO 2 and SrO) terminations were prepared prior to LFO deposition; however, local electron-energy-loss spectroscopy measurements of the final heterojunctions show a predominantly LaO/TiO 2 interfacial junction in both cases. Ab initio simulations suggest that the interfaces can be stabilized by trapping extra oxygen (in LaO/TiO 2 ) and forming oxygen vacancies (in FeO 2 /SrO), which points to different growth kinetics in each case and may explain the apparent disappearance of the FeO 2 /SrO interface. Finally, we conclude that judicious control of deposition time scales can be used to modify growth pathways, opening new avenues to control the structure and properties of interfacial systems.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Electrical conductivity in Langmuir-Blodgett films of n-alkyl cyanobiphenyls using current sensing atomic force microscope

We report our studies on the nanoscale electrical conductivity in monolayers of n-alkyl cyanobiphenyl materials deposited on solid surface. Initially, the 8CB, 9CB, and 10CB monolayer films were prepared by the Langmuir technique at air-water interface and characterized by surface manometry and Brewster angle microscopy. The monolayer films were transferred on to solid substrates by the Langmuir-Blodgett (L-B) technique. The 8CB, 9CB, and 10CB monolayer L-B films were deposited on freshly cleaved mica and studied by atomic force microscope (AFM), thereby measuring the film thickness as ∼1.5 nm. The electrical conductivity measurements were carried out on 9CB and 10CB monolayer L-B films deposited onto highly ordered pyrolytic graphite using current sensing AFM. The nanoscale current-voltage (I-V) measurements show a non-linear variation. The nature of the curve indicates electron tunneling to be the mechanism for electrical conduction. Furthermore, analysis of the I-V curve reveals a transition in the electron conduction mechanism from direct tunneling to injection tunneling. From the transition voltage, we have estimated the values of barrier height for 9CB and 10CB to be 0.71 eV and 0.37 eV, respectively. For both 9CB and 10CB, the effective mass of electron was calculated to be 0.021 m{sub e} and 0.065 m{sub e}, respectively. These parameters are important in the design of molecular electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Tuning Interface Electronic Properties via Chiral Two‐Dimensional Metal‐Organic Frameworks

Control over structural symmetries in nanomaterials offers a powerful approach to engineer electronic properties. For instance, breaking of mirror symmetries in two-dimensional (2D) materials with a hexagonal lattice can lead to nontrivial electronic topologies and correlated-electron phenomena. Yet, the impact of structural chirality on the electronic properties of 2D materials and interfaces remains underexplored. Here, how chiral phases of a 2D metal-organic framework (MOF) with a hexagonal lattice—consisting of hexaazatriphenylene molecules coordinated to Cu atoms—scatter, confine, and perturb the Shockley surface state (SS) electrons of an underlying Ag(111) substrate is investigated. Via low-temperature scanning tunneling microscopy and spectroscopy, noncontact atomic force microscopy, and numerical calculations based on an electronic plane-wave expansion method, modifications of the Ag(111) SS band structure are shown and quantified, including gap openings and lifts of band degeneracies, driven exclusively by the structural chirality of the 2D MOF phases. These findings highlight how structural symmetries, in particular chirality, affect electronic states at material interfaces, expanding on the toolkit for designing 2D materials with tailored electronic properties.

band structure engineering↗
DOE OSTI2025

Nanometer Resolution Structure‐Emission Correlation of Individual Quantum Emitters via Enhanced Cathodoluminescence in Twisted Hexagonal Boron Nitride

Understanding the atomic structure of quantum emitters, often originating from point defects or impuritie, is essential for designing and optimizing materials for quantum technologies such as quantum computing, communication, and sensing. Despite the availability of atomic-resolution scanning transmission electron microscopy and nanoscale cathodoluminescence microscopy, experimentally determining the atomic structure of individual emitters is challenging due to the conflicting needs for thick samples to generate strong cathodoluminescence signals and thin samples for structural analysis. To overcome this challenge, significantly enhanced cathodoluminescence at twisted interfaces is leveraged to achieve sub-nanometer localization precision for the first time in mapping individual quantum emitters in carbon-implanted hexagonal boron nitride. This unprecedent spatial sensitivity, together with correlative electron energy loss spectroscopy quantitative scanning transmission electron microscopy imaging, and first principles density functional theory calculations, enables the identification of the atomic structure of the 440 nm blue emitter in hexagonal boron nitride as a substituted vertical carbon dimer. Building on the atomic structure insights, nanoscale spatially precise creation of blue emitters is demonstrated by electron beam irradiation of carbon-coated hexagonal boron nitride. This advancement in correlating atomic structures with optical properties lays the foundation for a deeper understanding and precise engineering of quantum emitters, significantly advancing the development of cutting-edge quantum information technologies.

2D material↗
DOE OSTI2014

On the Importance of Metal–Oxide Interface Sites for the Water–Gas Shift Reaction Over Pt/CeO2 Catalysts

The mechanism of water–gas shift reaction at the three-phase boundary of Pt/CeO2 catalysts has been investigated using density functional theory and microkinetic modeling to better understand the importance of metal–oxide interface sites in heterogeneous catalysis. Analysis of a microkinetic model based on parameters obtained from first principles suggests that both the “Redox pathway” and the “Associative carboxyl pathway with redox regeneration” could operate on Pt/CeO2 catalysts. Although (1) only few interfacial Pt atoms are found to be catalytically active at low temperatures due to strong adsorption of CO and (2) interfacial O–H bond breakage is difficult due to the high reducibility of ceria, interface sites are 2–3 orders of magnitude more active than Pt (1 1 1) and stepped Pt surface sites and therefore effectively determine the overall activity of Pt/CeO2. The high activity of Pt/CeO2 interface sites originates from a significantly enhanced water activation and dissociation at interfacial oxygen vacancies.

Environmental Molecular Sciences Laboratory↗