SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Post-synthetic ligand modification to generate chiral CsPbBr 3 NPs.
The objective of this project is to develop Tribocoating; an innovative, rapid, low-cost, energy-efficient, and environmentally friendly coating technology designed to enhance the performance and durability of bearings and gears operating under harsh conditions. Tribocoating creates protective metal-oxide tribofilms through in-situ tribosintering of nanocrystals (NCs). Components are simply run in a nano-enabled Tribocoating fluid prior to deployment; no surface pretreatment, coating equipment, or external energy input is required.
The development of new neutron detectors to replace helium-3 (3He) detectors is imperative due to a worldwide shortage of 3He following the draw down in nuclear weapons production since the end of the Cold War. The United States Department of Homeland Security would like to deploy monitors for the detection of neutron emissions from shipping containers housing illicit nuclear material; however, this effort has been put on hold until new replacements for 3He detectors can be developed. Scintillation Hydro-Gel for isotopic Neutron Emitters (SHINE) is a unique, first of its kind, 6Li-loaded quantum dot gel scintillator developed at INL. By incorporating 6Li with quantum dots in a gel matrix, SHINE displays the best properties of liquid and solid scintillators without their disadvantages such as continuous filtering to keep liquids free of contaminates, slow throughput of containers, higher base component costs, ‘dead’ voids in solid scintillators, and a high loading of 6Li without compromising on light transparency. Additionally, SHINE is completely eco-friendly, a breakthrough in high-efficiency detection systems. SHINE is a unique combination of 6LiCl, a highly water-soluble compound, and InP/ZnS core/shell quantum dots, which are poured into a gel-form using cross-linking polymers. In this presentation, SHINE has been successfully tested for neutron detection and shows promise as both a replacement for current 3He neutron detectors as well as potential use in handheld, compact neutron detection units and antineutrino detection.
Broadband pump–probe spectroscopy has been widely used to measure vibrational decoherence associated with the reaction coordinate in photoinduced ultrafast vibration-coupled electron transfer (VCET) reactions. These experiments provide insight into the interplay of intramolecular coordinates along the reaction coordinate. However, a general theoretical foundation for analyzing, and even for explaining rigorously, these data is lacking. In this work, we study vibrational decoherence in a model VCET reaction using the nearly exact time-dependent density matrix renormalization group simulation method. We explore how analyzing the density matrix with quantum information measures can help elucidate the evolution of vibrational coherence in simulations of dynamics. We examine how vibrational coherence is affected by electron transfer on the timescale of approximately 100 femtoseconds. Our results suggest that electron transfer, in the nonadiabatic model, changes the vibrational equilibrium position abruptly—an example of a “quantum quench” event. This explains the concomitant vibrational decoherence. We find that abrupt vibrational decoherence can be mitigated by wavepacket motion occurring on the timescale of the electron transfer.
The NSF/DOE funding described in this final report was for constructing a substantial upgrade that would enable operation at variable and much lower cryogenic temperatures than was available in a previous experiment that operated from 2013 to 2019. Components for the upgraded experiment were designed and ordered from August to December 2019 and assembly began in early 2020. However, COVID-19 halted all lab work for much of 2020 and then when lab work resumed, numerous restrictions on lab access and in-lab time further impeded progress. Because of these delays, first plasma was obtained in late 2021 and a normal work pace resumed only in mid-2022. A no-cost extension was requested because the COVID-19 delays prevented work from being done at the anticipated rate. Constructing a water-ice experiment was a significant gamble because the parameter regime differs substantially from conventional laboratory plasmas and injecting water vapor into a plasma goes very much against convention as one normally goes to great lengths to avoid water vapor. This experiment opens a new frontier, namely the study of how charged ice grains form, grow, and interact with a plasma environment. The just-completed upgrade was a further gamble because it combines technology never previously used together (cryocoolers, plasma, and ice).
Explore the source record for details and available documents.
Highlights: • Review of theoretical and experimental advances in Floquet engineering. • Review of theories to derive effective Floquet Hamiltonians, with a focus on the low-frequency regime. • Review of the theoretical effects of light in Moiré materials. We review recent work on low-frequency Floquet engineering and its application to quantum materials driven by light, focusing on van der Waals systems hosting Moiré superlattices. These non-equilibrium systems combine the twist-angle sensitivity of the band structure with the flexibility of light drives. The frequency, amplitude, and polarization of light can be tuned in experimental setups, leading to platforms with on-demand properties. First, we review recent theoretical developments to derive effective Floquet Hamiltonians, emphasizing the low-frequency regime. We then review applications of some of these theories to study twisted graphene and transition metal dichalcogenide systems irradiated by light in free space and inside a waveguide. We study the changes induced in the quasienergies and steady-states, which can lead to topological transitions. Next, we consider van der Waals magnetic materials driven by low-frequency light pulses in resonance with the phonons. We discuss the phonon dynamics induced by the light and the resulting magnetic transitions from a Floquet perspective. We finish by outlining new directions for Moiré–Floquet engineering in the low-frequency regime and their relevance for technological applications.
Quantum information science still requires basic science research to achieve its full potential. However, scientists require access to fabricated device samples if we are to utilize the full toolset for solving the pressing issues in the field such as materials, device layout, or optimal error correction methods.Currently, access to samples is either prohibitively expensive, or requires close collaboration with one of the few groups in the world developing these systems. A dedicated quantum foundry could,in principle,provide affordable samples designed with current best practices to a host of scientists who otherwise do not have access. We detail several different foundry models which we believe will assist the community in developing the science for both the underlying processes, as well as the more advanced chip layout and circuit design. Opening access to the broader community has the potential to significantly lower the barrier to entry and vastly improve the ability for researchers in fields ranging from condensed matter to materials characterization to systems engineering to contribute to accelerating the advance of quantum information science and technology.
This research is focused on the development of novel semiconductor hetero-structured nanocrystals which can convert solar energy into hydrogen using photocatalytic water splitting reactions. The newly developed nanomaterials could produce cost-effective chemical fuel by employing less-energy intensive technology.
Abstract Interface engineering plays a critical role in advancing the performance of perovskite solar cells. As such, 2D/3D perovskite heterostructures are of particular interest due to their optoelectrical properties and their further potential improvements. However, for conventional solution‐processed 2D perovskites grown on an underlying 3D perovskite, the reaction stoichiometry is normally unbalanced with excess precursors. Moreover, the formed 2D perovskite is impure, leading to unfavorable energy band alignment at the interface. Here a simple method is presented that solves both issues simultaneously. The 2D formation reaction is taken first to completion, fully consuming excess PbI 2 . Then, isopropanol is utilized to remove excess organic ligands, control the 2D perovskite thickness, and obtain a phase‐pure, n = 2, 2D perovskite. The outcome is a pristine (without residual 2D precursors) and phase‐pure 2D perovskite heterostructure with improved surface passivation and charge carrier extraction compared to the conventional solution process. PSCs incorporating this treatment demonstrate a notable improvement in both stability and power conversion efficiency, with negligible hysteresis, compared to the conventional process.
We present the first scanning tunneling microscopy (STM) image of hydrogenic acceptor wave functions in silicon. These acceptor states appear as square-ring-like features in STM images and originate from near-surface defects introduced by high-energy bismuth implantation into a silicon (001) wafer. Scanning tunneling spectroscopy confirms the formation of a p-type surface. Effective-mass and tight-binding calculations provide an excellent description of the observed square-ring-like features, confirming their acceptor character and attributing their symmetry to the light- and heavy-hole band degeneracy in silicon. A detailed understanding of the energetic and spatial properties of acceptor wave functions in silicon is essential for engineering large-scale acceptor-based quantum devices.
The ordering of organic (carbon-based) molecules into nanostructures drives useful materials properties for applications such as organic light emitting diodes, flexible batteries, and polymer nanocarriers. However, there is a current lack of techniques to measure this ordering. X-ray scattering techniques involving molecular resonances have shown promise in identifying molecular types, locations, and orientation. However, resonant soft X-ray scattering (RSoXS) techniques have not been developed even lacking basic optical models. The objectives achieved by this research were the development of methods, models, and analysis techniques that harness these resonant phenomena in X-ray scattering measurements to quantitatively probe ordering of organic molecules within devices and nanostructures. This award resulted in 11 peer reviewed publications with two others soon to be submitted. New physical models for X-ray scattering that accurately describe these complex molecular resonances enable measurements of how molecules assemble, orient and conform at the nanometer scale. These new techniques were applied to both organic electronic devices and aqueous nanoparticles being developed for hydrocarbon sequestration. This new measurement capability will enable characterization of structure-property relationships that lead to disruptive technologies of printable, stretchable, and biocompatible devices based on organic materials.
Not provided.
Above-ground nuclear explosions that interact with the surface of the earth entrain materials from the surrounding environment, influencing the resulting physical and chemical evolution of the fireball, which can affect the final chemical phase and mobility of hazardous radionuclides that are dispersed in the environment as fallout particles. The interaction of iron with a nuclear explosion is of specific interest due to the potential for iron to act as a redox buffer and because of the likelihood of significant masses of metals to be present in urban environments. We investigated fallout from a historic surface interacting nuclear explosion conducted on a steel tower and report the discovery of widespread and diverse iron-rich micro-structures preserved within the samples, including crystalline dendrites and micron-scale iron-rich spheres with liquid immiscibility textures. We assert these micro-structures reflect local redox conditions and cooling rates and can inform interpretation of high temperature events, enabling new insights into fireball condensation physics and chemistry when metals from the local environment (i.e. structural steel) are vaporized or entrained. Finally, these observations also significantly expand the availability of silicate immiscibility datasets applicable to rapidly quenched systems such as meteorite impact melt glass.
Not provided.
A recently completed LDRD project has provided a new facility at Sandia for testing effects of energetic neutrons on electronic components. 14 MeV neutrons are produced with a deuterium ion beam onto a thin-film tritide target. The goal of the project was to increase the neutron fluence to levels needed for radiation effects testing and qualification. This goal was achieved through two technical advances. First, a new multi-layer target concept was developed to reduce the rate of tritium loss from the target by isotope exchange, thereby reducing tritium usage and increasing target lifetime. The second advance was the construction of a new test chamber designed to maximize neutron flux at test locations. Together, these increased the available neutron fluence by several orders of magnitude. This new capability is being used in tests for Sandia nuclear weapon programs, evaluation of commercial parts such as highly-scaled CMOS SRAM lCs, and tests of new devices under development at Sandia such as lll-V HBTs, gallium nitride high-voltage diodes, and for fundamental studies of physical mechanisms of device failure.
University partnerships play an essential role in sustaining Sandia’s vitality as a national laboratory. The SAA is an element of Sandia’s broader University Partnerships program, which facilitates recruiting and research collaborations with dozens of universities annually. The SAA program has two three-year goals. SAA aims to realize a step increase in hiring results, by growing the total annual inexperienced hires from each out-of-state SAA university. SAA also strives to establish and sustain strategic research partnerships by establishing several federally sponsored collaborations and multi-institutional consortiums in science & technology (S&T) priorities such as autonomy, advanced computing, hypersonics, quantum information science, and data science. The SAA program facilitates access to talent, ideas, and Research & Development facilities through strong university partnerships. Earlier this year, the SAA program and campus executives hosted John Myers, Sandia’s former Senior Director of Human Resources (HR) and Communications, and senior-level staff at Georgia Tech, U of Illinois, Purdue, UNM, and UT Austin. These campus visits provided an opportunity to share the history of the partnerships from the university leadership, tours of research facilities, and discussions of ongoing technical work and potential recruiting opportunities. These visits also provided valuable feedback to HR management that will help Sandia realize a step increase in hiring from SAA schools. The 2020-2021 Collaboration Report is a compilation of accomplishments in 2020 and 2021 from SAA and Sandia’s valued SAA university partners.
Abstract not provided.